RF Exposure Info (MPE)

FCC ID: PY319200445

RF Exposure Info

Download: PDF
FCCID_4398812

RF Exposure Report Report No.: SA190725E05 FCC ID: PY319200445 Test Model: RAX20 Series Model: RAX15 Received Date: July 25, 2019 Test Date: July 29 to Aug. 06, 2019 Issued Date: Aug. 12, 2019 Applicant: NETGEAR, Inc. Address: 350 East Plumeria Drive San Jose, CA 95134 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. FCC Registration / 723255 / TW2022 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA190725E05 Page No. 1 / 6 Report Format Version: 6.1.1 Reference No.: 190725E05

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Antenna Gain ...................................................................................................................................... 5 2.5 Calculation Result of Maximum Conducted Power ............................................................................. 6 Report No.: SA190725E05 Page No. 2 / 6 Report Format Version: 6.1.1 Reference No.: 190725E05

Release Control Record Issue No. Description Date Issued SA190725E05 Original release. Aug. 12, 2019 Report No.: SA190725E05 Page No. 3 / 6 Report Format Version: 6.1.1 Reference No.: 190725E05

1 Certificate of Conformity Product: AX1800 Wi-Fi Router Brand: NETGEAR Test Model: RAX20 Series Model: RAX15 Sample Status: ENGINEERING SAMPLE Applicant: NETGEAR, Inc. Test Date: July 29 to Aug. 06, 2019 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.1-1992 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Aug. 12, 2019 Phoenix Huang / Specialist Approved by : , Date: Aug. 12, 2019 May Chen / Manager Report No.: SA190725E05 Page No. 4 / 6 Report Format Version: 6.1.1 Reference No.: 190725E05

2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time (MHz) Strength (V/m) Strength (A/m) (mW/cm2) (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f2)* 30 30-300 27.5 0.073 0.2 30 300-1500 … … f/1500 30 1500-100,000 … … 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 25 cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 Antenna Gain Antenna Transmitter Antenna Net Frequency Range Connector Cable Length Antenna Type No. Circuit Gain (dBi) (GHz) Type (mm) 2.36 2.4~2.4835 3.38 5.15~5.25 1 Chain 0 2.94 5.25~5.35 Dipole i-pex(MHF) 140 2.25 5.47~5.725 2.12 5.725~5.85 1.86 2.4~2.4835 3.39 5.15~5.25 2 Chain 1 2.8 5.25~5.35 Dipole i-pex(MHF) 210 1.83 5.47~5.725 1.65 5.725~5.85 Report No.: SA190725E05 Page No. 5 / 6 Report Format Version: 6.1.1 Reference No.: 190725E05

2.5 Calculation Result of Maximum Conducted Power Evaluation Operation Max Power Antenna Gain Distance Power Density Limit Frequency Mode (mW) (dBi) (cm) (mW/cm2) (mW/cm2) (MHz) WLAN 2462 980.128 5.12 25 0.40569 1 (2.4GHz) WLAN 5240 867.058 6.4 25 0.48190 1 (U-NII-1) WLAN 5745 931.038 4.9 25 0.36633 1 (U-NII-3) Note: 1. Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. 2. 2.4GHz: The directional gain = 10 log[(10G0/20 + 10G1/20)2 / 2] = 5.12dBi 5GHz: U-NII-1: The directional gain = 10 log[(10G0/20 + 10G1/20)2 / 2] = 6.4dBi U-NII-3: The directional gain = 10 log[(10G0/20 + 10G1/20)2 / 2] = 4.9dBi Conclusion: The formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1 CPD = Calculation power density LPD = Limit of power density WLAN 2.4GHz + WLAN 5GHz = 0.40569 / 1 + 0.48190 / 1 = 0.88759 Therefore the maximum calculations of above situations are less than the “1” limit. --- END --- Report No.: SA190725E05 Page No. 6 / 6 Report Format Version: 6.1.1 Reference No.: 190725E05


Document Created: 2019-08-12 10:25:51
Document Modified: 2019-08-12 10:25:51
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC