RF Exposure Info

FCC ID: PY3WG602

RF Exposure Info

Download: PDF
FCCID_305037

             Industrial Technology Research Institute                         FCC ID :PY3WG602
             Electronics Research & Service Organization                      Report No.:510-9201-032F
             Bldg. 17, 195-4 Sec. 4, Chung Hsing Rd., Chutung,Hsinchu, 310
             Taiwan,Republic Of China                                         Page     1  of    2
             TEL : 886-3-5917069 FAX : 886-3-5825720




9. RF EXPOSURE EVALUATION

  According to FCC 1.1310 : The criteria listed in the following table shall be used to evaluate the
  environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b)
  LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE)

   Frequency Range          Electric Field           Magnetic Field          Power Density
                                                                                             Average Time
        (MHz)              Strength (V/m)            Strength (A/m)           (mW/cm2)
                             (A) Limits for Occupational / Control Exposures
    300-1,500                        --                        --                F/300            6
    1,500-100,000                    --                        --                 5               6
                       (B) Limits for General Population / Uncontrol Exposures
    300-1,500                        --                        --               F/1500            6
    1,500-100,000                    --                        --                 1               30



     9.1 FRIIS FORMULA
         Friis transmission formula : Pd = (Pout*G)/(4*pi*r2)
         Where
         Pd = power density in mW/cm2
         Pout = output power to antenna in mW
         G = gain of antenna in linear scale
         Pi = 3.1416
         R = distance between observation point and center of the radiator in cm
         Pd id the limit of MPE, 1 mW/cm2. If we know the maximum gain of the antenna and the
         total power input to the antenna, through the calculation, we will know the distance r
         where the MPE limit is reached.


     9.2 EUT OPERATING CONDITION
         A software provided by client enabled the EUT to transmit and receive data at lowest,
         middle and highest channel individually.


             Industrial Technology Research Institute                         FCC ID :PY3WG602
             Electronics Research & Service Organization                      Report No.:510-9201-032F
              Bldg. 17, 195-4 Sec. 4, Chung Hsing Rd., Chutung,Hsinchu, 310
              Taiwan,Republic Of China                                        Page     2  of    2
              TEL : 886-3-5917069 FAX : 886-3-5825720




  9.3 TEST RESULT OF RF EXPOSURE EVALUATION

          Test Item : RF Exposure Evaluation Data
          Test Mode : Normal Operation


          9.3.1 ANTENNA GAIN

          Antenna Gain:The maximum Gain measured in fully anechoic chamber is 2dBi
          linear scale.


          9.3.2 OUTPUT POWER INTO ANTENNA & RF EXPOSURE
                EVALUATION DISTANCE


                                                      Output Power to Antenna           Minimum Allowable
Channel      Channel Frequency (MHz)
                                                              (dBm)                  Distance  From Skin(cm)
 CH1                      2412.00                                   17.46                    2.650911
 CH6                      2437.00                                   17.38                   2.626607
 CH11                     2462.00                                   17.35                   2.617550



Document Created: 2003-01-23 15:42:10
Document Modified: 2003-01-23 15:42:10

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC