12371499-S2V1 Appendix E

FCC ID: PY7-54264J

Test Report

Download: PDF
FCCID_3958742

Calibration Laboratory of N7 NR\ 7 g Schweizerischer Kalibrierdienst + Schmid & Partner S ~ ilae\\:—;u%fi m Service suisse d‘étalonnage Engineering AG oooase g Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland +; ///\\\ s Swiss Calibration Service # Alulals® * Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client UL CCS USA Certificate No: EF3—4041_Mar18 IACALIBRATIC!%VE CERTIFICATE ommeemest Object EF3DV3 — SN:4041 Calibration procedure(s) QA CAL—02.v8, QA CAL—25.v6 Calibration procedure for E—field probes optimized for close near field evaluations in air Calibration date: March 16, 2018 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70% . Calibration Equipment used (M&TE critical for calibration) Primary Standards ID Cal Date (Certificate No.) Scheduled Calibration Power meter NRP SN: 104778 04—Apr—17 (No. 217—02521/02522) Apr—18 Power sensor NRP—Z291 SN: 103244 04—Apr—17 (No. 217—02521) Apr—18 Power sensor NRP—Z91 SN: 103245 04—Apr—17 (No. 217—02525) Apr—18 Reference 20 dB Attenuator SN: S5277 (20x%) 07—Apr—17 (No. 217—02528) Apr—18 Reference Probe ER3DV6 SN: 2328 10—Oct—17 (No. ER3—2328_Oct17) Oct—18 DAE4 SN: 789 2—Aug—17 (No. DAE4—789_Aug17) Aug—18 Secondary Standards ID Check Date (in house) Scheduled Check Power meter E4419B SN: GB41293874 06—Apr—16 (in house check Jun—16) In house check: Jun—18 Power sensor E4412A SN: MY41498087 06—Apr—16 (in house check Jun—16) In house check: Jun—18 Power sensor E4412A SN: 000110210 06—Apr—16 (in house check Jun—16) in house check: Jun—18 RF generator HP 8648C SN: US3642U01700 04—Aug—99 (in house check Jun—16) _In house check: Jun—18 Network Analyzer HP 8753E SN: US37390585 18—Oct—01 (in house check Oct—17) In house check: Oct—18 [\ 1 Name Function Signét Calibrated by: Claudio Leubler Laboratory Technician Approved by: Katja Pokovic Technical Manager /ME S Issued: March 17, 2018 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: EF3—4041_Mar18 Page 1 of 12

Calibration L Laboratory of S Schweizerischer Kalibrierdienst Schmid & Partner _ Service suisse d‘étalonnage Engineering AG 3 Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Catibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: NORMx,y,z sensitivity in free space DCP diode compression point CF crest factor (1/duty_cycle) of the RF signal A, B, C, D modulation dependent linearization parameters Polarization o @ rotation around probe axis Polarization 8 8 rotation around an axis that is in the plane normal to probe axis (at measurement center), ie., 8 = 0 is normal to probe axis Connector Angle information used in DASY system to align probe sensor X to the robot coordinate system Calibration is Performed According to the Following Standards: a) IEEE Std 1309—2005, " IEEE Standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz", December 2005 b) CTIA Test Plan for Hearing Aid Compatibility, Rev 3.0, November 2013 Methods Applied and Interpretation of Parameters: e NORMx,y,z: Assessed for E—field polarization 8 = 0 for XY sensors and 8 = 90 for Z sensor (f < 900 MHz in TEM—cell; f > 1800 MHz: R22 waveguide). e NORM(Px,y,z = NORMx,y,z * frequency_response (see Frequency Response Chart). e DCPx,y,z: DCP are numerical linearization parameters assessed based on the data of power sweep with CW signal (no uncertainty required). DCP does not depend on frequency nor media. «_ PAR: PAR is the Peak to Average Ratio that is not calibrated but determined based on the signal characteristics e Ax,y,z; Bx,y,z; Cx,y,z2; Dx,y,z; VRx,y,z; A, B, C, D are numerical linearization parameters assessed based on the data of power sweep for specific modulation signal. The parameters do not depend on frequency nor media. VR is the maximum calibration range expressed in RMS voltage across the diode. e Spherical isotropy (3D deviation from isotropy): in a locally homogeneous field realized using an open waveguide setup. *« Sensor Offset: The sensor offset corresponds to the offset of virtual measurement center from the probe tip (on probe axis). No tolerance required. «* Connector Angle: The angle is assessed using the information gained by determining the NORMx (no uncertainty required). Certificate No: EF3—4041_Mar18 Page 2 of 12

EF3DV3 — SN:4041 March 16, 2018 Probe EF3DV3 SN:4041 Manufactured: March 7, 2014 Repaired: March 15, 2018 Calibrated: March 16, 2018 Calibrated for DASY/EASY Systems {Note: non—compatible with DASY2 system!) Certificate No: EF3—4041 Mar18 Page 3 of 12

EF3DV3 — SN:4041 March 16, 2018 DASY/EASY — Parameters of Probe: EF3DV3 — SN:4041 Basic Calibration Parameters Sensor X Sensor Y Sensor Z Unc (k=2) Norm (uV/(V/m)?) 0.86 0.79 1.07 +101 % DCP (my)" 95.9 93.7 93.9 Modulation Calibration Parameters UID Communication System Name A B C D _VR Unc® dB dBVuV _ dB mV (k=2) 0 CW X 0.0 _ 0.0 1.0 0.00 139.6 £3.8 % Y 0.0 0.0 1.0 173.1 Z 0.0 0.0 1.0 ‘| dene 10021— GSM—FDD (TDMA, GMSK) X 1.72 65.5 11.9 9.39 141.5 £1.7 % DAC Y 1.65 66.1 11.9 130.1 Z 1.40 65.2 11.8 119.1 100023- GPRS—FDD (TDMA, GMSK, TN 0) X 177 66.0 12.3 9.57 137.3 +£1.9% DA Y 1.61 65.6 12.0 125.6 1 Z 1.34 63.8 115 115.0 10054- GPRS—FDD (TDMA, GMSK, TN 0—1) X 114 62.2 8.6 6.56 137.4 £1.7 % DA M 1.04 62.8 9.0 126.0 Z 0.93 62.3 9.3 147.0 — 10027— GPRS—FDD (TDMA, GMSK, TN 0—1—2) X 0.79 61.0 7.3 4.80 123.8 £1.4 % DAC Y 1.03 65.7 10.1 149.4 Z. 0.67 60.1 7.0 138.4 10028— GPRS—FDD (TDMA, GMSK, TN 0—1—2—3) X 0.66 60.6 6.3 3.55 139.0 £1.4 % DAC Y 0.46 57.8 4.3 128.2 Z 0.48 60.3 7.2 118.1 10030— IEEE 802.15.1 Bluetooth (GFSK, DH1) xX 1211 63.0 7.9 5.30 118.2 +0.7 % CAA f M 0.90 61.4 7.0 144.1 Z 0.78 60.2 6.4 133.0 10061— IEEE 802.11b WiFi 2.4 GHz (DSSS, 11 xX 3.03 70.9 20.8 3.60 128.2 +0.7 % CAB Mbps) Y 2.77 69.0 20.0 119.1 Z 3.29 72.5 21.7 148.0 10069— [EEE 802.11a/h WiFi 5 GHz (OFDM, 54 xX 10.69 70.0 24.3 10.56 129.4 £2.2 % CAC Mbps) Y 10.68 69.4 24.0 121.0 Z 10.45 68.8 23.6 | 109.9 10077— 1EEE 802.11g WiFi 2.4 GHz xX 10.24 71.4 26.0 11.00 149.4 £3.3 % CAB (DSSS/OFDM, 54 Mbps) Y 10.10 704 25.4 139.4 Z 9.90 69.7 24.9 126.7 Certificate No: EF3—4041_Mar18 Page 4 of 12

EF3DV3 — SN:4041 March 16, 2018 10173— LTE—TDD (SC—FDMA, 1 RB, 20 MHz, x 611 73.0 261 948 1308 +22% CAD 16—QAM) y 5.91 71.5 25.3 121.7 Z 5.91 71.7 25.4 146.5 10235— LTE—TDD (SG—FDMA, 1 RB, 10 MHz, x 611 73.0 26 948 1305 #1.7% CAD 16—QAM) Y 5.90 71.4 25.2 _ 1221 Z 5.90 71.7 25.3 146.7 10238— LTE—TDD (SG—FDMA, 1 RB, 15 MHz, x 606 72.7 259 948 1302 £1.9% CAD 16—QAM) Y 591 71.5 25.3 121.9 Z 5.92 71.8 25.4 146.5 10255- CDMA2000, RGC1, SO3, 1/8th Rate 25 fr. x 5.36 69.4 260 1249 1091 +0.9% AAl Y 5.05 67.4 25.3 100.6 Z 4.69 64.6 231 91.1 The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. ° Numerical linearization parameter: uncertainty not required. & Uncertainty is determined using the max. deviation from linear response applying rectangular distribution and is expressed for the square of the field value. Certificate No: EF3—4041_Mar18 Page 5 of 12

EF3DV3 — SN:4041 March 16, 2018 Frequency Response of E—Field (TEM—Cell:ifi110 EXX, Waveguide: R22) 1.5 TTTT Waspons_ ............................................... .................................................... TT Ele: TT TT 1.3 Frequency response {normalized) egen_sfes. TTTT 1‘1 oofereveesesaeees.2 wasta_0oh pe—eeJ OBrmmemccs|_ ............................................... 07Eommeslolceieofofi befel‘Jimmesn.......oitsols..Jest[eneemmmnecefornt 0.6———1 | Lal \ 0 500 1500 2000 f[MHz] CL*] TE%lO") R32 (0) TEM (30°) Uncertainty of Frequency Response of E—field: £ 6.3% (k=2) Certificate No: EF3—4041_Mar18 Page 6 of 12

EF3DV3 — SN:4041 March 16, 2018 Receiving Pattern (¢), 8 = 0° f=600 MHz,TEM,O0° =1800 MHz,R22,0° 90 he yeamtFiags.., a * + — 135, — 45 135. — 45 4 4 4 i & + f ¥ 180« s * +0 8 be o4 os 0s e . & tz "o4a ons os o hw .' \ F3 7 + s + + 225 «os15 2;5 —oms * name « Worpmogge mt . 270 270 ® % & * ® & 4 # Tot X % Z Tot X Y Z Receiving Pattern (¢), 9 = 90° 3 f=600 MHz,TEM,90° f=1800 MHz,R22,90° 8N shi+ 45z .> o. «* T ~ C + V 135 * «45 135 " ~ 45 # % / i \ & ¥ & ® ',/‘ \l -> 4 { 180 +0 180{’ @ o2 o4 o6 08 , 02 04 06 08 #4 t4 }t 1 + I / & & [ ‘# 225 + 315 225 315 * % * ~a /. + 270 \°_rfi"" @ @ © % @ @ © e Tot X Y Z Tot X Y Z Certificate No: EF3—4041_Mar18 Page 7 of 12

EF3DV3 — SN:4041 March 16, 2018 Receiving Pattern (¢), 8 = 0° Error [dB] Uncertainty of Axial Isotropy Assessment: £ 0.5% (k=2) Receiving Pattern (¢), 8 = 90° 05_-..................... ; ..................... ............ a i 3, L § 0.0-_ 8 _ , ; _05--..................... ................... &............ C 1 m po t U 2 $st _e £_4 J——1— t 4009 Of G 1 6 T g I | | —150 —100 —50 50 100 150 Roll [*] C 10[6——'\/1442 600 MHz 1800 MHz 2500 MHz Uncertainty of Axial Isotropy Assessment: £ 0.5% (k=2) Certificate No: EF3—4041_Mar18 Page 8 of 12

EF3DV3 — SN:4041 March 16, 2018 Dynamic Range f{(E—field) (TEM cell , £= 900 MHz) 105 feeroere 104 2 G 3 g) 103 s a. E 10 10 10° 101 10@ 10+ E total [V/im|] not compensated compensated 2 1 ta | C3 1 poriscbolutudeh fayaond wb oo > roreincmalcus 5 0“*"‘“‘*"* c fes Pn prannanmeaiefeneitiite 3 esejgutoeict*/—}} LE M : i 1 i 1 E \\i. i 1 xA s omCWR ic «. 1 ht 19 ' 4 L | 109 101 108 E total [V/m] not compensated compensated Uncertainty of Linearity Assessment: £ 0.6% (k=2) Certificate No: EF3—4041_Mar18 Page 9 of 12

EF3DV3 — SN:4041 March 16, 2018 Deviation from Isotropy in Air Error (¢, 8), f = 900 MHz Deviatio o o t o a N 0 N O —1.0 —0.8 —0.6 —0.4 —0.2 0.0 02 0.4 0.86 0.8 1.0 Uncertainty of Spherical Isotropy Assessment: £ 2.6% (k=2) Certificate No: EF3—4041_Mari8 Page 10 of 12

EF3DV3 — SN:4041 March 16, 2018 DASY/!EASY — Parameters of Probe: EF3DV3 — SN:4041 Other Probe Parameters Sensor Arrangement Rectangular Connector Angle (°) 35 Mechanical Surface Detection Mode enabled Optical Surface Detection Mode disabled Probe Overall Length 335 mm Probe Body Diameter 12 mm Tip Length 25 mm Tip Diameter 4 mm Probe Tip to Sensor X Calibration Point 2.5 mm Probe Tip to Sensor Y Calibration Point 2.5 mm Probe Tip to Sensor Z Calibration Point 2.5 mm Certificate No: EF3—4041_Mar18 Page 11 of 12

EF3DV3 — SN:4041 March 16, 2018 Appendix (Additional assessments outside the scope of SCS 0108) Calibration Parameters for 3—4 GHz Sensor X Sensor Y Sensor Z Unc (k=2) | Norm (uV/(V/im)") * 0.97 0.87 1.18 £10.1 % DCP (my)" 95.9 93.7 93.9 Calibration Parameters for 5—6 GHz Sensor X Sensor Y Sensor Z Unc (k=2) Norm (uV/(V/m)")* 1.13 1.02 1.40 £10.1 % DCP(myv)" 95.9 93.7 93.9 The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. 8 Numerical linearization parameter: uncertainty not required. Calibration procedure for frequencies above 3 GHz is pending accreditation. Certificate No: EF3—4041_Mar18 Page 12 of 12

Schmid & Partner Engineering AG s_ p e a g Zeughausstrasse 43, 8004 Zurich, Switzerland Phone +11 44 245 9700, Fax +41 44 245 9779 in'fo@spealg.com_, http://www.speag.com CUSTOMER CcoPY PROBE REPAIR REPORT— SPEAG Production Center PRODUCT: EF3DV3 Probe ; [SERIAL Nr.: 4041 IN DATE: 5—Mrz—2018 customen: uL cos usA PROBE REPAIR f I . WORKING MATERIAL WORK DESCRIPTION TIME (h) Core replacement: fixed |O] |eXChanged|O | |..os en |o| | [hours Dipole sensor: fixed |0| |exchanged|0| | .............................. |O| j I ]m)urs Substrate: fixed_ |O| lexchang§d|0'i I .............................. iOi I lhours | Components (diodes) fixed |Q| |exchangéd|0| | .............................. |C| L |hours Components (capacitors) |fixed |O|— |@xGhanged |O | |.....ssmeeess [0] | [hours _ Bonding R—lines.~ substrat¢fixed |0| %exchangedlos | .............................. IOJ [ Ihourrrsw Probe tip: fixed IOI Iexchanged IOI I .............................. |O| | . lhours Probe connector: fixed _|O]| |exChang@d|X | =|. se |O0| ||_free|hours Modification D—S fixed |0| lexchanged|O | [------------------------------ [X | | free|hours | Analysis: -hours Finél‘Assembly: | 0.50|hours Total hours | ‘2.50|hours COMMENTS: The probe was returned for calibration. Receiving inspection found that the connector is loose. The connector was replaced in order to— re establish full probe functionality; The probe will newly calibrated after this repair. a. CONDUCTED BY: V\GQ_g}/\/\/W"/f APPROVED BY: {;\éw DATE: 15. Mrz 18 DATE: 15. Mrz 18 ' REPAIR COST: uUsSD Euro MATERIAL COST: free ~|O |X REPAIR: free |O TOTAL COST: > QUOTATION #: 0.00 APPROVED BY: /////gz DATE: 15. Mrz 18 y 860—SPEF3001_4041_180315—C.xIs Page 1 of 1


Document Created: 2018-03-28 11:51:39
Document Modified: 2018-03-28 11:51:39
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC