12073310-S2V3 Appendix B

FCC ID: PY7-21831A

Test Report

Download: PDF
FCCID_3721457

Test Laboratory: UL Verification Services Inc. SAR Lab C Date: 12/26/2017 GSM 850 Communication System: UID 0, GPRS-FDD (TDMA, GMSK, 1 slot) (0); Frequency: 836.6 MHz;Duty Cycle: 1:8.00018 T-Coil scan (scan for ANSI C63.19 2011 compliance)/GSM 850 Ch 190/z (axial) wideband at best S/N/ABM Freq Resp(x,y,z,f) (1x1x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_300-3000_2s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 2000ms BWC applied: 10.80 dB Device Reference Point: 0, 0, -6.3 mm Telephone parameters WD signal quality Category [(signal+noise)-to-noise ratio in decibels] Category T1 0 dB to 10 dB Category T2 10 dB to 20 dB Category T3 20 dB to 30 dB Category T4 > 30 dB Cursor: Diff = 1.71 dB BWC Factor = 10.80 dB Location: 0, 1.2, 3.7 mm Plot No. 1

Test Laboratory: UL Verification Services Inc. SAR Lab C Date: 12/26/2017 GSM 850 Communication System: UID 0, GPRS-FDD (TDMA, GMSK, 1 slot) (0); Frequency: 836.6 MHz; Duty Cycle: 1:8.00018 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/20/2017 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1343; Calibrated: 8/21/2017 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19 2011 compliance)/GSM 850 Ch 190/z (axial) 4.2mm 50 x 50/ABM SNR Category(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 46.96 dB ABM1 comp = 14.59 dBA/m BWC Factor = 0.16 dB Location: 0, 1.2, 3.7 mm Reference Point: 0, 0, -6.3 mm ABM2 = 6.91 dBA/m Location: 20.8, 4.2, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 2

Test Laboratory: UL Verification Services Inc. SAR Lab C Date: 12/26/2017 GSM 850 Communication System: UID 0, GPRS-FDD (TDMA, GMSK, 1 slot) (0); Frequency: 836.6 MHz; Duty Cycle: 1:8.00018 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/20/2017 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1343; Calibrated: 8/21/2017 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19 2011 compliance)/GSM 850 Ch 190/y (transversal) 4.2mm 50 x 50/ABM SNR Category(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 34.75 dB ABM1 comp = 0.24 dBA/m BWC Factor = 0.16 dB Location: -2.9, 4.2, 3.7 mm ABM2 = -0.08 dBA/m Location: 25, 25, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 3

Test Laboratory: UL Verification Services Inc. SAR Lab C Date: 12/26/2017 GSM 1900 Communication System: UID 0, GPRS-FDD (TDMA, GMSK, 1 slot) (0); Frequency: 1880 MHz;Duty Cycle: 1:8.00018 T-Coil scan (scan for ANSI C63.19 2011 compliance)/GSM 1900 Ch 661/z (axial) wideband at best S/N/ABM Freq Resp(x,y,z,f) (1x1x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_300-3000_2s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 2000ms BWC applied: 10.80 dB Device Reference Point: 0, 0, -6.3 mm Telephone parameters WD signal quality Category [(signal+noise)-to-noise ratio in decibels] Category T1 0 dB to 10 dB Category T2 10 dB to 20 dB Category T3 20 dB to 30 dB Category T4 > 30 dB Cursor: Diff = 2.00 dB BWC Factor = 10.80 dB Location: 0, 1.1, 3.7 mm Plot No. 4

Test Laboratory: UL Verification Services Inc. SAR Lab C Date: 12/26/2017 GSM 1900 Communication System: UID 0, GPRS-FDD (TDMA, GMSK, 1 slot) (0); Frequency: 1880 MHz; Duty Cycle: 1:8.00018 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/20/2017 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1343; Calibrated: 8/21/2017 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19 2011 compliance)/GSM 1900 Ch 661/z (axial) 4.2mm 50 x 50/ABM SNR Category(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 48.14 dB ABM1 comp = 14.38 dBA/m BWC Factor = 0.16 dB Location: 0, 1.2, 3.7 mm ABM2 = 3.56 dBA/m Location: 20.8, 4.2, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 5

Test Laboratory: UL Verification Services Inc. SAR Lab C Date: 12/26/2017 GSM 1900 Communication System: UID 0, GPRS-FDD (TDMA, GMSK, 1 slot) (0); Frequency: 1880 MHz; Duty Cycle: 1:8.00018 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/20/2017 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1343; Calibrated: 8/21/2017 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19 2011 compliance)/GSM 1900 Ch 661/y (transversal) 4.2mm 50 x 50/ABM SNR Category(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 36.66 dB ABM1 comp = 0.39 dBA/m BWC Factor = 0.16 dB Location: -2.5, 4.6, 3.7 mm ABM2 = -3.49 dBA/m Location: 25, 25, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 6

Test Laboratory: UL Verification Services Inc. SAR Lab C Date: 1/17/2018 W-CDMA Band II WB 6.6kb Communication System: UID 0, UMTS-FDD (WCDMA) (0); Frequency: 1880 MHz;Duty Cycle: 1:1 T-Coil scan (scan for ANSI C63.19 2011 compliance)/W-CDMA Band II Ch 9400 WB 6.65kb/z (axial) wideband at best S/N/ABM Freq Resp(x,y,z,f) (1x1x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_300-3000_2s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 2000ms BWC applied: 10.80 dB Device Reference Point: 0, 0, -6.3 mm Telephone parameters WD signal quality Category [(signal+noise)-to-noise ratio in decibels] Category T1 0 dB to 10 dB Category T2 10 dB to 20 dB Category T3 20 dB to 30 dB Category T4 > 30 dB Cursor: Diff = 0.28 dB BWC Factor = 10.80 dB Location: 0, 0.3, 3.7 mm Plot No. 7

Test Laboratory: UL Verification Services Inc. SAR Lab C Date: 1/17/2018 W-CDMA Band II WB 6.6kb Communication System: UID 0, UMTS-FDD (WCDMA) (0); Frequency: 1880 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/20/2017 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1343; Calibrated: 8/21/2017 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19 2011 compliance)/W-CDMA Band II Ch 9400 WB 6.65kb/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 45.17 dB ABM1 comp = 8.95 dBA/m BWC Factor = 0.16 dB Location: 0, 0.4, 3.7 mm ABM2 = -23.84 dBA/m Location: 16.7, 12.5, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 8

Test Laboratory: UL Verification Services Inc. SAR Lab C Date: 1/17/2018 W-CDMA Band II WB 6.6kb Communication System: UID 0, UMTS-FDD (WCDMA) (0); Frequency: 1880 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/20/2017 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1343; Calibrated: 8/21/2017 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19 2011 compliance)/W-CDMA Band II Ch 9400 WB 6.65kb/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 38.50 dB ABM1 comp = 0.99 dBA/m BWC Factor = 0.16 dB Location: 1.3, 9.6, 3.7 mm ABM2 = -31.12 dBA/m Location: 20.8, 25, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 9

Test Laboratory: UL Verification Services Inc. SAR Lab C Date: 1/17/2018 W-CDMA Band IV WB 6.6kb Communication System: UID 0, UMTS-FDD (WCDMA) (0); Frequency: 1732.6 MHz;Duty Cycle: 1:1 T-Coil scan (scan for ANSI C63.19 2011 compliance)/W-CDMA Band IV Ch 1413 WB 6.6kb/z (axial) wideband at best S/N/ABM Freq Resp(x,y,z,f) (1x1x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_300-3000_2s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 2000ms BWC applied: 10.80 dB Device Reference Point: 0, 0, -6.3 mm Telephone parameters WD signal quality Category [(signal+noise)-to-noise ratio in decibels] Category T1 0 dB to 10 dB Category T2 10 dB to 20 dB Category T3 20 dB to 30 dB Category T4 > 30 dB Cursor: Diff = 0.73 dB BWC Factor = 10.80 dB Location: 0.1, 1.1, 3.7 mm Plot No. 10

Test Laboratory: UL Verification Services Inc. SAR Lab C Date: 1/17/2018 W-CDMA Band IV WB 6.6kb Communication System: UID 0, UMTS-FDD (WCDMA) (0); Frequency: 1732.6 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/20/2017 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1343; Calibrated: 8/21/2017 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19 2011 compliance)/W-CDMA Band IV Ch 1413 WB 6.6kb/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 46.17 dB ABM1 comp = 9.20 dBA/m BWC Factor = 0.16 dB Location: 0, 1.2, 3.7 mm ABM2 = -24.24 dBA/m Location: 16.7, 16.7, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 11

Test Laboratory: UL Verification Services Inc. SAR Lab C Date: 1/17/2018 W-CDMA Band IV WB 6.6kb Communication System: UID 0, UMTS-FDD (WCDMA) (0); Frequency: 1732.6 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/20/2017 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1343; Calibrated: 8/21/2017 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19 2011 compliance)/W-CDMA Band IV Ch 1413 WB 6.6kb/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 39.81 dB ABM1 comp = 1.61 dBA/m BWC Factor = 0.16 dB Location: 0.4, 8.7, 3.7 mm ABM2 = -31.16 dBA/m Location: 20.8, 25, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 12

Test Laboratory: UL Verification Services Inc. SAR Lab C Date: 1/17/2018 W-CDMA Band V WB 6.6kb Communication System: UID 0, UMTS-FDD (WCDMA) (0); Frequency: 836.6 MHz;Duty Cycle: 1:1 T-Coil scan (scan for ANSI C63.19 2011 compliance)/W-CDMA Band V Ch 4183 WB 6.6kb/z (axial) wideband at best S/N/ABM Freq Resp(x,y,z,f) (1x1x1): Measurement grid: dx=10mm, dy=10mm Signal Type: Audio File (.wav) 48k_voice_300-3000_2s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 2000ms BWC applied: 10.80 dB Device Reference Point: 0, 0, -6.3 mm Telephone parameters WD signal quality Category [(signal+noise)-to-noise ratio in decibels] Category T1 0 dB to 10 dB Category T2 10 dB to 20 dB Category T3 20 dB to 30 dB Category T4 > 30 dB Cursor: Diff = 0.17 dB BWC Factor = 10.80 dB Location: 0.2, 0.3, 3.7 mm Plot No. 13

Test Laboratory: UL Verification Services Inc. SAR Lab C Date: 1/17/2018 W-CDMA Band V WB 6.6kb Communication System: UID 0, UMTS-FDD (WCDMA) (0); Frequency: 836.6 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/20/2017 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1343; Calibrated: 8/21/2017 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19 2011 compliance)/W-CDMA Band V Ch 4183 WB 6.6kb/z (axial) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 45.74 dB ABM1 comp = 9.30 dBA/m BWC Factor = 0.16 dB Location: 0, 0.4, 3.7 mm ABM2 = -23.44 dBA/m Location: 20.8, 12.5, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 14

Test Laboratory: UL Verification Services Inc. SAR Lab C Date: 1/17/2018 W-CDMA Band V WB 6.6kb Communication System: UID 0, UMTS-FDD (WCDMA) (0); Frequency: 836.6 MHz; Duty Cycle: 1:1 Phantom section: TCoil Section DASY5 Configuration: - Probe: AM1DV3 - 3092; ; Calibrated: 7/20/2017 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn1343; Calibrated: 8/21/2017 - Phantom: HAC Test Arch with AMCC; Type: SD HAC P01 BB - Measurement SW: DASY52, Version 52.8 (7);SEMCAD X Version 14.6.10 (7164) T-Coil scan (scan for ANSI C63.19 2011 compliance)/W-CDMA Band V Ch 4183 WB 6.6kb/y (transversal) 4.2mm 50 x 50/ABM Interpolated SNR(x,y,z) (121x121x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Signal Type: Audio File (.wav) 48k_voice_1kHz_1s.wav Output Gain: 100 Measure Window Start: 300ms Measure Window Length: 1000ms BWC applied: 0.16 dB Device Reference Point: 0, 0, -6.3 mm Cursor: ABM1/ABM2 = 38.57 dB ABM1 comp = 1.44 dBA/m BWC Factor = 0.16 dB Location: 1.3, 8.7, 3.7 mm ABM2 = -31.15 dBA/m Location: 20.8, 25, 3.7 mm 0 dB = 1.000 = 0.00 dB Plot No. 15


Document Created: 2018-01-18 22:31:59
Document Modified: 2018-01-18 22:31:59
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC