16J23633A-S2V1 HAC_T_App B Freq Resp & SNR Test Plots

FCC ID: PY7-21831Z

Test Report

Download: PDF
FCCID_3295391

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 7/25/2016 GSM 850 Communication System: UID 0, GPRS-FDD (TDMA, GMSK, 1 slot) (0); Frequency: 836.6 MHz;Duty Cycle: 1:8.00018 T-Coil scan (scan for ANSI C63.19 2011 compliance)/General Scans ch 190/z (axial) wideband at best S/N/ABM Freq Resp(x,y,z,f) (1x1x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_300-3000_2s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 2000ms BWC applied: 10.80 dB Device Reference Point: 0, 0, -6.3 mm Telephone parameters WD signal quality Category [(signal+noise)-to-noise ratio in decibels] Category T1 0 dB to 10 dB Category T2 10 dB to 20 dB Category T3 20 dB to 30 dB Category T4 > 30 dB Cursor: Diff = 1.37 dB BWC Factor = 10.80 dB Location: -0.3, 0, 3.7 mm Plot No. 1

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 7/25/2016 GSM 850 Communication System: UID 0, GPRS-FDD (TDMA, GMSK, 1 slot) (0); Frequency: 836.6 MHz; Duty Cycle: 1:8.00018 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3083; ; Calibrated: 1/26/2016 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1257; Calibrated: 9/16/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19 2011 compliance)/General Scans ch 190/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 33.00 dB ABM1 comp = 11.43 dBA/m BWC Factor = 0.16 dB Location: -0.4, 0, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 2

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 7/25/2016 GSM 850 Communication System: UID 0, GPRS-FDD (TDMA, GMSK, 1 slot) (0); Frequency: 836.6 MHz; Duty Cycle: 1:8.00018 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3083; ; Calibrated: 1/26/2016 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1257; Calibrated: 9/16/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19 2011 compliance)/General Scans ch 190/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 28.68 dB ABM1 comp = 0.90 dBA/m BWC Factor = 0.16 dB Location: -2.9, -5, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 3

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 7/25/2016 GSM 1900 Communication System: UID 0, GPRS-FDD (TDMA, GMSK, 1 slot) (0); Frequency: 1880 MHz;Duty Cycle: 1:8.00018 T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 661/z (axial) wideband at best S/N/ABM Freq Resp(x,y,z,f) (1x1x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_300-3000_2s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 2000ms BWC applied: 10.80 dB Device Reference Point: 0, 0, -6.3 mm Telephone parameters WD signal quality Category [(signal+noise)-to-noise ratio in decibels] Category T1 0 dB to 10 dB Category T2 10 dB to 20 dB Category T3 20 dB to 30 dB Category T4 > 30 dB Cursor: Diff = 1.75 dB BWC Factor = 10.80 dB Location: -0.2, 0, 3.7 mm Plot No. 4

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 7/25/2016 GSM 1900 Communication System: UID 0, GPRS-FDD (TDMA, GMSK, 1 slot) (0); Frequency: 1880 MHz; Duty Cycle: 1:8.00018 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3083; ; Calibrated: 1/26/2016 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1257; Calibrated: 9/16/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 661/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 37.94 dB ABM1 comp = 11.40 dBA/m BWC Factor = 0.16 dB Location: -0.4, 0, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 5

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 7/25/2016 GSM 1900 Communication System: UID 0, GPRS-FDD (TDMA, GMSK, 1 slot) (0); Frequency: 1880 MHz; Duty Cycle: 1:8.00018 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3083; ; Calibrated: 1/26/2016 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1257; Calibrated: 9/16/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 661/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 33.37 dB ABM1 comp = 1.29 dBA/m BWC Factor = 0.16 dB Location: -2.5, -5, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 6

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 7/25/2016 W-CDMA Band V Communication System: UID 0, UMTS-FDD (WCDMA) (0); Frequency: 836.6 MHz;Duty Cycle: 1:1 T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 4183/z (axial) wideband at best S/N/ABM Freq Resp(x,y,z,f) (1x1x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_300-3000_2s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 2000ms BWC applied: 10.80 dB Device Reference Point: 0, 0, -6.3 mm Telephone parameters WD signal quality Category [(signal+noise)-to-noise ratio in decibels] Category T1 0 dB to 10 dB Category T2 10 dB to 20 dB Category T3 20 dB to 30 dB Category T4 > 30 dB Cursor: Diff = 1.41 dB BWC Factor = 10.80 dB Location: -2.4, -0.1, 3.7 mm Plot No. 7

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 7/25/2016 W-CDMA Band V Communication System: UID 0, UMTS-FDD (WCDMA) (0); Frequency: 836.6 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3083; ; Calibrated: 1/26/2016 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1257; Calibrated: 9/16/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 4183/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 57.12 dB ABM1 comp = 9.50 dBA/m BWC Factor = 0.16 dB Location: -2.5, 0, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 8

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 7/25/2016 W-CDMA Band V Communication System: UID 0, UMTS-FDD (WCDMA) (0); Frequency: 836.6 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3083; ; Calibrated: 1/26/2016 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1257; Calibrated: 9/16/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 4183/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 49.71 dB ABM1 comp = 1.39 dBA/m BWC Factor = 0.16 dB Location: -2.9, 9.2, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 9

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 7/25/2016 W-CDMA Band IV Communication System: UID 0, UMTS-FDD (WCDMA) (0); Frequency: 1732.6 MHz;Duty Cycle: 1:1 T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 1413/z (axial) wideband at best S/N/ABM Freq Resp(x,y,z,f) (1x1x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_300-3000_2s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 2000ms BWC applied: 10.80 dB Device Reference Point: 0, 0, -6.3 mm Telephone parameters WD signal quality Category [(signal+noise)-to-noise ratio in decibels] Category T1 0 dB to 10 dB Category T2 10 dB to 20 dB Category T3 20 dB to 30 dB Category T4 > 30 dB Cursor: Diff = 1.13 dB BWC Factor = 10.80 dB Location: -3.4, -1.2, 3.7 mm Plot No. 10

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 7/25/2016 W-CDMA Band IV Communication System: UID 0, UMTS-FDD (WCDMA) (0); Frequency: 1732.6 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3083; ; Calibrated: 1/26/2016 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1257; Calibrated: 9/16/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 1413/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 54.69 dB ABM1 comp = 7.84 dBA/m BWC Factor = 0.16 dB Location: -3.3, -1.3, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 11

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 7/25/2016 W-CDMA Band IV Communication System: UID 0, UMTS-FDD (WCDMA) (0); Frequency: 1732.6 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3083; ; Calibrated: 1/26/2016 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1257; Calibrated: 9/16/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 1413/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 49.16 dB ABM1 comp = 2.45 dBA/m BWC Factor = 0.16 dB Location: -1.2, 8.7, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 12

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 7/25/2016 W-CDMA Band II Communication System: UID 0, UMTS-FDD (WCDMA) (0); Frequency: 1880 MHz;Duty Cycle: 1:1 T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 9400/z (axial) wideband at best S/N/ABM Freq Resp(x,y,z,f) (1x1x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_300-3000_2s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 2000ms BWC applied: 10.80 dB Device Reference Point: 0, 0, -6.3 mm Telephone parameters WD signal quality Category [(signal+noise)-to-noise ratio in decibels] Category T1 0 dB to 10 dB Category T2 10 dB to 20 dB Category T3 20 dB to 30 dB Category T4 > 30 dB Cursor: Diff = 1.50 dB BWC Factor = 10.80 dB Location: -3.9, -0.2, 3.7 mm Plot No. 13

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 7/25/2016 W-CDMA Band II Communication System: UID 0, UMTS-FDD (WCDMA) (0); Frequency: 1880 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3083; ; Calibrated: 1/26/2016 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1257; Calibrated: 9/16/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 9400/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 53.70 dB ABM1 comp = 7.32 dBA/m BWC Factor = 0.16 dB Location: -3.7, -0.4, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 14

Test Laboratory: UL Verification Services Inc., SAR Lab 2 Date: 7/25/2016 W-CDMA Band II Communication System: UID 0, UMTS-FDD (WCDMA) (0); Frequency: 1880 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3083; ; Calibrated: 1/26/2016 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1257; Calibrated: 9/16/2015 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19-2007 & 2011 compliance)/General Scans ch 9400/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 48.88 dB ABM1 comp = 1.23 dBA/m BWC Factor = 0.16 dB Location: -2.9, 8.3, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 15


Document Created: 2016-07-26 11:06:54
Document Modified: 2016-07-26 11:06:54
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC