Test Report_20160530_v1 - PY7-PM0952_TestRpt_FCC RFExp_Appendix A

FCC ID: PY7-PM0954

RF Exposure Info

Download: PDF
FCCID_3017081

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2016/2/28 System Check_Head_835MHz_160228 DUT: D835V2­499 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: HSL_850_160228 Medium parameters used: f = 835 MHz; σ = 0.891 S/m; εr = 41.616; ρ = 1000 kg/m3 A i T ：23.2 ℃; Li i T ：22.2 ℃ DASY5 Configuration ­ Probe: EX3DV4 ­ SN3955; ConvF(9.96, 9.96, 9.96); Calibrated: 2015/11/24; ­ Sensor­Surface: 1.4mm (Mechanical Surface Detection) ­ Electronics: DAE4 Sn1399; Calibrated: 2015/11/23 ­ Phantom: SAM_Right; Type: QD000P40CD; Serial: S/N:1801 ­ Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Configuration/Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 3.01 W/kg Configuration/Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 60.76 V/m; Power Drift = ­0.05 dB Peak SAR (extrapolated) = 3.35 W/kg SAR(1 g) = 2.25 W/kg; SAR(10 g) = 1.48 W/kg Maximum value of SAR (measured) = 2.96 W/kg 0 dB = 2.96 W/kg = 4.71 dBW/kg

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2016/2/16 System Check_Body_835MHz_160216 DUT: D835V2-499 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: MSL_850_160216 Medium parameters used: f = 835 MHz; σ = 0.972 mho/m; εr = 55.684; ρ = 1000 kg/m3 23.6 22.6 DASY5 Configuration: - Probe: EX3DV4 - SN3931; ConvF(10.13, 10.13, 10.13); Calibrated: 2015/10/1; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn577; Calibrated: 2015/9/24 - Phantom: SAM_Front; Type: SAM; Serial: TP-1303 - Measurement SW: DASY52, Version 52.8 (1);SEMCAD X Version 14.6.5 (6469) Configuration/Pin=250mW/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 3.21 mW/g Configuration/Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 59.660 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 3.636 mW/g SAR(1 g) = 2.41 mW/g; SAR(10 g) = 1.59 mW/g Maximum value of SAR (measured) = 3.21 mW/g 0 dB = 3.21 mW/g = 10.13 dB mW/g

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2016/2/27 System Check_Body_835MHz_160227 DUT: D835V2­499 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: MSL_850_160227 Medium parameters used: f = 835 MHz; σ = 0.97 S/m; εr = 55.669; ρ = 1000 kg/m3 A i T ：23.6 ℃; Li i T ：22.6 ℃ DASY5 Configuration ­ Probe: EX3DV4 ­ SN3955; ConvF(10.08, 10.08, 10.08); Calibrated: 2015/11/24; ­ Sensor­Surface: 1.4mm (Mechanical Surface Detection) ­ Electronics: DAE4 Sn1399; Calibrated: 2015/11/23 ­ Phantom: SAM_Left; Type: QD000P40CD; Serial: S/N:1796 ­ Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Configuration/Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 3.21 W/kg Configuration/Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 61.08 V/m; Power Drift = ­0.17 dB Peak SAR (extrapolated) = 3.41 W/kg SAR(1 g) = 2.28 W/kg; SAR(10 g) = 1.51 W/kg Maximum value of SAR (measured) = 3.01 W/kg 0 dB = 3.01 W/kg = 4.79 dBW/kg

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2016/3/1 System Check_Head_1900MHz_160301 DUT: D1900V2-5d041 Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: HSL_1900_160301 Medium parameters used: f = 1900 MHz; σ = 1.456 mho/m; εr = 41.146; ρ = 1000 kg/m3 23.2 22.2 DASY5 Configuration: - Probe: EX3DV4 - SN3925; ConvF(8.18, 8.18, 8.18); Calibrated: 2015/5/27; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn495; Calibrated: 2015/5/22 - Phantom: SAM_Left; Type: SAM; Serial: TP-1303 - Measurement SW: DASY52, Version 52.8 (1);SEMCAD X Version 14.6.5 (6469) Configuration/Pin=250mW/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 16.1 mW/g Configuration/Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 108.5 V/m; Power Drift = -0.09 dB Peak SAR (extrapolated) = 19.145 mW/g SAR(1 g) = 10.2 mW/g; SAR(10 g) = 5.28 mW/g Maximum value of SAR (measured) = 15.7 mW/g 0 dB = 15.7 mW/g = 23.92 dB mW/g

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2016/2/26 System Check_Body_1900MHz_160226 DUT: D1900V2­5d041 Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: MSL_1900_160226 Medium parameters used: f = 1900 MHz; σ = 1.531 S/m; εr = 54.209; ρ = 1000 kg/m3 A i T ：23.7 ℃; Li i T ：22.7 ℃ DASY5 Configuration ­ Probe: EX3DV4 ­ SN3955; ConvF(7.89, 7.89, 7.89); Calibrated: 2015/11/24; ­ Sensor­Surface: 1.4mm (Mechanical Surface Detection) ­ Electronics: DAE4 Sn1399; Calibrated: 2015/11/23 ­ Phantom: SAM_Left; Type: QD000P40CD; Serial: S/N:1796 ­ Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Configuration/Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 16.4 W/kg Configuration/Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 96.56 V/m; Power Drift = 0.18 dB Peak SAR (extrapolated) = 18.7 W/kg SAR(1 g) = 10.2 W/kg; SAR(10 g) = 5.25 W/kg Maximum value of SAR (measured) = 15.6 W/kg 0 dB = 15.6 W/kg = 11.93 dBW/kg

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2016/3/5 System Check_Head_2450MHz_160305 DUT: D2450V2­736 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: HSL_2450_160305 Medium parameters used: f = 2450 MHz; σ = 1.809 S/m; εr = 39.65; ρ = 1000 kg/m3 A i T ：23.8 ℃; Li i T ：22.8 ℃ DASY5 Configuration ­ Probe: EX3DV4 ­ SN3955; ConvF(7.36, 7.36, 7.36); Calibrated: 2015/11/24; ­ Sensor­Surface: 1.4mm (Mechanical Surface Detection) ­ Electronics: DAE4 Sn1399; Calibrated: 2015/11/23 ­ Phantom: SAM_Left; Type: QD000P40CD; Serial: S/N:1796 ­ Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Configuration/Pin=250mW/Area Scan (71x71x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 22.3 W/kg Configuration/Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 114.5 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 27.2 W/kg SAR(1 g) = 13.4 W/kg; SAR(10 g) = 6.26 W/kg Maximum value of SAR (measured) = 22.2 W/kg 0 dB = 22.2 W/kg = 13.46 dBW/kg

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2016/3/10 System Check_Head_2450MHz_160310 DUT: D2450V2­736 Communication System: CW ; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: HSL_2450_160310 Medium parameters used: f = 2450 MHz; σ = 1.807 S/m; εr = 40.194; ρ = 1000 kg/m3 A i T ：23.7 ℃; Li i T ：22.7 ℃ DASY5 Configuration ­ Probe: EX3DV4 ­ SN3925; ConvF(7.38, 7.38, 7.38); Calibrated: 2015/5/27; ­ Sensor­Surface: 1.4mm (Mechanical Surface Detection) ­ Electronics: DAE3 Sn495; Calibrated: 2015/5/22 ­ Phantom: SAM_Right; Type: QD000P40CD; Serial: S/N:1801 ­ Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Configuration/Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 19.7 W/kg Configuration/Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 105.9 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 26.4 W/kg SAR(1 g) = 12.9 W/kg; SAR(10 g) = 5.95 W/kg Maximum value of SAR (measured) = 19.7 W/kg 0 dB = 19.7 W/kg = 12.94 dBW/kg

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2016/3/6 System Check_Body_2450MHz_160306 DUT: D2450V2­736 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: MSL_2450_160306 Medium parameters used: f = 2450 MHz; σ = 1.979 S/m; εr = 53.435; ρ = 1000 kg/m3 A i T ：23.1 ℃; Li i T ：22.1 ℃ DASY5 Configuration ­ Probe: EX3DV4 ­ SN3955; ConvF(7.53, 7.53, 7.53); Calibrated: 2015/11/24; ­ Sensor­Surface: 1.4mm (Mechanical Surface Detection) ­ Electronics: DAE4 Sn1399; Calibrated: 2015/11/23 ­ Phantom: SAM_Right; Type: QD000P40CD; Serial: S/N:1801 ­ Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Configuration/Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 20.9 W/kg Configuration/Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 107.7 V/m; Power Drift = ­0.17 dB Peak SAR (extrapolated) = 25.1 W/kg SAR(1 g) = 12.4 W/kg; SAR(10 g) = 5.77 W/kg Maximum value of SAR (measured) = 20.5 W/kg 0 dB = 20.5 W/kg = 13.12 dBW/kg

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2016/3/12 System Check_Body_2450MHz_160312 DUT: D2450V2­736 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: MSL_2450_160312 Medium parameters used: f = 2450 MHz; σ = 2.035 S/m; εr = 54.789; ρ = 1000 kg/m3 A i T ：23.2 ℃; Li i T ：22.2 ℃ DASY5 Configuration ­ Probe: EX3DV4 ­ SN3955; ConvF(7.53, 7.53, 7.53); Calibrated: 2015/11/24; ­ Sensor­Surface: 1.4mm (Mechanical Surface Detection) ­ Electronics: DAE4 Sn1399; Calibrated: 2015/11/23 ­ Phantom: SAM_Left; Type: QD000P40CD; Serial: S/N:1796 ­ Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Configuration/Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 19.9 W/kg Configuration/Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 102.9 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 24.5 W/kg SAR(1 g) = 12.1 W/kg; SAR(10 g) = 5.62 W/kg Maximum value of SAR (measured) = 20.0 W/kg 0 dB = 20.0 W/kg = 13.01 dBW/kg

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2016/3/2 System Check_Head_2600MHz_160302 DUT: D2600V2-1008 Communication System: CW; Frequency: 2600 MHz;Duty Cycle: 1:1 Medium: HSL_2600_160302 Medium parameters used: f = 2600 MHz; σ = 1.982 mho/m; εr = 38.837; ρ = 1000 kg/m3 23.2 22.2 DASY5 Configuration: - Probe: EX3DV4 - SN3925; ConvF(7.17, 7.17, 7.17); Calibrated: 2015/5/27; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn495; Calibrated: 2015/5/22 - Phantom: SAM_Front; Type: SAM; Serial: TP-1303 - Measurement SW: DASY52, Version 52.8 (1);SEMCAD X Version 14.6.5 (6469) Configuration/Pin=250mW/Area Scan (61x61x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (interpolated) = 21.3 mW/g Configuration/Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 105.7 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 28.243 mW/g SAR(1 g) = 13.7 mW/g; SAR(10 g) = 6.12 mW/g Maximum value of SAR (measured) = 21.1 mW/g 0 dB = 21.1 mW/g = 26.49 dB mW/g

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2016/2/12 System Check_Body_2600MHz_160212 DUT: D2600V2-1008 Communication System: CW; Frequency: 2600 MHz;Duty Cycle: 1:1 Medium: MSL_2600_160212 Medium parameters used: f = 2600 MHz; σ = 2.248 S/m; εr = 52.013; ρ = 1000 kg/m3 23.1 22.1 DASY5 Configuration - Probe: EX3DV4 - SN3925; ConvF(7.33, 7.33, 7.33); Calibrated: 2015/5/27; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn495; Calibrated: 2015/5/22 - Phantom: SAM_RIGHT; Type: QD000P40CD; Serial: 1719 - Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Configuration/Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 25.4 W/kg Configuration/Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 110.3 V/m; Power Drift = -0.17 dB Peak SAR (extrapolated) = 32.2 W/kg SAR(1 g) = 14.5 W/kg; SAR(10 g) = 6.36 W/kg Maximum value of SAR (measured) = 25.4 W/kg 0 dB = 25.4 W/kg = 14.05 dBW/kg

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2016/2/15 System Check_Body_2600MHz_160215 DUT: D2600V2­1008 Communication System: CW; Frequency: 2600 MHz;Duty Cycle: 1:1 Medium: MSL_2600_160215 Medium parameters used: f = 2600 MHz; σ = 2.229 S/m; εr = 54.18; ρ = 1000 kg/m3 A i T ：23.3 ℃; Li i T ：22.3 ℃ DASY5 Configuration ­ Probe: ES3DV3 ­ SN3270; ConvF(4.27, 4.27, 4.27); Calibrated: 2015/9/28; ­ Sensor­Surface: 3mm (Mechanical Surface Detection) ­ Electronics: DAE4 Sn1490; Calibrated: 2015/9/14 ­ Phantom: SAM_Right; Type: QD000P40CD; Serial: S/N:1801 ­ Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Configuration/Pin=250mW/Area Scan (71x71x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 20.6 W/kg Configuration/Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 104.6 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 29.4 W/kg SAR(1 g) = 13.5 W/kg; SAR(10 g) = 6.06 W/kg Maximum value of SAR (measured) = 21.1 W/kg 0 dB = 21.1 W/kg = 13.24 dBW/kg

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2016/2/27 System Check_Body_2600MHz_160227 DUT: D2600V2­1008 Communication System: CW; Frequency: 2600 MHz;Duty Cycle: 1:1 Medium: MSL_2600_160227 Medium parameters used: f = 2600 MHz; σ = 2.217 S/m; εr = 53.444; ρ = 1000 kg/m3 A i T ：23.2 ℃; Li i T ：22.2 ℃ DASY5 Configuration ­ Probe: EX3DV4 ­ SN3955; ConvF(7.23, 7.23, 7.23); Calibrated: 2015/11/24; ­ Sensor­Surface: 1.4mm (Mechanical Surface Detection) ­ Electronics: DAE4 Sn1399; Calibrated: 2015/11/23 ­ Phantom: SAM_Right; Type: QD000P40CD; Serial: S/N:1801 ­ Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Configuration/Pin=250mW/Area Scan (71x71x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 23.9 W/kg Configuration/Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 106.7 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 30.2 W/kg SAR(1 g) = 13.7 W/kg; SAR(10 g) = 6.06 W/kg Maximum value of SAR (measured) = 23.8 W/kg 0 dB = 23.8 W/kg = 13.77 dBW/kg

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2016/3/1 System Check_Head_5250MHz_160301 DUT: D5GHzV2­1128 Communication System: CW; Frequency: 5250 MHz;Duty Cycle: 1:1 Medium: HSL_5G_160301 Medium parameters used: f = 5250 MHz; σ = 4.628 S/m; εr = 36.461; ρ = 1000 kg/m3 A i T ：23.3 ℃; Li i T ：22.3 ℃ DASY5 Configuration ­ Probe: EX3DV4 ­ SN3955; ConvF(5.08, 5.08, 5.08); Calibrated: 2015/11/24; ­ Sensor­Surface: 1.4mm (Mechanical Surface Detection) ­ Electronics: DAE4 Sn1399; Calibrated: 2015/11/23 ­ Phantom: SAM_Left; Type: QD000P40CD; Serial: S/N:1796 ­ Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Configuration/Pin=100mW/Area Scan (71x71x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 24.4 W/kg Configuration/Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 75.03 V/m; Power Drift = ­0.05 dB Peak SAR (extrapolated) = 36.8 W/kg SAR(1 g) = 8.63 W/kg; SAR(10 g) = 2.35 W/kg Maximum value of SAR (measured) = 21.5 W/kg 0 dB = 21.5 W/kg = 13.32 dBW/kg

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2016/3/2 System Check_Head_5250MHz_160302 DUT: D5GHzV2­1128 Communication System: CW; Frequency: 5250 MHz;Duty Cycle: 1:1 Medium: HSL_5G_160302 Medium parameters used: f = 5250 MHz; σ = 4.597 S/m; εr = 36.529; ρ = 1000 kg/m3 A i T ：23.3 ℃; Li i T ：22.3 ℃ DASY5 Configuration ­ Probe: EX3DV4 ­ SN3955; ConvF(5.08, 5.08, 5.08); Calibrated: 2015/11/24; ­ Sensor­Surface: 1.4mm (Mechanical Surface Detection) ­ Electronics: DAE4 Sn1399; Calibrated: 2015/11/23 ­ Phantom: SAM_Left; Type: QD000P40CD; Serial: S/N:1796 ­ Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Configuration/Pin=100mW/Area Scan (71x71x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 24.2 W/kg Configuration/Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 75.03 V/m; Power Drift = ­0.05 dB Peak SAR (extrapolated) = 36.5 W/kg SAR(1 g) = 8.58 W/kg; SAR(10 g) = 2.34 W/kg Maximum value of SAR (measured) = 21.3 W/kg 0 dB = 21.3 W/kg = 13.28 dBW/kg

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2016/3/3 System Check_Body_5250MHz_160303 DUT: D5GHzV2­1128 Communication System: CW; Frequency: 5250 MHz;Duty Cycle: 1:1 Medium: MSL_5G_160303 Medium parameters used: f = 5250 MHz; σ = 5.539 S/m; εr = 47.632; ρ = 1000 kg/m3 A i T ：23.7 ℃; Li i T ：22.7 ℃ DASY5 Configuration ­ Probe: EX3DV4 ­ SN3955; ConvF(4.42, 4.42, 4.42); Calibrated: 2015/11/24; ­ Sensor­Surface: 1.4mm (Mechanical Surface Detection) ­ Electronics: DAE4 Sn1399; Calibrated: 2015/11/23 ­ Phantom: SAM_Right; Type: QD000P40CD; Serial: S/N:1801 ­ Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Configuration/Pin=100mW/Area Scan (71x71x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 17.9 W/kg Configuration/Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 64.54 V/m; Power Drift = ­0.04 dB Peak SAR (extrapolated) = 28.2 W/kg SAR(1 g) = 7.21 W/kg; SAR(10 g) = 2 W/kg Maximum value of SAR (measured) = 17.6 W/kg 0 dB = 17.6 W/kg = 12.46 dBW/kg

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2016/3/4 System Check_Body_5250MHz_160304 DUT: D5GHzV2­1128 Communication System: CW; Frequency: 5250 MHz;Duty Cycle: 1:1 Medium: MSL_5G_160304 Medium parameters used: f = 5250 MHz; σ = 5.537 S/m; εr = 46.941; ρ = 1000 kg/m3 A i T ：23.8 ℃; Li i T ：22.8 ℃ DASY5 Configuration ­ Probe: EX3DV4 ­ SN3955; ConvF(4.42, 4.42, 4.42); Calibrated: 2015/11/24; ­ Sensor­Surface: 1.4mm (Mechanical Surface Detection) ­ Electronics: DAE4 Sn1399; Calibrated: 2015/11/23 ­ Phantom: SAM_Right; Type: QD000P40CD; Serial: S/N:1801 ­ Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Configuration/Pin=100mW/Area Scan (71x71x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 16.6 W/kg Configuration/Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 65.42 V/m; Power Drift = 0.10 dB Peak SAR (extrapolated) = 29.7 W/kg SAR(1 g) = 7.28 W/kg; SAR(10 g) = 2 W/kg Maximum value of SAR (measured) = 18.0 W/kg 0 dB = 18.0 W/kg = 12.55 dBW/kg

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2016/3/1 System Check_Head_5600MHz_160301 DUT: D5GHzV2­1128 Communication System: CW; Frequency: 5600 MHz;Duty Cycle: 1:1 Medium: HSL_5G_160301 Medium parameters used: f = 5600 MHz; σ = 4.975 S/m; εr = 35.956; ρ = 1000 kg/m3 A i T ：23.3 ℃; Li i T ：22.3 ℃ DASY5 Configuration ­ Probe: EX3DV4 ­ SN3955; ConvF(4.39, 4.39, 4.39); Calibrated: 2015/11/24; ­ Sensor­Surface: 1.4mm (Mechanical Surface Detection) ­ Electronics: DAE4 Sn1399; Calibrated: 2015/11/23 ­ Phantom: SAM_Left; Type: QD000P40CD; Serial: S/N:1796 ­ Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Configuration/Pin=100mW/Area Scan (71x71x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 18.9 W/kg Configuration/Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 71.47 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 31.2 W/kg SAR(1 g) = 7.77 W/kg; SAR(10 g) = 2.17 W/kg Maximum value of SAR (measured) = 19.3 W/kg 0 dB = 19.3 W/kg = 12.86 dBW/kg

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2016/3/2 System Check_Head_5600MHz_160302 DUT: D5GHzV2­1128 Communication System: CW; Frequency: 5600 MHz;Duty Cycle: 1:1 Medium: HSL_5G_160302 Medium parameters used: f = 5600 MHz; σ = 4.948 S/m; εr = 36.021; ρ = 1000 kg/m3 A i T ：23.3 ℃; Li i T ：22.3 ℃ DASY5 Configuration ­ Probe: EX3DV4 ­ SN3955; ConvF(4.39, 4.39, 4.39); Calibrated: 2015/11/24; ­ Sensor­Surface: 1.4mm (Mechanical Surface Detection) ­ Electronics: DAE4 Sn1399; Calibrated: 2015/11/23 ­ Phantom: SAM_Left; Type: QD000P40CD; Serial: S/N:1796 ­ Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Configuration/Pin=100mW/Area Scan (71x71x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 18.8 W/kg Configuration/Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 71.47 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 31.0 W/kg SAR(1 g) = 7.73 W/kg; SAR(10 g) = 2.16 W/kg Maximum value of SAR (measured) = 19.2 W/kg 0 dB = 19.2 W/kg = 12.83 dBW/kg

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2016/3/3 System Check_Body_5600MHz_160303 DUT: D5GHzV2­1128 Communication System: CW; Frequency: 5600 MHz;Duty Cycle: 1:1 Medium: MSL_5G_160303 Medium parameters used: f = 5600 MHz; σ = 6.008 S/m; εr = 47.03; ρ = 1000 kg/m3 A i T ：23.7 ℃; Li i T ：22.7 ℃ DASY5 Configuration ­ Probe: EX3DV4 ­ SN3955; ConvF(3.81, 3.81, 3.81); Calibrated: 2015/11/24; ­ Sensor­Surface: 1.4mm (Mechanical Surface Detection) ­ Electronics: DAE4 Sn1399; Calibrated: 2015/11/23 ­ Phantom: SAM_Right; Type: QD000P40CD; Serial: S/N:1801 ­ Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Configuration/Pin=100mW/Area Scan (71x71x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 20.5 W/kg Configuration/Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 68.25 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 33.2 W/kg SAR(1 g) = 7.86 W/kg; SAR(10 g) = 2.14 W/kg Maximum value of SAR (measured) = 20.0 W/kg 0 dB = 20.0 W/kg = 13.01 dBW/kg

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2016/3/4 System Check_Body_5600MHz_160304 DUT: D5GHzV2­1128 Communication System: CW; Frequency: 5600 MHz;Duty Cycle: 1:1 Medium: MSL_5G_160304 Medium parameters used: f = 5600 MHz; σ = 5.99 S/m; εr = 46.33; ρ = 1000 kg/m3 A i T ：23.8 ℃; Li i T ：22.8 ℃ DASY5 Configuration ­ Probe: EX3DV4 ­ SN3955; ConvF(3.81, 3.81, 3.81); Calibrated: 2015/11/24; ­ Sensor­Surface: 1.4mm (Mechanical Surface Detection) ­ Electronics: DAE4 Sn1399; Calibrated: 2015/11/23 ­ Phantom: SAM_Right; Type: QD000P40CD; Serial: S/N:1801 ­ Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Configuration/Pin=100mW/Area Scan (71x71x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 19.1 W/kg Configuration/Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 67.89 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 32.1 W/kg SAR(1 g) = 7.76 W/kg; SAR(10 g) = 2.13 W/kg Maximum value of SAR (measured) = 19.5 W/kg 0 dB = 19.5 W/kg = 12.90 dBW/kg

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2016/3/1 System Check_Head_5750MHz_160301 DUT: D5GHzV2­1128 Communication System: CW; Frequency: 5750 MHz;Duty Cycle: 1:1 Medium: HSL_5G_160301 Medium parameters used: f = 5750 MHz; σ = 5.127 S/m; εr = 35.757; ρ = 1000 kg/m3 A i T ：23.3 ℃; Li i T ：22.3 ℃ DASY5 Configuration ­ Probe: EX3DV4 ­ SN3955; ConvF(4.41, 4.41, 4.41); Calibrated: 2015/11/24; ­ Sensor­Surface: 1.4mm (Mechanical Surface Detection) ­ Electronics: DAE4 Sn1399; Calibrated: 2015/11/23 ­ Phantom: SAM_Left; Type: QD000P40CD; Serial: S/N:1796 ­ Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Configuration/Pin=100mW/Area Scan (71x71x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 19.3 W/kg Configuration/Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 71.65 V/m; Power Drift = ­0.02 dB Peak SAR (extrapolated) = 32.9 W/kg SAR(1 g) = 7.9 W/kg; SAR(10 g) = 2.21 W/kg Maximum value of SAR (measured) = 19.8 W/kg 0 dB = 19.8 W/kg = 12.97 dBW/kg

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2016/3/2 System Check_Head_5750MHz_160302 DUT: D5GHzV2­1128 Communication System: CW; Frequency: 5750 MHz;Duty Cycle: 1:1 Medium: HSL_5G_160302 Medium parameters used: f = 5750 MHz; σ = 5.104 S/m; εr = 35.819; ρ = 1000 kg/m3 A i T ：23.3 ℃; Li i T ：22.3 ℃ DASY5 Configuration ­ Probe: EX3DV4 ­ SN3955; ConvF(4.41, 4.41, 4.41); Calibrated: 2015/11/24; ­ Sensor­Surface: 1.4mm (Mechanical Surface Detection) ­ Electronics: DAE4 Sn1399; Calibrated: 2015/11/23 ­ Phantom: SAM_Left; Type: QD000P40CD; Serial: S/N:1796 ­ Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Configuration/Pin=100mW/Area Scan (71x71x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 19.2 W/kg Configuration/Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 71.65 V/m; Power Drift = ­0.02 dB Peak SAR (extrapolated) = 32.7 W/kg SAR(1 g) = 7.86 W/kg; SAR(10 g) = 2.2 W/kg Maximum value of SAR (measured) = 19.7 W/kg 0 dB = 19.7 W/kg = 12.94 dBW/kg

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2016/3/4 System Check_Body_5750MHz_160304 DUT: D5GHzV2­1128 Communication System: CW; Frequency: 5750 MHz;Duty Cycle: 1:1 Medium: MSL_5G_160304 Medium parameters used: f = 5750 MHz; σ = 6.19 S/m; εr = 46.08; ρ = 1000 kg/m3 A i T ：23.8 ℃; Li i T ：22.8 ℃ DASY5 Configuration ­ Probe: EX3DV4 ­ SN3955; ConvF(3.92, 3.92, 3.92); Calibrated: 2015/11/24; ­ Sensor­Surface: 1.4mm (Mechanical Surface Detection) ­ Electronics: DAE4 Sn1399; Calibrated: 2015/11/23 ­ Phantom: SAM_Right; Type: QD000P40CD; Serial: S/N:1801 ­ Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Configuration/Pin=100mW/Area Scan (71x71x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 16.7 W/kg Configuration/Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 63.01 V/m; Power Drift = 0.12 dB Peak SAR (extrapolated) = 30.2 W/kg SAR(1 g) = 7.07 W/kg; SAR(10 g) = 1.95 W/kg Maximum value of SAR (measured) = 18.1 W/kg 0 dB = 18.1 W/kg = 12.58 dBW/kg


Document Created: 2017-12-07 08:32:27
Document Modified: 2017-12-07 08:32:27
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC