RF Test Report-Transmit Simultaneously

FCC ID: PY319200450

Test Report

Download: PDF
FCCID_4390132

FCC Test Report (Co-Located) Report No.: RF190715C12-2 FCC ID: PY319200450 Test Model: RBS10 Received Date: Jul. 15, 2019 Test Date: Jul. 29 ~ Jul. 31, 2019 Issued Date: Jul. 31, 2019 Applicant: NETGEAR, INC. Address: 350 East Plumeria Drive San Jose, CA 95134 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) FCC Registration / 788550 / TW0003 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF190715C12-2 Page No. 1 / 24 Report Format Version: 6.1.1

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail............................................................................. 9 3.3 Description of Support Units ............................................................................................................. 10 3.3.1 Configuration of System under Test .................................................................................................. 10 3.4 General Description of Applied Standards ........................................................................................ 10 4 Test Types and Results ....................................................................................................................... 11 4.1 Radiated Emission and Bandedge Measurement.............................................................................. 11 4.1.1 Limits of Radiated Emission and Bandedge Measurement ............................................................... 11 4.1.2 Test Instruments ................................................................................................................................ 12 4.1.3 Test Procedures................................................................................................................................. 13 4.1.4 Deviation from Test Standard ............................................................................................................ 13 4.1.5 Test Setup .......................................................................................................................................... 14 4.1.6 EUT Operating Conditions................................................................................................................. 15 4.1.7 Test Results ....................................................................................................................................... 16 5 Pictures of Test Arrangements .......................................................................................................... 22 Annex A- Radiated Out of Band Emission (OOBE) Measurement (For U-NII-3 band) ............................ 23 Appendix – Information of the Testing Laboratories ................................................................................. 24 Report No.: RF190715C12-2 Page No. 2 / 24 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued RF190715C12-2 Original release. Jul. 31, 2019 Report No.: RF190715C12-2 Page No. 3 / 24 Report Format Version: 6.1.1

1 Certificate of Conformity Product: Orbi Satellite Brand: NETGEAR Test Model: RBS10 Sample Status: Engineering sample Applicant: NETGEAR, INC. Test Date: Jul. 29 ~ Jul. 31, 2019 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) 47 CFR FCC Part 15, Subpart E (Section 15.407) ANSI C63.10:2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Jul. 31, 2019 Pettie Chen / Senior Specialist Approved by : , Date: Jul. 31, 2019 Bruce Chen / Project Engineer Report No.: RF190715C12-2 Page No. 4 / 24 Report Format Version: 6.1.1

2 Summary of Test Results Applied 47 CFR FCC Part 15, Subpart C (Section 15.247) Standard 47 CFR FCC Part 15, Subpart E (Section 15.407) FCC Test Item Result Remarks Clause 15.205 / 15.209 / Meet the requirement of limit. 15.247(d) Radiated Emissions Pass Minimum passing margin is -3.5dB at 15.407(b) 11490.00MHz. (1/2/3/4/6) *For U-NII-3 band compliance with rule part 15.407(b)(4)(i), the OOBE test plots were recorded in Annex A. Note: Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Expanded Uncertainty Measurement Frequency (k=2) (±) 9kHz ~ 30MHz 3.04 dB Radiated Emissions up to 1 GHz 30MHz ~ 200MHz 3.86 dB 200MHz ~1000MHz 3.87 dB 1GHz ~ 18GHz 2.29 dB Radiated Emissions above 1 GHz 18GHz ~ 40GHz 2.29 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF190715C12-2 Page No. 5 / 24 Report Format Version: 6.1.1

3 General Information 3.1 General Description of EUT Product Orbi Satellite Brand NETGEAR Test Model RBS10 Sample Status Engineering sample Power Supply Rating 12Vdc (adapter) CCK, DQPSK, DBPSK for DSSS Modulation Type 256QAM, 64QAM, 16QAM, QPSK, BPSK for OFDM Modulation Technology DSSS, OFDM 802.11b:11/5.5/2/1Mbps 802.11g: 54/48/36/24/18/12/9/6Mbps 802.11a: 54/48/36/24/18/12/9/6Mbps Transfer Rate 802.11n (2.4GHz): up to 400Mbps 802.11n (5.0GHz): up to 300Mbps 802.11ac: up to 867Mbps Operating Frequency 2412~2462MHz, 5180~5240MHz, 5745~5825MHz 2412~2462MHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (VHT20): 11 802.11n (HT40), 802.11n (VHT40): 7 5180~5240MHz: 802.11a, 802.11n (HT20), 802.11ac (VHT20): 4 Number of Channel 802.11n (HT40), 802.11ac (VHT40): 2 802.11ac (VHT80): 1 5745~5825MHz: 802.11a, 802.11n (HT20), 802.11ac (VHT20): 5 802.11n (HT40), 802.11ac (VHT40): 2 802.11ac (VHT80): 1 Antenna Type Refer to Note Antenna Connector Refer to Note Accessory Device Adapter Cable Supplied NA Report No.: RF190715C12-2 Page No. 6 / 24 Report Format Version: 6.1.1

Note: 1. The EUT incorporates a MIMO function. Physically, the EUT provides 2 completed transmitters and 2 receivers. Band Modulation Mode CDD Mode Beamforming Mode TX Function 802.11b Support Not Support 2TX 802.11g Support Not Support 2TX 802.11n (HT20) Support Support 2TX 2.4GHz 802.11n (HT40) Support Support 2TX 802.11n (VHT20) Support Support 2TX 802.11n (VHT40) Support Support 2TX Band Modulation Mode CDD Mode Beamforming Mode TX Function 802.11a Support Not Support 2TX 802.11n (HT20) Support Support 2TX 802.11n (HT40) Support Support 2TX 5.0GHz 802.11ac (VHT20) Support Support 2TX 802.11ac (VHT40) Support Support 2TX 802.11ac (VHT80) Support Support 2TX * The modulation and bandwidth are similar for 802.11n mode for HT20/HT40 and 802.11ac mode for VHT20/VHT40, therefore investigated worst case to representative mode in test report. (Final test mode refer section 3.2.1) * For 802.11n and 802.11ac, CDD mode and Beamforming mode are presented in power output test item. For other test items, CDD mode is the worst case for final tests after pretesting. 2. The EUT uses following adapters. Adapter 1 Brand NETGEAR Model 2AAJ012F1 P/N 332-11510-01 Input Power 100-120Vac~50/60Hz 0.35A Output Power 12.0Vdc / 1.0A Power Line 1.85m power cable without core attached on adapter Adapter 2 Brand NETGEAR Model AD2071F10 P/N 332-11515-01 Input Power 100-120Vac~50/60Hz 0.3A Output Power 12Vdc / 1A Power Line 1.80m power cable without core attached on adapter 3. The following antennas were provided to the EUT. Ant. Type PIFA Connector I-PEX Gain (dBi) Ant. 0 Ant. 1 Directional Gain 2.4GHz 1.54 1.54 4.55 5GHz Band 1 2.51 2.51 5.52 5GHz Band 4 3.88 3.88 6.89 Report No.: RF190715C12-2 Page No. 7 / 24 Report Format Version: 6.1.1

3.2 Description of Test Modes 2412~2462MHz: 11 channels are provided for 802.11b, 802.11g and 802.11n (HT20), 802.11n (VHT20): Channel Frequency Channel Frequency 1 2412MHz 7 2442MHz 2 2417MHz 8 2447MHz 3 2422MHz 9 2452MHz 4 2427MHz 10 2457MHz 5 2432MHz 11 2462MHz 6 2437MHz 7 channels are provided for 802.11n (HT40), 802.11n (VHT40): Channel Frequency Channel Frequency 3 2422MHz 7 2442MHz 4 2427MHz 8 2447MHz 5 2432MHz 9 2452MHz 6 2437MHz 5180~5240MHz: 4 channels are provided for 802.11a, 802.11n (HT20), 802.11ac (VHT20): Channel Frequency Channel Frequency 36 5180MHz 44 5220MHz 40 5200MHz 48 5240MHz 2 channels are provided for 802.11n (HT40), 802.11ac (VHT40): Channel Frequency Channel Frequency 38 5190MHz 46 5230MHz 1 channel is provided for 802.11ac (VHT80): Channel Frequency 42 5210MHz 5745~5825MHz: 5 channels are provided for 802.11a, 802.11n (HT20), 802.11ac (VHT20): Channel Frequency Channel Frequency 149 5745MHz 161 5805MHz 153 5765MHz 165 5825MHz 157 5785MHz 2 channels are provided for 802.11n (HT40), 802.11ac (VHT40): Channel Frequency Channel Frequency 151 5755MHz 159 5795MHz 1 channel is provided for 802.11ac (VHT80): Channel Frequency 155 5775MHz Report No.: RF190715C12-2 Page No. 8 / 24 Report Format Version: 6.1.1

3.2.1 Test Mode Applicability and Tested Channel Detail EUT Configure Applicable to Description Mode RE1G RE<1G A √ √ Power from adapter 1 B - √ Power from adapter 2 Where RE1G: Radiated Emission above 1GHz & Bandedge RE<1G: Radiated Emission below 1GHz Measurement Note: 1. The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on X-plane. 2. Radiated emission test (below 1GHz) and power line conducted emission test items chosen the worst maximum power. 3. “-”: Means no effect. Radiated Emission Test (Above 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Modulation Configure Mode Freq. Range (MHz) Available Channel Tested Channel Technology Mode 2412-2462 1 to 11 OFDM 802.11n (VHT20) + A 5180-5240 36 to 48 6 + 149 802.11ac (VHT20) OFDM 5745-5825 149 to 165 Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Modulation Configure Mode Freq. Range (MHz) Available Channel Tested Channel Technology Mode 2412-2462 1 to 11 OFDM 802.11n (VHT20) + A, B 5180-5240 36 to 48 6 + 149 802.11ac (VHT20) OFDM 5745-5825 149 to 165 Test Condition: Applicable to Environmental Conditions Input Power Tested by RE1G 25 deg. C, 70% RH 120Vac, 60Hz Noah Chang RE<1G 25 deg. C, 70% RH 120Vac, 60Hz Noah Chang Report No.: RF190715C12-2 Page No. 9 / 24 Report Format Version: 6.1.1

3.3 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Product Brand Model No. Serial No. FCC ID Remarks A. Notebook DELL E5410 1HC2XM1 FCC DoC Approved - Note: 1. All power cords of the above support units are non-shielded (1.8m). 2. Item A acted as a communication partner to transfer data. Shielding ID Descriptions Qty. Length (m) Cores (Qty.) Remarks (Yes/No) 1. RJ45, Cat5e 1 6 N 0 - 3.3.1 Configuration of System under Test EUT Adapter (EUT) (1) Remote site Notebook (A) 3.4 General Description of Applied Standards The EUT is a RF Product. According to the specification of the EUT declared by the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.247) FCC Part 15, Subpart E (15.407) ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. Report No.: RF190715C12-2 Page No. 10 / 24 Report Format Version: 6.1.1

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 30dB below the highest level of the desired power. Frequencies (MHz) Field Strength (microvolts/meter) Measurement Distance (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Limits of unwanted emission out of the restricted bands Applicable To Limit 789033 D02 General UNII Test Procedure Field Strength at 3m New Rules v02r01 PK: 74 (dBµV/m) AV: 54 (dBµV/m) Equivalent Field Strength at Frequency Band Applicable To EIRP Limit 3m 5150~5250 MHz 15.407(b)(1) 5250~5350 MHz 15.407(b)(2) PK: -27 (dBm/MHz) PK: 68.2(dBµV/m) 5470~5725 MHz 15.407(b)(3) PK: -27 (dBm/MHz) *1 PK: 68.2 (dBµV/m) *1 *2 PK: 10 (dBm/MHz) PK: 105.2 (dBµV/m) *2 15.407(b)(4)(i) *3 5725~5850 MHz PK: 15.6 (dBm/MHz) PK: 110.8 (dBµV/m) *3 *4 PK: 27 (dBm/MHz) PK: 122.2 (dBµV/m) *4 15.407(b)(4)(ii) Emission limits in section 15.247(d) *2 *1 below the band edge increasing linearly to 10 beyond 75 MHz or more above of the band edge. dBm/MHz at 25 MHz above. *3 below the band edge increasing linearly to a level *4 from 5 MHz above or below the band edge of 15.6 dBm/MHz at 5 MHz above. increasing linearly to a level of 27 dBm/MHz at the band edge. Note: The following formula is used to convert the equipment isotropic radiated power (eirp) to field strength: 1000000 30 P E= µV/m, where P is the eirp (Watts). 3 Report No.: RF190715C12-2 Page No. 11 / 24 Report Format Version: 6.1.1

4.1.2 Test Instruments Description & Model No. Serial No. Cal. Date Cal. Due Manufacturer Test Receiver ESCI 100424 Jan. 03, 2019 Jan. 02, 2020 ROHDE & SCHWARZ Spectrum Analyzer FSP40 100040 Sep. 25, 2018 Sep. 24, 2019 ROHDE & SCHWARZ BILOG Antenna VULB9168 9168-155 Nov. 21, 2018 Nov. 20, 2019 SCHWARZBECK HORN Antenna BBHA 9120D 9120D-408 Nov. 25, 2018 Nov. 24, 2019 SCHWARZBECK HORN Antenna BBHA 9170 BBHA9170241 Nov. 25, 2018 Nov. 24, 2019 SCHWARZBECK Loop Antenna HLA 6121 45745 Jul. 01, 2019 Jun. 30, 2020 TESEQ Preamplifier Agilent 8447D 2944A10631 Aug. 08, 2018 Aug. 07, 2019 (Below 1GHz) Preamplifier KEYSIGHT 83017A MY53270295 Jun. 11, 2019 Jun. 10, 2020 (Above 1GHz) RF signal cable 8D-FB Cable-CH4-01 Aug. 29, 2018 Aug. 28, 2019 WOKEN RF signal cable SUCOFLEX 104 MY 13380+295012/04 Aug. 08, 2018 Aug. 07, 2019 HUBER+SUHNER RF signal cable Cable-CH4-03 SUCOFLEX 104 Aug. 08, 2018 Aug. 07, 2019 HUBER+SUHNER (250724) Software ADT_Radiated_ NA NA NA BV ADT V7.6.15.9.5 Antenna Tower MA 4000 010303 NA NA inn-co GmbH Antenna Tower Controller AT100 AT93021703 NA NA BV ADT Turn Table TT100 TT93021703 NA NA BV ADT Turn Table Controller SC100 SC93021703 NA NA BV ADT Boresight Antenna Fixture FBA-01 FBA-SIP01 NA NA Pre-amplifier (18GHz-40GHz) EMC184045B 980175 Nov. 14, 2018 Nov. 13, 2019 EMC Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Chamber 4. Report No.: RF190715C12-2 Page No. 12 / 24 Report Format Version: 6.1.1

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Parallel, perpendicular, and ground-parallel orientations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is ≥ 1/T (Duty cycle < 98%) or 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz. (2.4GHz: 802.11n (VHT20): RBW = 1MHz, VBW = 300Hz; 5GHz: 802.11ac (VHT20): RBW = 1MHz, VBW = 300Hz) 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF190715C12-2 Page No. 13 / 24 Report Format Version: 6.1.1

4.1.5 Test Setup For Radiated emission below 30MHz 1m EUT& 3m Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable 3m 10m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF190715C12-2 Page No. 14 / 24 Report Format Version: 6.1.1

For Radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions a. Placed the EUT on the testing table. b. Prepared a notebook to act as a communication partner and placed it outside of testing area. c. The communication partner connected with EUT via a RJ45 cable and ran a test program (provided by manufacturer) to enable EUT under transmission condition continuously at specific channel frequency. d. The communication partner sent data to EUT by command "PING". Report No.: RF190715C12-2 Page No. 15 / 24 Report Format Version: 6.1.1

4.1.7 Test Results Above 1GHz data: 802.11n (VHT20), CH 6 + 802.11ac (VHT20), CH 149 Peak (PK) Frequency Range 1GHz ~ 40GHz Detector Function Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2437.00 115.6 PK 3.31 H 309 81.8 33.8 2 *2437.00 105.5 AV 3.31 H 309 71.7 33.8 3 4874.00 48.7 PK 74.0 -25.3 2.55 H 239 37.9 10.8 4 4874.00 36.4 AV 54.0 -17.6 2.55 H 239 25.6 10.8 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2437.00 120.3 PK 2.09 V 244 86.5 33.8 2 *2437.00 110.7 AV 2.09 V 244 76.9 33.8 3 4874.00 48.8 PK 74.0 -25.2 2.99 V 120 38.0 10.8 4 4874.00 37.0 AV 54.0 -17.0 2.99 V 120 26.2 10.8 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF190715C12-2 Page No. 16 / 24 Report Format Version: 6.1.1

Peak (PK) Frequency Range 1GHz ~ 40GHz Detector Function Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 #5635.20 60.1 PK 68.2 -8.1 1.05 H 300 49.5 10.6 2 *5745.00 111.0 PK 1.05 H 300 68.5 42.5 3 *5745.00 100.5 AV 1.05 H 300 58.0 42.5 4 #5979.20 61.3 PK 68.2 -6.9 1.05 H 300 49.5 11.8 5 11490.00 63.3 PK 74.0 -10.7 2.22 H 109 39.2 24.1 6 11490.00 50.0 AV 54.0 -4.0 2.22 H 109 25.9 24.1 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 #5620.00 60.5 PK 68.2 -7.7 2.66 V 180 49.9 10.6 2 *5745.00 119.0 PK 2.66 V 180 76.5 42.5 3 *5745.00 109.2 AV 2.66 V 180 66.7 42.5 4 #5984.00 61.9 PK 68.2 -6.3 2.66 V 180 50.1 11.8 5 11490.00 63.8 PK 74.0 -10.2 1.99 V 133 39.7 24.1 6 11490.00 50.5 AV 54.0 -3.5 1.99 V 133 26.4 24.1 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF190715C12-2 Page No. 17 / 24 Report Format Version: 6.1.1

Below 1GHz data: 802.11n (VHT20), CH 6 + 802.11ac (VHT20), CH 149 Frequency Range 30MHz ~ 1GHz Detector Function Quasi-Peak (QP) Test Mode A ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 55.13 20.3 QP 40.0 -19.7 1.00 H 106 29.5 -9.2 2 163.79 25.6 QP 43.5 -17.9 1.49 H 290 34.5 -8.9 3 237.52 24.4 QP 46.0 -21.6 1.00 H 291 34.4 -10.0 4 683.81 31.5 QP 46.0 -14.5 1.49 H 12 32.4 -0.9 5 936.07 35.8 QP 46.0 -10.2 1.49 H 330 31.8 4.0 6 994.28 33.8 QP 54.0 -20.2 1.00 H 263 29.4 4.4 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20dB below the permissible value to be report. Report No.: RF190715C12-2 Page No. 18 / 24 Report Format Version: 6.1.1

Frequency Range 30MHz ~ 1GHz Detector Function Quasi-Peak (QP) Test Mode A ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 59.01 35.8 QP 40.0 -4.2 1.00 V 14 45.5 -9.7 2 156.03 26.4 QP 43.5 -17.1 1.00 V 90 35.1 -8.7 3 400.52 23.0 QP 46.0 -23.0 1.50 V 77 29.6 -6.6 4 747.85 32.3 QP 46.0 -13.7 1.00 V 348 31.4 0.9 5 852.63 30.5 QP 46.0 -15.5 1.50 V 19 27.9 2.6 6 932.19 36.9 QP 46.0 -9.1 1.50 V 10 32.9 4.0 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20dB below the permissible value to be report. Report No.: RF190715C12-2 Page No. 19 / 24 Report Format Version: 6.1.1

Frequency Range 30MHz ~ 1GHz Detector Function Quasi-Peak (QP) Test Mode B ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 68.71 22.8 QP 40.0 -17.2 1.01 H 48 34.0 -11.2 2 121.10 24.4 QP 43.5 -19.1 1.49 H 230 35.4 -11.0 3 480.07 28.1 QP 46.0 -17.9 1.49 H 119 33.5 -5.4 4 699.34 30.0 QP 46.0 -16.0 1.49 H 184 30.6 -0.6 5 932.19 34.4 QP 46.0 -11.6 1.49 H 10 30.4 4.0 6 960.29 38.6 QP 54.0 -15.4 1.50 H 149 34.1 4.5 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20dB below the permissible value to be report. Report No.: RF190715C12-2 Page No. 20 / 24 Report Format Version: 6.1.1

Frequency Range 30MHz ~ 1GHz Detector Function Quasi-Peak (QP) Test Mode B ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 47.39 36.0 QP 40.0 -4.0 1.01 V 19 45.0 -9.0 2 103.64 26.3 QP 43.5 -17.2 1.00 V 203 39.0 -12.7 3 163.79 21.6 QP 43.5 -21.9 1.00 V 249 30.5 -8.9 4 503.36 23.8 QP 46.0 -22.2 1.00 V 9 28.7 -4.9 5 792.48 30.2 QP 46.0 -15.8 1.00 V 139 28.5 1.7 6 936.07 34.6 QP 46.0 -11.4 1.00 V 142 30.6 4.0 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20dB below the permissible value to be report. Report No.: RF190715C12-2 Page No. 21 / 24 Report Format Version: 6.1.1

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF190715C12-2 Page No. 22 / 24 Report Format Version: 6.1.1

Annex A- Radiated Out of Band Emission (OOBE) Measurement (For U-NII-3 band) 802.11n (VHT20), CH 6 + 802.11ac (VHT20), CH 149 Horizontal Vertical Report No.: RF190715C12-2 Page No. 23 / 24 Report Format Version: 6.1.1

Appendix – Information of the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF190715C12-2 Page No. 24 / 24 Report Format Version: 6.1.1


Document Created: 2019-08-02 12:52:24
Document Modified: 2019-08-02 12:52:24
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC