User Manual

FCC ID: PY318300428

Users Manual

Download: PDF
FCCID_4079374

Set Up Your Nighthawk 5G LCD Screen Mobile Hotspot FOR Signal Network 1 Insert the battery. SIM card strength POSITION indicator (preinstalled) ONLY Nighthawk® 5G Mobile Hotspot Number of Battery connected devices Wi-Fi network name and Messages password Your wireless device displays a network 2 Install the back cover. indicator to let you know which of AT&T’s The battery is partially charged. When you wireless networks you are connected to. need to recharge it, connect the USB cable to the mobile hotspot and then plug into: 5G+ • A wall socket, using the wall charger (faster RAN charge option) • The USB port on your laptop 4G LTE Let’s Get Started Note: The mobile hotspot comes with a preinstalled SIM card. HSPA+n The SIM must be activated to a data plan with AT&T. Battery charge Get to Know Your Nighthawk 5G Connect to the Internet Mobile Hotspot Turn on your mobile hotspot 1 Press and hold the Power button for 2 seconds. Touch screen Home Note: The screen displays the hotspot’s Wi-Fi network Back name and password. Touch to navigate On your laptop or other wireless device AT&T Eco Rating 2.0 only applies to the NETGEAR Power 2 Open your Wi-Fi/network connection Nighthawk 5G Mobile Hotspot, model M5000. For button manager. limited factors evaluated visit att.com/EcoSpace. 3 Find your mobile hotspot’s Wi-Fi network Wireless Emergency Alerts is a registered Trademark name (ATT-WIFI-XXXX) and connect. and Service Mark of CTIA. 4 Enter your mobile hotspot’s Wi-Fi password. NETGEAR and Nighthawk are trademarks of 5 Launch your Internet browser. NETGEAR, Inc. 5G is a trademark of 3GPP. 5G not Do we need art to show the available everywhere. Contains Lithium ion battery - Note: The screen goes dark to save power. Press and release recycle or dispose of properly. USB port location? the Power button to wake the screen. © 2018 AT&T Intellectual Property. All rights reserved. AT&T, the AT&T logo and all other AT&T marks USB C port contained herein are trademarks of AT&T Intellectual Property. All other marks are the property of their respective owners. DRAFT Printed in USA 201-24043-01

ALL IMAGES ARE LCD Screens WiFi Manager WiFi Settings FOR POSITION ONLY You can use a browser to view and change the Change Wi-Fi network name and password Press the Navigation button to scroll mobile hotspot settings. through the screens. 1 On your Wi-Fi device, type Log In http://attwifimanager in the browser bar. Home screen 2 Log in as administrator. 1 On your Wi-Fi device, type Default login is attadmin. http://attwifimanager in the browser bar. 3 Select Wi-Fi on the menu. 2 Log in as administrator. Default login is attadmin. Account information Wi-Fi details Menu Messages 4 In the Main Wi-Fi section, click Edit. 5 Type your new Wi-Fi network name and password. 6 Change the settings. The Save button displays near the bottom of Device Hide password the page. details Your WiFi password displays on your mobile 6 Click Save. hotspot screen, but you can hide it. More WiFi Options 1 On your Wi-Fi device, type http://attwifimanager in the browser bar. You can change more WiFi settings on the 2 Log in as administrator. Options page. Default login is attadmin. 1 On your Wi-Fi device, type Notification 5 In the Wi-Fi Summary section, under http://attwifimanager in the browser bar. PASSWORD, clear the Display on homescreen 2 Log in as administrator. check box. Default login is attadmin. The Save button displays near the bottom of 3 Select Wi-Fi on the menu. the page. 4 Select Options. 6 Click Save. DRAFT

Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Radiation Exposure Statement: This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and be positioned a minimum of mm from the body. Use of other accessories may not ensure compliance with FCC RF 10cm exposure guidelines. If you do not use a body-worn accessory and are not holding the device at the ear, position the handset a minimum of 10cmmm from your body when the device is switched on. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.


Document Created: 2018-11-20 15:45:03
Document Modified: 2018-11-20 15:45:03
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC