User Manual-3

FCC ID: PY318300421

Users Manual

Download: PDF
FCCID_4018303

Notification of Compliance

Regulatory Compliance Information
This document includes user requirements for operating NETGEAR products in accordance with national laws
including usage of radio spectrum and operation of radio devices. Failure of the end-user to comply with the
applicable requirements may result in unlawful operation and adverse action against the end-user by the applicable
national regulatory authority.

The NETGEAR product firmware limits operation to only the channels allowed in a particular region or country.
Therefore, all options described in this document may not be available in your version of the product.

This document applies to both Class A and Class B devices:

        Class A devices are intended to be used in a commercial or industrial environment. They are not intended
         to be used in a residential home or be available for general public use.
        Class B devices are intended to be used in a residential setting, and may also be used in commercial and
         industrial applications. Examples of Class B devices are telephones, personal computers, and residential
         data gateways.
        Fuses should only be installed by service personnel.
        NETGEAR recommends the use of 26 AWG or larger gauge phone line cords.



Europe – EU Declaration of Conformity
This section applies to products bearing the CE or CE! mark:



Products bearing the CE or CE! mark comply with the following EU directives:

        EMC Directive 2014/30/EU
        Low Voltage Directive 2014/35/EU
        Radio Equipment Directive 2014/53/EU (RED – from 6/13/2017)
        Ecodesign Directive 2009/125/EC
        RoHS Directive 2011/65/EU

If the product has telecommunications functionality, it also complies with the requirement of the following EU
directive:

        R&TTE Directive 1999/5/EC (until 6/13/2017)

Compliance with these Directives implies conformity to harmonized European standards that are noted in the EU
Declaration of Conformity. The EU CE Declaration of Conformity may be found at
http://support.netgear.com/app/answers/detail/a_id/11621/.

NETGEAR products comply with the requirement of Article 10(2) as it can be operated in at least one Member State
as examined.

In accordance with Article 10(10) NETGEAR products which are restricted to indoor use only bear the following
pictogram on the packaging:-


NETGEAR Notifications of Compliance               revised 9/11//2018                                             Page 1


The following products are certified for outdoor use:-

        WND930
        Arlo Security Cameras

Caution for installing this equipment outdoors: (Valid in all EU member states, EFTA states, and Switzerland). Be
aware that outdoor installations require special attention and will only be handled by trained and qualified installation
personnel. No one from the general public is permitted to install NETGEAR wireless products outdoors when
external antennas, power and grounding must be installed for use. Particular attention has to be given allowed
operational frequencies. Contact NETGEAR for instructions on how to contact an installer for outdoor operations if
this product requires the special considerations for outdoor installations. For detailed information concerning
installations in France, the user should contact the national spectrum authority in France (http://www.arcep.fr/ )

Specific precautions for EMC
Warning: NETGEAR Class A equipment is compliant with Class A of EN 55032. In a residential environment this
equipment may cause radio interference.

NETGEAR products are tested to the requirements of EN 55032 (Emissions) and EN 55024 (immunity). There are no
specific precautions which must be taken in order to comply with the requirements of Directive 2014/30/EU Essential
Requirements in Section 1 of Annex I.

In addition, NETGEAR wireless products are further tested to ensure spurious emissions are within the specified
limits, as well as meeting the requirements for adaptivity, which mitigates against problems caused by co-location
with other wireless products.

NETGEAR products are not subject to the requirements in Section 2 of Annex I of Directive 2014/30/EU for fixed
installations.

The following paragraphs apply to WN2500RP:

This device is a 2.4GHz and 5GHz wideband transmission system (transceiver), intended for indoor use only in all EU
member states, EFTA states, and Switzerland.

In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to
use the device for setting up outdoor radio links and/or for applying public access to telecommunications and/or
network services.

This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may
be limited to 10mW EIRP in the frequency range of 2454-2483.5 MHz. For detailed information the end-user should
contact the national spectrum authority in France.

The following paragraph applies to the LG2210:

External antenna requirement: Net gain (antenna + cable) of external antenna is required to be less than 1.14dBi
(minimum gain of internal antenna).



NETGEAR Notifications of Compliance                 revised 9/11//2018                                             Page 2


The following paragraph applies to the LB2110, LB1110, LB1111:

External antenna requirement: Net gain (antenna + cable) of external antenna is required to be less than 1.5dBi
(minimum gain of internal antenna).

The following paragraph applies to the FS205, FS208:

Use only power supplies listed below:

          Model number: MU03B5050070-C5, Part Number: 332-10670-01
          Model number: AD2015000007LF, Part Number: 332-10665-01

Compliance with 2014/53/EU Radio Equipment Directive (RED)

NETGEAR wireless products comply with the requirement of Article 10(2) of the RED as they can be operated in at
least one Member State as examined. The product also complies with Article 10(10) as it has no restrictions on
putting into service in all EU Member States, except as shown below.

Apart from the exceptions shown below, this product is for indoor use only:-

WND930, Arlo security cameras

In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table provides information on the frequency
bands used and the maximum RF transmit power of NETGEAR wireless products for sale in the EU:-

Wi-Fi

 Frequency range (MHz)           Channels used        Max. Transmit Power (dBm/mW)

 2400-2483.5                     1-13                 ODFM: 19.9dBm (97.7mW)
                                                      CCK: 17.9dBm (61.7mW)
 5150-5250                       36-48                22.9dBm (195mW)
 5250-5350                       52-64                22.9dBm (195mW) with TPC
                                                      19.9dBm (97.7mW) non-TPC
 5470-5725                       100-140              29.9dBm (977mW) with TPC
                                                      26.9dBm (490mW) non-TPC

TPC: Transmit Power Control.

Cellular

 Frequency (MHz)                 Bands used          Max. Transmit Power (dBm/mW)
 700                             LTE Band 28         FDD: 23.9dBm (245mW)
 800                             LTE Band 20         FDD: 23.9dBm (245mW)
 900                             3G Band 8           WCDMA/HSDPA/HSUPA: 23.9dBm (245mW)
 900                             LTE Band 8          FDD: 23.9dBm (245mW)
 1800                            LTE Band 3          FDD: 23.9dBm (245mW)
 2100                            3G Band 1           WCDMA/HSDPA/HSUPA: 23.9dBm (245mW)
 2100                            LTE Band 1          FDD: 23.9dBm (245mW)
 2300                            LTE Band 40         TDD: 23.9dBm (245mW)
 2600                            LTE Band 7          FDD: 23.9dBm (245mW)
 2600                            LTE Band 38         TDD: 23.9dBm (245mW)




NETGEAR Notifications of Compliance               revised 9/11//2018                                           Page 3


Warning
NETGEAR Class A products that may be utilized in domestic/residential environments may cause radio interference
in which case the user may be required to take adequate measures.

This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your
body.

Prevention of hearing loss
The following statement applies to the ABD1000:-



                     CAUTION: Permanent hearing loss may occur if earphones or headphones are used at high
                    volume for prolonged periods of time.

This device and earphone have been tested to comply with the Sound Pressure Level requirement laid down in the
applicable EN 50332-1 and/or EN 50332-2 standards.



FCC Requirements for Operation in the United States
Information in this section applies to products bearing the FCC mark (or statement):




FCC Information to User
This NETGEAR product does not contain any user serviceable components and is to be used with approved
antennas only. Any product changes or modifications will invalidate all applicable regulatory certifications and
approvals.

Devices authorized under the SDoC procedure must also include a compliance information statement (in the user
manual or on a separate sheet) as required by Section 2.1077. The objective of this compliance statement is to allow
the FCC to associate the equipment with the party responsible for compliance with the identification, by name,
address and telephone number, of the responsible party, as defined in Section 2.909. The responsible party for a
Declaration of Conformity must be located within the United States.

The following statement applies to these products:

         AL1101                    FS208v2                    R6050                      WNA1000Mv2
         C6300                     FS305v2                    R6200v3                    WND930
         C7000BMX                  FS308v2                    R6220                      WNDA3100v3
         D3600                     FS605v4                    R7500                      WNDR3400v3
         D3610                     FS608v4                    R7900                      WNDR3700v5
         D6000                     GS205v2                    R8000                      WNDR4300v2
         D6010                     GS208v2                    STS7000                    WNDR4500v3
         D6200V2                   GS305                      VEGN2200                   WNR2010
         D7000                     GS308v2                    VMB3000                    WNR2020
         EX2700                    GS605v5                    VMC3010                    WNR614
         EX3700                    GS608v4                    VMC3030                    WNR618
         EX6100                    HMNC100                    WN370
         EX6150                    JNR1010v2                  WN1000v4
         EX6200                    JR6150                     WN2500RP
         EX7000                    JWNR2000v5                 WN3000RPv2
         FS205v2                   JWNR2010v5                 WN3500RP


NETGEAR Notifications of Compliance                revised 9/11//2018                                              Page 4


This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or
transmitter except in accordance with FCC multi-transmitter product procedures.

The following statement applies to products where the FCC compliance statement cannot be included on the label:

        A7000
        ABB1000
        AL1101
        RBK40
        VMA4400Cv2

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

The following statement applies to these products:

        Product type: LTE Camera
        Model number: VML4030
        FCC ID: PY316200352
        Contains FCC ID: MCLT77W595


FCC Guidelines for Human Exposure
The NETGEAR product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The
equipment should be installed and operated with minimum distance of 20cm between the radiator and your body,
except as stated below.

The following statement applies to this product:

        WNDR4300

This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device
should be installed and operated with minimum distance of 21cm between the radiator and your body.

The following statement applies to this product:

        WAC505

This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device
should be installed and operated with minimum distance of 22cm between the radiator and your body.

The following statement applies to this product:

        RBW30
        R6700v3
        WNDAP660
        WNDAP620

This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device
should be installed and operated with minimum distance of 23cm between the radiator and your body.




NETGEAR Notifications of Compliance                revised 9/11//2018                                            Page 5


The following statement applies to this product:

           C6250
           R7000P

This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device
should be installed and operated with minimum distance of 24cm between the radiator and your body.

The following statement applies to this product:

            C6300XB3                                          WN2000RPT
            D7000                                             WNDR4500
            R64000v2                                          WNR2000
            WAC720


This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device
should be installed and operated with minimum distance of 25cm between the radiator and your body.

The following statement applies to this product:

           C7100V
           EX6400
           RBR50/RBS50 (Orbi)
           RBS50Y
           WAC730

This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device
should be installed and operated with minimum distance of 26cm between the radiator and your body.

The following statement applies to this product:

           EX7000
           WNDAP360

This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device
should be installed and operated with minimum distance of 27cm between the radiator and your body.

The following statement applies to this product:

           R7500
           R9000
           SRS60/SRR60
           WND930

This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device
should be installed and operated with minimum distance of 28cm between the radiator and your body.

The following statement applies to this product:

           C7000v2
           D7800
           R7800
           R9000
           RBR40/RBS40



NETGEAR Notifications of Compliance                revised 9/11//2018                                            Page 6


This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device
should be installed and operated with minimum distance of 29cm between the radiator and your body.

The following statement applies to this product:

            C7000                                 R6900                                RBR40
            EX3700                                R7300
            R6700v1/v2                            R7900
            R6800                                 R8000


This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device
should be installed and operated with minimum distance of 30cm between the radiator and your body.

The following statement applies to this product:

           XR700

This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device
should be installed and operated with minimum distance of 31cm between the radiator and your body.

The following statement applies to this product:

           CBR40

This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device
should be installed and operated with minimum distance of 32cm between the radiator and your body.

The following statement applies to this product:

           R6400v1
           R7300

This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device
should be installed and operated with minimum distance of 33cm between the radiator and your body.

The following statement applies to this product:

           C6300BD

This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device
should be installed and operated with minimum distance of 35cm between the radiator and your body.

The following statement applies to this product:

           C7800

This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device
should be installed and operated with minimum distance of 37cm between the radiator and your body.

The following statement applies to this product:

           WNDAP350

This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device
should be installed and operated with minimum distance of 41cm between the radiator and your body.




NETGEAR Notifications of Compliance                revised 9/11//2018                                            Page 7


The following statement applies to this product:

        R8500

This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device
should be installed and operated with minimum distance of 43cm between the radiator and your body.

The following statement applies to this product:

        WAC740

This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device
should be installed and operated with minimum distance of 48cm between the radiator and your body.

The following statement applies to this product:

        AC791L
        AC797S
        AC815S
        MR1100

This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device
should be installed and operated with minimum distance of 10mm between the radiator and your body.

FCC Declaration of Conformity
We, NETGEAR, Inc., 350 East Plumeria Drive, San Jose, CA 95134, declare under our sole responsibility that this
product complies with Part 15 Subpart B of FCC CFR47 Rules. Operation is subject to the following two conditions:

        The device may not cause harmful interference, and
        The device must accept any interference received, including interference that may cause undesired
         operation.

FCC Radio Frequency Interference Warnings & Instructions
Class B products
The NETGEAR product has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following methods:

        Reorient or relocate the receiving antenna.
        Increase the separation between the equipment and the receiver.
        Connect the equipment into an electrical outlet on a circuit different from that which the radio receiver is
         connected.
        Consult the dealer or an experienced radio/TV technician for help.

Class A products
The NETGEAR product has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful



NETGEAR Notifications of Compliance                revised 9/11//2018                                              Page 8


interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.

FCC RF Radiation Exposure and SAR Statements
The information in this section applies to products that transmit data or communicate wirelessly.

SAR Statement
The information in this section applies to NETGEAR wireless products that are intended to be operated close to
human body.

NETGEAR products that are intended to be operated close to the human body are tested for body-worn Specific
Absorption Rate (SAR) compliance. The SAR limit set by the FCC is 1.6 W/kg.

The FCC has established detailed SAR requirements and NETGEAR products meet these requirements.

NETGEAR products comply with ANSI/IEEE C95.1-1999 and are tested in accordance with the measurement
methods and procedures specified in OET Bulletin 65 Supplement C.

NETGEAR products that are installed in USB ports demonstrate SAR compliance using a typical laptop
computer with a USB port. Other applications, such as handheld computers or similar devices, have not
been verified and might not compliance with related RF exposure rule and such use is prohibited.

The following statement applies to these products:

        AC797S

This product meets applicable national SAR limits of 1.6W/kg. When carrying the product or using it while worn on
your body, maintain a distance of 10mm from the body to ensure compliance with RF exposure requirements.

RF Exposure Information
NETGEAR products have been evaluated under FCC Bulletin OET 65C (01-01) and found to be compliant to the
requirements as set forth in CFR 47 Sections, 2.1093, and 15.247 (b) (4) addressing RF exposure from radio
frequency devices. NETGEAR products meet the applicable government requirements for exposure to radio
frequency waves. To see the test results reporting the highest SAR level measured for this device, visit
http://www.netgear.com/about/regulatory/declarations-conformity/

Radiation exposure: NETGEAR products comply with radiation exposure limits set forth for an uncontrolled
environment and meet radio frequency (RF) exposure guidelines for wireless routers. NETGEAR products should be
installed and operated keeping the product 20cm or more away from a person’s body. For devices that are battery
powered and may be operated closer than 20cm to you, refer to the NETGEAR website for exposure levels.

NETGEAR USB dongle transmitters are approved for use in typical laptop computers. To comply with FCC RF
exposure requirements, do not use NETGEAR USB dongle transmitters in other devices or certain laptop and tablet
computer configurations where the USB connectors on the host computer are unable to provide or ensure the
necessary operating configurations intended for the device and its users or bystanders to satisfy RF exposure
compliance requirements.

FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate this equipment.

NETGEAR products comply with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1)
NETGEAR products may not cause harmful interference, and (2) NETGEAR products must accept any interference
received, including interference that may cause undesired operation.




NETGEAR Notifications of Compliance               revised 9/11//2018                                            Page 9


For products available in the USA market, only channel 1~11 can be operated. Selection of other channels is not
possible.

The following statement applies to these products:

           D2200D

This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA.

On the product label of this equipment is a label that contains, among other information, a product identified in the
format US:WXXXXYYYZZZZZ. If requested, this number must be provided to the telephone company.

The following statement applies to these products:

           AC779S                   EX6100                     R6050                      WN3000RPv2
           AC815S                   EX6150                     R6200v3                    WN3000RPv3
           C6300                    EX6200                     R6220                      WN3500RP
           C7000BMX                 EX7000                     R7300                      WNDR3100v3
           D2200D                   HMNC100                    R7500                      WNDR3400v3
           D3600                    JNR1010v2                  R7800                      WNA1000Mv2
           D3610                    JR6150                     R8500                      WNDR3700v5
           D6000                    JWNR2000v5                 VEGN2200                   WNDR4300v2
           D6010                    JWNR2010v5                 VMB3000                    WNDR4500v3
           D6200V2                  PLW1000                    VMC3010                    WNR1000v4
           D7000                    PLW1010                    VMC3030                    WNR2010
           D7800                    PLW1000v2                  WAC120                     WNR2020
           DST6501                  PLW1010v2                  WN370                      WNR614
           EX2700                   R6050                      WN2500RP                   WNR618
           EX3700                   R6200v3                                            

The device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or
transmitter except in accordance with FCC multi-transmitter product procedures.

The following statement applies to these products:

           C6300                    EX6100                     R7500v2                    WNDAP360
           C6300BD                  EX6120                     R7800                      WNDAP620
           C6300XB3                 EX6200                     R7900                      WNDAP660
           C7000                    EX7000                     R8000                      WNDR3700v5
           C7000BMX                 HMNC100                    R8500                      WNDR4300v2
           D3600                    JR6150                     STS7000                    WNDR4500v3
           D3610                    PLW1000v2                  WAC720                  
           D6000                    PLW1010v2                  WAC730                  
           D6010                    R6050                      WAC740                  
           D6200V2                  R6200v3                    WN2500RP                
           D7000                    R6220                      WND930                  
           D7800                    R7300                      WNDA3100v3              
           EX3700                   R7500                      WNDAP350                

The device operates in 5.15~5.25GHz frequency range. It is restricted in indoor environment only.

The following statements apply to this product:

           A6210                    PLW1010
           DST6501                  WAC120
           PLW1000                  WNDR3400v3




NETGEAR Notifications of Compliance                revised 9/11//2018                                           Page 10


The device operates in 5.15 ~ 5.25GHz / 5.47 ~5.725GHz frequency range. It is restricted in indoor environment only.
The band from 5600-5650MHz will be disabled by the software during the manufacturing and cannot be changed by
the end user. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.

The following statements apply to this product:

          EX6150

The device operates in all bands of the 5GHz GHz frequency range. It is restricted in indoor environment only. The
band from 5600-5650MHz will be disabled by the software during the manufacturing and cannot be changed by the
end user. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.

Non-DFS Warning
NETGEAR non-DFS products do not support operation in the 5600-5650MHz band. The firmware on the device
restricts the operation in this frequency band and does not utilize the channels in this band.

NETGEAR non-DFS products will not permit operations on channels 120–132 for 11a and 11n/a, which overlap the
5600–5650MHz band.

The following statements apply to these products:

                   A6210                     PLW1010                   R7900
                   C7000                     PLW1000v2                 R8000
                   DST6501                   PLW1010v2                 WAC120
                   HMNC100                   R7500                     WNDR3400v3
                   PLW1000


NETGEAR DFS products do not support operation in the 5600-5650MHz band. The firmware on the device restricts
the operation in this frequency band and does not utilize the channels in this band.

NETGEAR DFS products will not permit operations on channels 120–132 for 11a and 11n/a, which overlap the 5600–
5650MHz band.

Country Code Selection Usage (WLAN devices)
The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all
WiFi product marketed in US must fixed to US operation channels only.



TV Tuner (on Selected Models)
The information in this section applies to NETGEAR products incorporating a TV tuner.

Note to CATV System Installer: This reminder is provided to call the CATV system installer’s attention to Section 820-
93 of the National Electrical Code, which provides guidelines for proper grounding and, in particular, specifies that the
Coaxial cable shield be connected to the grounding system of the building as close to the point of cable entry as
possible.



Canadian Department of Communications Radio Interference
Regulations
The information in this section applies to products bearing the statements:.

          “This digital apparatus does not exceed the Class B limits for radio-noise emissions from digital apparatus
          as set out in the Radio Interference Regulations of the Canadian Department of Communications.”


NETGEAR Notifications of Compliance                 revised 9/11//2018                                          Page 11


             “Cet appareil numérique ne dépasse pas les limites de la classe B pour les émissions radio bruit des
            appareils numériques, tel qu'énoncé dans le Règlement sur le brouillage radioélectrique du ministère des
            Communications du Canada.”


            CAN ICES-3 (B)/NMB-3(B)
            CAN ICES-3 (A)/NMB-3(A)

Industry Canada
NETGEAR products comply with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) NETGEAR products may not cause harmful interference, and (2) NETGEAR products
must accept any interference received, including interference that may cause undesired operation.

            A6210                     EX6100                    R6220                      WN370
            ABB1000                   EX6150                    R7500                      WNA1000Mv2
            AC340U                    EX6200                    R8000                      WNDR3100v3
            AL1101                    EX7000                    VD-1104                    WNDR3400v3
            C7000BMX                  HMNC100                   VMB3000                    WNDR3700v5
            D6000                     JNR1010v2                 VMC3010                    WNDR4300v2
            D6010                     JR6150                    VMC3030                    WNDR4500v3
            D3600                     JWNR2000v5                WAC104                     WNR1000v4
            D3610                     JWNR2010v5                WAC120                     WNR2010
            EX2700                    R6050                     WAC740                     WNR2020
            EX3700                    R6200v3                   WN3000RPv3                 WNR614

Ce dispositif est conforme à la norme CNR d'Industrie Canada applicable aux appareils radio exempts de licence.
Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage
préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer
un fonctionnement indésirable.

            A6210                     EX6150                    R7500                      WNA1000Mv2
            ABB1000                   EX6200                    R8000                      WNDR3100v3
            AC340U                    EX7000                    VD-1104                    WNDR3400v3
            AL1101                    HMNC100                   VMB3000                    WNDR3700v5
            C7000BMX                  JNR1010v2                 VMC3010                    WNDR4300v2
            D6000                     JR6150                    VMC3030                    WNDR4500v3
            D6010                     JWNR2000v5                WAC104                     WNR1000v4
            D3600                     JWNR2010v5                WAC120                     WNR2010
            D3610                     R6050                     WAC740                     WNR2020
            EX2700                    R6200v3                   WN3000RPv3                 WNR614
            EX3700                    R6220                     WN370                      WNR618
            EX6100


The following statements apply to this product:

           EX6100
           R7500
           VMB3000
           WNDA3100v3

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum
(or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other
users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is
not more than that necessary for successful communication.




NETGEAR Notifications of Compliance                 revised 9/11//2018                                           Page 12


Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne
d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire
les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son
gain de sorte que la puissance isotrope rayonnée quivalente (p.i.r.e.) ne dépassepas l'intensité nécessaire à
l'établissement d'une communication satisfaisante.

This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the
maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not
included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use
with this device.

Le présent émetteur radio a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés
ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types
d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits
pour l'exploitation de l'émetteur.

The following statement applies to these products:

           Product type: LTE Camera
           Model number: VML4030
           ISED ID: 4054A-16200352
           Contains ISED ID: 2878D-T77W595

The paragraph below applies to the following NETGEAR products:-

            EX3700                   EX7000                         R7500
            EX6150                   JNR3210                        WN203
            EX6200                   R7000


The above radio transmitters with detachable antennas have been approved by Industry Canada to operate with the
antenna types listed below:-

            Master Wave Technology 98619PRSX005                       Master Wave Technology 98364PRSX004
            Master Wave Technology 98619PRSX006                       Master Wave Technology 98365PRSX000
            Master Wave Technology 98241MRSX012                       Master Wave Technology 98365PRSX001
            Master Wave Technology 98365PRSX002                       Wha Yu Industrial Co Ltd C529-510542-A
            Master Wave Technology 98370PIPF000                       Master Wave Technology 98242MIPF020
            Master Wave Technology 98370PIPF001                       Master Wave Technology 98242UIPF000


The following antenna table applies to VMB3000 product:




The following antenna table applies to R7500 product:




NETGEAR Notifications of Compliance                 revised 9/11//2018                                            Page 13


The following antenna table applies to EX6100 product:

  Ant.         Brand           Model Name          Antenna Type         Connector      Gain (dBi)        Remark

                                                                                    2.4GHz    5GHz

    1       Master Wave        X6100-98242         Dipole Antenna         I-PEX      3.31        -       External

    2         Foxconn        FX01H74-0G-EF          PCB Antenna           I-PEX      3.66        -        Internal

    3       Master Wave        X6100-98242         Dipole Antenna         I-PEX       -          5       External



The following antenna table applies to D7800 product:

  Ant.         Brand           Model Name          Antenna Type         Connector      Gain (dBi)        Remark

                                                                                    2.4GHz    5GHz

    1       Master Wave       98365PRSX00x         Dipole Antenna        RSMA        0.41      1.61      External
                                 (x=3,4,5)




IMPORTANT NOTE: Radiation Exposure Statement
NETGEAR products comply with IC radiation exposure limits set forth for an uncontrolled environment. NETGEAR
products should be installed and operated with minimum distance 40cm between the radiator and your body, except
as stated below. To comply with RSS 102 RF exposure compliance requirements, a separation distance of at least 20
cm must be maintained between the antenna of this device and all persons.

The following statement applies to this product:



NETGEAR Notifications of Compliance                revised 9/11//2018                                   Page 14


        RBR40

This product complies with IC radiation exposure limits set forth for an uncontrolled environment. NETGEAR
products should be installed and operated with minimum distance 29cm between the radiator and your body.

The following statement applies to this product:

        VML4030

This product complies with IC radiation exposure limits set forth for an uncontrolled environment. NETGEAR
products should be installed and operated with minimum distance 34cm between the radiator and your body.

The following statement applies to this product:

        WNDAP350

This product complies with IC radiation exposure limits set forth for an uncontrolled environment. NETGEAR
products should be installed and operated with minimum distance 41cm between the radiator and your body.

The following statement applies to this product:

        EX6150
        WAC720

This product complies with IC radiation exposure limits set forth for an uncontrolled environment. NETGEAR
products should be installed and operated with minimum distance 46cm between the radiator and your body.

The following statement applies to this product:

        EX3700
        EX6120
        R6260
        R6350
        R6700v3
        R6850

This product complies with IC radiation exposure limits set forth for an uncontrolled environment. NETGEAR
products should be installed and operated with minimum distance 50cm between the radiator and your body.

The following statement applies to this product:

        WAC505

This product complies with IC radiation exposure limits set forth for an uncontrolled environment. NETGEAR
products should be installed and operated with minimum distance 52cm between the radiator and your body.

The following statement applies to this product:

        WAC740

This product complies with IC radiation exposure limits set forth for an uncontrolled environment. NETGEAR
products should be installed and operated with minimum distance 53cm between the radiator and your body.

The following statement applies to this product:

        R7000P
        RBW30

NETGEAR Notifications of Compliance                revised 9/11//2018                                        Page 15


           SRR60
           SRS60

This product complies with IC radiation exposure limits set forth for an uncontrolled environment. NETGEAR
products should be installed and operated with minimum distance 56cm between the radiator and your body.

The following statement applies to this product:

           RBR40
           RBS40

This product complies with IC radiation exposure limits set forth for an uncontrolled environment. NETGEAR
products should be installed and operated with minimum distance 58cm between the radiator and your body.

The following statement applies to this product:

           R7300
           R8000

This product complies with IC radiation exposure limits set forth for an uncontrolled environment. NETGEAR
products should be installed and operated with minimum distance 60cm between the radiator and your body.

The following statement applies to this product:

           C7000
           D7800
           R6700v2
           WAC730

This product complies with IC radiation exposure limits set forth for an uncontrolled environment. NETGEAR
products should be installed and operated with minimum distance 70cm between the radiator and your body.

NETGEAR products comply with the Canada portable RF exposure limit set forth for an uncontrolled environment
and are safe for intended operation as described in its manual. Further RF exposure reduction can be achieved by
keeping the product as far as possible from your body or by setting the device to a lower output power if such a
function is available.

For products available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is
not possible.

The following statement applies to these products:

            C7000BMX                EX7000                     STS7000                   WNDR3700v5
            D6000                   HMNC100                    VEGN2200                  WNDR4300v2
            D6010                   JNR1010v2                  VMB3000                   WNDR4500v3
            D3600                   JR6150                     VMC3010                   WNR1000v4
            D3610                   JWNR2000v5                 VMC3030                   WNR2010
            D6200V2                 JWNR2010v5                 WN370                     WNR2020
            EX2700                  R6050                      WN2500RP                  WNR614
            EX3700                  R6200v3                    WN3000RPv2                WNR618
            EX6100                  R6220                      WN3000RPv3
            EX6150                  R7500                      WNA1000Mv2
            EX6200                  R8000                      WNDR3400v3


The device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or
transmitter except in accordance with IC multi-transmitter product procedures.


NETGEAR Notifications of Compliance                revised 9/11//2018                                        Page 16


The following statement applies to these products:

            A6210                   EX6100                     R6050                      WNDAP350
            AC785S                  EX6120                     R6200v3                    WNDAP360
            C7000BMX                EX6150                     R6220                      WNDAP620
            D6000                   EX6200                     R7300                      WNDAP660
            D6010                   EX7000                     R7500                      WNDR3700v5
            D3600                   HMNC100                    R8000                      WNDR4300v2
            D3610                   JR6150                     R8500                      WNDR4500v3
            D6200V2                 PLW1000                    STS7000
            D7800                   PLW1010                    WAC120
            DST6501                 PLW1000v2                  WN2500RP
            EX3700                  PLW1010v2                  WNDR3400v3


The device for the band 5150-5350 MHz is only for indoor usage to reduce potential for harmful interference to co-
channel mobile satellite systems.

DFS warning:
NETGEAR DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz, 5470-
5600MHz, and 5650-5725MHz:

The following statements apply to this product:

            A6210                   EX6100                     STS7500                   WNDR4300v2
            C6300BD                 HMNC100                    WAC120                    WNDR4500v3
            C6300XB3                R7500                      WNDR3100v3
            C7000BMX                R8000                      WNDR3400v3

The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz to comply with
the EIRP (Equivalent Isotropically Radiated Power) limit.

Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands
5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN
devices.

The following statement applies to this product:

           WAC120
           WNDA3100v3

The maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the EIRP (Equivalent
Isotropically Radiated Power) limits specified for point-to-point and non point-to-point operation as appropriate.

SAR warning:
NETGEAR product is compliant with SAR for general population/uncontrolled exposure limits in IC RSS-102 and has
been tested in accordance with the measurement methods and procedures specified in IEEE 1528. Maintain at least
20mm distance for body-warn condition.

NOTE IMPORTANTE: Déclaration d'exposition aux radiations
Produits NETGEAR sont conformes aux limites IC d'exposition aux rayonnements définies pour un environnement
non contrôlé. Produits NETGEAR doivent être installés et utilisés avec distance minimum de 20cm entre le radiateur
et votre corps.

La déclaration suivante s'applique à ce produit :

           R8000


NETGEAR Notifications of Compliance                 revised 9/11//2018                                        Page 17


Ce produit est conforme aux limites IC d'exposition aux rayonnements définies pour un environnement non contrôlé.
Produits NETGEAR doivent être installés et utilisés avec un minimum de 60cm entre le radiateur et votre corps.

Produits NETGEAR sont conformes à la limite d'exposition aux RF portable Canada établies pour un environnement
non contrôlé et sont sans danger pour le fonctionnement prévu comme décrit dans le manuel. Poursuite de la
réduction de l'exposition aux RF peut être réalisé en gardant le produit autant que possible de votre corps ou par le
réglage du dispositif à une puissance de sortie inférieure si une telle fonction est disponible

Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11 peuvent être exploités.
Sélection d'autres canaux n'est pas possible.

La déclaration suivante s'applique à ces produits:

        C7000BMX                    EX7000                       STS7000                  WNDR3700v5
        D6000                       HMNC100                      VEGN2200                 WNDR4300v2
        D6010                       JNR1010v2                    VMB3000                  WNDR4500v3
        D3600                       JR6150                       VMC3010                  WNR1000v4
        D3610                       JWNR2000v5                   VMC3030                  WNR2010
        D6200V2                     JWNR2010v5                   WN370                    WNR2020
        EX2700                      R6050                        WN2500RP                 WNR614
        EX3700                      R6200v3                      WN3000RPv2               WNR618
        EX6100                      R6220                        WN3000RPv3
        EX6150                      R7500                        WNA1000Mv2
        EX6200                      R8000                        WNDR3400v3
Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en association avec une autre
antenne ou transmetteur.

La déclaration suivante s'applique à ces produits:

         A6210                      EX3700                      PLW1000v2                 WAC120
         AC785S                     EX6100                      PLW1010v2                 WN2500RP
         C7000BMX                   EX6120                      R6050                     WNDR3400v3
         D6000                      EX6150                      R6200v3                   WNDAP350
         D6010                      EX6200                      R6220                     WNDAP360
         D3600                      EX7000                      R7300                     WNDAP620
         D3610                      HMNC100                     R7500                     WNDAP660
         D6200V2                    JR6150                      R8000                     WNDR3700v5
         D7800                      PLW1000                     R8500                     WNDR4300v2
         DST6501                    PLW1010                     STS7000                   WNDR4500v3


Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur
afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.

DFS avertissement:
Sélection dynamique de fréquences (DFS) pour les dispositifs fonctionnant dans les bandes 5250-5350 MHz, 5470-
5600 MHz et 5650-5725 MHz :

Les instructions suivantes s'appliquent à ce produit:

        A6210                     R7500                         WNDR4300v2
        C6300BD                   R8000                         WNDR4500v3
        C6300XB3                  STS7500
        C7000BMX                  WAC120
        EX6100                    WNDR3100v3
        HMNC100                   WNDR3400v3
Le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz et 5470-5725 MHz doit se
conformer à la limite de p.i.r.e.


NETGEAR Notifications of Compliance                  revised 9/11//2018                                       Page 18


De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés
utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces
radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.

Le gain d'antenne maximum autorisé pour les appareils dans la bande 5725-5825 MHz pour se conformer à la pire
limites fixées pour les opérations se point- à-point et non point- à-point, le cas échéant.

La déclaration suivante s'applique à ce produit;

        WAC120

Avertissement SAR:
NETGEAR est le respect de SAR pour la population générale / limites d'exposition incontrôlée de CNR-102 et a été
testé en conformité avec les méthodes et procédures de mesure spécifiées dans la norme IEEE 1528. Maintenir au
moins 20mm à distance pour la condition physique-garde.

Interference Reduction Table
The table below shows the Recommended Minimum Distance between NETGEAR equipment and household
appliances to reduce interference (in feet and meters).

 Household Appliance               Recommended Minimum Distance (in feet and meters)
 Microwave oven                    30 feet / 9 meters
 Baby monitor – analog             20 feet / 6 meters
 Baby monitor – digital            40 feet / 12 meters
 Cordless phone – analog           20 feet / 6 meters
 Cordless phone – digital          30 feet / 9 meters
 Bluetooth device                  20 feet / 6 meters
 ZigBee                            20 feet / 6 meters



Mexico NOM Warning
The following statement applies to these products:-

        AVM4000C
        VML4030

La operación de este equipo está sujeta a las siguientes dos condiciones:

 (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe
aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.



USA Safety Notices
The following statement applies to this product:

        VMC3040S

This ITE is to be connected only to PoE networks without routing to the outside plant.

The following statement applies to this product:

        RR2312
        RR3312
        RR4312



NETGEAR Notifications of Compliance                revised 9/11//2018                                           Page 19


This equipment is intended only for installation in a Restricted Access Location and it is only for qualified service
personnel.



Japan Notices VCCI
This information in this section applies to products bearing the VCCI mark:




Class A ITE




Class B ITE




Japan Wireless Notice
この製品には、認証済みの無線機器を搭載しています。

Restriction of use 5GHz W52 and W53
電波法の規定により 5GHz 帯(W52、W53)は屋内使用に限ります。



South Korea Notices
The information in this section applies to products bearing the KCC mark:




알림 : 대한민국으로 배송되는 제품인 경우

 Class A :
                                         이 기기는 업무용(A 급) 전자파적합기기로서 판매자 또는 사용자는 이 점을
 A 급 기기
                                         주의하시기 바라며, 가정외의 지역에서 사용하는 것을 목적으로 합니다.
 (업무용 방송통신기자재)
 Class B :
                                         이 기기는 가정용(B 급) 전자파적합기기로서 주로 가정에서 사용하는 것을
 B 급 기기
                                         목적으로 하며, 모든 지역에서 사용할 수 있습니다.
 (가정용 방송통신기자재)


NETGEAR Notifications of Compliance                 revised 9/11//2018                                            Page 20


For Wireless Equipment with 2,400~2,483.5MHz and/or 5725~5850MHz (The Radio Equipment Rule, Article 98, Item
No.)

해당 무선설비가 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없음

(This wireless/radio equipment can’t be used for services of safety in human life because it has a possibility of radio
interference)

Class A caution statement
 사용자안내문                               이 기기는 업무용 환경에서 사용할 목적으로 적합성평가를 받은 기기로서
                                      가정용 환경에서 사용하는 경우 전파간섭의 우려가 있습니다.



 Class A: Caution Statement           In case this device is used in a domestic environment, there is a risk of radio
                                      interference because this device has registered for EMC for business use.




Taiwan WWAN Wireless Notice
The information in this section applies to products bearing the Taiwan National Communications Commission mark:




This telecom equipment has complied with NCC regulations.

第十二條→經型式認證合格之低功率射頻電機,非經許可,公司,商號或使用者均不得擅自變更頻率、加
大功率或變更原設計之特性及功能。

第十四條→低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用
,並改善至無干擾時方得繼續使用。

前項合法通信,指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療
用電波輻射性電機設備之干擾。

在 5.25-5.35 頻帶內操作之無線資訊傳輸設備,限於室內使用。

無線資訊傳輸設備忍受合法通信之干擾且不得干擾合法通信;如造成干擾,應立即停用,俟無干擾之虞,
始得繼續使用。

無線資訊傳設備的製造廠商應確保頻率穩定性,如依製造廠商使用手冊上所述正常操作,發射的信號應維
持於操作頻帶中。

不致造成違反低功率電波輻射性電機管理辦法之所有控制、調整及開關之使用方法


NETGEAR Notifications of Compliance                revised 9/11//2018                                             Page 21


對任何可能造成違反管理辦法規定之調整予以警告,或建議由具有發射機維修專長之技術人員執行或由其
直接監督及負責

對任何可能造成違反管理辦法之零件(晶體、半導體等)置換之警告

下列聲明適用於本產品:

R7500

電磁波曝露量 MPE 標準值 1mW/cm2,送測產品實測值為:0.783945 mW/cm2

WND930




The following statement applies to Class A products:-

警告使用者 : 甲類資訊技術設備 , 於居住環境中使用 , 可能會造成射頻擾動 , 在此種情況
下 , 使用者會被要求採取某些適當的對策。


Taiwan NCC Notice
NCC general statement:

應避免影嚮附近電達系統之操作

NCC MPE statement:

SRR60, SRS60:
本產品電磁波暴露量(MPE) 標準值 1mW/cm2 , 送測產品實測值為 0.524 mW/cm2 , 建議使用時至少距離人
體 28cm

RBR20, RBS20
本產品電磁波暴露量(MPE) 標準值 1mW/cm2 , 送測產品實測值為 0.357 mW/cm2 , 建議使用時至少距離人
體 20cm

RBS50Y
本產品電磁波暴露量(MPE) 標準值 1mW/cm2 , 送測產品實測值為 0.581 mW/cm2 , 建議使用時至少距離人
體 27cm



Thailand Notice
The information in this section applies to products approved by the Thailand National Communications Commission:

เครื่ องโทรคมนาคมและอุปกรณ์นี ้ มีความสอดคล้ องตามข้ อกาหนดของ กทช.



NETGEAR Notifications of Compliance                                   revised 9/11//2018                 Page 22


China Notices
The information in this section applies to products bearing the Chinese Compulsory Certification Mark:




This device complies with the requirements in China for Safety and Quality

此为 A 级产品,在生活环境该产品可能会造成无线电干扰,在这种情况下可能需

要用户对其干扰采取确实可行的措施。

The following statement applies to products for use at altitudes >2000m:-




                   标识的含义解释: 仅适用于海拔 2000m 以下地区安全使用。

The following statement applies to products which may be used in tropical climates:-




                标识的含义解释: 仅适用于非热带气候条件下安全使用



Australia and New Zealand Notices
The information in this section applies to products bearing the Australia C-Tick and A-Tick Compulsory Marks and
Regulatory Compliance Mark (RCM):




This device equipment complies with the Australian and New Zealand regulatory approvals requirements.

Warning
NETGEAR Class A products that may be utilized in domestic/residential environments may cause radio interference
in which case the user may be required to take adequate measures.



Germany Notices
The following warning applies to Powerline products with pass-through sockets:

NETGEAR Notifications of Compliance              revised 9/11//2018                                        Page 23


Nicht hintereinander stecken.



Russia Notices
NETGEAR products which ship to the Eurasian Customs Union are assessed against the relevant requirements and
are labeled with the EAC mark as shown below:-

Продукты NETGEAR, которые поставляются в Евразийский таможенный союз, оцениваются с учетом
соответствующих требований и помечены знаком EAC, как показано ниже:-




The following warning applies to 5GHz wireless products for use outdoors in Russia:

Внимание: перед использованием точки доступа вне помещений убедитесь, что радиомодуль, работающий в
диапазоне 5 ГГц, отключен!

Использование диапазона 5 ГГц вне закрытых помещений допускается только при наличии разрешения
государственных органов, осуществляющих надзор в сфере использования радиочастот.

Получите разрешение на использование частот в диапазоне 5 ГГц, а также при необходимости другие
документы в соответствии с действующим законодательством, перед установкой точки доступа вне
помещений..



LITHIUM ION AND LITHIUM METAL BATTERY PACKAGING LABEL
REQUIREMENTS
Due to concerns about products shipping with Li-Ion and Li-Metal batteries, the UN developed guidelines regarding
the proper testing, packaging, and labeling of these devices.

Li-Ion and Li-Metal Batteries
Li-Ion batteries are generally rechargeable, while Li-Metal batteries are generally non-rechargeable. Both types of
batteries have the potential to create a fire hazard if damaged or improperly packaged.

Labeling Requirements for Li-Ion and Li-Metal Batteries
The required labels must be present on the pallets and master carton accompanied by a document such as an airway
bill or other documents that indicates the following (Lithium Battery Guidance Document 2014):

        The package contains lithium ion cells or batteries;
        The package must be handled with care and that a flammability hazard exists if the package is damaged
        Special procedures that should be followed in case the package is damaged
        Contact information

To conform to IATA’s Dangerous Good Regulations, different labels apply to different Watt-hour for Li-Ion and
different mass for Li-metal. The calculation for Watt-hours is:

         Nominal Voltage x Nominal Capacity (Ah) = Watt-hours

The volts and ampere can be found in the batteries data sheet.

NETGEAR Notifications of Compliance               revised 9/11//2018                                          Page 24


        Please see Table below for which proper label to use.

Required Labels for Battery Transportation (UN Manual of Tests and Criteria Part III Subsection 38.3)

                                                 Li-Ion Battery Label Requirements

Shipment of Battery               Wh (Watt-hour)                          Labels               Limit Battery Weight / Package

Contained in Equipment            Equal to or Less than 100Wh             Figure 12 or 13      PAX = 5 kg
(installed in the equipment)                                                                   CAO = 5kg

Alone                             Equal to or Less than 100Wh             Figure 12 or 13      Equal to or less than 2.7 Wh=2.5 kg

                                                                                               OR

                                                                                               Greater than 2.7Wh but equal to or
                                                                                               less than 100Wh = 2 batteries

Packed separately with the        Equal to or Less than 100Wh             Figure 12 or 13      PAX = 5 kg
Equipment (not installed in the                                                                CAO = 5kg
equipment)

                                                Li-Metal Battery Label Requirements

Shipment of Battery               Mass of Lithium Metal of the            Labels               Limit Battery Weight / Package
                                  battery

Contained in Equipment            Equal to or Less than 2g                Figure 12 or 13                   PAX = 5 kg
(installed in the equipment)                                                                                CAO = 5kg

Shipment of Battery               Mass of Lithium Metal of the            Labels               Limit Battery Weight / Package
                                  battery

Alone                             Equal to or Less than 2g                Figure 12 or 13      Equal to or less than 0.3g=2.5kg

                                                                                               OR

                                                                                               Greater than 0.3g but equal to or
                                                                                               less than 2g = 2 batteries

Packed separately with the        Equal to or Less than 2g                Figure 12 or 13                   PAX = 5 kg
Equipment (not installed in the                                                                             CAO = 5kg
equipment)



        If Li-Ion Battery is more than 100Wh and Li-Metal has a Lithium mass of more than 2g, please consult Environmental
        Compliance Engineer for proper label to be used.

        Label content requirement for shipping batteries:




        NETGEAR Notifications of Compliance                 revised 9/11//2018                                      Page 25


Label content for shipping smaller packages for batteries:




Exemptions for labeling
A lithium ion battery handling label is not required when a package contains not more than 2 batteries contained in
the equipment. Lithium metal batteries contained in the equipment do not need any lithium battery handling label.

Product disposable warning
NETGEAR products must not be disposed of together with domestic waste. NETGEAR products must be disposed of
at a location that is authorized to recycle electrical and electronic appliances. By collecting and recycling waste, you
help save natural resources and make sure that the product is disposed of in an environmentally friendly and healthy
way.


Tuner Cable and Battery Safety Information
Tuner Cable:
This reminder is provided to call the CATV systems installer’s attention to Section 820-93 of the National Electric
Code which provide grounding and , in particular, specify that the Coaxial cable shield shall be connected to the
grounding system of the building, so close to the point of cable entry as practical.

Battery Caution:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.




NETGEAR Notifications of Compliance                revised 9/11//2018                                           Page 26


Powerline Device Safety and EMC Information
Follow these safety guidelines to ensure your own personal safety and to help protect your system from potential
damage:

        For national approvals (approval schemes other than CB), relevant national standards for plug, socket-
         outlet, and direct plug-in units (for example, US) shall also be consulted while testing and approving such
         products according to the national standards.
        Check the electrical current for any device plugged into the filtered AC socket. Do not exceed home and
         product outlet ratings and electrical requirements.
        The socket-outlet shall be installed near the equipment and be easily accessible
        Only power cords and allowed to be inserted into the filtered AC socket; no other equipment with a direct
         plug-in is allowed. Power cords needs to be a maximum of 1m long and a minimum of 0.75mm² of cross-
         sectional area.
        Do not plug devices into the Powerline Pass Thru Adapter filtered AC outlet that exceed the product ratings.
         The output voltage of the filtered AC outlet is the same as the power outlet that the Powerline Pass Thru
         Adapter is plugged into. To help avoid damaging your system, be sure that the attached devices are
         electrically rated to operate with the power available in your location.
        If the input AC voltage is less than 100 Vac, the device plugged into the filtered AC socket of the Powerline
         Pass Thru Adapter might not perform as well as expected.
        DO NOT PLUG MAJOR HOME APPLIANCES into the filtered AC socket or into an attached power strip.
         The device is not intended to be used with home appliances such as air conditioners, power tools, space
         heaters, fans hair dryers, ovens, or refrigerators.
        Actual data throughput will vary. Network conditions and environmental factors, including volume of network
         traffic, building materials and construction, and network overhead, lower actual data throughput rate.
        Do not service any product except as explained in your system documentation.
        Opening or removing covers that are marked with the triangular symbol with a lightning bolt can expose you
         to electrical shock. Only a trained service technician should service components inside these
         compartments.
        Use the product only with approved equipment.
        Allow the products to cool before removing covers or touching internal components.
        To help avoid damaging your system, be sure that the voltage selection switch (if provided) on the power
         supply is set o match the power available at your location:
               o 110 volts (V), 60 hertz (Hz) in most of North and South America and some Far Eastern countries
                    such as south Korea and Taiwan
               o 100, 50 Hz in eastern Japan and 100, 60Hz in western Japan
               o 230v, 50Hz in most of Europe, the Middle East, and the Far East
        The peripheral power cables are equipped with three-prong plugs to help ensure proper grounding. Do not
         use adapter plugs or remove the grounding prong from a cable.
        Observe extension cable and power strip ratings. Make sure that the total ampere rating of all products
         plugged into the extension cable or power strip does not exceed 80 percent of the ampere ratings limit for
         the extension cable or power strip.
        To help protect your system from sudden, transient increases and decreases in electrical power, use a
         surge suppressor, line conditioner, or uninterruptible power supply (UPS).

NETGEAR Powerline products provide an alternative method to extend the network using existing electrical wiring. In
case of interference issues, please follow these guidelines:-

        Plug Powerline adapters into outlets away from cell phone chargers and cordless telephone basestations
        Ensure Powerline adapters are located away from equipment with a motor (e.g. fan, vacuum cleaner, etc.)
        Ensure Powerline adapters are located away from audio devices such as radio receivers




NETGEAR Notifications of Compliance               revised 9/11//2018                                          Page 27


Rack Mount Safety Instructions
This information applies to the installation of NETGEAR rack mount products

       Ambient operating temperature. If the switch is installed in a closed or multiunit rack assembly, the
        ambient operating temperature of the rack environment might be greater than the ambient temperature of
        the room. Therefore, consider installing the equipment in an environment compatible with the maximum
        rated ambient temperature.
       Reduced airflow. Mount the equipment into a rack so that the amount of airflow required for safe operation
        is not compromised.
       Mechanical loading. Mount the equipment into a rack so that a hazardous condition does not arise due to
        uneven mechanical loading.
       Circuit overloading. Consider the equipment’s connection to the power supply circuitry and the effect that
        any possible overloading of circuits might have on overcurrent protection and power supply wiring. Consider
        equipment nameplate ratings when addressing this concern.
       Reliable grounding. This product requires reliable grounding to be maintained at all times. To ensure this,
        ground the rack itself. Pay particular attention to power supply connections other than the direct connections
        to the branch circuit (for example, the use of power strips).
       Clearance. Leave enough clearance in front of the rack (about 25 inches) to enable you to open the front
        door completely and in the back of the rack (about 30 inches) to allow for sufficient airflow and ease in
        servicing.



Wall Mount Safety Instructions
This information applies to the installation of the NETGEAR wall mount products GSS108EPP and GS408EPP:

       Power supply cord must not be attached to the building surface, nor run through walls, ceilings, floors and
        similar openings in the building structure.



Power Over Ethernet (PoE) Safety Instructions
This information applies to the installation of the NETGEAR PoE product GS408EPP:

       The PoE product is to be connected only to PoE networks without routing to the outside plant.



                       NETGEAR, Inc., 350 E. Plumeria Avenue, San Jose, CA 95134 USA




NETGEAR Notifications of Compliance              revised 9/11//2018                                           Page 28



Document Created: 2018-09-11 21:43:50
Document Modified: 2018-09-11 21:43:50

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC