Label

FCC ID: PY7F3232021

ID Label/Location Info

Download: PDF
FCCID_910919

1 (5) Company Internal SPECIFICATION Prepared (also subject responsible if other) No. SEKI/BMD/TP Pam Wood 1204-9596 Approved Checked Date Rev Reference SEKI/BMD/TP (Pam Wood) 2008-1-02 2 Marking Drawing MD300 Type FAD-3232021- BV General information All bar codes, when applicable, are according to Ericsson corporate standard 102 01–109 Uen. All bar codes shall fulfill minimum print quality C according to ANSI X3.182-1990 as stated in Ericsson corporate standard 102 01–1003 Uen. No bar codes are allowed to be closer to a label edge than 3 mm (quiet zone!). Label The label shall be 39mm (L) x 23mm (H) Placing The label shall be placed on the back of the PC card according to MD300 PC Card Assy drawing number 12034-6121 . The Core Unit Product Labels should be marked as described below. Print layout (for illustration purposes only-not to scale)

2 (5) Company Internal SPECIFICATION Prepared (also subject responsible if other) No. SEKI/BMD/TP Pam Wood 1204-9596 Approved Checked Date Rev Reference SEKI/BMD/TP (Pam Wood) 2008-1-02 2 Line Definition Format Sony Ericsson and the Sony Ericsson trademark 1a Sony Ericsson trademark shall be according to the corporate standard 190 89-EN/LZT 108 5347. Height min. 2.0 mm. 1b Model Name “MD300” Text height min.1.5 mm. 2 Type number The type number is FAD-3232021-BV and shall be printed “TYPE FAD-3232021-BV”. 3a FCC approval marking FCC approval marking: consists of the text: FCC ID: PY7F3232021 3b Approval marks (1,2) 1. CE Marking. According to 1424 - SVF 930 52. 2. The Notified Body number. It shall be 0682. The print size (height) for the notified body number and the corresponding approval marks shall be minimum 5 mm. This is a regulatory requirement. 4a Industry Canada marking Industry Canada approval marking: consists of text: IC: 4170B-F3232021 4b Trash can logo 5a Serial number as characters According to Ericsson group standard 0012-101. Sony Ericsson group factory number system according to Sony Ericsson corporate standard 1120-101 Factory codes: Flextronics (Malaysia) = BD3 5b Actual Sales Item number including Revision state (e.g. 1204-8375.1) and shall be printed. Sales Item Number “SI XXXX–XXXX. R” 6a Serial number as bar code According to Ericsson corporate standard 102 01 - 109. Height 3.0 mm 6b Country approval mark 1 Left blank – space for country approval mark

3 (5) Company Internal SPECIFICATION Prepared (also subject responsible if other) No. SEKI/BMD/TP Pam Wood 1204-9596 Approved Checked Date Rev Reference SEKI/BMD/TP (Pam Wood) 2008-1-02 2 Line Definition Format 7a IMEI number as characters The IMEI number has format: TAC - SNR - CD TAC = First eight digits of the Type Approval code after assignment from the Notified Body: refer to table 1 below. SNR = A serial number from 000 000 to 999 999 according to factory allocation: refer to table 1 below. CD = A check digit, from 0-9, calculated according to the Luhn formula (ISO/IEC 7812), GSM 02.16. 7b Country approval mark 2 Left blank – space for country approval mark 8a IMEI number as bar code The bar code shall only contain the digits of the IMEI number (no -). Height 3.0 mm. 8b Repair year/week/revision re- For service use only. work code 9a Actual PC Card Assembly Number including PC Card Core Unit Number Revision state and shall be printed. “CU XXXX–XXXX. R” 9b Marking of origin shall be printed Marking of origin “Made in xxxxx” “xxxxx” = Actual country of production in English 9c Production week The production week shall be given as yyWww (yy = year, ww = week)

4 (5) Company Internal SPECIFICATION Prepared (also subject responsible if other) No. SEKI/BMD/TP Pam Wood 1204-9596 Approved Checked Date Rev Reference SEKI/BMD/TP (Pam Wood) 2008-1-02 2 Table 1 To be completed when production numbers available Core Unit IMEI TAC code IMEI SNR Allocated factory 1200-4721 XXXXXXXX FSA Printing regulations Font face: OCR-B Type size: min. 1.3 mm Line spacing: min. 0.3 mm Trade mark height: min. 3 mm Approval marks height: min. 5 mm Colour: Black Margins: 3.0mm clear margin on Left & Right edges 0.5mm clear margin on Top & Bottom edges Print layout for prototypes Line 3a is replaced with alternative text shown below. Type size min. 5 mm. PROTOTYPE EP1 PROTOTYPE EP2 PROTOTYPE FP1 etc Note: Refer to build Exemption and/or the Build Entry Request (BER) for the proper naming convention for the prototype Build. Line 3b is left blank. Line 4a is left blank Line 7a and 8a: IMEI-numbers as characters and IMEI-numbers as barcode shall be filled with the test IMEI number.

5 (5) Company Internal SPECIFICATION Prepared (also subject responsible if other) No. SEKI/BMD/TP Pam Wood 1204-9596 Approved Checked Date Rev Reference SEKI/BMD/TP (Pam Wood) 2008-1-02 2 The test IMEI number is in the following ranges: 00440107092400 to - 00440107094899 Line 10 is added with text ‘PROTOTYPE” "NOT TYPE APPROVED". Text height min. 2 mm.


Document Created: 2008-01-21 12:20:40
Document Modified: 2008-01-21 12:20:40
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC