Users Manual

FCC ID: PY3WGT634U

Users Manual

Download: PDF
FCCID_398530

c. Securely insert the Ethernet cable from your broadband modem into the Internet port (B) on the WGT634U. Installation Guide Internet Port B Start Here Power Internet Port LAN Port 4 Follow these instructions to set up your router. 108 Mbps Wireless Broadband modem d. Check the status lights and verify the following: Verify That Basic Requirements Are Met Media Router WGT634U • Power: The power light goes on when your turn the router on. Assure that the following requirements are met: d. Securely insert one end of the Ethernet cable that came with your router into a • LAN: A LAN light on the router such as the one for LAN port 4 is lit. If no • You have your broadband Internet service settings handy. LAN port on the router such as LAN port 4 (C), and the other end into the LAN lights are lit, check that the Ethernet cable connecting the powered on • The networking settings of the computer are set to obtain an IP address automatically. Ethernet port of your computer (D). computer to the router is securely attached at both ends. For instructions on how to do this, please see the animated tutorials on the 108 Mbps • Internet: The Internet light on the router is lit. If the Internet light is not lit, Wireless Media Router Resource CD for Windows® computers or the Reference Manual check that the Ethernet cable is securely attached to the router Internet port on the 108 Mbps Wireless Media Router Resource CD for Macintosh® computers. and the powered on modem. • For USB disk file sharing, you must have an approved USB storage device. See the Reference Manual on the 108 Mbps Wireless Media Router Resource CD for a list of LAN Port 4 approved devices. D C 3 a.LogFrom in to the Router your PC, launch a browser such as Internet Explorer or Netscape® Navigator. First, Connect the Router to the Internet b. Connect to the router by typing http://192.168.1.1 in the address field. 1 Connect the Router Between Your PC & Modem a. Turn off your computer and cable or DSL broadband modem. 108 Mbps Wireless Media Router WGT634U Broadband modem b. Disconnect the Ethernet cable (A) which connects from the Ethernet port of your computer to the cable 2 Restart Your Network in the Correct Sequence c. When prompted, enter admin for the router user name and password for the or DSL broadband modem. A Warning: Failure to restart your network in the correct sequence could prevent you router password, both in lower case letters. from connecting to the Internet. d. After logging in to the router, you will see the Internet Connection Setup a. First, turn on the cable or DSL modem and wait 2 minutes. Wizard on the settings main page. b. Now, turn on your router by plugging in the power cord, and then wait 30 seconds. c. Last, turn on your computer. Note: If software usually logs you in to the Internet, do not run that software or Broadband modem cancel it if it starts automatically.

Make sure the Ethernet cables are securely plugged in 4 Run the Setup Wizard to Connect to the Internet 2 Configure the Wireless Adapter Settings Use the settings in step 1 to configure the wireless adapter of your computer. The • For each powered on computer connected to the router with a securely plugged in Ethernet cable, the corresponding router LAN port status light will be lit. The label settings of the computer and router must match exactly. on the bottom of the router identifies the number of each LAN port. • The Internet port status light on the router will be lit if the Ethernet cable from the router to the modem is plugged in securely and the modem and router are turned on. 3 Verify Wireless Connectivity Verify wireless connectivity by connecting to the Internet or by logging in to the Make sure the network settings are correct router. If you have problems with wireless connectivity, refer to the Troubleshooting • LAN and wirelessly connected computers must be configured to obtain an IP address Tips below or to the Reference Manual on the 108 Mbps Wireless Media Router automatically via DHCP. For instructions on how to do this, please see the animated Resource CD. tutorials on the 108 Mbps Wireless Media Router Resource CD or Appendix C in the a. You are now connected to the router. If you do not see the menu above, click the Setup Wizard link on the upper left of the main menu. You are now wirelessly connected to the Internet! Set up wireless security according Reference Manual on the 108 Mbps Wireless Media Router Resource CD. to the instructions in the Wireless chapter of the Reference Manual on the 108 Mbps • Some cable modem ISPs require you to set the router to use the MAC address of the b. Click Nextto proceed. Follow the screen prompts and input your ISP settings, as needed. Wireless Media Router Resource CD. computer registered on the account. If so, in the Basic Settings menu Router MAC c. If prompted with the message that new software is available, click Yes to update Address section, select “Use this Computer’s MAC address.” The router will then your router with the latest software enhancements. capture and use the MAC address of the computer that you are now using. You must d. At the end of the Setup Wizard, click the Test button to verify your Internet be using the computer that is registered with the ISP. Click Apply to save your connection and register your product. If you have trouble connecting to the How Do I Set Up File and Photo Sharing? settings. Restart the network in the correct sequence. Internet, use the Troubleshooting Tips below to correct basic problems, or refer For information on how to set up the USB storage device for file/photo sharing and to the Reference Manual on the 108 Mbps Wireless Media Router Resource CD. approved USB drives, please refer to the Reference Manual on the 108 Mbps Wireless Media You are now connected to the Internet! Router Resource CD. Technical Support Note: Do not connect the USB storage device until prompted to do so by the File/Photo Sharing Wizard. PLEASE REFER TO THE SUPPORT INFORMATION CARD THAT SHIPPED WITH YOUR PRODUCT. Now, Set Up Basic Wireless Connectivity By registering your product at www.NETGEAR.com/register, we can provide you with faster expert technical support and timely notices of product and software upgrades. 1 Configure the WGT634U Wireless Settings Click Wireless Settings in the main menu. Troubleshooting Tips Select a Region. Leave the other settings Here are some tips for correcting simple problems that prevent you from connecting to the Attention: When you configure the wireless settings of this device unchanged. Click Apply to save your changes. Internet or connecting to the router. 0560 ! please make sure to select the correct country settings. Due to EU-law the country settings must be identical to the country, where Make sure the wireless settings in the computer and router the device is operating (important due to non-harmonized frequencies in the EU). match exactly 802.11b Restrictions: European standards dictate maximum radiated transmit power of • The Wireless Network Name (SSID), channel, and WEP settings of the router and 100 mW EIRP and frequency range of 2.400 – 2.4835 GHz. In France, the equipment must Wireless Feature Default Setting wireless computer must match exactly. be restricted to the 2.4465 – 2.4835 GHz frequency range and must be restricted to indoor use. Network Name (SSID) NETGEAR WEP Security Disabled Be sure to restart your network in the correct sequence ©2004 NETGEAR, Inc. NETGEAR, the Netgear logo and Everybody's connecting are trademarks or registered • Follow this sequence. Turn off the modem, router, and computer. Turn on the modem trademarks of Netgear, Inc. in the United States and/or other countries. Microsoft and Windows are registered first and wait two minutes. Next turn on the router, and finally the computer. trademarks of Microsoft Corporation in the United States and/or other countries. Other brand and product *201-10094-01* names are trademarks or registered trademarks of their respective holders. Information is 201-10094-01 February 2004 subject to change without notice. All rights reserved.

Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: -•Reorient or relocate the receiving antenna. -•Increase the separation between the equipment and receiver. -•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -•Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.


Document Created: 2004-02-18 09:20:58
Document Modified: 2004-02-18 09:20:58
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC