RF Exposure Info (MPE) rev

FCC ID: PY319200443

RF Exposure Info

Download: PDF
FCCID_4365154

RF Exposure Report Report No.: SA190430E07 R1 FCC ID: PY319200443 Test Model: MC327 Series Model: MC327BL, MC327WL, MC327HW, MC327LW Received Date: Apr. 30, 2019 Test Date: May 10 to Jun. 18, 2019 Issued Date: Jul. 17, 2019 Applicant: NETGEAR, Inc. Address: 350 East Plumeria Drive, San Jose, CA 95134, USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. Test Location (1): No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) FCC Registration / Designation Number: 198487 / TW2021 Test Location (2): E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA190430E07 R1 Page No. 1 / 6 Report Format Version: 6.1.1 Cancels and replaces the report no.: SA190430E07 dated Jun. 20, 2019

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits For Maximum Permissible Exposure (MPE)............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Calculation Result Of Maximum Conducted Power ............................................................................ 6 Report No.: SA190430E07 R1 Page No. 2 / 6 Report Format Version: 6.1.1 Cancels and replaces the report no.: SA190430E07 dated Jun. 20, 2019

Release Control Record Issue No. Description Date Issued SA190430E07 Original release. Jun. 20, 2019 SA190430E07 R1 Addition of Model No. MC327. Jul. 17, 2019 Report No.: SA190430E07 R1 Page No. 3 / 6 Report Format Version: 6.1.1 Cancels and replaces the report no.: SA190430E07 dated Jun. 20, 2019

1 Certificate of Conformity Product: Meural Canvas Brand: NETGEAR Test Model: MC327 Series Model: MC327BL, MC327WL, MC327HW, MC327LW Sample Status: Engineering sample Applicant: NETGEAR, Inc. Test Date: May 10 to Jun. 18, 2019 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Jul. 17, 2019 Annie Chang / Senior Specialist Approved by : , Date: Jul. 17, 2019 Rex Lai / Associate Technical Manager Report No.: SA190430E07 R1 Page No. 4 / 6 Report Format Version: 6.1.1 Cancels and replaces the report no.: SA190430E07 dated Jun. 20, 2019

2 RF Exposure 2.1 Limits For Maximum Permissible Exposure (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time (MHz) Strength (V/m) Strength (A/m) (mW/cm2) (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 2 1.34-30 824/f 2.19/f (180/f )* 30 30-300 27.5 0.073 0.2 30 300-1500 … … f/1500 30 1500-100,000 … … 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA190430E07 R1 Page No. 5 / 6 Report Format Version: 6.1.1 Cancels and replaces the report no.: SA190430E07 dated Jun. 20, 2019

2.4 Calculation Result Of Maximum Conducted Power Frequency Max Power Antenna Gain Distance Power Density Limit Band (dBm) (dBi) (cm) (mW/cm2) (mW/cm2) (MHz) 2412-2462 25.67 2.7 20 0.1367 1 5180-5240 23.82 3.77 20 0.1142 1 5745-5825 23.62 3.81 20 0.1101 1 Note: Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. --- END --- Report No.: SA190430E07 R1 Page No. 6 / 6 Report Format Version: 6.1.1 Cancels and replaces the report no.: SA190430E07 dated Jun. 20, 2019


Document Created: 2019-07-22 05:32:15
Document Modified: 2019-07-22 05:32:15
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC