PY7-57442Y_TestRpt_DXX_20181220

FCC ID: PY7-57442Y

Test Report

Download: PDF
FCCID_4113115

FCC RADIO TEST REPORT Report No. : FR882920-01D FCC RADIO TEST REPORT FCC ID : PY7-57442Y Equipment : GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC Brand Name : Sony Applicant : Sony Mobile Communications Inc. 4-12-3 Higashi-Shinagawa, Shinagawa-ku, Tokyo, 140-0002, Japan Manufacturer : Sony Mobile Communications Inc. 4-12-3 Higashi-Shinagawa, Shinagawa-ku, Tokyo, 140-0002, Japan Standard : FCC Part 15 Subpart C §15.225 The product was received on Aug. 30, 2018 and testing was started from Sep. 14, 2018 and completed on Nov. 08, 2018. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any agency of government. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full. Approved by: Jones Tsai SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) TEL : 886-3-327-3456 Page Number : 1 of 21 FAX : 886-3-328-4978 Issued Date : Dec. 20, 2018 Report Template No.: BU5-FR15CNFC Version 2.1 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR882920-01D Table of Contents History of this test report .................................................................................................................................... 3 Summary of Test Result ...................................................................................................................................... 4 1. General Description ......................................................................................................................................... 5 1.1 Product Feature of Equipment Under Test ................................................................................................................. 5 1.2 Product Specification of Equipment Under Test ......................................................................................................... 5 1.3 Modification of EUT ...................................................................................................................................................... 5 1.4 Testing Location ........................................................................................................................................................... 6 1.5 Applicable Standards ................................................................................................................................................... 6 2. Test Configuration of Equipment Under Test ............................................................................................... 7 2.1 Descriptions of Test Mode ........................................................................................................................................... 7 2.2 Connection Diagram of Test System .......................................................................................................................... 8 2.3 Table for Supporting Units ........................................................................................................................................... 9 2.4 EUT Operation Test Setup .......................................................................................................................................... 9 3. Test Results .................................................................................................................................................... 10 3.1 AC Power Line Conducted Emissions Measurement ............................................................................................... 10 3.2 20dB and 99% OBW Spectrum Bandwidth Measurement ....................................................................................... 12 3.3 Frequency Stability Measurement ............................................................................................................................. 13 3.4 Field Strength of Fundamental Emissions and Mask Measurement ....................................................................... 14 3.5 Radiated Emissions Measurement............................................................................................................................ 16 3.6 Antenna Requirements .............................................................................................................................................. 19 4. List of Measuring Equipment ....................................................................................................................... 20 5. Uncertainty of Evaluation.............................................................................................................................. 21 Appendix A. Test Results of Conducted Emission Test Appendix B. Test Results of Conducted Test Items B1. Test Result of 20dB Spectrum Bandwidth B2. Test Result of Frequency Stability Appendix C. Test Results of Radiated Test Items C1. Test Result of Field Strength of Fundamental Emissions C1. Results of Radiated Emissions (9 kHz~30MHz) C3. Results of Radiated Emissions (30MHz~1GHz) TEL : 886-3-327-3456 Page Number : 2 of 21 FAX : 886-3-328-4978 Issued Date : Dec. 20, 2018 Report Template No.: BU5-FR15CNFC Version 2.1 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR882920-01D History of this test report Report No. Version Description Issued Date FR882920-01D 01 Initial issue of report Dec. 07, 2018 FR882920-01D 02 Revising test data. Dec. 20, 2018 TEL : 886-3-327-3456 Page Number : 3 of 21 FAX : 886-3-328-4978 Issued Date : Dec. 20, 2018 Report Template No.: BU5-FR15CNFC Version 2.1 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR882920-01D Summary of Test Result Report Ref Std. Result Test Items Remark Clause Clause (PASS/FAIL) Under limit 3.1 15.207 AC Power Line Conducted Emissions Pass 9.81 dB at 1.066MHz 15.215(c) 20dB Spectrum Bandwidth Pass - 3.2 2.1049 99% OBW Spectrum Bandwidth Reporting only - 3.3 15.225(e) Frequency Stability Pass - Max level Field Strength of Fundamental 3.4 15.225(a)(b)(c) Pass 62.15 dBμV/m at Emissions 13.560 MHz Under limit 15.225(d) 3.5 Radiated Spurious Emissions Pass 3.29 dB at 15.209 40.680MHz 3.6 15.203 Antenna Requirements Pass - Reviewed by: Wii Chang Report Producer: Natasha Hsieh TEL : 886-3-327-3456 Page Number : 4 of 21 FAX : 886-3-328-4978 Issued Date : Dec. 20, 2018 Report Template No.: BU5-FR15CNFC Version 2.1 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR882920-01D 1. General Description 1.1 Product Feature of Equipment Under Test GSM/WCDMA/LTE, Bluetooth, DTS/UNII a/b/g/n/ac, FM Receiver, NFC, and GNSS. Product Specification subjective to this standard Antenna Type Single Loop Antenna EUT Information List Performed HW Version SW Version S/N Test Item CQ30015X26 RF conducted measurement A 1.129 CQ3001BNCD Radiated Spurious Emission CQ30015X2P Conducted Emission Accessory List Model No. : UCH32 S/N: AC Adapter 6218W30200215 (for radiated emission) 6218W30200140 (for conducted emission) Model No. : MH410c Earphone S/N: N/A Model No. : UCB24 USB Cable S/N : N/A Note: 1. Above EUT list used are electrically identical per declared by manufacturer. 2. Above the accessories list are used to exercise the EUT during test, and the serial number of each type of accessories is listed in each section of this report. 3. For other wireless features of this EUT, test report will be issued separately. 1.2 Product Specification of Equipment Under Test Standards-related Product Specification Tx/Rx Frequency 13.56MHz Channel Number 1 Type of Modulation ASK Remark: The above EUT's information was declared by manufacturer. 1.3 Modification of EUT No modifications are made to the EUT during all test items. TEL : 886-3-327-3456 Page Number : 5 of 21 FAX : 886-3-328-4978 Issued Date : Dec. 20, 2018 Report Template No.: BU5-FR15CNFC Version 2.1 Report Version : 02

seomncas. _FCC RADIO TEST REPORT Report No. : FR882920—01D 1.4 Testing Location Sporton Lab is accredited to ISO 17025 by Taiwan Accreditation Foundation (TAF code : 1190) and the FCC designation No. TW1190 and TWO007 under the FCC 2.948(e) by Mutual Recognition Agreement (MRA) in FCC Test. Test Site SPORTON INTERNATIONAL INC. No.52, Huaya 1st Rd., Guishan Dist., Tacyuan City, Taiwan (R.0.C.) Test Site Location TEL: +886—3—327—3456 FAX: +886—3—828—4978 Sporton Site No. Test Site No. THO3—HY COO5—HY Test Engineer George Chen Jimmy Chang Temperature 22~24"0 22~23°C Relative Humidity 58~55% 48~50% Note: The test site complies with ANSI C63.4 2014 requirement. Test Site SPORTON INTERNATIONAL INC. No.58, Aly. 75, Ln. 564, Wenhua 3rd, Rd., Guishan Dist., Tacyuan City, Taiwan (R.0.C.) Test Site Location TEL: +886—3—327—0868 FAX: +886—3—827—0855 Sporton Site No. Test Site No. O3CH11—HY Test Engineer HAQ HSU Temperature 21~25°C Relative Humidity 52~57% Note: The test site complies with ANSI C63.4 2014 requirement. 1.5 Applicable Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards: + FCC Part 15 Subpart C §15.225 + FCC KDB 414788 DO1 Radiated Test Site vO1r01 + ANSI C63.10—2013 TEL : 886—3—327—3456 Page Number : 6 of 21 FAX : 886—3—328—4978 Issued Date : Dec. 20, 2018 Report Template No.: BUS—FR15CNFC Version 2.1 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR882920-01D 2. Test Configuration of Equipment Under Test 2.1 Descriptions of Test Mode Investigation has been done on all the possible configurations. The following table is a list of the test modes shown in this test report. Test Items AC Power Line Conducted Emissions Field Strength of Fundamental Emissions 20dB Spectrum Bandwidth Frequency Stability Radiated Emissions 9kHz~30MHz Radiated Emissions 30MHz~1GHz The EUT pre-scanned in four NFC type, A, B, F, V. The worst type (type F) was recorded in this report. Pre-scanned tests, X, Y, Z in three orthogonal panels to determine the final configuration (Y plane as worst plane) from all possible combinations. Test Cases AC Mode 1 : Bluetooth Link + WLAN (2.4GHz) Link + NFC Link + Earphone + Battery + Conducted USB Cable (Charging from Adapter) Emission TEL : 886-3-327-3456 Page Number : 7 of 21 FAX : 886-3-328-4978 Issued Date : Dec. 20, 2018 Report Template No.: BU5-FR15CNFC Version 2.1 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR882920-01D 2.2 Connection Diagram of Test System <AC Conducted Emissions> <For Radiated Emissions Measurement> TEL : 886-3-327-3456 Page Number : 8 of 21 FAX : 886-3-328-4978 Issued Date : Dec. 20, 2018 Report Template No.: BU5-FR15CNFC Version 2.1 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR882920-01D 2.3 Table for Supporting Units Item Equipment Trade Name Model Name FCC ID Data Cable Power Cord 1. System Simulator R&S CMU 200 N/A N/A Unshielded, 1.8m 2. Bluetooth Earphone Sony SBH20 PY7-RD0010 N/A N/A 3. WLAN AP ASUS RT-AC66U MSQ-RTAC66U N/A Unshielded, 1.8m AC I/P: FCC DoC/ Unshielded, 1.2m 4. Notebook DELL P20G Contains FCC ID: N/A DC O/P: QDS-BRCM1054 Shielded, 1.8m 5. NFC Card N/A N/A N/A N/A N/A 6. SD Card SanDisk MicroSD HC FCC DoC N/A N/A 2.4 EUT Operation Test Setup The EUT was programmed to be in continuously transmitting mode. The ancillary equipment, NFC card, is used to make the EUT (NFC) continuously transmit at 13.56MHz and is placed around 2.5 cm gap to the EUT. TEL : 886-3-327-3456 Page Number : 9 of 21 FAX : 886-3-328-4978 Issued Date : Dec. 20, 2018 Report Template No.: BU5-FR15CNFC Version 2.1 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR882920-01D 3. Test Results 3.1 AC Power Line Conducted Emissions Measurement 3.1.1 Limit of AC Conducted Emission For equipment that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies within the band 150 kHz to 30 MHz shall not exceed the limits in the following table. Frequency of Emission Conducted Limit (dBμV) (MHz) Quasi-Peak Average 0.15-0.5 66 to 56* 56 to 46* 0.5-5 56 46 5-30 60 50 *Decreases with the logarithm of the frequency. 3.1.2 Measuring Instruments See list of measuring equipment of this test report. 3.1.3 Test Procedures 1. The EUT was placed 0.4 meter from the conducting wall of the shielding room, and it was kept at least 80 centimeters from any other grounded conducting surface. 2. Connect EUT to the power mains through a line impedance stabilization network (LISN). 3. All the support units are connecting to the other LISN. 4. The LISN provides 50 ohm coupling impedance for the measuring instrument. 5. The FCC states that a 50 ohm, 50 microhenry LISN should be used. 6. Both sides of AC line were checked for maximum conducted interference. 7. The frequency range from 150 kHz to 30 MHz was searched. 8. Set the test-receiver system to Peak Detect Function and specified bandwidth (IF Bandwidth = 9kHz) with Maximum Hold Mode. Then measurement is also conducted by Average Detector and Quasi-Peak Detector Function respectively. TEL : 886-3-327-3456 Page Number : 10 of 21 FAX : 886-3-328-4978 Issued Date : Dec. 20, 2018 Report Template No.: BU5-FR15CNFC Version 2.1 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR882920-01D 3.1.4 Test setup 3.1.5 Test Result of AC Conducted Emission Please refer to Appendix A. TEL : 886-3-327-3456 Page Number : 11 of 21 FAX : 886-3-328-4978 Issued Date : Dec. 20, 2018 Report Template No.: BU5-FR15CNFC Version 2.1 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR882920-01D 3.2 20dB and 99% OBW Spectrum Bandwidth Measurement 3.2.1 Limit Intentional radiators must be designed to ensure that the 20dB and 99% emission bandwidth in the specific band 13.553~13.567MHz. 3.2.2 Measuring Instruments See list of measuring instruments of this test report. 3.2.3 Test Procedures 1. The spectrum analyzer connected via a receive antenna placed near the EUT in peak Max hold mode. 2. The resolution bandwidth of 1 kHz and the video bandwidth of 3 kHz were used. 3. Measured the spectrum width with power higher than 20dB below carrier. 4. Measured the 99% OBW. 3.2.4 Test Setup 3.2.5 Test Result of Conducted Test Items Please refer to Appendix B. TEL : 886-3-327-3456 Page Number : 12 of 21 FAX : 886-3-328-4978 Issued Date : Dec. 20, 2018 Report Template No.: BU5-FR15CNFC Version 2.1 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR882920-01D 3.3 Frequency Stability Measurement 3.3.1 Limit The frequency tolerance of the carrier signal shall be maintained within +/- 0.01% (100ppm) of the operating frequency over a temperature variation of -20 degrees to +50 degrees C at normal supply voltage, and for a variation in the primary supply voltage from 85% to 115% of the rated supply voltage at a temperature of 20 degrees C. For battery operated equipment, the equipment tests shall be performed using a new battery. 3.3.2 Measuring Instruments See list of measuring instruments of this test report. 3.3.3 Test Procedures 1. The spectrum analyzer connected via a receive antenna placed near the EUT. 2. EUT have transmitted signal and fixed channelize. 3. Set the spectrum analyzer span to view the entire emissions bandwidth. 4. Set RBW = 1 kHz, VBW = 3 kHz with peak detector and maxhold settings. 5. The fc is declaring of channel frequency. Then the frequency error formula is (fc-f)/fc × 106 ppm and the limit is less than ±100ppm. 6. Extreme temperature rule is -20°C~50°C. 3.3.4 Test Setup 3.3.5 Test Result of Conducted Test Items Please refer to Appendix B. TEL : 886-3-327-3456 Page Number : 13 of 21 FAX : 886-3-328-4978 Issued Date : Dec. 20, 2018 Report Template No.: BU5-FR15CNFC Version 2.1 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR882920-01D 3.4 Field Strength of Fundamental Emissions and Mask Measurement 3.4.1 Limit Rules and specifications FCC CFR 47 Part 15 section 15.225 Description Compliance with the spectrum mask is tested with RBW set to 9kHz. Field Strength Field Strength Field Strength Field Strength Freq. of Emission (MHz) (μV/m) at 30m (dBμV/m) at 30m (dBμV/m) at 10m (dBμV/m) at 3m 1.705~13.110 30 29.5 48.58 69.5 13.110~13.410 106 40.5 59.58 80.5 13.410~13.553 334 50.5 69.58 90.5 13.553~13.567 15848 84.0 103.08 124.0 13.567~13.710 334 50.5 69.58 90.5 13.710~14.010 106 40.5 59.58 80.5 14.010~30.000 30 29.5 48.58 69.5 3.4.2 Measuring Instruments See list of measuring instruments of this test report. TEL : 886-3-327-3456 Page Number : 14 of 21 FAX : 886-3-328-4978 Issued Date : Dec. 20, 2018 Report Template No.: BU5-FR15CNFC Version 2.1 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR882920-01D 3.4.3 Test Procedures 1. Configure the EUT according to ANSI C63.10. The EUT was placed on the top of the turntable 0.8 meter above ground. The phase center of the loop receiving antenna mounted antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine the position of the highest radiation. 3. The height of the receiving antenna was fixed at one meter above ground to find the maximum emissions field strength. 4. For Fundamental emissions, use the receiver to measure QP reading. 5. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. 6. Compliance with the spectrum mask is tested with RBW set to 9kHz. Note: Emission level (dBμV/m) = 20 log Emission level (μV/m). 3.4.4 Test Setup For radiated emissions below 30MHz 3.4.5 Test Result of Field Strength of Fundamental Emissions and Mask Please refer to Appendix C. TEL : 886-3-327-3456 Page Number : 15 of 21 FAX : 886-3-328-4978 Issued Date : Dec. 20, 2018 Report Template No.: BU5-FR15CNFC Version 2.1 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR882920-01D 3.5 Radiated Emissions Measurement 3.5.1 Limit The field strength of any emissions which appear outside of 13.110 ~14.010MHz band shall not exceed the general radiated emissions limits. Frequencies Field Strength Measurement Distance (MHz) (μV/m) (meters) 0.009~0.490 2400/F(kHz) 300 0.490~1.705 24000/F(kHz) 30 1.705~30.0 30 30 30~88 100 3 88~216 150 3 216~960 200 3 Above 960 500 3 3.5.2 Measuring Instruments See list of measuring instruments of this test report. 3.5.3 Measuring Instrument Setting The following table is the setting of receiver: Receiver Parameter Setting Attenuation Auto Frequency Range: 9kHz~150kHz RBW 200Hz for QP Frequency Range: 150kHz~30MHz RBW 9kHz for QP Frequency Range: 30MHz~1000MHz RBW 120kHz for Peak Note: The emission limits shown in the above table are based on measurements employing a CISPR quasi-peak detector except for the frequency bands 9-90 kHz and 110-490 kHz. Radiated emission limits in these two bands are based on measurements employing an average detector. TEL : 886-3-327-3456 Page Number : 16 of 21 FAX : 886-3-328-4978 Issued Date : Dec. 20, 2018 Report Template No.: BU5-FR15CNFC Version 2.1 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR882920-01D 3.5.4 Test Procedures 1. Configure the EUT according to ANSI C63.10. The EUT was placed on the top of the turntable 0.8 meter above ground. The phase center of the receiving antenna mounted on the top of a height-variable antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine the position of the highest radiation. 3. The height of the broadband receiving antenna was varied between one meter and four meters above ground to find the maximum emissions field strength of both horizontal and vertical polarization. 4. For each suspected emissions, the antenna tower was scan (from 1 M to 4 M) and then the turntable was rotated (from 0 degree to 360 degrees) to find the maximum reading. 5. Set the test-receiver system to Peak or CISPR quasi-peak Detect Function with specified bandwidth under Maximum Hold Mode. 6. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. 7. In case the emission is lower than 30MHz, loop antenna has to be used for measurement and the recorded data should be QP measured by receiver. TEL : 886-3-327-3456 Page Number : 17 of 21 FAX : 886-3-328-4978 Issued Date : Dec. 20, 2018 Report Template No.: BU5-FR15CNFC Version 2.1 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR882920-01D 3.5.5 Test Setup For radiated emissions below 30MHz For radiated emissions above 30MHz 3.5.6 Test Result of Radiated Emissions Measurement Please refer to Appendix C. Remark: There is a comparison data of both open-field test site and alternative test site - semi-Anechoic chamber according to 414788 D01 Radiated Test Site v01r01, and the result came out very similar. TEL : 886-3-327-3456 Page Number : 18 of 21 FAX : 886-3-328-4978 Issued Date : Dec. 20, 2018 Report Template No.: BU5-FR15CNFC Version 2.1 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR882920-01D 3.6 Antenna Requirements 3.6.1 Standard Applicable Except for special regulations, the Low-power Radio-frequency Devices must not be equipped with any jacket for installing an antenna with extension cable. An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this Section. The manufacturer may design the unit so that the user can replace a broken antenna, but the use of a standard antenna jack or electrical connector is prohibited. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the rule. 3.6.2 Antenna Anti-Replacement Construction An embedded-in antenna design is used. TEL : 886-3-327-3456 Page Number : 19 of 21 FAX : 886-3-328-4978 Issued Date : Dec. 20, 2018 Report Template No.: BU5-FR15CNFC Version 2.1 Report Version : 02

seonton cas. FCC RADIO TEST REPORT Report No. : FR882920—01D 4. List of Measuring Equipment . 20. Calibration Instrument Manufacturer| Model No. Serial No. |Characteristics Date Test Date Due Date Remark ACSource Power ho powER AFG—500W F104070011 50Hz~60Hz Mar. 21, 2018 Sep. 20, 2018 mar. 20, 2019 Conducted (THO3—HY) Spectrum Rohde & Conducted Analyzer Schwarz FSP30 101329 9KHz~30GHz Jun. 25, 2018 Sep. 20, 2018 Jun. 24, 2019 (THo&—HY) Temperature ie sz0 Conducted Chamber ESPEC SU—641 92013721 30°C ~70C Dec. 06, 2017 Sep. 20, 2018 Dec. 05, 2019 (THOB—HY) AC Power . Conduction Source ChainTek APC—1000W N/A N/A N/A Sep. 14, 2018 N/A (COOS—HY) EMI Test Rohde & Conduction Receiver Schwarz ESA3 102388 9KHz~3.6GHz Dec. 08, 2017 Sep. 14, 2018 Dec. 07, 2018 (COO5—HY) Conduction Hygrometer Testo 608—H1 34913912 N/A Mar. 06, 2018 Sep. 14, 2018 Mar. 05, 2019 (COOS—HY) Rohde & Conduction LISN Schwarz ENV216 100080 9KHz~30MHz Nov. 30, 2017 Sep. 14, 2018 Nov. 29, 2018 (Coos—Hy) Rohde & EMC32 Conduction Software Schwarz v10.30 N/A N/A N/A Sep. 14, 2018 N/A (COOS—HY) HUBER + Conduction LF Cable SUHNER RG—214/U LFO1 N/A Jan. 03, 2018 Sep. 14, 2018 Jan. 02, 2019 (COO5—HY) m Rohde & Conduction Pulse Limiter Schwarz ESH3—Z2 100851 N/A Jan. 03, 2018 Sep. 14, 2018 Jan. 02, 2019 (COO5—HY) ; CBL 35414&AT—NO Radiation Bilog Antenna TESEQ B111D&N—6—06 602 30MHz~1GHz Oct. 13, 2018 Nov. 08, 2018 Oct. 12, 2019 (O3CHT1—HY) Loop Antenna ROMde & HFH2—z2 100488 9 kHz~30 MHz Nov. 23, 2017 Nov. 08, 2018 Nov. 22, 2018 (O3CH11—HY) Radiation ° Schwarz DT °* flms EMI Test . Radiation Receiver Keysight N3O38A(MXE) MY55420170 N/A Mar. 06, 2018 Nov. 08, 2018 Mar. 05, 2019 (O3CH11—HY) Spectrum . L Radiation Analyzer Keysight N3O10A MY54200486| 10Hz 44GHz Oct. 19, 2018 Nov. 08, 2018 Oct. 18, 2019 (O3CH11—HY) Amplifier P SONOMA s10N 187312 9kHz~1GHz Jan. tC 16, 2018 Nov.50C 08, 2018 Jan. tC 15, 2019 Radiation (OBCH11—HY) . m WHK20/1000 . Radiation Filter Wainwright craoss SN2 20M High Pass Sep. 17, 2018 Nov. 08, 2018 Sep. 16, 2019 (O3CH11—HY) HUBER + SUCOFLEX Radiation RF Cable SUHNER 104 MY9837/4PE 9K—30M Mar. 14, 2018 Nov. 08, 2018 Mar. 13, 2019 (O3CHT1—HY) HUBER + SUCOFLEX Radiation RF Cable SUHNER 104 MY9837/4 30M—18G Mar. 14, 2018 Nov. 08, 2018 Mar. 13, 2019 (O3CH11—HY) HUBER + SUCOFLEX Radiation RF Cable SUHNER 102 MY2589/2 30M—40G Mar. 14, 2018 Nov. 08, 2018 Mar. 13, 2019 (O3CHT1—HY) AM—BS—4500— Radiation Antenna Mast EMEC s N/A 1~4m N/A Nov. 08, 2018 N/A (O3CH11—HY) Control Turn Radiation Controller EMEC EM 1000 N/A table & Ant Mast N/A Nov. 08, 2018 N/A (O3CHT1—HY) Radiation Turn Table EMEC TT 2000 N/A 0~360 Degree N/A Nov. 08, 2018 N/A (O3CH11—HY) Hygrometer Y3 TECPEL DTN—303B TP140325 N/A Nov.O 05, 2018 Nov.O 08, 2018 Nov.O 04, 2049 Radiation (OBCH11—HY) : E3 Radiation Software Audix 6.2009—8—24 RK—001042 N/A N/A Nov. 08, 2018 N/A (O3CH11—HY) TEL : 886—3—327—3456 Page Number : 20 of 21 FAX : 886—3—328—4978 Issued Date : Dec. 20, 2018 Report Template No.: BUS—FR15CNFC Version 2.1 Report Version : 02

FCC RADIO TEST REPORT Report No. : FR882920-01D 5. Uncertainty of Evaluation Uncertainty of Conducted Emission Measurement (150 kHz ~ 30 MHz) Measuring Uncertainty for a Level of Confidence 2.20 of 95% (U = 2Uc(y)) Uncertainty of Radiated Emission Measurement (9 kHz ~ 30 MHz) Measuring Uncertainty for a Level of Confidence 3.45 of 95% (U = 2Uc(y)) Uncertainty of Radiated Emission Measurement (30 MHz ~ 1000 MHz) Measuring Uncertainty for a Level of Confidence 5.20 of 95% (U = 2Uc(y)) TEL : 886-3-327-3456 Page Number : 21 of 21 FAX : 886-3-328-4978 Issued Date : Dec. 20, 2018 Report Template No.: BU5-FR15CNFC Version 2.1 Report Version : 02

seomncas. _FCC RADIO TEST REPORT Report No. : FR882920—01D Appendix A. Test Results of Conducted Emission Test Temperature : 22~23C Test Engineer : |Jimmy Chang Relative Humidity : |48—50% TEL : 886—3—327—3456 Page Number : A1 of Ad FAX : 886—3—328—4978

EUT Information Report NO : 882920-01 Test Mode : Mode 1 Test Voltage : 120Vac/60Hz Phase : Line F u ll S p e c tru m 100 90 80 70 C IS P R -Q P L im it a t M a in P o rts Level in dBuV 60 C IS P R -A v e L im it a t M a in P o rts 50 40 30 20 10 0 150k 3 0 0 4 0 05 0 0 8 0 01 M 2M 3M 4M 5M 6 8 10M 20M 30M F re q u e n c y in H z Final_Result Frequency QuasiPeak CAverage Limit Margin Line Filter Corr. (MHz) (dBuV) (dBuV) (dBuV) (dB) (dB) 0.152250 --- 28.28 55.88 27.60 L1 OFF 19.5 0.152250 43.72 --- 65.88 22.16 L1 OFF 19.5 0.449250 --- 31.11 46.89 15.78 L1 OFF 19.5 0.449250 42.86 --- 56.89 14.03 L1 OFF 19.5 0.638250 --- 29.00 46.00 17.00 L1 OFF 19.6 0.638250 40.02 --- 56.00 15.98 L1 OFF 19.6 0.732750 --- 22.33 46.00 23.67 L1 OFF 19.6 0.732750 23.39 --- 56.00 32.61 L1 OFF 19.6 1.065750 --- 36.19 46.00 9.81 L1 OFF 19.6 1.065750 40.41 --- 56.00 15.59 L1 OFF 19.6 3.009750 --- 25.52 46.00 20.48 L1 OFF 19.6 3.009750 33.34 --- 56.00 22.66 L1 OFF 19.6 5.336250 --- 25.80 50.00 24.20 L1 OFF 19.7 5.336250 30.55 --- 60.00 29.45 L1 OFF 19.7 13.560000 --- 34.86 50.00 15.14 L1 OFF 20.0 13.560000 45.73 --- 60.00 14.27 L1 OFF 20.0

EUT Information Report NO : 882920-01 Test Mode : Mode 1 Test Voltage : 120Vac/60Hz Phase : Neutral F u ll S p e c tru m 100 90 80 70 C IS P R -Q P L im it a t M a in P o rts Level in dBuV 60 C IS P R -A v e L im it a t M a in P o rts 50 40 30 20 10 0 150k 3 0 0 4 0 05 0 0 8 0 01 M 2M 3M 4M 5M 6 8 10M 20M 30M F re q u e n c y in H z Final_Result Frequency QuasiPeak CAverage Limit Margin Line Filter Corr. (MHz) (dBuV) (dBuV) (dBuV) (dB) (dB) 0.152250 --- 29.64 55.88 26.24 N OFF 19.5 0.152250 49.01 --- 65.88 16.87 N OFF 19.5 0.282750 --- 22.96 50.74 27.78 N OFF 19.5 0.282750 24.48 --- 60.74 36.26 N OFF 19.5 0.467250 --- 32.55 46.56 14.01 N OFF 19.5 0.467250 41.86 --- 56.56 14.70 N OFF 19.5 0.566250 --- 26.97 46.00 19.03 N OFF 19.5 0.566250 37.92 --- 56.00 18.08 N OFF 19.5 0.638250 --- 27.01 46.00 18.99 N OFF 19.6 0.638250 37.63 --- 56.00 18.37 N OFF 19.6 0.933000 --- 22.40 46.00 23.60 N OFF 19.6 0.933000 23.67 --- 56.00 32.33 N OFF 19.6 4.506000 --- 25.51 46.00 20.49 N OFF 19.7 4.506000 29.00 --- 56.00 27.00 N OFF 19.7 13.560000 --- 34.94 50.00 15.06 N OFF 20.1 13.560000 44.31 --- 60.00 15.69 N OFF 20.1

FCC RADIO TEST REPORT Report No. : FR882920-01D Appendix B. Test Results of Conducted Test Items B1. Test Result of 20dB Spectrum Bandwidth Test mode NFC Tx Test Frequency (MHz) 13.56 * RBW 1 kHz Marker 1 [T1 ] * RBW 1 kHz Marker 1 [T1 ] * VBW 3 kHz 3.88 dBm * VBW 3 kHz 3.88 dBm Ref 10 dBm * Att 30 dB SWT 20 ms 13.560020000 MHz Ref 10 dBm * Att 30 dB SWT 20 ms 13.560020000 MHz 10 1 ndB [T1] 20.00 dB 10 1 OBW 2.240000000 kHz BW 2.640000000 kHz Temp 1 [T1 OBW] Temp 1 [T1 ndB] A -10.75 dBm A 0 0 -16.15 dBm 13.558860000 MHz 1 PK * 1 PK * 13.558660000 MHz T1 T2 Temp 2 [T1 OBW] VIEW VIEW -10 Temp 2 [T1 ndB] -10 -10.37 dBm T1 T2 -16.07 dBm 13.561100000 MHz 13.561300000 MHz -20 -20 -30 -30 -40 -40 3DB 3DB -50 -50 -60 -60 -70 -70 -80 -80 -90 -90 Center 13.56 MHz 1 kHz/ Span 10 kHz Center 13.56 MHz 1 kHz/ Span 10 kHz Date: 20.SEP.2018 09:15:11 Date: 20.SEP.2018 09:14:07 20dB Bandwidth (kHz) 2.640 99% OccupiedBW(kHz) 2.240 fL＞13.559 13.55866 Test Result Frequency range (MHz) fH＜13.561 13.56130 Complies Remark: Because the measured signal is CW adjusting the RBW per C63.10 would not be practical since measured bandwidth will always follow the RBW and the result will be approximately twice the RBW. TEL : 886-3-327-3456 Page Number : B1 of B3 FAX : 886-3-328-4978

seomncas. _FCC RADIO TEST REPORT Report No. : FR882920—01D B2. Test Result of Frequency Stability B3. Voltage vs. Frequency Stability Temperature vs. Frequency Stability Voltage (Vac) Measurement Temperature (°‘C) Time Measurement Frequency (MHz) Frequency (MHz) 120 13.559980 —20 0 13.559980 102 13.559980 2 13.560000 138 13.559980 5 13.560010 10 13.560040 —10 0 13.560080 2 13.560080 5 13.560080 10 13.560080 0 13.560080 13.560090 5 13.560080 10 13.559645 10 0 13.560080 2 13.560080 5 13.560080 10 13.560080 20 13.559980 13.559980 5 13.559980 10 13.559980 30 13.560020 13.560020 5 13.560010 10 13.560010 40 13.559980 13.559980 5 13.559980 10 13.559980 TEL : 886—3—327—3456 Page Number : B2 of B3 FAX : 886—3—328—4978

seomoncas. _FCC RADIO TEST REPORT Report No. : FR882920—01D Voltage vs. Frequency Stability Temperature vs. Frequency Stability Voltage (Vac) Measurement Temperature (°‘C) Time Measurement Frequency (MHz) Frequency (MHz) 50 0 13.559970 2 13.559980 5 13.559980 10 13.559980 Max.Deviation (MHz) —0.000020 Max.Deviation (MHz) —0.000355 Max.Deviation (ppm) —1.4749 Max.Deviation (ppm) —26.1799 Limit FS < £100 ppm Limit FS < £100 ppm Test Result PASS Test Result PASS TEL : 886—3—327—3456 Page Number : B3 of B3 FAX : 886—3—328—4978

FCC RADIO TEST REPORT Report No. : FR882920-01D Appendix C. Test Results of Radiated Test Items C1. Test Result of Field Strength of Fundamental Emissions Test Mode : NFC Tx Test Frequency (MHz) 13.56 Distance Frequency Level Over Limit Read Antenna Cable Ant Table Remark extrapolation Factor Limit Line Level Factor Loss Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( cm ) ( deg ) 13.351 39.77 40 -40.73 40.5 18.63 21 0.14 100 182 QP 13.56 62.15 40 -61.85 84 40.99 21.02 0.14 100 182 QP 13.771 41.63 40 -38.87 40.5 20.44 21.04 0.15 100 182 QP TEL : 886-3-327-3456 Page Number : C1 of C6 FAX : 886-3-328-4978

FCC RADIO TEST REPORT Report No. : FR882920-01D Test Mode : NFC Tx Test Frequency (MHz) 13.56 Distance Frequency Level Over Limit Read Antenna Cable Ant Table Remark extrapolation Factor Limit Line Level Factor Loss Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( cm ) ( deg ) 13.348 40.7 40 -39.8 40.5 19.56 21 0.14 100 276 QP 13.56 60.84 40 -63.16 84 39.68 21.02 0.14 100 276 QP 13.772 38.58 40 -41.92 40.5 17.39 21.04 0.15 100 276 QP TEL : 886-3-327-3456 Page Number : C2 of C6 FAX : 886-3-328-4978

FCC RADIO TEST REPORT Report No. : FR882920-01D C2. Results of Radiated Spurious Emissions (9 kHz~30MHz) Test Mode : NFC Tx Polarization : Horizontal Distance Frequency Level Over Limit Read Antenna Cable Ant Table Remark extrapolation Factor Limit Line Level Factor Loss Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( cm ) ( deg ) 0.0192 43.88 80 -78.06 41.94 24.17 19.7 0.01 Average 0.06735 53.47 80 -57.57 31.04 33.66 19.8 0.01 Average 0.0938 40.06 80 -68.1 28.16 20.45 19.6 0.01 QP 0.11004 37.86 80 -68.91 26.77 18.25 19.6 0.01 Average 0.15714 49.88 80 -53.8 23.68 30.33 19.53 0.02 Average 1.556 41.72 40 -22.04 23.76 22.37 19.29 0.06 100 0 QP 8.024 39.6 40 -29.9 29.5 19.05 20.43 0.12 QP 20.482 37.58 40 -31.92 29.5 15.8 21.61 0.17 QP 28.255 37.89 40 -31.61 29.5 15.92 21.77 0.2 QP TEL : 886-3-327-3456 Page Number : C3 of C6 FAX : 886-3-328-4978

FCC RADIO TEST REPORT Report No. : FR882920-01D Test Mode : NFC Tx Polarization : Vertical Distance Frequency Level Over Limit Read Antenna Cable Ant Table Remark extrapolation Factor Limit Line Level Factor Loss Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( cm ) ( deg ) 0.01915 40.64 80 -81.32 41.96 20.93 19.7 0.01 Average 0.06738 53.4 80 -57.63 31.03 33.59 19.8 0.01 Average 0.09378 39.75 80 -68.41 28.16 20.14 19.6 0.01 QP 0.11 38.46 80 -68.32 26.78 18.85 19.6 0.01 Average 0.1551 45.25 80 -58.54 23.79 25.7 19.53 0.02 Average 1.526 47.02 40 -16.91 23.93 27.66 19.3 0.06 100 0 QP 14.16 35.82 40 -33.68 29.5 14.6 21.07 0.15 QP 17.152 36.25 40 -33.25 29.5 14.75 21.34 0.16 QP 28.305 36.46 40 -33.04 29.5 14.49 21.77 0.2 QP Note: 1. The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. 2. Distance extrapolation factor = 40 log (specific distance / test distance) (dB). TEL : 886-3-327-3456 Page Number : C4 of C6 FAX : 886-3-328-4978

FCC RADIO TEST REPORT Report No. : FR882920-01D C3. Results of Radiated Spurious Emissions (30MHz~1GHz) Test Mode : NFC Tx Polarization : Horizontal Frequency Level Over Limit Read Antenna Cable Preamp Ant Table Remark Limit Line Level Factor Loss Factor Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( dB ) ( cm ) ( deg ) 40.68 22.08 -17.92 40 34.79 18.7 0.87 32.49 - - Peak 94.92 21.77 -21.73 43.5 37.77 15.12 1.31 32.48 - - Peak 149.07 30.09 -13.41 43.5 43.82 16.92 1.61 32.44 - - Peak 533.8 31.6 -14.4 46 36.83 23.84 2.95 32.41 - - Peak 753.6 30.69 -15.31 46 30.99 27.85 3.52 32.31 - - Peak 931.4 33.32 -12.68 46 30.36 29.54 3.92 31.37 100 0 Peak TEL : 886-3-327-3456 Page Number : C5 of C6 FAX : 886-3-328-4978

FCC RADIO TEST REPORT Report No. : FR882920-01D Test Mode : NFC Tx Polarization : Vertical Frequency Level Over Limit Read Antenna Cable Preamp Ant Table Remark Limit Line Level Factor Loss Factor Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( dB ) ( cm ) ( deg ) 40.68 36.71 -3.29 40 49.42 18.7 0.87 32.49 100 0 Peak 42.42 33.66 -6.34 40 47.22 17.84 0.89 32.49 - - Peak 94.92 23.99 -19.51 43.5 39.99 15.12 1.31 32.48 - - Peak 480.6 24.67 -21.33 46 30.5 23.5 2.77 32.37 - - Peak 533.8 35.2 -10.8 46 40.43 23.84 2.95 32.41 - - Peak 883.1 32.86 -13.14 46 30.64 29.11 3.83 31.75 - - Peak 40.68 36.71 -3.29 40 49.42 18.7 0.87 32.49 100 0 Peak Note: 1. The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. 2. Emission level (dBμV/m) = 20 log Emission level (μV/m). 3. Corrected Reading: Antenna Factor + Cable Loss + Read Level - Preamp Factor= Level. ─────THE END───── TEL : 886-3-327-3456 Page Number : C6 of C6 FAX : 886-3-328-4978


Document Created: 2018-12-20 11:58:36
Document Modified: 2018-12-20 11:58:36
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC