RF Test Report- (co-located)

FCC ID: PY318100406

Test Report

Download: PDF
FCCID_3939623

Supplemental “Transmit Simultaneously” Test Report Report No.: RF180614E09-4 FCC ID: PY318100406 Test Model: Otter Received Date: June 14, 2018 Test Date: June 29 to July 07, 2018 Issued Date: July 19, 2018 Applicant: NETGEAR, Inc. Address: 350 East Plumeria Drive San Jose, CA 95134 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. FCC Registration / 723255 / TW2022 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF180614E09-4 Page No. 1 / 28 Report Format Version: 6.1.2 Reference No.:

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.1.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.2 Description of Support Units .............................................................................................................. 11 3.2.1 Configuration of System under Test ................................................................................................... 11 4 Test Types and Results ...................................................................................................................... 12 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 12 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 12 4.1.2 Test Instruments ................................................................................................................................ 13 4.1.3 Test Procedures ................................................................................................................................. 14 4.1.4 Deviation from Test Standard ............................................................................................................ 14 4.1.5 Test Setup .......................................................................................................................................... 15 4.1.6 EUT Operating Conditions................................................................................................................. 16 4.1.7 Test Results ....................................................................................................................................... 17 4.2 Conducted Emission Measurement .................................................................................................. 19 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 19 4.2.2 Test Instruments ................................................................................................................................ 19 4.2.3 Test Procedures ................................................................................................................................. 20 4.2.4 Deviation from Test Standard ............................................................................................................ 20 4.2.5 Test Setup .......................................................................................................................................... 20 4.2.6 EUT Operating Conditions................................................................................................................. 20 4.2.7 Test Results (Mode 1)........................................................................................................................ 21 4.2.8 Test Results (Mode 2)........................................................................................................................ 23 4.3 Conducted Out of Band Emission Measurement .............................................................................. 25 4.3.1 Limits of Conducted Out of Band Emission Measurement................................................................ 25 4.3.2 Test Setup .......................................................................................................................................... 25 4.3.3 Test Instruments ................................................................................................................................ 25 4.3.4 Test Procedures ................................................................................................................................. 25 4.3.5 Deviation from Test Standard ............................................................................................................ 25 4.3.6 EUT Operating Conditions................................................................................................................. 25 4.3.7 Test Results ....................................................................................................................................... 25 5 Pictures of Test Arrangements .......................................................................................................... 27 Appendix – Information on the Testing Laboratories ................................................................................ 28 Report No.: RF180614E09-4 Page No. 2 / 28 Report Format Version: 6.1.2 Reference No.:

Release Control Record Issue No. Description Date Issued RF180614E09-4 Original release. July 19, 2018 Report No.: RF180614E09-4 Page No. 3 / 28 Report Format Version: 6.1.2 Reference No.:

1 Certificate of Conformity Product: WiFi Device Brand: NETGEAR Test Model: Otter Sample Status: ENGINEERING SAMPLE Applicant: NETGEAR, Inc. Test Date: June 29 to July 07, 2018 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) 47 CFR FCC Part 15, Subpart E (Section 15.407) ANSI C63.10: 2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: July 19, 2018 Phoenix Huang / Specialist Approved by : , Date: July 19, 2018 May Chen / Manager Report No.: RF180614E09-4 Page No. 4 / 28 Report Format Version: 6.1.2 Reference No.:

C Eooert venitas 2 Summary of Test Results 47 CFR FCC Part 15, Subpart C, E (SECTION 15.247, 15.407) FCC Test Item Result Remarks Clause 15.207 Meet the requirement of limit. 5.20 AC Power Conducted PASS Minimum passing margin is —21.65dB 15.407(b)(6) Emission at 12 19141MHz. 15.205 / 15.209 / 15.247 at : E feai d Band Meet the requirement of limit. 5 (d) adlaév‘ajd Hsswns an t an PASS Minimum passing margin is —0.90B at 15.407(b) ge Measuremen 4874.00MHz. (1/2/3/4(i/ii}6) 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16—4—2: Expanded Uncertainty Measurement Frequency (k—2) (©) Conducted Emissions at mains ports 150kHz ~ 30MHz 1.84 dB Radiated Emissions up to 1 GHz 30MHz ~ 1GHz 5.53 dB 1GHz ~ 6GHz 5.08 dB Radiated Emissions above 1 GHz 6GHz ~ 18GHz 4.98 dB 18GHz ~ 40GHz 5.19 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF180614E09—4 Page No. 5 / 28 Report Format Version: 6.1.2

3 General Information 3.1 General Description of EUT Product WiFi Device Brand NETGEAR Test Model Otter Status of EUT ENGINEERING SAMPLE Power Supply Rating 19Vdc from power adapter WLAN: CCK, DQPSK, DBPSK for DSSS 64QAM, 16QAM, QPSK, BPSK for OFDM Modulation Type 256QAM for OFDM in 11ac mode only BT-EDR: GFSK, π/4-DQPSK, 8DPSK BT-LE: GFSK WLAN: DSSS,OFDM Modulation Technology BT-EDR: FHSS BT-LE: DTS WLAN: 802.11b: up to 11Mbps 802.11a/g: up to 54Mbps Transfer Rate 802.11n: up to 600Mbps 802.11ac: up to 866.7Mbps BT-EDR: up to 3Mbps BT-LE: up to 1Mbps WLAN: 2.4GHz: 2.412 ~ 2.462GHz Operating Frequency 5GHz: 5.18~ 5.24GHz, 5.745 ~ 5.825GHz BT-EDR: 2.402 ~ 2.480GHz BT-LE: 2.402 ~ 2.480GHz WLAN: 2.4GHz: 802.11b, 802.11g, 802.11n (HT20): 11 802.11n (HT40): 7 5GHz: Number of Channel 802.11a, 802.11n (HT20), 802.11ac (VHT20): 9 802.11n (HT40), 802.11ac (VHT40): 4 802.11ac (VHT80): 2 BT-EDR: 79 BT-LE: 40 Antenna Type Refer to Note Antenna Connector Refer to Note Accessory Device Adapter x1 Data Cable Supplied NA Report No.: RF180614E09-4 Page No. 6 / 28 Report Format Version: 6.1.2 Reference No.:

Note: 1. There are WLAN and Bluetooth technology used for the EUT. The EUT has below radios as following table: Radio 1 Radio 2 Radio 3 WLAN (2.4GHz) + WLAN (5GHz HB) WLAN (5GHz LB) Bluetooth 2. Simultaneously transmission condition. Condition Technology 1 WLAN (2.4GHz) + WLAN (5GHz) + Bluetooth 3. The EUT could be supplied from a power adapter as following table: No. Brand Model No. P/N Spec. Input: 100-120Vac, 1.5A, 50/60Hz 1 NETGEAR AD2003F10 332-11039-01 Output: 19V, 3.16A DC output cable (unshielded, 1.8m) Input: 100-120Vac, 1.7A, 50/60Hz 2 NETGEAR 2ABS060K 1 NJ 332-11043-01 Output: 19V, 3.16A DC output cable (unshielded, 1.8m) Note: From the above models, the worst radiated emission test was found in Adapter 2. Therefore only the test data of the modes were recorded in this report. 4. The antennas provided to the EUT, please refer to the following table: For WLAN Ant. Gain (dBi) Antenna Frequency range Cable (include cable Antenna Type Connecter Type No. (GHz) Length (mm) loss) 3.46 2.4 ~ 2.4835 Dual band 2.99 5.15~5.25 Dipole i-pex(MHF) 214 (Black) 2.99 5.25~5.35 2.73 2.4 ~ 2.4835 Dual band 2.44 5.15~5.25 Dipole i-pex(MHF) 156 (Red) 2.44 5.25~5.35 5G Antenna 3.31 5.47~5.725 Dipole i-pex(MHF) 125 (Blue) 2.65 5.725~5.85 5G Antenna 2.26 5.47~5.725 (Yellow) Dipole i-pex(MHF) 70 3.24 5.725~5.85 For Bluetooth Ant. Gain (dBi) Antenna Frequency range Cable (include cable Antenna Type Connecter Type No. (GHz) Length (mm) loss) Antenna 3.32 2.4 ~ 2.5 PIFA i-pex(MHF) 200 (White) Report No.: RF180614E09-4 Page No. 7 / 28 Report Format Version: 6.1.2 Reference No.:

5. The EUT incorporates a MIMO function. 2.4GHz Band MODULATION MODE DATA RATE (MCS) TX & RX CONFIGURATION 802.11b 1 ~ 11Mbps 2TX 2RX 802.11g 6 ~ 54Mbps 2TX 2RX MCS 0~7 2TX 2RX 802.11n (HT20) MCS 8~15 2TX 2RX MCS 0~7 2TX 2RX 802.11n (HT40) MCS 8~15 2TX 2RX 5GHz Band MODULATION MODE DATA RATE (MCS) TX & RX CONFIGURATION 802.11a 6 ~ 54Mbps 2TX 2RX MCS 0~7 2TX 2RX 802.11n (HT20) MCS 8~15 2TX 2RX MCS 0~7 2TX 2RX 802.11n (HT40) MCS 8~15 2TX 2RX MCS0~8 Nss=1 2TX 2RX 802.11ac (VHT20) MCS0~8 Nss=2 2TX 2RX MCS0~9 Nss=1 2TX 2RX 802.11ac (VHT40) MCS0~9 Nss=2 2TX 2RX MCS0~9 Nss=1 2TX 2RX 802.11ac (VHT80) MCS0~9 Nss=2 2TX 2RX Note: All of modulation mode support beamforming function except 802.11a/b/g modulation mode. 6. The above EUT information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. Report No.: RF180614E09-4 Page No. 8 / 28 Report Format Version: 6.1.2 Reference No.:

3.1.1 Test Mode Applicability and Tested Channel Detail EUT Applicable To Configure Description Mode RE1G RE<1G PLC OB 1 √ √ √ √ With Adapter 2 2 - - √ - With Adapter 1 Where RE1G: Radiated Emission above 1GHz RE<1G: Radiated Emission below 1GHz PLC: Power Line Conducted Emission OB: Conducted Out-Band Emission Measurement Note: “-”means no effect. Radiated Emission Test (Above 1GHz): Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION MODULATION MODE CHANNEL CHANNEL TECHNOLOGY TYPE 802.11b 1 to 11 6 OFDMA BPSK + 802.11a 36 to 48 40 OFDMA BPSK + 802.11ac (VHT40) 149 to 165 159 OFDM BPSK + BT-LE 0 to 39 39 DTS GFSK Radiated Emission Test (Below 1GHz): Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION MODULATION MODE CHANNEL CHANNEL TECHNOLOGY TYPE 802.11b 1 to 11 6 OFDMA BPSK + 802.11a 36 to 48 40 OFDMA BPSK + 802.11ac (VHT40) 149 to 165 159 OFDM BPSK + BT-LE 0 to 39 39 DTS GFSK Power Line Conducted Emission Test: Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION MODULATION MODE CHANNEL CHANNEL TECHNOLOGY TYPE 802.11b 1 to 11 6 OFDMA BPSK + 802.11a 36 to 48 40 OFDMA BPSK + 802.11ac (VHT40) 149 to 165 159 OFDM BPSK + BT-LE 0 to 39 39 DTS GFSK Report No.: RF180614E09-4 Page No. 9 / 28 Report Format Version: 6.1.2 Reference No.:

Conducted Out-Band Emission Measurement: Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION MODULATION MODE CHANNEL CHANNEL TECHNOLOGY TYPE 802.11b 1 to 11 6 OFDMA BPSK + 802.11a 36 to 48 40 OFDMA BPSK Test Condition: Applicable To Environmental Conditions Input Power Tested By RE1G 22deg. C, 67%RH 120Vac, 60Hz Andy Ho RE<1G 22deg. C, 68%RH 120Vac, 60Hz Andy Ho 25deg. C, 75%RH PLC 120Vac, 60Hz Andy Ho 23deg. C, 74%RH OB 21deg. C, 60%RH 120Vac, 60Hz Nick Chen Report No.: RF180614E09-4 Page No. 10 / 28 Report Format Version: 6.1.2 Reference No.:

Eooert venitas 3.2 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Product Brand Model No. Serial No. ECC ID Remarks A. Laptop DELL E6420 B92T3R1 FCC DoC Provided by Lab Note: 1. All power cords of the above support units are non—shielded (1.8m). Shieldin ID Descriptions Qiy. Length (m) (Yes/No? Cores (Qty.) Remarks 1. RJ—45 Cable 1 10 No Provided by Lab 2. DC Cable 1 1.8 No Supplied by client 3.2.1 Configuration of System under Test EUT (2) Adapter } Ethemnet 1 ; (1) Remote Site (A) Laptop Report No.: RF180614E09—4 Page No. 11 / 28 Report Format Version: 6.1.2

C Eooert venitas 4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Fre(q'\LAer;;;ies (mifgjvz;r;;g;g 1 Measurement Distance (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~216 150 3 216 ~ 960 200 3 Above 960 500 3 Note: The lower limit shall apply at the transition frequencies. Emission level (dBuV/m) = 20 log Emission level (uV/m). For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Limits of unwanted emission out of the restricted bands Applicable To Limit 789033 DO2 General UNIl Test Procedure Field Strength at 3m New Rules v02r01 PK:74 (dBuV/m) AV:54 (dBuV/m) Equivalent Field Strength at Frequency Band Applicable To EIRP Limit 3m 5150~5250 MHz 15.407(b)(1) 5250~5350 MHz 15.407(b)(2) PK:—27 (dBm/MHz) PK:68.2(dBuV/im) 5470~5725 MHz 15.407(b)(3) PK=27 (dBm/MHz) 2‘ PK: 68.2(dBuV/m) 12 . PK:10 (dBm/MHz) * PK:105.2 (dBuV/m) 5725~5850 MHz B 15.407(b)(4)() PK15.6 (dBm/MHz) * PK: 110.8(dBuVim) PK:27 (dBm/MHz) * PK:122.2 (dBuV/im) * C 15.407(b)(4)(ii) Emission limits in section 15.247(d) * below the band edge increasing linearly to 10 "‘ beyond 75 MHz or more above of the band edge. dBm/MHz at 25 MHz above. * below the band edge increasing linearly to a level * from 5 MHz above or below the band edge of 15.6 dBm/MHz at 5 MHz above. increasing linearly to a level of 27 dBm/MHz at the band edge. Note: The following formula is used to convert the equipment isotropic radiated power (eirp) to field strength: 1000000Y/30P uV/m, where P is the eirp (Waits). 3 Report No.: RF180614E09—4 Page No. 12 /28 Report Format Version: 6.1.2

4.1.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver N9038A MY50010156 July 12, 2017 July 11, 2018 Agilent Pre-Amplifier EMC001340 980142 Feb. 09, 2018 Feb. 08, 2019 EMCI (*) Loop Antenna EM-6879 264 Dec. 16, 2016 Dec. 15, 2018 Electro-Metrics LOOPCAB-001 RF Cable NA Jan. 15, 2018 Jan. 14, 2019 LOOPCAB-002 Pre-Amplifier ZFL-1000VH2B AMP-ZFL-05 May 05, 2018 May 04, 2019 Mini-Circuits Trilog Broadband Antenna VULB 9168 9168-361 Nov. 29, 2017 Nov. 28, 2018 SCHWARZBECK 966-3-1 RF Cable 8D 966-3-2 Mar. 20, 2018 Mar. 19, 2019 966-3-3 Fixed attenuator UNAT-5+ PAD-3m-3-01 Oct. 03, 2017 Oct. 02, 2018 Mini-Circuits Horn_Antenna BBHA9120-D 9120D-406 Dec. 12, 2017 Dec. 11, 2018 SCHWARZBECK Pre-Amplifier EMC12630SE 980384 Jan. 29, 2018 Jan. 28, 2019 EMCI EMC104-SM-SM-1200 160922 RF Cable EMC104-SM-SM-2000 150317 Jan. 29, 2018 Jan. 28, 2019 EMC104-SM-SM-5000 150322 Spectrum Analyzer N9030A MY54490679 July 25, 2017 July 24, 2018 Keysight Pre-Amplifier EMC184045SE 980386 Jan. 29, 2018 Jan. 28, 2019 EMCI Horn_Antenna BBHA 9170 BBHA9170608 Dec. 14, 2017 Dec. 13, 2018 SCHWARZBECK RF Cable EMC102-KM-KM-1200 160924 Jan. 29, 2018 Jan. 28, 2019 Software ADT_Radiated_V8.7.08 NA NA NA Antenna Tower & Turn Table MF-7802 MF780208406 NA NA Max-Full Boresight Antenna Fixture FBA-01 FBA-SIP01 NA NA Note: emission 7/04-7/7 power-7/12 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. *The calibration interval of the above test instruments is 24 months and the calibrations are traceable to NML/ROC and NIST/USA. 3. The test was performed in 966 Chamber No. 3. 4. The CANADA Site Registration No. is 20331-1 5. Loop antenna was used for all emissions below 30 MHz. 6. Tested Date: July 04 to 07, 2018 Report No.: RF180614E09-4 Page No. 13 / 28 Report Format Version: 6.1.2 Reference No.:

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Parallel, perpendicular, and ground-parallel orientations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detects function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is ≥ 1/T (Duty cycle < 98%) or 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF180614E09-4 Page No. 14 / 28 Report Format Version: 6.1.2 Reference No.:

4.1.5 Test Setup For Radiated emission below 30MHz 1m EUT& 3m Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable 3m 10m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF180614E09-4 Page No. 15 / 28 Report Format Version: 6.1.2 Reference No.:

For Radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions a. Connected the EUT with the Laptop which is placed on remote site. b. Controlling software (WiFi: QDART-Connectivity (1.0.40) / BT: telnet pasted BT.txt command) has been activated to set the EUT on specific status. Report No.: RF180614E09-4 Page No. 16 / 28 Report Format Version: 6.1.2 Reference No.:

4.1.7 Test Results Above 1GHz Data DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 40GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 4874.00 51.4 PK 74.0 -22.6 2.76 H 146 49.8 1.6 2 4874.00 49.8 AV 54.0 -4.2 2.76 H 146 48.2 1.6 3 4960.00 40.3 PK 74.0 -33.7 1.33 H 61 38.4 1.9 4 4960.00 33.5 AV 54.0 -20.5 1.33 H 61 31.6 1.9 5 7311.00 52.2 PK 74.0 -21.8 1.43 H 273 44.5 7.7 6 7311.00 48.3 AV 54.0 -5.7 1.43 H 273 40.6 7.7 7 7440.00 50.1 PK 74.0 -23.9 1.94 H 38 42.2 7.9 8 7440.00 41.9 AV 54.0 -12.1 1.94 H 38 34.0 7.9 9 #10400.00 48.3 PK 74.0 -25.7 1.56 H 200 36.1 12.2 10 #10400.00 36.0 AV 54.0 -18.0 1.56 H 200 23.8 12.2 11 11590.00 51.3 PK 74.0 -22.7 1.01 H 252 38.9 12.4 12 11590.00 39.8 AV 54.0 -14.2 1.01 H 252 27.4 12.4 13 15600.00 48.4 PK 74.0 -25.6 1.55 H 218 35.5 12.9 14 15600.00 37.3 AV 54.0 -16.7 1.55 H 218 24.4 12.9 15 #17385.00 55.6 PK 74.0 -18.4 1.37 H 181 39.4 16.2 16 #17385.00 43.1 AV 54.0 -10.9 1.37 H 181 26.9 16.2 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 4874.00 54.5 PK 74.0 -19.5 1.43 V 159 52.9 1.6 2 4874.00 53.1 AV 54.0 -0.9 1.43 V 159 51.5 1.6 3 4960.00 45.6 PK 74.0 -28.4 1.80 V 156 43.7 1.9 4 4960.00 37.7 AV 54.0 -16.3 1.80 V 156 35.8 1.9 5 7311.00 55.9 PK 74.0 -18.1 1.32 V 207 48.2 7.7 6 7311.00 52.3 AV 54.0 -1.7 1.32 V 207 44.6 7.7 7 7440.00 51.9 PK 74.0 -22.1 1.27 V 174 44.0 7.9 8 7440.00 43.4 AV 54.0 -10.6 1.27 V 174 35.5 7.9 9 #10400.00 46.3 PK 74.0 -27.7 1.45 V 148 34.1 12.2 10 #10400.00 35.0 AV 54.0 -19.0 1.45 V 148 22.8 12.2 11 11590.00 50.1 PK 74.0 -23.9 1.70 V 85 37.7 12.4 12 11590.00 38.8 AV 54.0 -15.2 1.70 V 85 26.4 12.4 13 15600.00 47.3 PK 74.0 -26.7 1.54 V 228 34.4 12.9 14 15600.00 36.0 AV 54.0 -18.0 1.54 V 228 23.1 12.9 15 #17385.00 54.4 PK 74.0 -19.6 1.48 V 162 38.2 16.2 16 #17385.00 40.8 AV 54.0 -13.2 1.48 V 162 24.6 16.2 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " # ": The radiated frequency is out of the restricted band. Report No.: RF180614E09-4 Page No. 17 / 28 Report Format Version: 6.1.2 Reference No.:

Below 1GHz Data: DETECTOR FREQUENCY RANGE 9kHz ~ 1GHz Quasi-Peak (QP) FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 125.05 38.4 QP 43.5 -5.1 2.40 H 171 47.7 -9.3 2 270.33 32.6 QP 46.0 -13.4 3.00 H 141 40.6 -8.0 3 466.50 37.6 QP 46.0 -8.4 2.43 H 226 40.3 -2.7 4 570.30 33.8 QP 46.0 -12.2 1.50 H 264 34.5 -0.7 5 760.01 26.9 QP 46.0 -19.1 1.50 H 291 23.5 3.4 6 780.01 27.9 QP 46.0 -18.1 1.50 H 238 24.2 3.7 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 38.22 29.4 QP 40.0 -10.6 1.00 V 331 37.9 -8.5 2 270.30 41.2 QP 46.0 -4.8 1.00 V 56 49.2 -8.0 3 344.26 39.3 QP 46.0 -6.7 1.10 V 241 45.1 -5.8 4 491.72 41.3 QP 46.0 -4.7 1.24 V 59 43.5 -2.2 5 760.00 42.1 QP 46.0 -3.9 1.52 V 271 38.7 3.4 6 766.66 33.4 QP 46.0 -12.6 1.42 V 73 29.8 3.6 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF180614E09-4 Page No. 18 / 28 Report Format Version: 6.1.2 Reference No.:

4.2 Conducted Emission Measurement 4.2.1 Limits of Conducted Emission Measurement Conducted Limit (dBuV) Frequency (MHz) Quasi-peak Average 0.15 - 0.5 66 - 56 56 - 46 0.50 - 5.0 56 46 5.0 - 30.0 60 50 Note: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 4.2.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver ESCS 30 847124/029 Nov. 01, 2017 Oct. 31, 2018 R&S Line-Impedance Stabilization Network (for ESH3-Z5 848773/004 Nov. 15, 2017 Nov. 14, 2018 EUT) R&S Line-Impedance Stabilization Network ENV216 100072 June 04, 2018 June 03, 2019 (for Peripheral) R&S 50 ohms Terminator N/A EMC-02 Sep. 22, 2017 Sep. 21, 2018 RF Cable 5D-FB COCCAB-001 Sep. 29, 2017 Sep. 28, 2018 Fixed attenuator STI02-2200-10 003 Mar. 16, 2018 Mar. 15, 2019 EMCI Software BVADT_Cond_ NA NA NA BVADT V7.3.7.4 Note: 1. The calibration interval of the above test instruments are 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Conduction 1. 3. Tested Date: June 29 to July 04, 2018 Report No.: RF180614E09-4 Page No. 19 / 28 Report Format Version: 6.1.2 Reference No.:

uces venitas 4.2.3 Test Procedures a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit — 20dB) was not recorded. NOTE: The resolution bandwidth and video bandwidth of test receiver is 9kHz for quasi—peak detection (QP) and average detection (AV) at frequency 0.15MHz—30MHz. 4.2.4 Deviation from Test Standard No deviation. 4.2.5 Test Setup Vertical Ground Reference Plane Test Receiver ~<oa———m L___JI Gooe 40cm EUT i*~~l5 a o 0 80cm |LISN L1 L1 L1 \ N Horizonta T l Ground Reference Plane Note: 1.Support units were connected to second LISN. For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.2.6 EUT Operating Conditions Same as 4.1.6. Report No.: RF180614E09—4 Page No. 20 / 28 Report Format Version: 6.1.2

4.2.7 Test Results (Mode 1) Quasi-Peak (QP) / Phase Line (L) Detector Function Average (AV) Phase Of Power : Line (L) Frequency Correction Reading Value Emission Level Limit Margin No Factor (dBuV) (dBuV) (dBuV) (dB) (MHz) (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15000 10.05 28.96 10.34 39.01 20.39 66.00 56.00 -26.99 -35.61 2 0.21641 10.07 22.63 7.62 32.70 17.69 62.96 52.96 -30.26 -35.27 3 0.32969 10.10 23.84 13.10 33.94 23.20 59.46 49.46 -25.52 -26.26 4 0.91563 10.16 10.30 2.67 20.46 12.83 56.00 46.00 -35.54 -33.17 5 11.26563 10.80 9.27 -1.20 20.07 9.60 60.00 50.00 -39.93 -40.40 6 22.64063 11.43 11.43 5.57 22.86 17.00 60.00 50.00 -37.14 -33.00 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level – Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF180614E09-4 Page No. 21 / 28 Report Format Version: 6.1.2 Reference No.:

Quasi-Peak (QP) / Phase Neutral (N) Detector Function Average (AV) Phase Of Power : Neutral (N) Frequency Correction Reading Value Emission Level Limit Margin No Factor (dBuV) (dBuV) (dBuV) (dB) (MHz) (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15000 9.95 29.01 10.28 38.96 20.23 66.00 56.00 -27.04 -35.77 2 0.19297 9.97 26.52 9.94 36.49 19.91 63.91 53.91 -27.42 -34.00 3 0.32969 10.00 23.72 13.32 33.72 23.32 59.46 49.46 -25.74 -26.14 4 0.97031 10.04 9.74 2.43 19.78 12.47 56.00 46.00 -36.22 -33.53 5 11.00000 10.60 11.09 1.04 21.69 11.64 60.00 50.00 -38.31 -38.36 6 27.16797 11.26 11.20 4.43 22.46 15.69 60.00 50.00 -37.54 -34.31 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level – Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF180614E09-4 Page No. 22 / 28 Report Format Version: 6.1.2 Reference No.:

4.2.8 Test Results (Mode 2) Quasi-Peak (QP) / Phase Line (L) Detector Function Average (AV) Phase Of Power : Line (L) Frequency Correction Reading Value Emission Level Limit Margin No Factor (dBuV) (dBuV) (dBuV) (dB) (MHz) (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15000 10.05 28.20 10.75 38.25 20.80 66.00 56.00 -27.75 -35.20 2 0.15781 10.05 30.21 15.16 40.26 25.21 65.58 55.58 -25.32 -30.37 3 0.51328 10.13 19.30 10.57 29.43 20.70 56.00 46.00 -26.57 -25.30 4 3.94922 10.34 20.66 12.22 31.00 22.56 56.00 46.00 -25.00 -23.44 5 8.67188 10.63 23.69 17.48 34.32 28.11 60.00 50.00 -25.68 -21.89 6 12.48438 10.88 22.86 17.33 33.74 28.21 60.00 50.00 -26.26 -21.79 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level – Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF180614E09-4 Page No. 23 / 28 Report Format Version: 6.1.2 Reference No.:

Quasi-Peak (QP) / Phase Neutral (N) Detector Function Average (AV) Phase Of Power : Neutral (N) Frequency Correction Reading Value Emission Level Limit Margin No Factor (dBuV) (dBuV) (dBuV) (dB) (MHz) (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15781 9.96 30.55 13.19 40.51 23.15 65.58 55.58 -25.07 -32.43 2 0.51719 10.02 20.08 11.48 30.10 21.50 56.00 46.00 -25.90 -24.50 3 2.03125 10.10 17.28 11.55 27.38 21.65 56.00 46.00 -28.62 -24.35 4 8.70313 10.46 23.42 17.78 33.88 28.24 60.00 50.00 -26.12 -21.76 5 12.19141 10.68 23.17 17.67 33.85 28.35 60.00 50.00 -26.15 -21.65 6 17.08984 10.99 22.31 16.79 33.30 27.78 60.00 50.00 -26.70 -22.22 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level – Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF180614E09-4 Page No. 24 / 28 Report Format Version: 6.1.2 Reference No.:

4.3 Conducted Out of Band Emission Measurement 4.3.1 Limits of Conducted Out of Band Emission Measurement Below 30dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.3.2 Test Setup Spectrum EUT Attenuator Analyzer 4.3.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.3.4 Test Procedures MEASUREMENT PROCEDURE REF 1. Set the RBW = 100 kHz. 2. Set the VBW ≥ 300 kHz. 3. Detector = peak. 4. Sweep time = auto couple. 5. Trace mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. MEASUREMENT PROCEDURE OOBE 1. Set RBW = 100 kHz. 2. Set VBW ≥ 300 kHz. 3. Detector = peak. 4. Sweep = auto couple. 5. Trace Mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum amplitude level. 4.3.5 Deviation from Test Standard No deviation. 4.3.6 EUT Operating Conditions The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. 4.3.7 Test Results The spectrum plots are attached on the following pages. D1 line indicates the highest level, and D2 line indicates the 30dB offset below D1. It shows compliance with the requirement. Report No.: RF180614E09-4 Page No. 25 / 28 Report Format Version: 6.1.2 Reference No.:

2.4GHz_802.11b CH6+5GHz_802.11a CH40 Chain 0 Chain 1 Report No.: RF180614E09-4 Page No. 26 / 28 Report Format Version: 6.1.2 Reference No.:

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF180614E09-4 Page No. 27 / 28 Report Format Version: 6.1.2 Reference No.:

Appendix – Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF180614E09-4 Page No. 28 / 28 Report Format Version: 6.1.2 Reference No.:


Document Created: 2018-07-26 14:42:35
Document Modified: 2018-07-26 14:42:35
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC