RF Exposure Info (MPE)

FCC ID: PY318400434

RF Exposure Info

Download: PDF
FCCID_4326270

RF Exposure Report Report No.: SA190108E06 FCC ID: PY318400434 Test Model: RAX200 Received Date: Jan. 08, 2019 Test Date: May 09 to 10, 2019 Issued Date: June 06, 2019 Applicant: NETGEAR, Inc. Address: 350 East Plumeria Drive San Jose, CA 95134 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. FCC Registration / 723255 / TW2022 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA190108E06 Page No. 1 / 7 Report Format Version: 6.1.1

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits For Maximum Permissible Exposure (MPE) ............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Antenna Gain ...................................................................................................................................... 6 2.5 Calculation Result of Maximum Conducted Power ............................................................................. 7 Report No.: SA190108E06 Page No. 2 / 7 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued SA190108E06 Original release. June 06, 2019 Report No.: SA190108E06 Page No. 3 / 7 Report Format Version: 6.1.1

1 Certificate of Conformity Product: Nighthawk AX12 12-Stream Tri-Band AX WiFi Router Brand: NETGEAR Test Model: RAX200 Sample Status: ENGINEERING SAMPLE Applicant: NETGEAR, Inc. Test Date: May 09 to 10, 2019 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.1-1992 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: June 06, 2019 Wendy Wu / Specialist Approved by : , Date: June 06, 2019 May Chen / Manager Report No.: SA190108E06 Page No. 4 / 7 Report Format Version: 6.1.1

2 RF Exposure 2.1 Limits For Maximum Permissible Exposure (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time 2 (MHz) Strength (V/m) Strength (A/m) (mW/cm ) (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 2 1.34-30 824/f 2.19/f (180/f )* 30 30-300 27.5 0.073 0.2 30 300-1500 … … f/1500 30 1500-100,000 … … 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula 2 Pd = (Pout*G) / (4*pi*r ) where 2 Pd = power density in mW/cm Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 37cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA190108E06 Page No. 5 / 7 Report Format Version: 6.1.1

0 Eooert venitas 24 Antenna Gain Frequency Range Directional Antenna Gain (dBi) Antenna Type Antenna Connector (GHz) 2.4~2.4835 7.01 5.15~5.25 7.15 5.25~5.35 7.37 Dipole ipex(MHEF) 5.47~5.725 7.62 5.725~5.85 7.53 Note: More detailed information, please refer to opearating description. 2 Frequency Range Antenna Net Gain (GHz) (dBi) Antenna Type Connecter Type 2 . 5.15~5.85 (RX only) PCB ipex(MHE) Report No.: $A190108E06 Page No. 6 /7 Report Format Version: 6.1.1

2.1 Calculation Result of Maximum Conducted Power Evaluation Operation Max Power Antenna Gain Distance Power Density Limit Frequency 2 2 Mode (mW) (dBi) (cm) (mW/cm ) (mW/cm ) (MHz) WLAN 2.4GHz 2437 964.63 7.01 37 0.28167 1 WLAN U-NII-1 5230 960.502 7.15 37 0.28966 1 WLAN U-NII-2A 5310 243.628 7.37 37 0.07729 1 WLAN U-NII-2C 5550 247.638 7.62 37 0.08322 1 WLAN U-NII-3 5825 998.049 7.53 37 0.32850 1 NOTE: 2.4GHz: The directional gain = 7.01dBi 5.0GHz: U-NII-1: The directional gain = 7.15dBi U-NII-2A: The directional gain = 7.37dBi U-NII-2C: The directional gain = 7.62dBi U-NII-3: The directional gain = 7.53dBi Conclusion: The formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1 CPD = Calculation power density LPD = Limit of power density WLAN 2.4GHz + WLAN 5GHz (low band) + WLAN 5GHz (high band) = 0.28167 / 1 + 0.28966 / 1 + 0.32850 / 1 = 0.89983 Therefore the maximum calculations of above situations are less than the “1” limit. --- END --- Report No.: SA190108E06 Page No. 7 / 7 Report Format Version: 6.1.1


Document Created: 2019-06-27 21:52:50
Document Modified: 2019-06-27 21:52:50
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC