MPE Report

FCC ID: PY317400404

RF Exposure Info

Download: PDF
FCCID_3762170

RF Exposure Report Report No.: SA161229C25F FCC ID: PY317400404 Test Model: RBR40 Series Model: RBS40 Received Date: Dec. 22, 2016 Test Date: Dec. 22, 2016 ~ Jan. 25, 2017 Issued Date: Feb. 02, 2018 Applicant: NETGEAR, INC. Address: 350 East Plumeria Drive San Jose, CA 95134 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA161229C25F Page No. 1 / 6 Report Format Version: 6.1.1 Reference No.: 161229C25, 180122C16

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 3 Calculation Result of Maximum Conducted Power........................................................................... 6 Report No.: SA161229C25F Page No. 2 / 6 Report Format Version: 6.1.1 Reference No.: 161229C25, 180122C16

Release Control Record Issue No. Description Date Issued SA161229C25F Original release. Feb. 02, 2018 Report No.: SA161229C25F Page No. 3 / 6 Report Format Version: 6.1.1 Reference No.: 161229C25, 180122C16

1 Certificate of Conformity Product: Orbi Router, Orbi Satellite Brand: NETGEAR Test Model: RBR40 Series Model: RBS40 Sample Status: Engineering sample Applicant: NETGEAR, INC. Test Date: Dec. 22, 2016 ~ Jan. 25, 2017 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D01 (October 23, 2015) IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Feb. 02, 2018 Pettie Chen / Senior Specialist Approved by : , Date: Feb. 02, 2018 Bruce Chen / Project Engineer Note: All models are electrically identical except software firmware. Model: RBR40 is the representative for final test. Product Brand Model Function Band RF Module Difference Name Orbi 2.4G/ UNII-3 Module 1 1. Master mode only RBR40 Router Router UNII-1 Module 2 2. With internet function NETGEAR Master mode and Client mode for 2.4GHz Orbi 2.4G/ UNII-3 Module 1 RBS40 Satellite Client mode for UNII-3 Satellite UNII-1 Module 2 Master mode only for UNII-1 *RBK40= RBR40 + RBS40 Report No.: SA161229C25F Page No. 4 / 6 Report Format Version: 6.1.1 Reference No.: 161229C25, 180122C16

2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time (MHz) Strength (V/m) Strength (A/m) (mW/cm2) (minutes) Limits For General Population / Uncontrolled Exposure 300-1500 … … F/1500 30 1500-100,000 … … 1.0 30 F = Frequency in MHz 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 31cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA161229C25F Page No. 5 / 6 Report Format Version: 6.1.1 Reference No.: 161229C25, 180122C16

3 Calculation Result of Maximum Conducted Power Frequency Band Max Power Antenna Gain Power Density Distance (cm) Limit (mW/cm2) (MHz) (dBm) (dBi) (mW/cm2) WLAN CDD Mode 2412-2462 29.86 5.75 31 0.301 1 5180-5240 29.41 6.62 31 0.332 1 5745-5825 29.45 6.70 31 0.341 1 Beamforming Mode 2412-2462 29.64 5.75 31 0.286 1 5180-5240 29.32 6.62 31 0.325 1 5745-5825 29.25 6.70 31 0.326 1 Note: 2.4GHz: Directional gain = 10 log[(10G1 /20 + 10G2 /20 + ... + 10GN /20)2/2]= 5.75dBi 5.0GHz: For U-NII-1: Directional gain = 10 log[(10G1 /20 + 10G2 /20 + ... + 10GN /20)2/2]= 6.62dBi For U-NII-3: Directional gain = 10 log[(10G1 /20 + 10G2 /20 + ... + 10GN /20)2/2]= 6.70dBi Conclusion: The formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1 CPD = Calculation power density LPD = Limit of power density The simultaneous operation mode was determined by client. No Mode 1 WLAN 2.4GHz + WLAN 5GHz B1 2 WLAN 2.4GHz + WLAN 5GHz B4 3 WLAN 5GHz B1+ WLAN 5GHz B4 4 WLAN 2.4GHz + WLAN 5GHz B1+ WLAN 5GHz B4 1. WLAN 2.4GHz + WLAN 5GHz B1 = 0.301 + 0.332 = 0.633 2. WLAN 2.4GHz + WLAN 5GHz B4 = 0.301 + 0.341 = 0.642 3. WLAN 5GHz B1+ WLAN 5GHz B4 = 0.332 + 0.341 = 0.673 4. WLAN 2.4GHz + WLAN 5GHz B1+ WLAN 5GHz B4 = 0.301 + 0.332 + 0.341 = 0.974 Therefore all the maximum calculations of above situations are less than the “1” limit. --- END --- Report No.: SA161229C25F Page No. 6 / 6 Report Format Version: 6.1.1 Reference No.: 161229C25, 180122C16


Document Created: 2018-02-27 08:14:48
Document Modified: 2018-02-27 08:14:48
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC