PY7-34118S_User_Manual_SAR_leaflet_US

FCC ID: PY7-34118S

Users Manual

Download: PDF

FCCID_3807282

This mobile phone 702SO is confirmed to comply with guidelines
relating to effects of radio wave exposure as set forth by the
Council of Europe (CE) and the Federal Communications
Commission (FCC). Refer to the following.

FCC RF Exposure Information
Your handset is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to
radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government.
The guidelines are based on standards that were developed by
independent scientific organization through periodic and thorough
evaluation of scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless handsets employs a unit of
measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6 W/kg. The tests are performed
in positions and locations (e.g. at the ear and worn on the body) as
required by the FCC for each model.
The highest SAR value as reported to the authorities for this phone
model when tested for use by the ear is 0.51 W/kg, when worn on
the body is 0.22 W/kg and when WiFi hotspot mode is 0.81 W/kg.
For body-worn operation, this phone has been tested and meets the
FCC RF exposure guidelines. Please use an accessory designated
for this product or an accessory which contains no metal and which
positions the handset a minimum of 15 mm from the body. For
devices which include "WiFi hotspot" functionality, SAR
measurements for the device operating in WiFi hotspot mode were
taken using a separation distance of 10 mm.
The use of accessories that do not satisfy these requirements may
not comply with FCC RF exposure requirements, and should be
avoided. The FCC has granted an Equipment Authorization for this
model handset with all reported SAR levels evaluated as in
compliance with the FCC RF emission guidelines. SAR information
on this model handset is on file with the FCC and can be found
under the Display Grant section of http://www.fcc.gov/oet/ea/
after searching on FCC ID PY7-34118S.

Additional information on Specific Absorption Rates (SAR) can be
found on the FCC website at https://www.fcc.gov/general/radio-
frequency-safety-0.

The World Health Organization has stated that present scientific
information does not indicate the need for any special precautions
for the use of mobile devices. They note that if you want to reduce
your exposure then you can do so by limiting the length of calls or
using a hands-free device to keep the mobile phone away from the
head and body.

World Health Organization
http://www.who.int/emf
List of Specific Absorption Rates (SAR) for radio waves by
smartphone / 3G model
https://www.softbank.jp/mobile/support/sar/ (Japanese)

FCC Statement for the USA
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) ‌This device must accept any interference received, including
interference that may cause undesired operation.
Any change or modification not expressly approved by Sony may
void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
－－ Reorient or relocate the receiving antenna.
－－ Increase the separation between the equipment and receiver.
－－ Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
－－ Consult the dealer or an experienced radio/TV technician for
help.

Declaration of Conformity for 702SO

Hereby, Sony Mobile declares that the radio equipment type PM-
1112-BV is in compliance with Directive: 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address:
http://www.sonymobile.co.jp/product/SAR/doc/

Manufacturer: Sony Mobile Communications Inc, 4-12-3 Higashi-
Shinagawa, Shinagawa-ku, Tokyo, 140-0002, Japan

For EU product compliance: Sony Belgium, bijkantoor van Sony
Europe Limited, Da Vincilaan 7-D1, 1935 Zaventem, Belgium

Document Created: 2019-03-25 18:51:10
Document Modified: 2019-03-25 18:51:10

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC