PY7-70663E_User_Manual_SAR leaflet_US.pdf

FCC ID: PY7-70663E

Users Manual

Download: PDF
FCCID_3807639

the Specific Absorption Rate (SAR). Tests Radio Wave Exposure and for SAR are conducted using Specific Absorption Rate standardized methods with the phone (SAR) Information transmitting at its highest certified power level in all used frequency bands. Important Information United While there may be differences between States the SAR levels of various phone models, THIS PHONE MODEL HAS BEEN they are all designed to meet the CERTIFIED IN COMPLIANCE WITH THE relevant guidelines for exposure to radio GOVERNMENT'S REQUIREMENTS FOR waves. For more information on SAR, EXPOSURE TO RADIO WAVES. please refer to the important The SO-05K Series mobile phones have information chapter in the User Guide. been designed to comply with The highest SAR value as reported to the applicable safety requirements for authorities for this phone model when exposure to radio waves. Your wireless tested for use by the ear is 0.67 W/kg*, phone is a radio transmitter and receiver. when worn on the body is 0.63W/kg* It is designed to not exceed the limits* of and when WiFi hotspot mode is 0.95 W/ exposure to radio frequency (RF) energy kg. For body-worn operation, this phone set by governmental authorities. These has been tested and meets the FCC RF limits establish permitted levels of RF exposure guidelines. Please use an energy for the general population. The accessory designated for this product or guidelines are based on standards that an accessory which contains no metal were developed by international and which positions the handset a scientific organizations through periodic minimum of 15 mm from the body. and thorough evaluation of scientific For devices which include “WiFi studies. hotspot” functionality, SAR The standards include a safety margin measurements for the device operating designed to assure the safety of all in WiFi hotspot mode were taken using a individuals, regardless of age and health. separation distance of 10 mm. The radio wave exposure guidelines employ a unit of measurement known as

Use of third-party accessories may result http://www.emfexplained.info/. in different SAR levels than those * In the United States, the SAR limit for mobile reported. phones used by the public is 1.6 watts/ kilogram (W/kg) averaged over one gram of ** Before a phone model is available for tissue. The standard incorporates a margin of sale to the public in the US, it must be safety to give additional protection for the tested and certified by the Federal public and to account for any variations in Communications Commission (FCC) that measurements. ** This paragraph is only applicable to it does not exceed the limit established authorities and customers in the United by the government-adopted States. requirement for safe exposure*. The tests are performed in positions and locations (i.e., by the ear and worn on the body) as required by the FCC for each model. The FCC has granted an Equipment Authorization for this phone model with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. While there may be differences between the SAR levels of various phones, all mobile phones granted an FCC equipment authorization meet the government requirement for safe exposure. SAR information on this phone model is on file at the FCC and can be found under the Display Grant section of http:// transition.fcc.gov/oet/ea/fccid/ after searching on FCCID PY7-70663E. Additional information on SAR can be found on the Mobile Manufacturers Forum EMF website at

If this equipment does cause harmful FCC Statement for the USA interference to radio or television This device complies with Part 15 of the reception, which can be determined by FCC rules. Operation is subject to the turning the equipment off and on, the following two conditions: user is encouraged to try to correct the interference by one or more of the (1) This device may not cause harmful interference. following measures: ･ Reorient or relocate the receiving (2) This device must accept any interference received, including interference that may antenna. cause undesired operation. ･ Increase the separation between the Any change or modification not equipment and receiver. ･ Connect the equipment into an outlet expressly approved by Sony may void the user's authority to operate the on a circuit different from that to which equipment. the receiver is connected. ･ Consult the dealer or an experienced This equipment has been tested and found to comply with the limits for a radio/TV technician for help. Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

Declaration of Conformity for SO-05K Hereby, Sony Mobile declares that the radio equipment type PM-1131-BV is in compliance with Directive: 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.sonymobile.co.jp/product/ SAR/doc/ Manufacturer: Sony Mobile Communications Inc, 4-12-3 Higashi- Shinagawa, Shinagawa-ku, Tokyo, 140– 0002, Japan For EU product compliance: Sony Belgium, bijkantoor van Sony Europe Limited, Da Vincilaan 7-D1, 1935 Zaventem, Belgium


Document Created: 2019-04-30 11:13:45
Document Modified: 2019-04-30 11:13:45
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC