Co-Location Test Report

FCC ID: PY318300422

Test Report

Download: PDF
FCCID_4153055

FCC Test Report (Co-Located) Report No.: RF181023C12A-1 FCC ID: PY318300422 Test Model: EX7300v2 Series Model: EX6400v2 (refer to item 3.1 for more details) Received Date: Oct. 23, 2018 Test Date: Dec. 13, 2018 Issued Date: Jan. 07, 2019 Applicant: NETGEAR, INC. Address: 350 East Plumeria Drive San Jose, CA 95134 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) FCC Registration / 788550 / TW0003 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF181023C12A-1 Page No. 1 / 24 Report Format Version: 6.1.1 Reference No.: 181023C11

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Test Modes ................................................................................................................... 9 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................ 11 3.3 Description of Support Units ............................................................................................................. 12 3.3.1 Configuration of System under Test .................................................................................................. 12 3.4 General Description of Applied Standards ........................................................................................ 12 4 Test Types and Results ...................................................................................................................... 13 4.1 Radiated Emission and Bandedge Measurement............................................................................. 13 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 13 4.1.2 Test Instruments ................................................................................................................................ 14 4.1.3 Test Procedures................................................................................................................................. 15 4.1.4 Deviation from Test Standard ............................................................................................................ 15 4.1.5 Test Setup .......................................................................................................................................... 16 4.1.6 EUT Operating Conditions................................................................................................................. 17 4.1.7 Test Results ....................................................................................................................................... 18 4.2 Conducted Out of Band Emission Measurement .............................................................................. 21 4.2.1 Limits of Conducted Out of Band Emission Measurement................................................................ 21 4.2.2 Test Setup .......................................................................................................................................... 21 4.2.3 Test Instruments ................................................................................................................................ 21 4.2.4 Test Procedure .................................................................................................................................. 21 4.2.5 Deviation from Test Standard ............................................................................................................ 21 4.2.6 EUT Operating Condition .................................................................................................................. 21 4.2.7 Test Results ....................................................................................................................................... 22 5 Pictures of Test Arrangements .......................................................................................................... 23 Appendix – Information on the Testing Laboratories ................................................................................ 24 Report No.: RF181023C12A-1 Page No. 2 / 24 Report Format Version: 6.1.1 Reference No.: 181023C11

Release Control Record Issue No. Description Date Issued RF181023C12A-1 Original release Jan. 07, 2019 Report No.: RF181023C12A-1 Page No. 3 / 24 Report Format Version: 6.1.1 Reference No.: 181023C11

1 Certificate of Conformity Product: Nighthawk X4 AC2200 WiFi Mesh Extender (refer to item 3.1 for more details) Brand: NETGEAR Test Model: EX7300v2 Series Model: EX6400v2 (refer to item 3.1 for more details) Sample Status: Engineering sample Applicant: NETGEAR, INC. Test Date: Dec. 13, 2018 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) 47 CFR FCC Part 15, Subpart E (Section 15.407) ANSI C63.10-2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Jan. 07, 2019 Polly Chien / Specialist Approved by : , Date: Jan. 07, 2019 Bruce Chen / Project Engineer Report No.: RF181023C12A-1 Page No. 4 / 24 Report Format Version: 6.1.1 Reference No.: 181023C11

2 Summary of Test Results Applied 47 CFR FCC Part 15, Subpart C (Section 15.247) Standard: 47 CFR FCC Part 15, Subpart E (Section 15.407) FCC Test Item Result Remarks Clause 15.205 / 15.209 / Meet the requirement of limit. 15.247(d) Radiated Emissions Pass Minimum passing margin is -4.3dB at 15.407(b) 41.57MHz. (1/2/3/4(i/ii)/6) 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Expanded Uncertainty Measurement Frequency (k=2) (±) 30MHz ~ 200MHz 3.63 dB Radiated Emissions up to 1 GHz 200MHz ~1000MHz 3.64 dB 1GHz ~ 18GHz 2.29 dB Radiated Emissions above 1 GHz 18GHz ~ 40GHz 2.29 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF181023C12A-1 Page No. 5 / 24 Report Format Version: 6.1.1 Reference No.: 181023C11

3 General Information 3.1 General Description of EUT Product Nighthawk X4 AC2200 WiFi Mesh Extender (refer to note for more details) Brand NETGEAR Test Model EX7300v2 Series Model EX6400v2 Model Difference Refer to Note Status of EUT Engineering sample Power Supply Rating 100-240Vac CCK, DQPSK, DBPSK for DSSS Modulation Type 256QAM, 64QAM, 16QAM, QPSK, BPSK for OFDM 802.11b:11/5.5/2/1Mbps 802.11a/g: 54/48/36/24/18/12/9/6Mbps Transfer Rate 802.11a: 54/48/36/24/18/12/9/6Mbps 802.11n: up to 600Mbps 802.11ac: 1733.3Mbps 2.4GHz: 2412 ~ 2462MHz Operating Frequency 5.0GHz: 5260 ~ 5320MHz, 5500 ~ 5720MHz 2412 ~ 2462MHz: 802.11b, 802.11g, 802.11n (HT20): 11 802.11n (HT40): 7 5260 ~ 5320MHz: 802.11a, 802.11n (HT20), 802.11ac (VHT20): 4 Number of Channel 802.11n (HT40), 802.11ac (VHT40): 2 802.11ac (VHT80): 1 5500 ~ 5720MHz: 802.11a, 802.11n (HT20), 802.11ac (VHT20): 12 802.11n (HT40), 802.11ac (VHT40): 6 802.11ac (VHT80): 3 Model: EX7300v2: CDD Mode: 2412 ~ 2462MHz: 415.816mW Model: EX6400v2: CDD Mode: 2412 ~ 2462MHz: 307.423mW Output Power Model: EX7300v2/ EX6400v2 5260 ~ 5320MHz: 231.217mW 5500 ~ 5720MHz: 215.895mW Beamforming Mode: 5260 ~ 5320MHz: 231.217mW 5500 ~ 5720MHz: 215.895mW Report No.: RF181023C12A-1 Page No. 6 / 24 Report Format Version: 6.1.1 Reference No.: 181023C11

Antenna Type Refer to note Antenna Connector Refer to note Accessory Device NA Cable Supplied NA Note: 1. This report is prepared for FCC class II permissive change. The differences compared with the original report (BV CPS report no.: RF181023C12-2) are adding 5.26GHz to 5.32GHz and 5.50GHz to 5.72GHz by software. 2. All models are listed as below. Brand Product Name Model Difference The listed models are electrically and mechanically Nighthawk X4 AC2200 EX7300v2 identical. The intention of these models is only for RF WiFi Mesh Extender output transmit antenna (EX7300v2 2.4G: 4T4R; NETGEAR EX6400v2 2.4G: 3T3R) and different NETGEAR logo AC1900 WiFi Mesh EX6400v2 (EX7300v2 has silver coating. EX6400v2 has no Extender silver coating) purpose. * For above two model are presented in power output test item. For other test items, model EX7300v2 is the worst case for final tests after pretesting. 3. The EUT incorporates a MIMO function. Physically, the EUT provides 4 completed transmitters and 4 receivers. Band Modulation Mode TX Function Beamforming Model 802.11b 4TX Not Support 802.11g 4TX Not Support 2.4GHz 802.11n (HT20) 4TX Not Support 802.11n (HT40) 4TX Not Support 802.11a 4TX Not Support EX7300v2 802.11n (HT20) 4TX Support 802.11n (HT40) 4TX Support 5GHz 802.11ac (VHT20) 4TX Support 802.11ac (VHT40) 4TX Support 802.11ac (VHT80) 4TX Support 802.11b 3TX Not Support 802.11g 3TX Not Support 2.4GHz EX6400v2 802.11n (HT20) 3TX Not Support 802.11n (HT40) 3TX Not Support * The modulation and bandwidth are similar for 802.11n mode for 20MHz/40MHz and 802.11ac mode for 20MHz/40MHz, therefore investigated worst case to representative mode in test report. (Final test mode refer section 3.2.1) Report No.: RF181023C12A-1 Page No. 7 / 24 Report Format Version: 6.1.1 Reference No.: 181023C11

4. The EUT uses following antennas. For 2.4GHz Band Model: EX6400v2 Ant. Type PIFA Connecter Type NA Directional Antenna Gain (dBi) 6.07 Model: EX7300v2 Ant. Type PIFA Connecter Type NA Directional Antenna Gain (dBi) 7.60 For 5GHz Band Model: EX6400v2 & EX7300v2 Ant. Type PIFA Connecter Type NA Frequency Directional Gain (dBi) 5150~5250MHz 5.49 5250~5350MHz 5.48 5470~5725MHz 5.11 5725~5850MHz 5.14 Report No.: RF181023C12A-1 Page No. 8 / 24 Report Format Version: 6.1.1 Reference No.: 181023C11

3.2 Description of Test Modes For 2.4GHz 11 channels are provided for 802.11b, 802.11g and 802.11n (HT20): Channel Frequency Channel Frequency 1 2412MHz 7 2442MHz 2 2417MHz 8 2447MHz 3 2422MHz 9 2452MHz 4 2427MHz 10 2457MHz 5 2432MHz 11 2462MHz 6 2437MHz 7 channels are provided for 802.11n (HT40): Channel Frequency Channel Frequency 3 2422MHz 7 2442MHz 4 2427MHz 8 2447MHz 5 2432MHz 9 2452MHz 6 2437MHz For 5260 ~ 5320MHz: 4 channels are provided for 802.11a, 802.11n (HT20): Channel Frequency Channel Frequency 52 5260 MHz 60 5300 MHz 56 5280 MHz 64 5320 MHz 2 channels are provided for 802.11n (HT40): Channel Frequency Channel Frequency 54 5270 MHz 62 5310 MHz 1 channel is provided for 802.11ac (VHT80): Channel Frequency 58 5290MHz Report No.: RF181023C12A-1 Page No. 9 / 24 Report Format Version: 6.1.1 Reference No.: 181023C11

For 5500 ~ 5720MHz: 12 channels are provided for 802.11a, 802.11n (HT20), 802.11ac (VHT20): Channel Frequency Channel Frequency 100 5500 MHz 124 5620 MHz 104 5520 MHz 128 5640 MHz 108 5540 MHz 132 5660 MHz 112 5560 MHz 136 5680 MHz 116 5580 MHz 140 5700 MHz 120 5600 MHz 144 5720 MHz 6 channels are provided for 802.11n (HT40), 802.11ac (VHT40): Channel Frequency Channel Frequency 102 5510 MHz 126 5630 MHz 110 5550 MHz 134 5670 MHz 118 5590 MHz 142 5710 MHz 3 channels are provided for 802.11ac (VHT80): Channel Frequency Channel Frequency 106 5530 MHz 122 5610 MHz 138 5690 MHz Report No.: RF181023C12A-1 Page No. 10 / 24 Report Format Version: 6.1.1 Reference No.: 181023C11

3.2.1 Test Mode Applicability and Tested Channel Detail EUT Configure Applicable to Description Mode RE1G RE<1G OB - √ √ √ - RE1G: Radiated Emission above 1GHz & Bandedge Where RE<1G: Radiated Emission below 1GHz Measurement OB: Conducted Out-Band Emission Measurement Note: The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on Z-plane. Radiated Emission Test (Above 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Modulation Configure Mode Freq. Range (MHz) Available Channel Tested Channel Technology Mode 2412 ~ 2462 1 to 11 OFDM 802.11g + - 5260 ~ 5320 52 to 64 6 + 52 OFDM 802.11a 5500 ~ 5720 100 to 144 OFDM Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Modulation Configure Mode Freq. Range (MHz) Available Channel Tested Channel Technology Mode 2412 ~ 2462 1 to 11 OFDM 802.11g + - 5260 ~ 5320 52 to 64 6 + 52 OFDM 802.11a 5500 ~ 5720 100 to 144 OFDM Conducted Out-Band Emission Measurement Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Modulation Configure Mode Freq. Range (MHz) Available Channel Tested Channel Technology Mode 2412 ~ 2462 1 to 11 OFDM 802.11g + - 5260 ~ 5320 52 to 64 6 + 52 OFDM 802.11a 5500 ~ 5720 100 to 144 OFDM Report No.: RF181023C12A-1 Page No. 11 / 24 Report Format Version: 6.1.1 Reference No.: 181023C11

Test Condition: Applicable to Environmental Conditions Input Power Tested by RE1G 25deg. C, 70%RH 120Vac, 60Hz Luis Lee RE<1G 25deg. C, 70%RH 120Vac, 60Hz Luis Lee OB 25deg. C, 75%RH 120Vac, 60Hz Noah Chang 3.3 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Product Brand Model No. Serial No. FCC ID Remarks A. Notebook DELL E5410 1HC2XM1 FCC DoC Approved - Note: 1. All power cords of the above support units are non-shielded (1.8m). 2. Item A acted as a communication partner to transfer data. Shielding ID Descriptions Qty. Length (m) Cores (Qty.) Remarks (Yes/No) 1. RJ45, Cat5e 1 6 N 0 - 3.3.1 Configuration of System under Test EUT (1) Remote site Notebook (A) 3.4 General Description of Applied Standards The EUT is a RF Product. According to the specification of the EUT declared by the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.247) FCC Part 15, Subpart E (15.407) ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. Report No.: RF181023C12A-1 Page No. 12 / 24 Report Format Version: 6.1.1 Reference No.: 181023C11

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 30dB below the highest level of the desired power: Frequencies (MHz) Field Strength (microvolts/meter) Measurement Distance (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 Note: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Limits of unwanted emission out of the restricted bands Applicable To Limit 789033 D02 General UNII Test Procedure Field Strength at 3m New Rules v02r01 PK: 74 (dBµV/m) AV: 54 (dBµV/m) Equivalent Field Strength at Frequency Band Applicable To EIRP Limit 3m 5150~5250 MHz 15.407(b)(1) 5250~5350 MHz 15.407(b)(2) PK: -27 (dBm/MHz) PK: 68.2(dBµV/m) 5470~5725 MHz 15.407(b)(3) PK: -27 (dBm/MHz) *1 PK: 68.2(dBµV/m) *1 *2 PK: 10 (dBm/MHz) PK: 105.2 (dBµV/m) *2 15.407(b)(4)(i) *3 5725~5850 MHz PK: 15.6 (dBm/MHz) PK: 110.8(dBµV/m) *3 *4 PK: 27 (dBm/MHz) PK: 122.2 (dBµV/m) *4 15.407(b)(4)(ii) Emission limits in section 15.247(d) *2 *1 below the band edge increasing linearly to 10 beyond 75 MHz or more above of the band edge. dBm/MHz at 25 MHz above. *3 below the band edge increasing linearly to a level *4 from 5 MHz above or below the band edge of 15.6 dBm/MHz at 5 MHz above. increasing linearly to a level of 27 dBm/MHz at the band edge. Note: The following formula is used to convert the equipment isotropic radiated power (eirp) to field strength: 1000000 30P E= µV/m, where P is the eirp (Watts). 3 Report No.: RF181023C12A-1 Page No. 13 / 24 Report Format Version: 6.1.1 Reference No.: 181023C11

4.1.2 Test Instruments Description & Manufacturer Model No. Serial No. Cal. Date Cal. Due Test Receiver ESIB7 100187 May 29, 2018 May 28, 2019 ROHDE & SCHWARZ Spectrum Analyzer FSP40 100040 Sep. 25, 2018 Sep. 24, 2019 ROHDE & SCHWARZ BILOG Antenna VULB9168 9168-155 Nov. 21, 2018 Nov. 20, 2019 SCHWARZBECK HORN Antenna BBHA 9120D 9120D-1170 Mar. 25, 2018 Mar. 24, 2019 SCHWARZBECK HORN Antenna BBHA 9170 BBHA9170241 Nov. 25, 2018 Nov. 24, 2019 SCHWARZBECK Loop Antenna HLA 6121 45745 Jun. 14, 2018 Jun. 13, 2019 TESEQ Preamplifier Agilent 8447D 2944A10631 Aug. 08, 2018 Aug. 07, 2019 (Below 1GHz) Preamplifier KEYSIGHT 83017A MY53270295 Jul. 02, 2018 Jul. 01, 2019 (Above 1GHz) RF signal cable SUCOFLEX 104 MY 13380+295012/04 Aug. 08, 2018 Aug. 07, 2019 HUBER+SUHNER RF signal cable SUCOFLEX 104 Cable-CH4-03 (250724) Aug. 08, 2018 Aug. 07, 2019 HUBER+SUHNER Software ADT_Radiated_ NA NA NA BV ADT V7.6.15.9.5 Antenna Tower MA 4000 010303 NA NA inn-co GmbH Antenna Tower Controller AT100 AT93021703 NA NA BV ADT Turn Table TT100 TT93021703 NA NA BV ADT Turn Table Controller SC100 SC93021703 NA NA BV ADT Boresight Antenna Fixture FBA-01 FBA-SIP01 NA NA Pre-amplifier (18GHz-40GHz) EMC184045B 980175 Nov. 14, 2018 Nov. 13, 2019 EMC Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Chamber 4. 3. The FCC Designation Number is TW0003. The number will be varied with the Lab location and scope as attached. 4. The IC Site Registration No. is 7450F-4. Report No.: RF181023C12A-1 Page No. 14 / 24 Report Format Version: 6.1.1 Reference No.: 181023C11

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Parallel, perpendicular, and ground-parallel orientations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is ≥ 1/T (Duty cycle < 98%) or 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF181023C12A-1 Page No. 15 / 24 Report Format Version: 6.1.1 Reference No.: 181023C11

4.1.5 Test Setup For Radiated emission below 30MHz 1m EUT& 3m Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable 3m 10m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF181023C12A-1 Page No. 16 / 24 Report Format Version: 6.1.1 Reference No.: 181023C11

For Radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions a. Placed the EUT on the testing table. b. Prepared a notebook to act as a communication partner and placed it outside of testing area. c. The communication partner connected with EUT via a RJ45 cable and ran a test program (provided by manufacturer) to enable EUT under transmission condition continuously at specific channel frequency. d. The communication partner sent data to EUT by command "PING". Report No.: RF181023C12A-1 Page No. 17 / 24 Report Format Version: 6.1.1 Reference No.: 181023C11

4.1.7 Test Results Above 1GHz Data: 802.11g + 802.11a DETECTOR Peak (PK) CHANNEL CH 6 + CH 52 FUNCTION Average (AV) FREQUENCY RANGE 1GHz ~ 40GHz ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 *2437.00 110.4 PK 1.39 H 219 77.0 33.4 2 *2437.00 100.4 AV 1.39 H 219 67.0 33.4 3 4874.00 52.4 PK 74.0 -21.6 2.01 H 303 40.0 12.4 4 4874.00 38.9 AV 54.0 -15.1 2.01 H 303 26.5 12.4 5 5150.00 59.7 PK 74.0 -14.3 1.20 H 237 47.9 11.8 6 5150.00 46.4 AV 54.0 -7.6 1.20 H 237 34.6 11.8 7 *5260.00 114.7 PK 1.20 H 237 74.2 40.5 8 *5260.00 104.2 AV 1.20 H 237 63.7 40.5 9 11520.00 62.8 PK 74.0 -11.2 3.02 H 244 39.5 23.3 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 *2437.00 116.9 PK 1.99 V 284 83.5 33.4 2 *2437.00 106.8 AV 1.99 V 284 73.4 33.4 3 4874.00 52.9 PK 74.0 -21.1 3.09 V 211 40.5 12.4 4 4874.00 39.9 AV 54.0 -14.1 3.09 V 211 27.5 12.4 5 5150.00 60.7 PK 74.0 -13.3 2.00 V 167 48.9 11.8 6 5150.00 47.4 AV 54.0 -6.6 2.00 V 167 35.6 11.8 7 *5260.00 119.4 PK 2.00 V 167 78.9 40.5 8 *5260.00 108.7 AV 2.00 V 167 68.2 40.5 9 #10520.00 62.8 PK 68.2 -5.4 3.02 V 211 40.5 22.3 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF181023C12A-1 Page No. 18 / 24 Report Format Version: 6.1.1 Reference No.: 181023C11

Below 1GHz data 802.11g + 802.11a CHANNEL CH 6 + CH 52 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 55.18 27.3 QP 40.0 -12.7 1.00 H 79 36.5 -9.2 2 123.23 29.1 QP 43.5 -14.4 1.50 H 95 40.0 -10.9 3 187.39 21.7 QP 43.5 -21.8 1.00 H 251 32.6 -10.9 4 257.38 23.4 QP 46.0 -22.6 1.00 H 168 32.6 -9.2 5 337.10 25.2 QP 46.0 -20.8 1.00 H 251 32.6 -7.4 6 663.74 26.1 QP 46.0 -19.9 1.50 H 129 27.4 -1.3 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit of frequency range 30MHz ~ 1000MHz 4. Margin value = Emission Level – Limit value 5. The emission levels were very low against the limit of frequency range 9kHz ~ 30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report Report No.: RF181023C12A-1 Page No. 19 / 24 Report Format Version: 6.1.1 Reference No.: 181023C11

CHANNEL CH 6 + CH 52 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 41.57 35.7 QP 40.0 -4.3 1.00 V 301 44.8 -9.1 2 103.78 26.6 QP 43.5 -16.9 1.00 V 7 39.3 -12.7 3 138.78 25.9 QP 43.5 -17.6 1.00 V 7 35.2 -9.3 4 265.16 25.1 QP 46.0 -20.9 1.00 V 331 34.1 -9.0 5 337.10 27.5 QP 46.0 -18.5 1.00 V 81 34.9 -7.4 6 615.13 26.6 QP 46.0 -19.4 1.00 V 7 28.6 -2.0 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit of frequency range 30MHz ~ 1000MHz 4. Margin value = Emission Level – Limit value 5. The emission levels were very low against the limit of frequency range 9kHz ~ 30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report Report No.: RF181023C12A-1 Page No. 20 / 24 Report Format Version: 6.1.1 Reference No.: 181023C11

4.2 Conducted Out of Band Emission Measurement 4.2.1 Limits of Conducted Out of Band Emission Measurement Below -30dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.2.2 Test Setup SPECTRUM EUT Attenuator ANALYZER 4.2.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.2.4 Test Procedure MEASUREMENT PROCEDURE REF a. Set the RBW = 100 kHz. b. Set the VBW ≥ 300 kHz. c. Detector = peak. d. Sweep time = auto couple. e. Trace mode = max hold. f. Allow trace to fully stabilize. g. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. MEASUREMENT PROCEDURE OOBE a. Set RBW = 100 kHz. b. Set VBW ≥ 300 kHz. c. Detector = peak. d. Sweep = auto couple. e. Trace Mode = max hold. f. Allow trace to fully stabilize. g. Use the peak marker function to determine the maximum amplitude level. 4.2.5 Deviation from Test Standard No deviation. 4.2.6 EUT Operating Condition The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF181023C12A-1 Page No. 21 / 24 Report Format Version: 6.1.1 Reference No.: 181023C11

4.2.7 Test Results The spectrum plots are attached on the following pages. D1 line indicates the highest level, and D2 line indicates the 30dB offset below D1. It shows compliance with the requirement. 802.11g CH 6 + 802.11a CH 52 Chain 0 Chain 1 Chain 2 Chain 3 Report No.: RF181023C12A-1 Page No. 22 / 24 Report Format Version: 6.1.1 Reference No.: 181023C11

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF181023C12A-1 Page No. 23 / 24 Report Format Version: 6.1.1 Reference No.: 181023C11

Appendix – Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF181023C12A-1 Page No. 24 / 24 Report Format Version: 6.1.1 Reference No.: 181023C11


Document Created: 2019-07-07 16:49:18
Document Modified: 2019-07-07 16:49:18
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC