PD report summary

FCC ID: PY319100441

RF Exposure Info

Download: PDF
FCCID_4280517

Qualcomm Technologies, Inc. Netgear 5G MHS Travel Router (FCC ID: PY319100441) RF Exposure Compliance Test Report Compliance summary 80-W5669-3 Rev. B May 14, 2019 All Qualcomm products mentioned herein are products of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. Other product and brand names may be trademarks or registered trademarks of their respective owners. This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited. Qualcomm Technologies, Inc. 5775 Morehouse Drive San Diego, CA 92121 U.S.A. © 2019 Qualcomm Technologies, Inc. and/or its subsidiaries. All rights reserved.

Revision history Revision Date Description A May 06, 2019 Initial release B May 14, 2019 Correction in SAR tables 80-W5669-3 Rev. B MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 2

Contents 1 Strategy for Compliance Demonstration ............................................................................. 4 2 Overview of Qualcomm Smart Transmit ............................................................................. 5 2.1 Algorithm description .................................................................................................................................5 2.2 Basic concept of the algorithm ...................................................................................................................6 2.3 Configurable parameters ...........................................................................................................................7 3 Description of Equipment Under Test ................................................................................. 8 4 Compliance Summary .......................................................................................................... 9 Figures Figure 2-1 Transmit at high power when needed and permitted ....................................................................................6 Figure 2-2 Transmit with reserve power to support continuous transmission at a minimum power level (Preserve) .........7 Tables Table 4-1: Reported RF exposure level .........................................................................................................................9 80-W5669-3 Rev. B MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 3

1 Strategy for Compliance Demonstration The FCC RF exposure limits, i.e., SAR limit and Power Density (PD) limit, are defined based on time-averaged RF exposure. Therefore, to demonstrate the compliance, the maximum time- averaged exposure needs to be below the corresponding limits. The equipment under test (EUT) is Netgear 5G MHS Travel Router (FCC ID: PY319100441), it contains: 1. Qualcomm® SM8150 modem supporting 2G/3G/4G WWAN technologies 2. Qualcomm SDX50 modem supporting 5G mmW NR 39GHz band. 3. WLAN Both of Qualcomm SM8150 and SDX50 modems are enabled with Qualcomm Smart Transmit feature. This feature performs time averaging algorithm in real time to control and manage transmitting power and ensure the time-averaged RF exposure is in compliance with FCC requirements all the time. The Section 2 provides the overview of Qualcomm Smart Transmit. The WLAN is not enabled with Smart Transmit. Demonstrating compliance of Netgear 5G MHS Travel Router (FCC ID: PY319100441) with Qualcomm Smart Transmit feature is completed in three parts: 0. RF Exposure Compliance Test Report Part 0: SAR Characterization and PD Characterization The SAR and PD Characterization determines the input power limit after accounting for device design related uncertainties, which corresponds to FCC SAR or PD limit, per each radio configuration and RF exposure usage scenario. The determined input power limits will be loaded and stored in a wireless device via the Embedded File System (EFS), and then used as inputs for Smart Transmit to operate. For Netgear 5G MHS Travel Router (FCC ID: PY319100441), SAR characterization is based on SAR measurement and PD characterization is based on simulation in combination with measurement as validation. The input power limit, denoted as Plimit for sub-6 radio, input.power.limit for mmW NR, represents the maximum time-averaged power level for the corresponding radio/antenna configuration. The SAR and PD characterization of Netgear 5G MHS Travel Router (FCC ID: PY319100441) is reported in the Part 0 report 1. RF Exposure Compliance Test Report Part 1: Test in Static Transmission Scenario The purpose of Part 1 test is to demonstrate that the EUT meets FCC SAR and PD limits when transmitting in static transmission scenario at maximum allowable time-averaged power levels (i.e., Plimit for sub-6 radio, and input.power.limit for mmW NR), or maximum RF tune-up power levels if they are lower than maximum allowable time-averaged power levels. The compliance under static transmission condition is demonstrated via this Part 1 report, which includes Bureau Veritas Report No. SA181015C09: FCC SAR Test Report. 80-W5669-3 Rev. B MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 4

Netgear 5G MHS Travel Router (FCC ID: PY319100441) RF Exposure Compliance Test Report Compliance summary Overview of Qualcomm Smart Transmit The RF exposure assessment for simultaneous transmission scenarios the EUT supports is also conducted in Part 1 report. 2. RF Exposure Compliance Test Report Part 2: Test in Dynamic Transmission Scenario The purpose of this Part 2 report is to demonstrate the EUT complies with FCC RF exposure requirement under Tx varying transmission scenarios, thereby validity of Qualcomm Smart Transmit feature for FCC equipment authorization of Netgear 5G MHS Travel Router (FCC ID: PY319100441). 2 Overview of Qualcomm Smart Transmit 2.1 Algorithm description The FCC RF exposure limit is defined based on time-averaged RF exposure. When running in a wireless device, Qualcomm Smart Transmit algorithm enables more elegant power control mechanisms for RF exposure management. It ensures at all times the wireless device is in compliance with the FCC limit of RF exposure time-averaged over a defined time window, denoted as TSAR and TPD for specific absorption rate (SAR for transmit frequency < 6 GHz) and power density (PD for transmit frequency > 6 GHz) time windows, respectively. The Smart Transmit algorithm not only ensures the wireless device complies with RF exposure requirement, but also improves the user experience and network performance. For a given wireless device, RF exposure is proportional to the transmitting power. ■ Once the SAR and PD of the wireless device is characterized at a transmit power level, RF exposure at a different power level for the characterized configurations can be scaled by the change in the corresponding power level. ■ Therefore, for a characterized device, RF exposure compliance can be achieved through transmit power control and management. The Smart Transmit algorithm embedded in Qualcomm® Modems reliably controls the transmit power of the wireless device in real time to maintain the time-averaged transmit power, in turn, time-averaged RF exposure, below the predefined time-averaged power limit for each characterized technology and band. ■ This predefined time-averaged power limit is denoted as Plimit corresponding to SAR_design_target (< FCC SAR limit, SARlimit, for frequency < 6 GHz) and input.power.limit corresponding PD_design_target (<FCC PD limit, PDlimit, for frequency > 6 GHz) in this RF exposure report package. ■ This predefined time-averaged power limit is derived and determined in Part 0 report. ■ The wireless device continuously transmitting at Plimit level or input.power.limit level complies with the FCC RF exposure requirement. In a simultaneous transmission scenario, the algorithm manages all active transmitters and make sure the total exposure ratio from each transmitter does not exceed 1. 80-W5669-3 Rev. B MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 5

Netgear 5G MHS Travel Router (FCC ID: PY319100441) RF Exposure Compliance Test Report Compliance summary Overview of Qualcomm Smart Transmit 2.2 Basic concept of the algorithm The Smart Transmit algorithm controls and manages the instantaneous transmit power (Tx) to maintain the time-averaged Tx power (in turn, time-averaged RF exposure) in compliance with FCC limits. ■ If time-averaged transmit power approaches the Plimit, then the modem needs to limit instantaneous transmit power to ensure the time-averaged transmit power does not exceed the Plimit or input.power.limit in any TSAR and TPD time windows (i.e., the time-averaged RF exposure complies with the FCC RF exposure limit in any TSAR or TPD time window). ■ The wireless device can instantaneously transmit at high transmit powers and exceed the Plimit or input.power.limit level for a short duration before limiting the power to maintain the time- averaged transmit power under Plimit or input.power.limit. ■ If the wireless device transmits at high power for a long time, then the radio link needs to be dropped to be compliant with time-averaged Tx power requirement (see Figure 2-1). ■ To avoid dropping the radio link, Smart Transmit algorithm starts the power limiting enforcement earlier in time to back off the Tx power to a reserve level (denoted as Preserve), so the wireless device can maintain the radio link at a minimum reserve power level for as long as needed, and at the same time ensure the time-averaged Tx power over any defined time window is less than Plimit at all times (see Figure 2-2). At all times, Smart Transmit meets the below equation: 1 𝑡 𝑡𝑖𝑚𝑒. 𝑎𝑣𝑔. 𝑇𝑥 𝑝𝑜𝑤𝑒𝑟 = ∫ 𝑇𝑆𝐴𝑅 𝑡−𝑇𝑆𝐴𝑅 𝑖𝑛𝑠𝑡. 𝑇𝑥 𝑝𝑜𝑤𝑒𝑟(𝑡) 𝑑𝑡 ≤ 𝑃𝑙𝑖𝑚𝑖𝑡 where, 𝑡𝑖𝑚𝑒. 𝑎𝑣𝑔. 𝑇𝑥 𝑝𝑜𝑤𝑒𝑟 is the transmit power averaged between t-TSAR and t time period; TSAR is the time window defined by FCC for time-averaging RF exposure; inst. Tx power (t) is the instantaneous transmit power at t time instant; 𝑃𝑙𝑖𝑚𝑖𝑡 is the predefined time-averaged power limit. Figure 2-1 Transmit at high power when needed and permitted 80-W5669-3 Rev. B MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 6

Netgear 5G MHS Travel Router (FCC ID: PY319100441) RF Exposure Compliance Test Report Compliance summary Overview of Qualcomm Smart Transmit Figure 2-2 Transmit with reserve power to support continuous transmission at a minimum power level (Preserve) ■ In the case of simultaneous transmission, Smart Transmit manages all active transmitters and make sure the total exposure ratio is less than 1, i.e., 1 𝑡 1 𝑡 2 𝑇𝑆𝐴𝑅 ∫𝑡−𝑇𝑆𝐴𝑅 𝑆𝐴𝑅(𝑡) 𝑑𝑡 𝑇𝑃𝐷 ∫𝑡−𝑇𝑃𝐷 4𝑐𝑚 𝑃𝐷(𝑡) 𝑑𝑡 ∑ +∑ ≤1 𝐹𝐶𝐶 𝑆𝐴𝑅 𝑙𝑖𝑚𝑖𝑡 𝐹𝐶𝐶 𝑃𝐷 𝑙𝑖𝑚𝑖𝑡 2.3 Configurable parameters The following input parameters are required for functionality of Qualcomm Smart Transmit algorithm. These parameters cannot be accessed by the end user, because at the factory they are entered through the embedded file system (EFS) entries by the OEM Regulatory body The regulatory body entry should be filled out with either 0 or “1” to correspond to the FCC or ICNIRP requirement, so that Smart Transmit algorithm can select the appropriate averaging time windows. For FCC, Smart Transmit uses 100 seconds averaging window for transmit frequencies f<3GHz, 60 seconds for 3GHz < f < 6GHz, and 4 seconds for 24GHz < f < 42GHz. ■ Tx_power_at_SAR_design_target (Plimit in dBm) for Tx transmitting frequency < 6GHz The maximum time-averaged transmit power, in dBm, at which this radio configuration (i.e., band and technology) reaches the SAR_design_target. This SAR_design_target is pre- determined for the specific device and it shall be less than regulatory SAR limit after accounting for all design related tolerances. The time-averaged SAR is assessed against this SAR_design_target in real time to determine the compliance. The Plimit could vary with technology, band and DSI (device state index), therefore it has the unique value for each technology, band and DSI. ■ Reserve_power_margin (dB) The margin, in dB, below the Plimit to reserve for future transmission with a minimum transmit power (Preserve): Preserve (dBm) = Plimit (dBm) – Reserve_power_margin (dB) When the Reserve_power_margin is set to zero dB, Smart Transmit effectively limits the upper bound of wireless device transmit power to Plimit, in other words, the wireless device transmits continuously at Plimit, and in this case, Smart Transmit dynamic control feature is not utilized. ■ input.power.limit (dBm) for Tx transmitting frequency ≥ 6GHz The maximum time-averaged power at the input of antenna element port, in dBm, at which each antenna configuration (i.e., each beam) meets the PD_design_target that is less than the regulatory power density limit after accounting for all design related tolerances. 80-W5669-3 Rev. B MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 7

Netgear 5G MHS Travel Router (FCC ID: PY319100441) RF Exposure Compliance Test Report Compliance summary Description of Equipment Under Test 3 Description of Equipment Under Test For description of the EUT, refer to Section 2 of Bureau Veritas Report No. SA181015C09: FCC SAR Test Report, and copied below: 80-W5669-3 Rev. B MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 8

Netgear 5G MHS Travel Router (FCC ID: PY319100441) RF Exposure Compliance Test Report Compliance summary Compliance Summary 4 Compliance Summary In summary, all transmission scenarios that EUT supports comply with FCC time-averaged RF exposure requirement after accounting for total device related uncertainty, as shown in Table 4-1. Table 4-1: Reported RF exposure level Reported RF Notes Exposure Level Bureau Veritas Report No. Highest 1g SAR at Plimit (W/kg) 1.16 SA181015C09: FCC SAR Test Report Qualcomm Document No. 80- W5669-1 Rev.A: Netgear 5G MHS Travel Router (FCC ID: Highest 4cm2-avg PD at input.power.limit (W/m2) 7.43 PY319100441) RF Exposure Compliance Test Report Part 1: Test Under Static Transmission Scenario Bureau Veritas Report No. Highest 1g SAR for simultaneous Tx (4G WWAN 1.28 SA181015C09: FCC SAR + WLAN) Test Report Qualcomm Document No. 80- W5669-1 Rev.A: Netgear 5G MHS Travel Router (FCC ID: Highest Total Exposure Ratio for simultaneous Tx 0.82 PY319100441) FCC Power (LTE+5G mmW NR + WLAN) Density Compliance Test Report, Part 1: Test Under Static Transmission Scenario 80-W5669-3 Rev. B MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 9


Document Created: 2019-05-14 10:43:12
Document Modified: 2019-05-14 10:43:12
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC