Attestation (DFS Client Declaration) rev

FCC ID: PY318400434

Attestation Statements

Download: PDF
FCCID_4326246

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408—890—3657/Fax:408—907—8097 DFS client device channel plan and software operational declaration Date: 2019—06—17 We, NETGEAR, INC., declare that the device, FCC ID: PY318400434 Model Name: RAX200, does not have Ad Hoc on "non—US frequencies" and/or on" DFS frequencies". Also, the client software and associated drivers will not initiate any transmission on DFS frequencies without initiation by a master. This includes restriction on transmissions for beacons and support for ad—hoc peer—to—peer modes. Below is the channel / frequency plan for the device: CH 1 2 3 4 3 6 7 8 9 10 11 Frequency (MHz) 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 Scan Type Active |Active |Active |Active |Active |Active |Active |Active |Active |Active |Active CH Frequency (MHz) Scan Type CH 36 38 40 44 46 48 Frequency (MHz) 5180 5190 5200 5220 5230 5240 Scan Type Active |Active |Active Active Active Active CH 52 54 56 60 62 64 Frequency (MHz)| 5260 5270 5280 5300 5310 5320 Active |Active |Active |Active |Active |Active |Active Scan Type Passive |Passive |Passive |Passive |Passive |Passive |Passive CH 100 102 104 108 110 112 116 118 120 Frequency (MHz) 5500 5510 5520 5540 5550 5560 5580 5590 5600 Active |Active |Active |Active |Active |Active |Active |Active |Active |Active |Active Scan Type . . . . . . . . . . . YP Passive |Passive |Passive |Passive |Passive |Passive |Passive |Passive |Passive |Passive |Passive CH 124 126 128 132 134 136 140 Frequency (MHz)| 5620 5630 5640 5660 5670 5680 5700 Active |Active |Active |Active |Active |Active Scan Type . . . . . . YP Passive|Passive |Passive |Passive |Passive |Passive CH 149 151 153 157 159 161 165 Frequency (MHz) 5745 5755 5765 5785 5795 5805 5825 Scan Type Active |Active |Active Active |Active |Active |Active Also, on DFS channels, the WLAN driver in the device operates under the control of an AP at all times, except when in ad—hoc mode on US non—DFS channels. The device passively scans DFS frequencies until a master device is detected. The control of this functionality is not accessible to anyone under any conditions. Furthermore, the firmware is protected by a special signature and CRC checksum. Signature and CRC checksum will be calculated and verified before firmware upgrade. Unauthorized modification to firmware will lead to the failure of verification and thus firmware upgrade will not be allowed.

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 Sincerely yours, ----------------------------------- David Kay / Regulatory Compliance Director Tel: 4088903657 Fax: 4089078097 E-mail: david.kay@netgear.com


Document Created: 2019-06-27 21:55:59
Document Modified: 2019-06-27 21:55:59
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC