06_Test report (WLAN_5.8GHz)

FCC ID: PY7TM-0042

Test Report

Download: PDF
FCCID_2223774

PARTIAL TEST REPORT No.: 2-20823287p/13 According to: FCC Regulations Part 15.109, Part 15.209, Part 15.247 for Sony Mobile Communications Tablet PC (W-LAN 5.7 GHz-Band) FCC-ID: PY7TM-0042 Laboratory Accreditation and Listings Voluntary Controls for Industry Canada Electromagnetic Emissions Reg. No.: 3462D-1 Reg. No.: Reg. No.: 736496 Reg. No.: 3462D-2 MRA US-EU 0003 R-2666 C-2914, Reg. No.: 3462D-3 T-1967, G-301 accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: info@cetecom.com • Internet: www.cetecom.com Page 1 of 25 The test results relate only to the individual items which have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM

Test Report 2-20823287p/13, Page 2 of 25 Table of contents 1. SUMMARY OF TEST RESULTS...................................................................................................................... 3 1.1. Tests overview of US CFR .............................................................................................................................. 3 2. ADMINISTRATIVE DATA ............................................................................................................................... 5 2.1. Identification of the testing laboratory ............................................................................................................. 5 2.2. Test location .................................................................................................................................................... 5 2.3. Organizational items ........................................................................................................................................ 5 2.4. Applicant’s details ........................................................................................................................................... 5 2.5. Manufacturer’s details ..................................................................................................................................... 5 3. EQUIPMENT UNDER TEST (EUT) ................................................................................................................. 6 3.1. TECHNICAL DATA OF MAIN EUT DECLARED BY APPLICANT ......................................................... 6 3.2. EUT: Type, S/N etc. and short descriptions used in this test report ................................................................ 6 3.3. Auxiliary Equipment (AE): Type, S/N etc. and short descriptions .................................................................. 7 3.4. EUT set-ups ..................................................................................................................................................... 7 3.5. EUT operating modes ...................................................................................................................................... 7 3.6. Configuration of cables used for testing .......................................................................................................... 7 4. DESCRIPTION OF TEST SYSTEM SET-UP’S .............................................................................................. 8 4.1. Test system set-up for radiated magnetic field measurements below 30 MHz ................................................ 8 4.2. Test system set-up for radiated electric field measurement 30 MHz to 1 GHz ............................................... 9 4.3. Test system set-up for radiated electric field measurement above 1 GHz ....................................................... 10 5. MEASUREMENTS ............................................................................................................................................. 11 5.1. General Limit - Radiated field strength emissions below 30 MHz .................................................................. 11 5.2. General Limit - Radiated field strength emissions, 30 MHz - 1 GHz .............................................................. 13 5.3. General Limit - Radiated emissions, above 1 GHz .......................................................................................... 16 5.4. Radiated Band-Edge compliance, field strength measurements accord. §15.247 ............................................ 18 5.5. Measurement uncertainties .............................................................................................................................. 20 6. ABBREVIATIONS USED IN THIS REPORT ................................................................................................. 20 7. ACCREDITATION DETAILS OF CETECOM’S LABORATORIES AND TEST SITES ......................... 21 8. INSTRUMENTS AND ANCILLARY ................................................................................................................ 22 8.1. Used equiment “CTC” ..................................................................................................................................... 22 Table of annex Total pages Annex 1: External photographs of EUT, document TR2_20823287_13-A1 8 Annex 2: Test set-up photographs, document TR2_20823287_13-A2 5 Annex 3: Internal photographs of EUT, document TR2_20823287_13-A3 2 Annex 4: Measurement diagrams, document TR2_20823287p_13-A4 35 The listed attachments are an integral part of this report. TR2_20823287p_13

Test Report 2-20823287p/13, Page 3 of 25 1. Summary of test results The test results apply exclusively to the test samples as presented in this Report. The CETECOM GmbH does not assume responsibility for any conclusions and generalizations taken in conjunction with other specimens or samples of the type of the item presented to tests. The presented Equipment Under Test (in this report, hereinafter referred as EUT) supports radiofrequency technologies with WLAN technology and operating frequency range at 5.725 to 5.850 GHz according to IEEE 802.11 b/g/n/a/ac. Other implemented wireless technologies were not considered within this test report. Only radiated tests have been performed, for conducted results pls. check test report no. 1-6965/13-05-18-A, for product TM-0040-BV, dated 2014-01-22. The selection of radiated test cases was made on information of the data rates with the maximum conducted output power provided by the test report no. 1-6965/13-05-10-A, for product TM-0040-BV, dated 2014-01-22. Following test cases have been performed to show compliance with valid Part 15.207/15.209/15.247 of the FCC CFR 47 Rules, Edition 1th Oct 2013. 1.1. Tests overview of US CFR References & Limits EUT EUT opera- Test cases Port FCC Result RSS Section Test Limit set-up ting Standard mode TX-Mode 6 dB Antenna Not tested bandwidth terminal ≥ 500 kHz for within this §15.247(a)(2) -- -- test (conducted) DTS systems report* 99% occupied Antenna Not tested bandwidth terminal 99% Power within this -- -- -- test (conducted) bandwidth report* Transmitter Antenna Not tested Peak output terminal within this §15.247(b)(3) 1 Watt Peak -- -- test power (conducted) report* Transmitter < 4 Watt (EIRP) Peak output Cabinet for antenna with §15.247(b)(4) 1 1 passed power (radiated) directional gain radiated less 6dBi Out-Of-Band Antenna Not tested RF- emissions terminal (conducted) within this §15.247 (d) 20 dBc -- test Band-Edge report* emissions Power spectral Antenna Not tested density terminal 8dBm in any within this §15.247(e) -- -- test (conducted) 3 kHz band report* Transmitter Antenna Not tested Operation within frequency terminal within this -- designated -- -- test stability (conducted) operational band report* General field Cabinet + Emissions in strength Inter- restricted bands §15.247 (d) emissions + connecting must meet the §15.205 1 1 passed restricted cables general field- (radiated) §15.209 bands strength radiated limits TR2_20823287p_13

Test Report 2—20823287p/13, Page 4 of25 Out—Of—Band |Cabinet + cerecom" RF— emissions Inter— connecting §15.247 (d) 20 dBc 1 1 Passed Band—Edge cables emissions (radiated) AC—Power AC—Power §15.207 FCC §15.107 Lines lines class B limits Not tested §15.207 limits _ _ within this Conducted test Emissions IC: Table 4, report* Chapter 7.2.4 RX Mode RECEIVER |Cabinet+ §15.109 FCC 15.109 Inter— §15.33 class B limits Radiated connecting §15.35 20 1 2 passed emissions cables IC—limits: (radiated) Table 1, Chapter 6 Remark: * see test report 1—6965/13—05—18—A f wet gelgilp 4) jap Th CETEEOANM ’A.) «_ Dipl.—Ing. Niels JeB Dipl.—Ing. C. Lorenz Responsible for test section Responsible for test report TR2_20823287p_13

Test Report 2-20823287p/13, Page 5 of 25 2. Administrative Data 2.1. Identification of the testing laboratory Company name: CETECOM GmbH Address: Im Teelbruch 116 45219 Essen - Kettwig Germany Responsible for testing laboratory: Dipl.-Ing. Niels Jeß Deputy: Dipl.-Ing. Rachid Acharkaoui 2.2. Test location 2.2.1. Test laboratory “CTC” Company name: see chapter 2.1. Identification of the testing laboratory 2.3. Organizational items Project leader and responsible for test report: Dipl.-Ing. C. Lorenz Receipt of EUT: 2014-03-11 Date(s) of test: 2014-03-12, 2014-03-14 Date of report: 2014-03-18 ----------------------------------------------------------------------------------------------------------------------------------------------------- Version of template: 13.02 2.4. Applicant’s details Applicant’s name: Sony Mobile Communications AB Address: Nya Vattentornet 22188 Lund Sweden Contact person: Mr. Mikael Nilson 2.5. Manufacturer’s details Manufacturer’s name: please see Applicant's details Address: please see Applicant's details TR2_20823287p_13

Test Report 2-20823287p/13, Page 6 of 25 3. Equipment under test (EUT) 3.1. TECHNICAL DATA OF MAIN EUT DECLARED BY APPLICANT Main function Tablet PC with integrated W-LAN Transceiver Frequency range  5725MHz to 5825 MHz Type of modulation (packet types)  BPSK  QPSK  16-QAM  64-QAM  256-QAM Number of channels  20MHz bandwidth: Ch. 149/153/157/161/165 (USA/Canada -bands)  40MHz bandwidth: Ch. 151/159  80MHz bandwidth: Ch. 155 Antenna Type  Integrated  External, no RF- connector  External, separate RF-connector Antenna Gain Maximum 0.9 dBi gain at 5.725GHz (<6dB accord. §15.247) MIMO  no: SISO  yes: -- FCC-ID PY7TM-0042 Installed options  Cellular telephone: GSM/(E)-GPRS/W-CDMA/LTE  W-LAN, Bluetooth®LE, ANT+ wireless technologie  battery charging option  GPS (not tested within this test report) Power supply  Internal battery Li-Io, range 3.2V to 4.2 V (nominal 3.7 V)  over AC/DC adapter: 120V/60 Hz Special EMI components -- EUT sample type  Production  Pre-Production  Engineering Firmware  for normal use  Special version for test execution FCC label attached  yes  no 3.2. EUT: Type, S/N etc. and short descriptions used in this test report Short S/N HW SW descrip- EUT Type serial number hardware status software status tion*) CB5126DPP9 ETS Version: EUT A Tablet PC PY7TM-0042 IMEI ID: AP1 00440245- 1278-7011 223649-4 *) EUT short description is used to simplify the identification of the EUT in this test report. TR2_20823287p_13

Test Report 2-20823287p/13, Page 7 of 25 3.3. Auxiliary Equipment (AE): Type, S/N etc. and short descriptions AE S/N HW SW short Auxiliary Equipment Type serial number hardware status software status descrip- tion *) AE 1 AC-Adapter EP850 CAA-00004008 BV #21362 AP1.4 -- AE 2 USB cable EC700 1225-7196.1 -- -- Windows XP + AE 3 Notebook Dell D2120 CTC# -- Terminal SW+ USB Driver *) AE short description is used to simplify the identification of the auxiliary equipment in this test report. 3.4. EUT set-ups EUT set-up Combination of EUT and AE Remarks no.*) Used for radiated tests. AE3 disconnected from set. 1 EUT A + AE1 + AE2 + (AE3) set-up after successful communication set-up. *) EUT set-up no. is used to simplify the identification of the EUT set-up in this test report. 3.5. EUT operating modes EUT Description of operating operating Additional information modes mode no.*) With help of special test firmware a continuous traffic mode op. 1 WLAN Continuous TX-Mode could be established. Syntax for each specific command was set according applicant’s supplied data sheet. The EUT was put to receiver mode only with help of a special op. 2 WLAN Continuous RX-Mode firmware software. *) EUT operating mode no. is used to simplify the test report. 3.6. Configuration of cables used for testing Cable S/N HW Cable length number Item Type serial number hardware status Cable 1 USB cable EC700 1225-7196.1 -- -- TR2_20823287p_13

Test Report 2-20823287p/13, Page 8 of 25 4. Description of test system set-up’s 4.1. Test system set-up for radiated magnetic field measurements below 30 MHz Specification: ANSI C63.4-2009 chapter 8.2.1, ANSI C63.10-2009 chapter 6.4 General Description: Evaluating the radiated field emissions are done first by an exploratory emission measurement and a final measurement for most critical frequencies determined. The loop antenna was placed at 1 m height above ground plane and 3 m measurement distance from set-up for investigations. Because of reduced measurement distance, correction data were applied, as stated in chapter “General Limit - Radiated field strength emissions below 30 MHz“. The tests are performed in the semi anechoic room recognized by the regulatory commission. Schematic: Testing method: Exploratory, preliminary measurement Final measurement on critical frequencies The EUT and it’s associated accessories are Based on the exploratory measurements, the most placed on a non-conductive position manipulator critical frequencies are re-measured by main- (tipping device) of 0.8 m height which is placed taining the EUT’s worst-case operation mode, on the turntable. By rotating the turntable (step cable position, etc. 90°, range 0°to 360°) and the EUT itself either on 3-orthogonal axis (portable equipment) or 2- First a frequency zoom around the critical orthogonal axis (defined operational position of frequency is done to locate the frequency more EUT), the emission spectrum was recorded. The precisely. After this step, for all identified critical loop antenna was moved at least to frequencies, the maximum peak was determined. 2-perpendicular axes (antenna vector in direction of EUT and parallel to EUT) in order to Following parameters were varied: the turntable maximize the emissions. The results are angle continuously in the range 0 to 360 degree, documented in a diagram. Critical frequencies the EUT itself either over 3-orthogonal axis (not (low margin to limit) are saved within a data defined usage position) or 2-orthogonal axis reduction table for further investigations. If (defined usage position). various operating modes are supported, further investigations are made to find the worst-case. On the determined worst-case position, a final Also the interconnection cables and equipment measurement with necessary bandwidth and position were varied in order to maximize the detector according standard has been carried out. emissions. Formula: EC = ER + AF + CL + DF - GA AF =Antenna factor CL = Cable loss M = LT-EC DF= Distance correction factor EC = Electrical field – corrected value ER = Receiver reading GA= Gain of pre-amplifier (if used) LT = Limit M = Margin All units are dB-units, positive margin means value is below limit. Distance correction: Reference for applied correction (extrapolating) factors: IEEC Transaction EMC, Vol. 47, No. 3 , Aug. 2005, Journal Paper “Extrapolating Near-field emissions of low frequency loop transmitters”. TR2_20823287p_13

Test Report 2-20823287p/13, Page 9 of 25 4.2. Test system set-up for radiated electric field measurement 30 MHz to 1 GHz Specification: ANSI C63.4-2009 chapter 8, ANSI C63.10-2009 chapter 6.5 General Description: Evaluating the field emissions have to be done first by an exploratory emissions measurement and a final measurement for most critical frequencies. The tests are performed in a NSA-compliant semi anechoic room (SAR) recognized by the regulatory commissions. Schematic: Testing method: Exploratory, preliminary measurements Final measurement on critical frequencies The EUT and its associated accessories are Based on the exploratory measurements, the most placed on a non-conductive position manipulator critical frequencies are re-measured by main- (tipping device) of 0.8 m height which is placed taining the EUT’s worst-case operation mode, on the turntable. By rotating the turntable (range cable position, etc. 0° to 360°, step 90°) and the EUT itself either on 3-orthogonal axis (portable equipment) or 2- First a frequency zoom around the critical orthogonal axis (defined operational position of frequency is done to locate the frequency more EUT) the emission spectrum and it’s precisely. After this step, for all identified critical characteristics was recorded with an EMI- frequencies, the maximum peak was determined. receiver, broadband antenna and software. Following parameters were varied: the turntable Measurement antenna: horizontal and vertical, angle continuously in the range 0 to 360 degree, heights: 1,0 m and 1,82 m as worst-case the EUT itself either over 3-orthogonal axis (not determined by an exploratory emission defined usage position) or 2-orthogonal axis measurements. The results are documented in a (defined usage position). The measurement diagram. Critical frequencies (low margin to antenna height between 1 m and 4 m. limit) are saved within a table for further investigations. If various operating modes are On the determined worst-case position, a final supported, further investigations are made to find measurement with necessary bandwidth and the worst-case of them. Also the interconnection detector according standard has been carried out. cables and equipment position were varied in order to maximize the emissions. Formula: EC = ER + AF + CL + DF - GA (1) AF = Antenna factor CL = Cable loss M = LT - EC (2) DF = Distance correction factor (if used) EC = Electrical field – corrected value ER = Receiver reading GA = Gain of pre-amplifier (if used) LT = Limit M = Margin All units are dB-units, positive margin means value is below limit. TR2_20823287p_13

Test Report 2-20823287p/13, Page 10 of 25 4.3. Test system set-up for radiated electric field measurement above 1 GHz Specification: ANSI C63.4-2009 chapter 8, ANSI C63.10-2009 chapter 6.6 General Description: Evaluating the field emissions have to be done first by an exploratory emissions measurement and a final measurement for most critical frequencies. The tests are performed in a CISPR 16-4 compliant fully anechoic room (FAR) recognized by the regulatory commissions. The measurement distance was set to 3 meter for frequencies up to 20 GHz and 1 meter above 20 GHz. The horn antenna is used for frequency range 1 GHz to 40 GHz. Due to use of a fully anechoic room the measurement antennas are set to fixed antenna height of 1.55 m (no height scan necessary) and the site validation criteria accord. ANSI63.10:2009 is fulfilled. The EUT is aligned within 3 dB beam width of the measurement antenna, on big EUTs several surface measurements are performed. Schematic: Testing method: Exploratory, preliminary measurements Final measurement on critical frequencies The EUT and its associated accessories are Based on the exploratory measurements, the most placed on a non-conductive position manipulator critical frequencies are re-measured by main- (tipping device) of 1.55 m height which is placed taining the EUT’s worst-case operation mode, on the turntable. By rotating the turntable (range cable position, etc. 0° to 360°, step 45°) and the EUT itself either on 3-orthogonal axis (portable equipment) or 2- First a frequency zoom around the critical orthogonal axis (defined operational position of frequency is done to locate the frequency more EUT) the emission spectrum and it’s precisely. After this step, for all identified critical characteristics was recorded with an EMI- frequencies, the maximum peak was determined. receiver, broadband antenna and software. The measurements are performed in horizontal Following parameters were varied: the turntable and vertical polarization of the measurement angle continuously in the range 0 to 360 degree, antennas. The results are documented in a the EUT itself either over 3-orthogonal axis (not diagram. Critical frequencies (low margin to defined usage position) or 2-orthogonal axis limit) are saved within a table for further (defined usage position). The measurement investigations. If various operating modes are antenna height is fixed to 1.55 m. supported, further investigations are made to find the worst-case of them. Also the interconnection On the determined worst-case position, a final cables and equipment position were varied in measurement with necessary bandwidth and order to maximize the emissions. detector according standard has been carried out. Formula: EC = ER + AF + CL + DF - GA (1) EC = Electrical field – corrected value ER = Receiver reading M = LT - EC (2) M = Margin LT = Limit AF = Antenna factor CL = Cable loss DF = Distance correction factor (if used) GA = Gain of pre-amplifier (if used) All units are dB-units, positive margin means value is below limit. TR2_20823287p_13

Test Report 2-20823287p/13, Page 11 of 25 5. Measurements 5.1. General Limit - Radiated field strength emissions below 30 MHz 5.1.1. Test location and equipment test location  CETECOM Essen (Chapter. 2.2.1)  Please see Chapter. 2.2.2  Please see Chapter. 2.2.3 test site  441 EMI SAR  487 SAR NSA  347 Radio.lab.   receiver  377 ESCS30  001 ESS     spectr. analys.  584 FSU  120 FSEM  264 FSEK    antenna  574 BTA-L  133 EMCO3115  302 BBHA9170  289 CBL 6141  030 HFH-Z2  477 GPS signaling  392 MT8820A  436 CMU  547 CMU  594 CMW otherwise  400 FTC40x15E  401 FTC40x15E  110 USB LWL  482 Filter Matrix  378 RadiSense DC power  456 EA 3013A  457 EA 3013A  459 EA 2032-50  268 EA- 3050  494 AG6632A  498 NGPE 40 line voltage  230 V 50 Hz via public mains  060 120 V 60 Hz via PAS 5000 5.1.2. Requirements FCC Part 15, Subpart C, §15.205 & §15.209 ANSI C63.10-2009 Frequency Field strength limit Distance Remarks [MHz] [μV/m] [dBμV/m] [m] 0.009 – 0.490 2400/f (kHz) 67.6 – 20Log(f) (kHz) 300 Correction factor used due to measurement distance of 3 m 0.490 – 1.705 24000/f (kHz) 87.6 – 20Log(f) (kHz) 30 Correction factor used due to measurement distance of 3 m 1.705 – 30 30 29.5 30 Correction factor used due to measurement distance of 3 m 5.1.3. Test condition and test set-up Signal link to test system (if used):  air link  cable connection  none EUT-grounding  none  with power supply  additional connection Equipment set up  table top  floor standing Climatic conditions Temperature: (22±3°C) Rel. humidity: (40±20)%  9 – 150 kHz RBW/VBW = 200 Hz Scan step = 80 Hz Scan data  150 kHz – 30 MHz RBW/VBW = 9 kHz Scan step = 4 kHz  other: EMI-Receiver or Scan-Mode  6 dB EMI-Receiver Mode  3dB Spectrum analyser Mode Analyzer Settings Detector Peak (pre-measurement) and Quasi-PK/Average (final if applicable) Mode: Repetitive-Scan, max-hold Sweep-Time Coupled – calibrated display if continuous signal otherwise adapted to EUT’s individual transmission duty-cycle General measurement procedures Please see chapter “Test system set-up radiated magnetic field measurements below 30 MHz” 5.1.4. Measurement Results The results are presented below in summary form only. No critical peaks could be found on tested channels and modulation types (data rates) (Margin <10 dB). For more information please see the diagrams. Table of measurement results: Carrier Set- OP- Diagram Frequency Used detector Channel up mode Remark Result No. range no. no. Range No. PK AV QP 2.01 Low 149 1 1 a-Mode, 48Mbit    passed 9 kHz-30 MHz 2.02 Middle 155 1 1 AC80-Mode, MCS0    passed TR2_20823287p_13

Test Report 2-20823287p/13, Page 12 of 25 5.1.5. Correction factors due to reduced meas. distance (f< 30 MHz) The used correction factors when the measurement distance is reduced, are taken from IEEC Transaction EMC, Vol 47, No.3, Aug. 2005, Journal Paper “EXTRAPOLATING NEAR-FIELD EMISSIONS OF LOW-FREQUENCY LOOP TRANSMITTERS”. Used Transducer factors (f < 30 MHz) 1 2 3 4 5 6 =2+3+4+5 Frequency Antenna factor Corection factor Cable loss Transducer factor 300m to 3m 30m to 3m kHz dB µV/m dB dB dB dB µV/m 9,0 20,0 -116,7 0,0 -96,7 10,6 20,0 -116,7 0,0 -96,7 12,6 20,0 -116,7 0,0 -96,7 14,8 20,0 -116,7 0,0 -96,7 17,5 20,0 -116,6 0,0 -96,6 20,7 20,0 -116,6 0,0 -96,6 24,4 20,0 -116,6 0,0 -96,6 28,9 20,0 -116,6 0,0 -96,6 34,1 20,0 -116,5 0,0 -96,5 40,3 20,0 -116,4 0,0 -96,4 47,6 20,0 -116,3 0,0 -96,3 56,2 20,0 -116,2 0,0 -96,2 66,4 20,0 -116,0 0,0 -96,0 78,4 20,0 -115,8 0,0 -95,8 92,7 20,0 -115,4 0,0 -95,4 109,4 20,0 -115,0 0,0 -95,0 129,3 20,0 -114,5 0,0 -94,5 152,7 20,0 -113,9 0,0 -93,9 180,4 20,0 -113,1 0,0 -93,1 213,1 20,0 -112,2 0,0 -92,2 251,7 20,0 -111,3 0,0 -91,3 297,3 20,0 -108,3 0,0 -88,3 351,2 20,0 -105,2 0,0 -85,2 414,8 20,0 -102,1 0,0 -82,1 490,0 20,0 -99,1 0,0 -79,1 490,0 20,0 -56,4 0,1 -36,3 582,0 20,0 -56,2 0,1 -36,1 690,0 20,0 -56,0 0,2 -35,8 820,0 20,0 -55,7 0,2 -35,5 973,0 20,0 -55,4 0,2 -35,2 1.155,0 20,0 -54,9 0,3 -34,6 1.371,0 20,0 -54,4 0,3 -34,1 1.627,0 20,0 -53,7 0,3 -33,4 1.931,0 20,0 -52,9 0,4 -32,5 2.292,0 20,0 -52,0 0,4 -31,6 2.721,0 20,0 -49,8 0,5 -29,3 3.230,0 20,0 -46,6 0,5 -26,1 3.834,0 20,0 -43,3 0,6 -22,7 4.551,0 20,0 -40,1 0,6 -19,5 5.402,0 20,0 -36,8 0,7 -16,1 6.412,0 20,0 -33,5 0,7 -12,8 7.612,0 20,0 -30,3 0,8 -9,5 9.035,0 20,0 -27,0 0,8 -6,2 10.725,0 20,0 -23,9 0,9 -3,0 12.730,0 20,0 -21,2 0,9 -0,3 15.111,0 20,0 -19,3 1,0 1,7 17.937,0 20,0 -18,4 1,0 2,6 21.292,0 20,0 -18,2 1,1 2,9 25.274,0 20,0 -18,3 1,1 2,8 30.000,0 20,0 -18,4 1,2 2,8 5.1.6. VERDICT: PASS TR2_20823287p_13

Test Report 2-20823287p/13, Page 13 of 25 5.2. General Limit - Radiated field strength emissions, 30 MHz - 1 GHz 5.2.1. Test location and equipment test location  CETECOM Essen (Chapter. 2.2.1)  Please see Chapter. 2.2.2  Please see Chapter. 2.2.3 test site  441 EMI SAR  487 SAR NSA receiver  377 ESCS30  001 ESS  489 ESU 40  620 ESU 26 spectr. analys.  584 FSU  120 FSEM  264 FSEK antenna  574 BTA-L  133 EMCO3115  302 BBHA9170  289 CBL 6141  030 HFH-Z2  477 GPS signaling  392 MT8820A  436 CMU  547 CMU  594 CMW otherwise  400 FTC40x15E  401 FTC40x15E  110 USB LWL  482 Filter Matrix DC power  456 EA 3013A  457 EA 3013A  459 EA 2032-50  268 EA- 3050  494 AG6632A  498 NGPE line voltage  230 V 50 Hz via public mains  060 120 V 60 Hz via PAS 5000 5.2.2. Requirements/Limits  Part 15 Subpart B, §15.109, class B FCC  Part 15 Subpart C, §15.209 @ frequencies defined in §15.205  C63.4-2009 ANSI  C63.10-2009 Radiated emissions limits, 3 meters Frequency [MHz] QUASI Peak [µV/m] QUASI-Peak [dBµV/m] 30 - 88 100 40.0 Limit 88 - 216 150 43.5 216 - 960 200 46.0 above 960 500 49.0 5.2.3. Restricted bands of operation, §15.205 MHz MHz MHz GHz 0.090-0.110 16.42-16.423 399.9-410 4.5-5.15 0.495-0.505 16.69475-16.69525 608-614 5.35-5.46 2.1735-2.1905 16.80425-16.80475 960-1240 7.25-7.75 4.125-4.128 25.5-25.67 1300-1427 8.025-8.5 4.20725-4.20775 37.5-38.25 1645.5-1646.5 9.3-9.5 6.215-6.218 73-74.6 1660-1710 10.6-12.7 6.26775-6.26825 74.8-75.2 1718.8-1722.2 13.25-13.4 6.31175-6.31225 108-121.94 2200-2300 14.47-14.5 8.291-8.294 123-138 2310-2390 15.35-16.2 8.362-8.366 149.9-150.05 2483.5-2500 17.7-21.4 8.37625-8.38675 156.52475-156.52525 2690-2900 22.01-23.12 8.41425-8.41475 156.7-156.9 3260-3267 23.6-24.0 12.29-12.293 162.0125-167.17 3332-3339 31.2-31.8 12.51975-12.52025 167.72-173.2 3345.8-3358 36.43-36.5 12.57675-12.57725 240-285 3600-4400 -- 13.36-13.41 322-335.4 -- -- Remark: only spurious emissions are allowed within these frequency bands not exceeding the limits per §15.209 TR2_20823287p_13

Test Report 2-20823287p/13, Page 14 of 25 5.2.4. Test condition and measurement test set-up Signal link to test system (if used):  air link  cable connection  none EUT-grounding  none  with power supply  additional connection Equipment set up  table top 0.8m height  floor standing Climatic conditions Temperature: (22±3°C) Rel. humidity: (40±20)% EMI-Receiver Scan frequency range:  30 – 1000 MHz  other: (Analyzer) Settings Scan-Mode  6 dB EMI-Receiver Mode  3 dB spectrum analyser mode Detector Peak / Quasi-peak RBW/VBW 100 kHz/300 kHz Mode: Repetitive-Scan, max-hold Scan step 80 kHz Sweep-Time Coupled – calibrated display if continuous tx-signal otherwise adapted to EUT’s individual duty-cycle General measurement procedures Please see chapter “Test system set-up for electric field measurement in the range 30 MHz to 1 GHz” 5.2.5. MEASUREMENT RESULTS TX-MODE The results are presented below in summary form only. For more information please see diagrams enclosed in annex 4. Table of measurement results: Result Dia- Carrier Channel Set- OP- Used detector Frequency gram up mode Remark range no. no. no. Range No. PK AV QP a-Mode, 48Mbit 3.01 Low 149 1 1    passed Low Ch=149 20AC-Mode, MCS5 3.02 Middle 157 1 1    passed middle Ch=157 20n-Mode, 26MBit 3.03 High 165 1 1    passed 30 MHz – high Ch =165 1 GHz AC40-Mode MCS4 3.04 Low 151 1 1    passed LowCh=151 AC40-Mode MCS6 3.05 High 159 1 1    passed High Ch=159 AC80-Mode, MCS0 3.06 Middle 155 1 1    passed Ch=155 Remark: TR2_20823287p_13

Test Report 2-20823287p/13, Page 15 of 25 5.2.6. Requirements/Limits RX-Mode FCC  Part 15 Subpart B, §15.109, class B  Part 15 Subpart C, §15.209 @ frequencies defined in §15.205  C63.4-2009 ANSI  C63.10-2009 Radiated emissions limits, 3 meters Frequency [MHz] QUASI Peak [µV/m] QUASI-Peak [dBµV/m] 30 - 88 100 40.0 Limit 88 - 216 150 43.5 216 - 960 200 46.0 above 960 500 49.0 5.2.7. MEASUREMENT RESULTS RX-MODE The results are presented below in summary form only. For more information please see diagrams enclosed in annex 4. Table of measurement results: Result Dia- Carrier Channel Set- OP- Used detector Frequency gram up mode Remark range no. no. no. Range No. PK AV QP 30 MHz – 3.07 Middle 157 1 2 --    passed 1 GHz Remark: 5.2.8. VERDICT: PASS TR2_20823287p_13

Test Report 2-20823287p/13, Page 16 of 25 5.3. General Limit - Radiated emissions, above 1 GHz 5.3.1. Test location and equipment FAR test site  441 EMI SAR  348 EMI cond.  443 EMI FAR  347 Radio.lab.  337 OATS  spectr. analys.  584 FSU  120 FSEM  264 FSEK  489 ESU 40   antenna meas  574 BTA-L  289 CBL 6141  608 HL 562  549 HL025  302 BBHA9170  477 GPS antenna meas  123 HUF-Z2  132 HUF-Z3  030 HFH-Z2    antenna subst  071 HUF-Z2  020 EMCO3115  063 LP 3146  303 BBHA9170   multimeter  341 Fluke 112      signaling  392 MT8820A  436 CMU  547 CMU  594 CMW DCpower  086 LNG50-10  087 EA3013  354 NGPE 40  349 car battery  350 Car battery  line voltage  230 V 50 Hz via public mains  060 120 V 60 Hz via PAS 5000 5.3.2. Requirements/Limits TX-mode  Part 15 Subpart B, §15.109 class B FCC  Part 15 subpart C, §15.209 @ frequencies defined in §15.205  C63.4-2009 ANSI  C63.10-2009 Limits, 3 meters Frequency AV AV Peak Peak [MHz] [µV/m] [dBµV/m] [µV/m] [dBµV/m] above 1 GHz 500 54.0 5000 74.0 5.3.3. Test condition and measurement test set-up Signal ink to test system (if used):  air link  cable connection EUT-grounding  none  with power supply  additional connection Equipment set up  table top 1.5m height  floor standing Climatic conditions Temperature: (22±3°C) Rel. humidity: (40±20)% Spectrum- Scan frequency range:  1 – 18 GHz  18 – 25 GHz  18 – 40 GHz  other: Analyzer Scan-Mode  6 dB EMI-Receiver Mode  3 dB Spectrum analyser Mode settings Detector Peak and Average RBW/VBW 1 MHz / 3 MHz Mode: Repetitive-Scan, max-hold Scan step 400 kHz Sweep-Time Coupled – calibrated display if CW signal otherwise adapted to EUT’s individual duty-cycle General measurement procedures Please see chapter “Test system set-up for radiated electric field measurements above 1 GHz” 5.3.4. Measurement Results TX-Mode The results are presented below in summary form only. For more information please see diagrams in annex 4 . Dia- Carrier Channel Set- OP- Used detector Result Frequency gram up mode Remark range no. no. no. Range No. PK AV QP 4.01a 1 – 7 GHz a-Mode, 48Mbit 4.01b Low 149 7 - 18 GHz 1 1    passed 18 – 40 GHz Low Ch=149 4.01c 4.02a 1 –GHz 7 GHz AC20-Mode, MCS5 4.02b Middle 157 7 - 18 GHz 1 1    passed 18 - 40 GHz middle Ch=157 4.02c 4.03a 1 – 7 GHz n-Mode, 26MBit 4.03b High 165 7 - 18 GHz 1 1    passed high Ch =165 4.03c 18 - 40 GHz TR2_20823287p_13

Test Report 2-20823287p/13, Page 17 of 25 4.04a 1 – 7 GHz AC40-Mode MCS4 4.04b Low 151 7 - 18 GHz 1 1    passed LowCh=151 4.04c 18 - 40 GHz 4.05a 1 – 7 GHz AC40-Mode MCS6 4.05b High 159 7 - 18 GHz 1 1    passed High Ch=159 4.05c 18 - 40 GHz 4.06a 1 – 7 GHz AC80-Mode, MCS0 4.06b Middle 155 7 - 18 GHz 1 1    passed Ch=155 4.06c 18 - 40 GHz Remark:-- 5.3.5. Requirements/Limits RX-Mode  Part 15 Subpart B, §15.109 class B FCC  Part 15 subpart C, §15.209 @ frequencies defined in §15.205  C63.4-2009 ANSI  C63.10-2009 Limits, 3 meters Frequency AV AV Peak Peak [MHz] [µV/m] [dBµV/m] [µV/m] [dBµV/m] above 1 GHz 500 54.0 5000 74.0 5.3.6. Measurement Results RX-Mode The results are presented below in summary form only. For more information please see diagrams. Dia- Carrier Channel Set- OP- Used detector Result Frequency gram up mode Remark range no. no. no. Range No. PK AV QP 4.07 Middle 157 1 – 16 GHz 1 2 --    passed Remark: due uncritical results (noise level only), frequency range 18-30GHz not tested 5.3.7. VERDICT: PASS TR2_20823287p_13

Test Report 2-20823287p/13, Page 18 of 25 5.4. Radiated Band-Edge compliance, field strength measurements accord. §15.247 5.4.1. Test location and equipment FAR test site  441 EMI SAR  348 EMI cond.  443 EMI FAR  347 Radio.lab.  337 OATS  spectr. analys.  584 FSU  120 FSEM  264 FSEK  489 ESU 40   antenna meas  574 BTA-L  289 CBL 6141  608 HL 562  549 HL025  302 BBHA9170  477 GPS antenna meas  123 HUF-Z2  132 HUF-Z3  030 HFH-Z2    antenna subst  071 HUF-Z2  020 EMCO3115  063 LP 3146  303 BBHA9170   multimeter  341 Fluke 112      signaling  371 CBT32  298 CMU 200   DCpower  086 LNG50-10  087 EA3013  354 NGPE 40  349 car battery  350 Car battery  line voltage  230 V 50 Hz via public mains  060 120 V 60 Hz via PAS 5000 5.4.2. Requirements/Limits  Part 15 Subpart B, §15.109 class B FCC  Part 15 subpart C, §15.209  C63.4-2009 ANSI  C63.10-2009 Right Band-Edge Limits@3 meters Frequency AV AV Peak Peak [MHz] [µV/m] [dBµV/m] [µV/m] [dBµV/m] above 1 GHz 500 54.0 5000 74.0 5.4.3. MEASUREMENT METHOD FOR BAND-EDGE: For uncritical results where a measurement bandwidth of 1MHz can clearly show the compliance without influencing the results, a field strength measurement was performed only. For critical results a Marker-Delta marker method was used for showing compliance to restricted bands according §15.205. The method is according ANSI 63.10:2009 “Marker-Delta method”, §6.9.3. The method consists of three independent steps: 1. Step: Prior to the measurement the fundamental radiated In-Band field strength was performed. The determined value is used as reference value. 2. Step: Second step consist of finding the relative attenuation between the fundamental emission and the maximum local out-of-band emission (within 2 MHz range around the band edge either on the band-edge directly or some modulation product if the level is greater than that on the band-edge) when measured with lower resolution bandwidth. 3. Step: The delta value recorded in step 2 will be subtracted from value recorded in step 1, thus giving the required field strength at the band-edge. This value must fulfil the requirements for radiated spurious emissions in restricted bands in §15.205 with the general limits of §15.209. 5.4.4. RESULTS – LEFT BAND-EDGE Set-up: 1 Op. Mode: 1 Field strength Limit for field TNOM = 21°C, Diagram value at VNOM = 5V strength at the Remark Verdict no. Band-Edge band edge [dBµV/m] 9.01 52.0 (PK) -- pass Ch. 149 9.04 61.1 (PK) > 20dBc -- pass 9.06 59.96 (PK) -- pass TR2_20823287p_13

Test Report 2-20823287p/13, Page 19 of 25 5.4.5. RESULTS – RIGHT BAND-EDGE Set-up: 1 Op. Mode: 1 Field strength Limit for field TNOM = 21°C, Diagram value at Band- Measured VNOM = 5V strength at the Verdict no. Edge Values band edge [dBµV/m] 9.03 55.90 (PK) -- pass Ch. 165 9.05 54.6 (PK) > 20dBc -- pass 9.06 55.07 (PK) -- pass Remark: no frequency accord. §15.205 near-by -> 20dBc criteria 5.4.6. VERDICT: PASS TR2_20823287p_13

Test Report 2-20823287p/13, Page 20 of 25 5.5. Measurement uncertainties The reported uncertainties are calculated based on the standard uncertainty multiplied with the appropriate coverage factor k, such that a confidence level of approximately 95% is achieved. For uncertainty determination, each component used in the concrete measurement set-up was taken in account and it’s contribution to the overall uncertainty according it’s statistical distribution calculated. Following table shows expectable uncertainties for each measurement type performed. Calculated uncertainty based RF-Measurement Frequency range Remarks: on a confidence level of 95% Power Output conducted 9 kHz .. 20 GHz 1.0 dB -- Power Output radiated 30 MHz .. 4 GHz 3.17 dB Substitution method Conducted emissions on antenna ports 9 kHz .. 20 GHz 1.0 dB -- 150 kHz .. 30 MHz 5.0 dB Magnetic field Radiated emissions enclosure 30 MHz .. 1 GHz 4.2 dB E-Field 1 GHz .. 20 GHz 3.17 dB Substitution method 9 kHz .. 4 GHz 0.1272 ppm (Delta Marker ) Frequency error Occupied bandwidth 1.0 dB Power 9 kHz .. 4 GHz 0.1272 ppm (Delta Marker) Frequency error Emission bandwidth 1.0 dB Power Frequency stability 9 kHz .. 20 GHz 0.0636 ppm -- Conducted emissions 9 kHz .. 150 kHz 4.0 dB -- on AC-mains port (UCISPR) 150 kHz .. 30 MHz 3.6 dB Table: measurement uncertainties, valid for conducted/radiated measurements 6. Abbreviations used in this report The abbreviations ANSI American National Standards Institute AV , AVG, CAV Average detector EIRP Equivalent isotropically radiated power, determined within a separate measurement EGPRS Enhanced General Packet Radio Service EUT Equipment Under Test FCC Federal Communications Commission, USA IC Industry Canada n.a. not applicable Op-Mode Operating mode of the equipment PK Peak RBW resolution bandwidth RF Radio frequency RSS Radio Standards Specification, Dokuments from Industry Canada Rx Receiver TCH Traffic channel Tx Transmitter QP Quasi peak detector VBW Video bandwidth ERP Effective radiated power TR2_20823287p_13

Test Report 2-20823287p/13, Page 21 of 25 7. Accreditation details of CETECOM’s laboratories and test sites Ref.- Accreditation Valid for laboratory area or test site No. Certificate Accreditation Body - D-PL- DAkkS, Deutsche All laboratories and test sites of CETECOM GmbH, Essen 12047-01-01 Akkreditierungsstelle GmbH 337 Radiated Measurements 30 MHz to 1 GHz, 3 m / 10 m (OATS) FCC, Federal Communications 487 Radiated Measurements 30 MHz to 1 GHz, 3 m (SAR) Commission 558 736496 Radiated Measurements above 1 GHz, 3 m (FAR) Laboratory Division, USA 348 Mains Ports Conducted Interference Measurements (MRA US-EU 0003) 348 Telecommunication Ports Conducted Interference Measurem. 337 3462D-1 Radiated Measurements 30 MHz to 1 GHz, 3 m / 10 m (OATS) 487 3462D-2 Radiated Measurements 30 MHz to 1 GHz, 3 m (SAR) IC, Industry Canada Certification 550 3462D-2 Radiated Measurements 1 GHz to 6 GHz, 3 m (SAR) and Engineering Bureau 558 3462D-3 Radiated Measurements above 1 GHz, 3 m (FAR) 487 R-2666 Radiated Measurements 30 MHz to 1 GHz, 3 m (SAR) VCCI, Voluntary Control Council 550 G-301 Radiated Measurements 1 GHz to 6 GHz, 3 m (SAR) for Interference by Information 348 C-2914 Mains Ports Conducted Interference Measurements Technology Equipment, Japan 348 T-1967 Telecommunication Ports Conducted Interference Measurem. OATS = Open Area Test Site, SAR = Semi Anechoic Room, FAR = Fully Anechoic Room TR2_20823287p_13

Test Report 2-20823287p/13, Page 22 of 25 8. Instruments and Ancillary 20. Dez. 13 8.1. Used equiment “CTC” The “Ref.-No” in the left column of the following tables allows the clear identification of the laboratory equipment. 8.1.1. Test software and firmware of equipment Ref.-No. Equipment Type Serial-No. Version of Firmware or Software during the test 001 EMI Test Receiver ESS 825132/017 Firm.= 1.21 , OTP=2.0, GRA=2.0 012 Signal Generator (EMS-cond.) SMY 01 839069/027 Firm.= V 2.02 013 Power Meter (EMS cond.) NRVD 839111/003 Firm.= V 1.51 017 Digital Radiocommunication Tester CMD 60 M 844365/014 Firmware = V 3.52 .22.01.99, DECT = D2.87 13.01.99 053 Audio Analyzer UPA3 860612/022 Firm. V 4.3 119 RT Harmonics Analyzer dig. Flickermeter B10 G60547 Firm.= V 3.1DHG 140 Signal Generator SMHU 831314/006 Firm.= 3.21 261 Thermal Power Sensor NRV-Z55 825083/0008 EPROM-Datum 02.12.04, SE EE 1 B 262 Power Meter NRV-S 825770/0010 Firm.= 2.6 263 Signal Generator SMP 04 826190/0007 Firm.=3.21 264 Spectrum Analyzer FSEK 30 826939/005 Bios=2.1, Analyzer= 3.20 UNIT Firmware= 4.04, SW-Main=4.04, SW-BBP=1.04, 295 Racal Digital Radio Test Set 6103 1572 SW-DSP=1.02, Hardboot=1.02, Softboot=2.02 R&S Test Firmware =3.53 /3.54 (current Testsoftw. f. 298 Univ. Radio Communication Tester CMU 200 832221/091 all band used 323 Digital Radiocommunication Tester CMD 55 825878/0034 Firm.= 3.52 .22.01.99 331 Climatic Test Chamber -40/+80 Grad HC 4055 43146 TSI 1.53 335 CTC-EMS-Conducted System EMS Conducted - EMC 32 V 8.52 340 Digital Radiocommunication Tester CMD 55 849709/037 Firm.= 3.52 .22.01.99 355 Power Meter URV 5 891310/027 Firm.= 1.31 365 10V Insertion Unit 50 Ohm URV5-Z2 100880 Eprom Data = 31.03.08 366 Ultra Compact Simulator UCS 500 M4 V0531100594 Firm. UCS 500=001925/3.06a02, rc=ISMIEC 4.10 371 Bluetooth Tester CBT32 100153 CBT V5,30+ SW-Option K55, K57 377 EMI Test Receiver ESCS 30 100160 Firm.= 2.30, OTP= 02.01, GRA= 02.36 378 Broadband RF Field Monitor RadiSense III 03D00013SNO-08 Firm.= V.03D13 383 Signal Generator SME 03 842 828 /034 Firm.= 4.61 389 Digital Multimeter Keithley 2000 0583926 Firm. = A13 (Mainboard) A02 (Display) Firm.= 4.50 #005, IPL=4.01#001,OS=4.02#001, 392 Radio Communication Tester MT8820A 6K00000788 GSM=4.41#013, W-CDMA= 4.54#004, scenario= 4.52#002 R&S Test Firmware Base=5.14, Mess-Software= 436 Univ. Radio Communication Tester CMU 200 103083 GSM:5.14 WCDMA:5.14 (current Testsoftw. F. all band 441 CTC-SAR-EMI Cable Loss System EMI field (SAR) - EMC 32 Version 8.52 442 CTC-SAR-EMS System EMS field (SAR) - EMC 32 Version 8.40 System CTC-FAR-EMI- 443 CTC-FAR-EMI-RSE - Spuri 7.2.5 or EMC 32 Ver. 8.53 RSE 444 CTC-FAR-EMS field System-EMS-Field (FAR) - EMC 32 Version 8.40 R&S Test Firmware Base=5.14, GSM=5.14 460 Univ. Radio Communication Tester CMU 200 108901 WCDMA=5.14 (current Testsoftw.,f. all band to be used, 489 EMI Test Receiver ESU40 1000-30 Firmware=4.43 SP3, Bios=V5.1-16-3, Spec. =01.00 491 ESD Simulator dito ESD dito dito307022 V 2.30 524 Voltage Drop Simulator VDS 200 0196-16 Software Nr: 000037 Version V4.20a01 526 Burst Generator EFT 200 A 0496-06 Software Nr. 000034 Version V2.32 527 Micro Pulse Generator MPG 200 B 0496-05 Software-Nr. 000030 Version V2.43 528 Load Dump Simulator LD 200B 0496-06 Software-Nr. 000031 Version V2.35a01 R&S Test Firmware Base=5.14, GSM=5.14 546 Univ. Radio Communication Tester CMU 200 106436 WCDMA=5.14 (current Testsoftw.,f. all band to be used R&S Test Firmware Base=V5.1403 (current Testsoftw., 547 Univ. Radio Communication Tester CMU 200 835390/014 f. all band used, GSM = 5.14 WCDMA: = 5.14 584 Spectrum Analyzer FSU 8 100248 2.82_SP3 R&S Test Firmware Base=5.01, GSM=5.02 WCDMA= 597 Univ. Radio Communication Tester CMU 200 100347 not installed, Mainboard= µP1=V.850 598 Spectrum Analyzer FSEM 30 (Reserve) 831259/013 Firmware Bios 3.40 , Analyzer 3.40 Sp 2 620 EMI Test Receiver ESU 26 100362 4.43_SP3 642 Wideband Radio Communication Tester CMW 500 126089 Setup V03.26, Test programm component V03.02.20 TR2_20823287p_13

Test Report 2-20823287p/13, Page 23 of 25 8.1.2. Single instruments and test systems Ref.-No. calibration Interval of Remark Equipment Type Serial-No. Manufacturer Cal due 001 EMI Test Receiver ESS 825132/017 Rohde & Schwarz 12 M - 31.03.2014 005 AC - LISN (50 Ohm/50µH, test site 1) ESH2-Z5 861741/005 Rohde & Schwarz 24/12 M - 31.03.2014 007 Single-Line V-Network (50 Ohm/5µH) ESH3-Z6 892563/002 Rohde & Schwarz 24/12 M - 31.03.2014 009 Power Meter (EMS-radiated) NRV 863056/017 Rohde & Schwarz 24 M - 31.03.2015 016 Line Impedance Simulating Network Op. 24-D B6366 Spitzenberger+Spies 36 M - 31.03.2016 020 Horn Antenna 18 GHz (Subst 1) 3115 9107-3699 EMCO 36/12 M - 31.03.2014 021 Loop Antenna (H-Field) 6502 9206-2770 EMCO 36 M - 31.03.2015 030 Loop Antenna (H-field) HFH-Z2 879604/026 Rohde & Schwarz 36 M - 31.03.2015 033 RF-current probe (100kHz-30MHz) ESH2-Z1 879581/18 Rohde & Schwarz 24 M - 31.03.2015 057 relay-switch-unit (EMS system) RSU 494440/002 Rohde & Schwarz pre-m 1a 060 power amplifier (DC-2kHz) PAS 5000 B6363 Spitzenberger+Spies - 3 WRCT 1900/2200-5/40- 066 notch filter (WCDMA; FDD1) 5 Wainwright GmbH 12 M 1g 30.06.2014 10EEK 086 DC - power supply, 0 -10 A LNG 50-10 - Heinzinger Electronic pre-m 2 087 DC - power supply, 0 -5 A EA-3013 S - Elektro Automatik pre-m 2 090 Helmholtz coil: 2x10 coils in series - - RWTÜV - 4 091 USB-LWL-Converter OLS-1 007/2006 Ing. Büro Scheiba - 4 099 passive voltage probe ESH2-Z3 299.7810.52 Rohde & Schwarz 36 M - 31.03.2015 100 passive voltage probe Probe TK 9416 without Schwarzbeck 36 M - 31.03.2015 110 USB-LWL-Converter OLS-1 - Ing. Büro Scheiba - 4 119 RT Harmonics Analyzer dig. Flickermeter B10 G60547 BOCONSULT 36 M - 31.03.2016 134 horn antenna 18 GHz (Subst 2) 3115 9005-3414 EMCO pre-m - 31.03.2014 136 adjustable dipole antenna (Dipole 1) 3121C-DB4 9105-0697 EMCO 36 M - 31.03.2015 140 Signal Generator SMHU 831314/006 Rohde & Schwarz 24 M - 31.03.2014 248 attenuator SMA 6dB 2W - Radiall pre-m 2 249 attenuator SMA 10dB 10W - Radiall pre-m 2 252 attenuator N 6dB 12W - Radiall pre-m 2 256 attenuator SMA 3dB 2W - Radiall pre-m 2 257 hybrid 4031C 04491 Narda pre-m 2 260 hybrid coupler 4032C 11342 Narda pre-m 2 261 Thermal Power Sensor NRV-Z55 825083/0008 Rohde & Schwarz 24 M - 31.03.2014 262 Power Meter NRV-S 825770/0010 Rohde & Schwarz 24 M - 31.03.2014 263 Signal Generator SMP 04 826190/0007 Rohde & Schwarz 36 M - 31.03.2016 264 Spectrum Analyzer FSEK 30 826939/005 Rohde & Schwarz 12 M - 31.03.2014 265 peak power sensor NRV-Z33, Model 04 840414/009 Rohde & Schwarz 24 M - 31.03.2014 266 peak power sensor NRV-Z31, Model 04 843383/016 Rohde & Schwarz 24 M - 31.03.2014 267 notch filter GSM 850 WRCA 800/960-6EEK 9 Wainwright GmbH pre-m 2 270 termination 1418 N BB6935 Weinschel pre-m 2 271 termination 1418 N BE6384 Weinschel pre-m 2 272 attenuator (20 dB) 50 W Model 47 BF6239 Weinschel pre-m 2 273 attenuator (10 dB) 100 W Model 48 BF9229 Weinschel pre-m 2 274 attenuator (10 dB) 50 W Model 47 (10 dB) 50 W BG0321 Weinschel pre-m 2 275 DC-Block Model 7003 (N) C5129 Weinschel pre-m 2 276 DC-Block Model 7006 (SMA) C7061 Weinschel pre-m 2 279 power divider 1515 (SMA) LH855 Weinschel pre-m 2 287 pre-amplifier 25MHz - 4GHz AMF-2D-100M4G-35-10P 379418 Miteq 12 M 1c 30.06.2014 291 high pass filter GSM 850/900 WHJ 2200-4EE 14 Wainwright GmbH 12 M 1c 30.06.2014 298 Univ. Radio Communication Tester CMU 200 832221/091 Rohde & Schwarz pre-m 3 300 AC LISN (50 Ohm/50µH, 1-phase) ESH3-Z5 892 239/020 Rohde & Schwarz 24/12 M - 31.03.2014 301 attenuator (20 dB) 50W, 18GHz 47-20-33 AW0272 Lucas Weinschel pre-m 2 302 horn antenna 40 GHz (Meas 1) BBHA9170 155 Schwarzbeck 36 M - 31.03.2014 303 horn antenna 40 GHz (Subst 1) BBHA9170 156 Schwarzbeck 36 M - 31.03.2014 331 Climatic Test Chamber -40/+80 Grad HC 4055 43146 Heraeus Vötsch 24 M - 30.11.2014 341 Digital Multimeter Fluke 112 81650455 Fluke 24 M - 31.03.2014 342 Digital Multimeter Voltcraft M-4660A IB 255466 Voltcraft 24 M - 31.03.2015 347 laboratory site radio lab. - - - 5 348 laboratory site EMI conducted - - - 5 354 DC - Power Supply 40A NGPE 40/40 448 Rohde & Schwarz pre-m 2 355 Power Meter URV 5 891310/027 Rohde & Schwarz 24 M - 31.03.2014 356 power sensor NRV-Z1 882322/014 Rohde & Schwarz 24 M - 31.03.2015 357 power sensor NRV-Z1 861761/002 Rohde & Schwarz 24 M - 31.03.2015 371 Bluetooth Tester CBT32 100153 R&S 24 M - 31.03.2014 373 Single-Line V-Network (50 Ohm/5µH) ESH3-Z6 100535 Rohde & Schwarz 24/12 M - 31.03.2014 376 Horn Antenna 6 GHz BBHA9120 E BBHA 9120 E 179 Schwarzbeck 12 M - 31.03.2014 377 EMI Test Receiver ESCS 30 100160 Rohde & Schwarz 12 M - 31.03.2014 389 Digital Multimeter Keithley 2000 0583926 Keithley 24 M - 31.03.2015 392 Radio Communication Tester MT8820A 6K00000788 Anritsu 12 M - 31.03.2014 431 Model 7405 Near-Field Probe Set 9305-2457 EMCO - 4 436 Univ. Radio Communication Tester CMU 200 103083 Rohde & Schwarz 12 M - 31.03.2014 441 CTC-SAR-EMI Cable Loss System EMI field (SAR) - CETECOM 12 M 5 31.10.2014 TR2_20823287p_13

Test Report 2-20823287p/13, Page 24 of 25 Ref.-No. calibration Interval of Remark Equipment Type Serial-No. Manufacturer Cal due Cable System CTC-FAR-EMI- ETS-Lindgren / 443 CTC-FAR-EMI-RSE - 12 M 5 15.07.2014 RSE CETECOM WRCT 1850.0/2170.0- Wainwright Instruments 448 notch filter WCDMA_FDD II 5 12 M 1c 30.06.2014 5/40- GmbH WRCT 824.0/894.0-5/40- 449 notch filter WCDMA FDD V 1 Wainwright 12 M 1c 30.06.2014 8SSK 454 Oscilloscope HM 205-3 9210 P 29661 Hameg - 4 456 DC-Power supply 0-5 A EA 3013 S 207810 Elektro Automatik pre-m 2 459 DC -Power supply 0-5 A , 0-32 V EA-PS 2032-50 910722 Elektro Automatik pre-m 2 460 Univ. Radio Communication Tester CMU 200 108901 Rohde & Schwarz 12 M - 31.03.2014 463 Universal source HP3245A 2831A03472 Agilent - 4 466 Digital Multimeter Fluke 112 89210157 Fluke USA 24 M - 31.03.2014 467 Digital Multimeter Fluke 112 89680306 Fluke USA 24 M - 31.03.2014 468 Digital Multimeter Fluke 112 90090455 Fluke USA 24 M - 31.03.2014 477 ReRadiating GPS-System AS-47 - Automotive Cons. Fink - 3 480 power meter (Fula) NRVS 838392/031 Rohde & Schwarz 24 M - 31.03.2015 482 filter matrix Filter matrix SAR 1 - CETECOM (Brl) - 1d AMF-5D-02501800-25- 484 pre-amplifier 2,5 - 18 GHz 1244554 Miteq 12 M - 30.06.2014 10P System EMI field (SAR) ETS Lindgren / 487 System CTC NSA-Verification SAR-EMI - 24 M - 30.06.2015 NSA CETECOM 489 EMI Test Receiver ESU40 1000-30 Rohde & Schwarz 12 M - 31.03.2014 WRCG 1709/1786- 502 band reject filter SN 9 Wainwright pre-m 2 1699/1796- 503 band reject filter WRCG 824/849-814/859- SN 5 Wainwright pre-m 2 WRCA 800/960-02/40- 512 notch filter GSM 850 SN 24 Wainwrght 12 M 1c 30.06.2014 6EEK 517 relais switch matrix HF Relais Box Keithley SE 04 Keithley pre-m 2 523 Digital Multimeter L4411A MY46000154 Agilent 24 M - 31.03.2015 529 6 dB Broadband resistive power divider Model 1515 LH 855 Weinschel pre-m 2 530 10 dB Broadband resistive power divider R 416110000 LOT 9828 - pre-m 2 546 Univ. Radio Communication Tester CMU 200 106436 R&S 12 M - 31.03.2014 547 Univ. Radio Communication Tester CMU 200 835390/014 Rohde & Schwarz 12 M - 31.03.2014 548 Digital-Barometer GBP 2300 without Greisinger GmbH 36 M - 30.06.2015 549 Log.Per-Antenna HL025 1000060 Rohde & Schwarz 36/12 M - 31.03.2015 552 high pass filter 2,8-18GHz WHKX 2.8/18G-10SS 4 Wainwright 12 M 1c 30.06.2014 System CTC FAR S- 558 System CTC FAR S-VSWR - CTC 24 M - 31.07.2015 VSWR 574 Biconilog Hybrid Antenna BTA-L 980026L Frankonia 36/12 M - 31.03.2016 584 Spectrum Analyzer FSU 8 100248 Rohde & Schwarz 24 M - 31.03.2014 597 Univ. Radio Communication Tester CMU 200 100347 Rohde & Schwarz 12 M - 31.03.2014 598 Spectrum Analyzer FSEM 30 (Reserve) 831259/013 Rohde & Schwarz 24 M - 13.01.2015 600 power meter NRVD (Reserve) 834501/018 Rohde & Schwarz 24 M - 31.03.2015 601 medium-sensitivity diode sensor NRV-Z5 (Reserve) 8435323/003 Rohde & Schwarz 24 M - 31.03.2015 602 peak power sensor NRV-Z32 (Reserve) 835080 Rohde & Schwarz 24 M - 31.03.2015 608 UltraLog-Antenna HL 562 830547/009 Rohde & Schwarz 36/12 M - 31.03.2014 611 DC power supply E3632A KR 75305854 Agilent pre-m 2 612 DC power supply E3632A MY 40001321 Agilent pre-m 2 613 Attenuator R416120000 20dB 10W Lot. 9828 Radiall pre-m 2 616 Digitalmultimeter Fluke 177 88900339 Fluke 24 M - 31.03.2014 617 Power Splitter/Combiner ZFSC-2-2-S+ S F987001108 Mini Circuits - 2 618 Power Splitter/Combiner 50PD-634 600994 JFW Industries USA - 2 619 Power Splitter/Combiner 50PD-634 600995 JFW Industries, USA - 3 620 EMI Test Receiver ESU 26 100362 Rohde-Schwarz 12 M - 01.03.2014 621 Step Attenuator 0-139 dB RSP 100017 Rohde & Schwarz pre-m 2 625 Generic Test Load USB Generic Test Load USB - CETECOM - 2 201.0999.9302.6.4.1.4 627 data logger OPUS 1 G. Lufft GmbH 24 M - 30.05.2014 3 634 Spectrum Analyzer FSM (HF-Unit) 826188/010 Rohde & Schwarz pre-m 2 636 Thermal Imaging camera Ti32 Ti32-12060213 Fluke Corporation 24 M - 31.07.2014 HDMI cable with Ethernet 637 High Speed HDMI with Ethernet 1m - KogiLink - 2 1m 638 HDMI Kabel with Ethernet 1,5 m flach HDMI cable with Ethernet - Reichelt - 2 640 HDMI cable 2m rund HDMI cable 2m rund - Reichelt - 2 641 HDMI cable with Ethernet Certified HDMI cable with - PureLink - 2 642 Wideband Radio Communication Tester CMW 500 126089 Rohde&Schwarz 24 M - 31.03.2014 644 Amplifierer ZX60-2534M+ SN865701299 Mini-Circuits - - 670 Univ. Radio Communication Tester CMU 200 106833 Rohde & Schwarz 12 M - 31.03.2014 671 DC-power supply 0-5 A EA-3013S - Elektro Automatik pre-m 2 678 Power Meter NRP 101638 Rohde&Schwarz pre-m - 683 Spectrum Analyzer FSU 26 200571 Rohde & Schwarz 12 M - 26.11.2014 Narda Safety Test 686 Field Analyzer EHP-200A 160WX30702 24 M - 18.07.2015 Solutions 687 Signal Generator SMF 100A 102073 Rohde&Schwarz 12 M - 27.11.2014 688 Pre Amp JS-18004000-40-8P 1750117 Miteq pre-m - TR2_20823287p_13

Test Report 2-20823287p/13, Page 25 of 25 Ref.-No. calibration Interval of Remark Equipment Type Serial-No. Manufacturer Cal due Note / remarks Calibrated during system calibration: 1a System CTC-SAR-EMS (Ref.-No. 442) 1b System-CTC-EMS-Conducted (Ref.-No. 335) 1c System CTC-FAR-EMI-RSE (Ref.-No . 443) 1d System CTC-SAR-EMI (Ref.-No . 441) 1e System CTC-OATS (EMI radiated) (Ref.-No. 337) 1f System CTC-CTIA-OTA (Ref.-No . 420) 1g System CTC-FAR-EMS (Ref.-No . 444) 2 Calibration or equipment check immediately before measurement 3 Regulatory maintained equipment for functional check or support purpose 4 calibration of this equipment Ancillary equipment without has no effect calibration onmechanical e.g. measuring result equipment or monitoring equipment 5 Test System Interval of calibration 12 M 12 month 24 M 24 month 36 M 36 month 24/12 M Calibration every 24 months, between this every 12 months internal validation 36/12 M Calibration every 36 months, between this every 12 months internal validation Pre-m Check before starting the measurement - Without calibration TR2_20823287p_13


Document Created: 2019-11-20 07:21:19
Document Modified: 2019-11-20 07:21:19
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC