Test Photos SAR

FCC ID: PYASTT

Test Setup Photos

Download: PDF
FCCID_2806219

____________________________________________________________________________ Test Setup photos for RM-1104 SAR Compliance Test Report Test report no.: SAR_Photo_RM-1104_06 Date of report: 2015-09-10 Template version: 20.0 Number of pages: 7 Testing laboratory: TCC Microsoft Salo Laboratory Client: Microsoft P.O.Box 303 P.O.Box 303 Joensuunkatu 7E Joensuunkatu 7 FIN-24101 SALO, FINLAND FIN-24101 SALO, FINLAND Tel. +358 71 800 8000 Tel. +358 71 800 8000 Fax. +358 71 80 44122 Fax. +358 71 80 44122 Responsible test Juha-Matti Varjonen Product contact Jari Rontu engineer: person: Measurements made J-P Karppanen, Marko Laaksonen, by: Eva Lehtinen, Jesse Louhola, Teuvo Miettinen, Sami Savela, Jani Tuomela, J-M Varjonen Tested device: RM-1104, HW: 2012. RM-1118, HW: 2060 FCC ID: PYASTT IC: 661X-STT Supplement reports: FCC_RM-1104_05 Testing has been 47CFR §2.1093 carried out in Radiofrequency Radiation Exposure Evaluation: Portable Devices accordance with: FCC published RF exposure KDB procedures RSS-102, Issue 5 Evaluation Procedure for Mobile and Portable Radio Transmitters with Respect to Health Canada’s Safety Code 6 for Exposure of Humans to Radio Frequency Fields IEEE 1528 - 2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Technique Documentation: The documentation of the testing performed on the tested devices is archived for 15 years at TCC Microsoft. Test results: The tested device complies with the requirements in respect of all parameters subject to the test. The test results and statements relate only to the items tested. The test report shall not be reproduced except in full, without written approval of the laboratory. Date and signatures: Digitally signed by Juha-Matti Varjonen For the contents: DN: cn=Juha-Matti Varjonen, o, ou, email=juha- matti.varjonen@microsoft.com, c=FI Date: 2015.09.10 14:34:58 +03'00' SAR Report Type: RM-1104 SAR_Photo_RM-1104_06 Applicant: Microsoft Copyright  2015 TCC Microsoft 1/7

____________________________________________________________________________ CONTENTS 1. PICTURE OF THE DEVICE.................................................................................................................................................. 3 2. TEST POSITIONS .................................................................................................................................................................. 4 2.1 AGAINST PHANTOM HEAD................................................................................................................................................... 4 2.2 BODY-WORN 15 MM CONFIGURATION.............................................................................................................................. 4 2.3 WIRELESS ROUTER 10 MM CONFIGURATION ..................................................................................................................... 5 3. DESCRIPTION OF THE ANTENNA ................................................................................................................................ 7 SAR Report Type: RM-1104 SAR_Photo_RM-1104_06 Applicant: Microsoft Copyright  2015 TCC Microsoft 2/7

____________________________________________________________________________ 1. PICTURE OF THE DEVICE SAR Report Type: RM-1104 SAR_Photo_RM-1104_06 Applicant: Microsoft Copyright  2015 TCC Microsoft 3/7

____________________________________________________________________________ 2. TEST POSITIONS 2.1 Against Phantom Head Measurements were made in “cheek” and “tilt” positions on both the left hand and right hand sides of the phantom. The positions used in the measurements were according to IEEE 1528 "IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques". Photo of the Device in "Cheek" position Photo of the Device in "Tilt" position 2.2 Body-worn 15 mm Configuration The device was placed in the SPEAG holder using the Microsoft spacer and placed below the flat phantom. The distance between the device and the phantom was kept at the separation distance indicated in the photo below using a separate flat spacer that was removed before the start of the measurements. The device was oriented with both sides facing the phantom to find the highest results. Photo of the device positioned for Body SAR measurement. The spacer was removed for the tests. Microsoft Body-worn accessories are commonly available for the separation distance used in this testing. SAR Report Type: RM-1104 SAR_Photo_RM-1104_06 Applicant: Microsoft Copyright  2015 TCC Microsoft 4/7

____________________________________________________________________________ 2.3 Wireless Router 10 mm Configuration The device was placed in the SPEAG holder using the Microsoft spacer and, in sequence, the back, display and each of the 4 edges was positioned 10 mm away from the flat phantom. The spacer was removed before the start of the measurements. Photo of the device positioned for WR mode measurement –back facing phantom. The spacer was removed before the start of the measurements. Photo of the device positioned for WR mode measurement – display facing phantom. The spacer was removed before the start of the measurements. Photo of the device positioned for WR mode measurement – top edge facing phantom. The spacer was removed before the start of the measurements. SAR Report Type: RM-1104 SAR_Photo_RM-1104_06 Applicant: Microsoft Copyright  2015 TCC Microsoft 5/7

____________________________________________________________________________ Photo of the device positioned for WR mode measurement – bottom edge facing phantom. The spacer was removed before the start of the measurements. Photo of the device positioned for WR mode measurement – left edge facing phantom. The spacer was removed before the start of the measurements. Photo of the device positioned for WR mode measurement – right edge facing phantom. The spacer was removed before the start of the measurements SAR Report Type: RM-1104 SAR_Photo_RM-1104_06 Applicant: Microsoft Copyright  2015 TCC Microsoft 6/7

____________________________________________________________________________ 3. DESCRIPTION OF THE ANTENNA The device has 2 separate internal antennas for cellular, AWS and PCS use. The cellular antennas are located at left bottom and at right bottom underneath the back cover. Additionally, the device has 2 separate internal antennas for WLAN use. The main WLAN antenna for 2.4 and 5 GHz is located at right top of the device. The secondary WLAN antenna for 2.4GHz is located at left bottom edge, and the secondary WLAN antenna for 5 GHz is located at top edge beside the WLAN main antenna. SAR Report Type: RM-1104 SAR_Photo_RM-1104_06 Applicant: Microsoft Copyright  2015 TCC Microsoft 7/7


Document Created: 2015-09-10 14:34:59
Document Modified: 2015-09-10 14:34:59
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC