RF Exposure Report

FCC ID: PY318100406

RF Exposure Info

Download: PDF
FCCID_3939691

RF Exposure Report Report No.: SA180614E09 FCC ID: PY318100406 Test Model: Otter Received Date: June 14, 2018 Test Date: July 10 to 12, 2018 Issued Date: July 19, 2018 Applicant: NETGEAR, Inc. Address: 350 East Plumeria Drive San Jose, CA 95134 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. FCC Registration / 723255 / TW2022 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA180614E09 Page No. 1 / 7 Report Format Version: 6.1.1

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Antenna Gain ...................................................................................................................................... 6 2.5 Calculation Result ............................................................................................................................... 7 Report No.: SA180614E09 Page No. 2 / 7 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued SA180614E09 Original release. July 19, 2018 Report No.: SA180614E09 Page No. 3 / 7 Report Format Version: 6.1.1

1 Certificate of Conformity Product: WiFi Device Brand: NETGEAR Test Model: Otter Sample Status: ENGINEERING SAMPLE Applicant: NETGEAR, Inc. Test Date: July 10 to 12, 2018 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.1-1992 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: July 19, 2018 Phoenix Huang / Specialist Approved by : , Date: July 19, 2018 May Chen / Manager Report No.: SA180614E09 Page No. 4 / 7 Report Format Version: 6.1.1

2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time 2 (MHz) Strength (V/m) Strength (A/m) (mW/cm ) (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 2 1.34-30 824/f 2.19/f (180/f )* 30 30-300 27.5 0.073 0.2 30 300-1500 … … f/1500 30 1500-100,000 … … 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula 2 Pd = (Pout*G) / (4*pi*r ) where 2 Pd = power density in mW/cm Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 32cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA180614E09 Page No. 5 / 7 Report Format Version: 6.1.1

2.4 Antenna Gain For WLAN Ant. Gain (dBi) Antenna Frequency range Cable (include cable Antenna Type Connecter Type No. (GHz) Length (mm) loss) 3.46 2.4 ~ 2.4835 Dual band 2.99 5.15~5.25 Dipole i-pex(MHF) 214 (Black) 2.99 5.25~5.35 2.73 2.4 ~ 2.4835 Dual band 2.44 5.15~5.25 Dipole i-pex(MHF) 156 (Red) 2.44 5.25~5.35 5G Antenna 3.31 5.47~5.725 Dipole i-pex(MHF) 125 (Blue) 2.65 5.725~5.85 5G Antenna 2.26 5.47~5.725 (Yellow) Dipole i-pex(MHF) 70 3.24 5.725~5.85 For Bluetooth Ant. Gain (dBi) Antenna Frequency range Cable (include cable Antenna Type Connecter Type No. (GHz) Length (mm) loss) Antenna 3.32 2.4 ~ 2.5 PIFA i-pex(MHF) 200 (White) Report No.: SA180614E09 Page No. 6 / 7 Report Format Version: 6.1.1

2.5 Calculation Result Evaluation Operation Max Power Antenna Gain Distance Power Density Limit Frequency 2 2 Mode (mW) (dBi) (cm) (mW/cm ) (mW/cm ) (MHz) WLAN 2.4GHz 2437 989.7 6.11 32 0.31405 1 WLAN 5GHz 5200 907.203 5.73 32 0.26375 1 (UNII-1) WLAN 5GHz 5795 936.671 5.96 32 0.28713 1 (UNII-3) Bluetooth 2480 7.568 3.32 32 0.00126 1 Note: Chain0/20 Chain1/20 2 2.4GHz: Directional gain = 10 log[(10 + 10 ) / 2] = 6.11dBi 5GHz: Chain0/20 Chain1/20 2 UNII-1: Directional gain = 10 log[(10 + 10 ) / 2] = 5.73dBi Chain0/20 Chain1/20 2 UNII-3: Directional gain = 10 log[(10 + 10 ) / 2] = 5.96dBi Conclusion: The formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1 CPD = Calculation power density LPD = Limit of power density WLAN 2.4GHz + WLAN 5GHz (UNII-1) + WLAN 5GHz (UNII-3) + Bluetooth = 0.31405 / 1 + 0.26375 / 1 + 0.28713 /1 + 0.00126 / 1 = 0.86619 Therefore the maximum calculations of above situations are less than the “1” limit. --- END --- Report No.: SA180614E09 Page No. 7 / 7 Report Format Version: 6.1.1


Document Created: 2018-07-26 14:43:13
Document Modified: 2018-07-26 14:43:13
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC