PY7-04685Z_User_Manual_SAR leaflet_US

FCC ID: PY7-04685Z

Users Manual

Download: PDF
FCCID_3860552

Radio Wave Exposure and Specific FCC Statement for the USA Absorption Rate (SAR) Information This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: ■ United States (1) This device may not cause harmful interference, and THIS PHONE MODEL HAS BEEN CERTIFIED IN COMPLIANCE WITH THE (2) This device must accept any interference received, including interference that GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. may cause undesired operation. The SOV38 Series mobile phones have been designed to comply with applicable Any change or modification not expressly approved by Sony may void the user's safety requirements for exposure to radio waves. Your wireless phone is a radio authority to operate the equipment. transmitter and receiver. It is designed to not exceed the limits* of exposure to radio frequency (RF) energy set by governmental authorities. These limits establish This equipment has been tested and found to comply with the limits for a Class B permitted levels of RF energy for the general population. The guidelines are based digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to on standards that were developed by international scientific organizations through provide reasonable protection against harmful interference in a residential periodic and thorough evaluation of scientific studies. The standards include a installation. This equipment generates, uses and can radiate radio frequency energy safety margin designed to assure the safety of all individuals, regardless of age and and, if not installed and used in accordance with the instructions, may cause health. harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. The radio wave exposure guidelines employ a unit of measurement known as the Specific Absorption Rate (SAR). Tests for SAR are conducted using standardized If this equipment does cause harmful interference to radio or television reception, methods with the phone transmitting at its highest certified power level in all used which can be determined by turning the equipment off and on, the user is frequency bands. While there may be differences between the SAR levels of various encouraged to try to correct the interference by one or more of the following phone models, they are all designed to meet the relevant guidelines for exposure to measures: radio waves. For more information on SAR, please refer to the important information chapter in the User Guide. - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. The highest SAR value as reported to the authorities for this phone model when - Connect the equipment into an outlet on a circuit different from that to which the tested for use by the ear is 0.31 W/kg*, when worn on the body is 0.26 W/kg* and receiver is connected. when WiFi hotspot mode is 0.67 W/kg. For body-worn operation, the phone has - Consult the dealer or an experienced radio/TV technician for help. been tested when positioned a minimum of 15 mm from the body without any metal parts in the vicinity of the phone or when properly used with an appropriate Declaration of Conformity for SOV38 accessory and worn on the body. For devices which include "WiFi hotspot" functionality, SAR measurements for the device operating in WiFi hotspot mode were taken using a separation distance of 10mm. Use of third-party accessories may result in different SAR levels than those reported. Hereby, Sony Mobile declares that the radio equipment type PM-1126-BV is in ** Before a phone model is available for sale to the public in the US, it must be compliance with Directive: 2014/53/EU. tested and certified by the Federal Communications Commission (FCC) that it The full text of the EU declaration of conformity is available at the following internet does not exceed the limit established by the government-adopted requirement for address: http://www.sonymobile.co.jp/product/SAR/doc/ safe exposure*. The tests are performed in positions and locations (i.e., by the ear and worn on the body) as required by the FCC for each model. The FCC has Manufacturer: Sony Mobile Communications Inc, 4-12-3 Higashi-Shinagawa, granted an Equipment Authorization for this phone model with all reported SAR Shinagawa-ku, Tokyo, 140-0002, Japan levels evaluated as in compliance with the FCC RF exposure guidelines. While there may be differences between the SAR levels of various phones, all mobile For EU product compliance: Sony Belgium, bijkantoor van Sony Europe Limited, Da phones granted an FCC equipment authorization meet the government Vincilaan 7-D1, 1935 Zaventem, Belgium requirement for safe exposure. SAR information on this phone model is on file at the FCC and can be found under the Display Grant section of http:// transition.fcc.gov/oet/ea/fccid/ after searching on FCC ID PY7-04685Z. Additional information on SAR can be found on the Mobile Manufacturers Forum EMF website at http://www.emfexplained.info/. * In the United States, the SAR limit for mobile phones used by the public is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The standard incorporates a margin of safety to give additional protection for the public and to account for any variations in measurements. ** This paragraph is only applicable to authorities and customers in the United States.


Document Created: 2019-04-18 06:18:58
Document Modified: 2019-04-18 06:18:58
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC