Test Report (Co-located)

FCC ID: PY317300393

Test Report

Download: PDF
FCCID_3562532

FCC Test Report (Co-Located) Report No.: RF170906C12-3 FCC ID: PY317300393 Test Model: RBR20 Series Model: RBS20 (Refer to item 3.1 for more details) Received Date: Aug. 25, 2017 Test Date: Sep. 06 ~ Sep. 07, 2017 Issued Date: Sep. 07, 2017 Applicant: NETGEAR, INC. Address: 350 East Plumeria Drive San Jose, CA 95134 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF170906C12-3 Page No. 1 / 34 Report Format Version: 6.1.1

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Test Modes ................................................................................................................. 10 3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................... 12 3.3 Description of Support Units ............................................................................................................. 14 3.3.1 Configuration of System under Test .................................................................................................. 14 3.4 General Description of Applied Standards ........................................................................................ 14 4 Test Types and Results ...................................................................................................................... 15 4.1 Radiated Emission and Bandedge Measurement............................................................................. 15 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 15 4.1.2 Test Instruments ................................................................................................................................ 16 4.1.3 Test Procedures................................................................................................................................. 17 4.1.4 Deviation from Test Standard ............................................................................................................ 17 4.1.5 Test Setup .......................................................................................................................................... 18 4.1.6 EUT Operating Conditions................................................................................................................. 19 4.1.7 Test Results ....................................................................................................................................... 20 4.2 Conducted Emission Measurement .................................................................................................. 24 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 24 4.2.2 Test Instruments ................................................................................................................................ 24 4.2.3 Test Procedures................................................................................................................................. 25 4.2.4 Deviation from Test Standard ............................................................................................................ 25 4.2.5 Test Setup .......................................................................................................................................... 25 4.2.6 EUT Operating Conditions................................................................................................................. 25 4.2.7 Test Results ....................................................................................................................................... 26 4.3 Conducted Out of Band Emission Measurement .............................................................................. 30 4.3.1 Limits of Conducted Out of Band Emission Measurement................................................................ 30 4.3.2 Test Setup .......................................................................................................................................... 30 4.3.3 Test Instruments ................................................................................................................................ 30 4.3.4 Test Procedure .................................................................................................................................. 30 4.3.5 Deviation from Test Standard ............................................................................................................ 30 4.3.6 EUT Operating Condition .................................................................................................................. 30 4.3.7 Test Results ....................................................................................................................................... 30 5 Pictures of Test Arrangements .......................................................................................................... 32 Annex A- Radiated Out of Band Emission (OOBE) Measurement (For U-NII-3 band) ............................ 33 Appendix – Information on the Testing Laboratories ................................................................................ 34 Report No.: RF170906C12-3 Page No. 2 / 34 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued RF170906C12-3 Original release. Sep. 07, 2017 Report No.: RF170906C12-3 Page No. 3 / 34 Report Format Version: 6.1.1

1 Certificate of Conformity Product: Orbi Router, Orbi Satellite Brand: NETGEAR Test Model: RBR20 Series Model: RBS20 (Refer to item 3.1 for more details) Sample Status: Engineering sample Applicant: NETGEAR, INC. Test Date: Sep. 06 ~ Sep. 07, 2017 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) 47 CFR FCC Part 15, Subpart E (Section 15.407) ANSI C63.10-2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Sep. 07, 2017 Celine Chou / Specialist Approved by : , Date: Sep. 07, 2017 Ken Liu / Senior Manager Report No.: RF170906C12-3 Page No. 4 / 34 Report Format Version: 6.1.1

2 Summary of Test Results Applied 47 CFR FCC Part 15, Subpart C (Section 15.247) Standard: 47 CFR FCC Part 15, Subpart E (Section 15.407) FCC Test Item Result Remarks Clause Meet the requirement of limit. 15.207 AC Power Conducted Emission Pass Minimum passing margin is -12.02dB 15.407(b)(6) at 0.15400MHz. 15.205 / 15.209 / Meet the requirement of limit. 15.247(d) Radiated Emissions Pass Minimum passing margin is -0.6dB at 15.407(b) 2488.00MHz. (1/2/3/4(i/ii)/6) *For U-NII-3 band compliance with rule part 15.407(b)(4)(i), the OOBE test plots were recorded in Annex A. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Expanded Uncertainty Measurement Frequency (k=2) (±) Conducted Emissions at mains ports 150kHz ~ 30MHz 2.94 dB 30MHz ~ 200MHz 3.63 dB Radiated Emissions up to 1 GHz 200MHz ~1000MHz 3.64 dB 1GHz ~ 18GHz 2.29 dB Radiated Emissions above 1 GHz 18GHz ~ 40GHz 2.29 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF170906C12-3 Page No. 5 / 34 Report Format Version: 6.1.1

3 General Information 3.1 General Description of EUT Product Orbi Router, Orbi Satellite (Refer to note for more details) Brand NETGEAR Test Model RBR20 Series Model RBS20 Model Difference Refer to note for more details Status of EUT Engineering sample Power Supply Rating 12Vdc from adapter CCK, DQPSK, DBPSK for DSSS WLAN Modulation Type 256QAM, 64QAM, 16QAM, QPSK, BPSK for OFDM Bluetooth LE GFSK Modulation Technology WLAN DSSS, OFDM 802.11b:11/5.5/2/1Mbps 802.11a/g: 54/48/36/24/18/12/9/6Mbps WLAN Transfer Rate 802.11n: up to 300Mbps 802.11ac: up to 867Mbps Bluetooth LE 1Mbps 2.4GHz: 2412 ~ 2462MHz WLAN Operating Frequency 5.0GHz: 5180 ~ 5240MHz, 5745 ~ 5825MHz Bluetooth LE 2402 ~ 2480MHz 2412 ~ 2462MHz: 11 for 802.11b, 802.11g, 802.11n (HT20) 7 for 802.11n (HT40) 5180 ~ 5240MHz: 4 for 802.11a, 802.11n (HT20), 802.11ac (VHT20) WLAN 2 for 802.11n (HT40), 802.11ac (VHT40) Number of Channel 1 for 802.11ac (VHT80) 5745 ~ 5825MHz: 5 for 802.11a, 802.11n (HT20), 802.11ac (VHT20) 2 for 802.11n (HT40), 802.11ac (VHT40) 1 for 802.11ac (VHT80) Bluetooth LE 40 CDD Mode: 2412 ~ 2462MHz: 310.845mW 5180 ~ 5240MHz: 210.769mW 5745 ~ 5825MHz: 615.033mW WLAN Output Power Beamforming Mode: 2412 ~ 2462MHz: 257.156mW 5180 ~ 5240MHz: 210.769mW 5745 ~ 5825MHz: 615.033mW Bluetooth LE 5.248mW Report No.: RF170906C12-3 Page No. 6 / 34 Report Format Version: 6.1.1

WLAN Refer to Note Antenna Type Bluetooth LE Chip antenna with 1.5dBi gain WLAN Refer to Note Antenna Connector Bluetooth LE NA Accessory Device Adapter Data Cable Supplied NA Note: 1. The EUT incorporates a MIMO function. Physically, the EUT provides 2 completed transmitters and 2 receivers. Band Modulation Mode Beamforming Mode TX Function 802.11b Not Support 2TX 802.11g Not Support 2TX 2.4GHz 802.11n (HT20) Support (CDD / NSS1) 2TX 802.11n (HT40) Support (CDD / NSS1) 2TX 802.11a Not Support 2TX 802.11n (HT20) Support (CDD / NSS=1) 2TX 802.11n (HT40) Support (CDD / NSS=1) 2TX 5G 802.11ac (VHT20) Support (CDD / NSS=1) 2TX 802.11ac (VHT40) Support (CDD / NSS=1) 2TX 802.11ac (VHT80) Support (CDD / NSS=1) 2TX * For 802.11n, CDD mode is the worst case for final radiated emission and power line conducted emission tests after pretesting CDD mode and beamforming mode. 2. All models are electrically identical except software firmware. Model: RBR20 is the representative for final test. Brand Model Function Band RF Module Difference 2.4G/UNII-3 Module 1 RBR20 Router UNII-1 Module 2 Master mode only BT BT Module NETGEAR Master mode and Client mode for 2.4GHz 2.4G/UNII-3 Module 1 Client mode for UNII-2C/UNII-3 RBS20 Satellite UNII-1 Module 2 Master mode only for U-NII-1/UNII-2A BT BT Module - The following RF Modules are for the EUT. RF Module Band Antenna No. 2.4G 1/2 Module 1 UNII-3 1/2 Module 2 UNII-1 3/4 BT Module BT 5 Report No.: RF170906C12-3 Page No. 7 / 34 Report Format Version: 6.1.1

3. The following filters are provided to this EUT. RF Module Filter Filter Position Remark Brand / Model Model Name passive filter 1st TFL1 ,TFL2 Filter 1 (pin to pin & Same design) Module 1 passive filter 2nd TFL1 ,TFL2 Filter 2 (pin to pin & Same design) passive filter 1st BFL2, BFL3 Filter 3 (pin to pin & Same design) Module 2 passive filter 2nd BFL2, BFL3 Filter 4 (pin to pin & Same design) 4. The EUT uses following antennas. Ant. Type Dipole Connecter Type I-PEX Directional Antenna Gain (dBi) Item 2.4G 5G Band 1 5G Band 4 - 5.71 5.01 4.65 5. The EUT consumes power from the following adapters. Adapter 1 Brand NETGEAR Model ML18-F120150-A1 P/N 332-11014-01 Input Power 100-120Vac, 50/60Hz, 0.5A Output Power 12Vdc, 1.5A Power Line 1.8m power cable without core attached on adapter Adapter 2 Brand NETGEAR Model MU18A2120150-A1 P/N 332-11015-01 Input Power 100-240Vac, 50/60Hz, 0.5A Output Power 12Vdc, 1.5A Power Line 1.8m power cable without core attached on adapter Adapter 3 Brand NETGEAR Model 2ABB018F 1 NJ P/N 332-11008-01 Input Power 100-120Vac, 50/60Hz, 0.6A Output Power 12Vdc, 1.5A Power Line 1.8m power cable without core attached on adapter Report No.: RF170906C12-3 Page No. 8 / 34 Report Format Version: 6.1.1

Adapter 4 Brand NETGEAR Model 2ABB018F NA P/N 332-11009-01 Input Power 100-240Vac, 50/60Hz, 0.6A Output Power 12Vdc, 1.5A Power Line 1.85m power cable without core attached on adapter * Adapter 1 and 2 are electrically identical, different model names are for marketing purpose. Therefore adapter 1 was chosen for final test and presented in the test report. * Adapter 3 and 4 are electrically identical, different model names are for marketing purpose. Therefore adapter 3 was chosen for final test and presented in the test report. Report No.: RF170906C12-3 Page No. 9 / 34 Report Format Version: 6.1.1

3.2 Description of Test Modes For 2.4GHz 11 channels are provided for 802.11b, 802.11g and 802.11n (HT20): Channel Frequency Channel Frequency 1 2412MHz 7 2442MHz 2 2417MHz 8 2447MHz 3 2422MHz 9 2452MHz 4 2427MHz 10 2457MHz 5 2432MHz 11 2462MHz 6 2437MHz 7 channels are provided for 802.11n (HT40): Channel Frequency Channel Frequency 3 2422MHz 7 2442MHz 4 2427MHz 8 2447MHz 5 2432MHz 9 2452MHz 6 2437MHz For 5180~5240MHz: 4 channels are provided for 802.11a, 802.11n (HT20), 802.11ac (VHT20): Channel Frequency Channel Frequency 36 5180 MHz 44 5220 MHz 40 5200 MHz 48 5240 MHz 2 channels are provided for 802.11n (HT40), 802.11ac (VHT40): Channel Frequency Channel Frequency 38 5190 MHz 46 5230 MHz 1 channel is provided for 802.11ac (VHT80): Channel Frequency 42 5210MHz Report No.: RF170906C12-3 Page No. 10 / 34 Report Format Version: 6.1.1

5745~5825MHz: 5 channels are provided for 802.11a, 802.11n (HT20), 802.11ac (VHT20): Channel Frequency Channel Frequency 149 5745MHz 161 5805MHz 153 5765MHz 165 5825MHz 157 5785MHz 2 channels are provided for 802.11n (HT40), 802.11ac (VHT40): Channel Frequency Channel Frequency 151 5755MHz 159 5795MHz 1 channel is provided for 802.11ac (VHT80): Channel Frequency 155 5775MHz For Bluetooth LE: 40 channels are provided to this EUT: Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) 0 2402 10 2422 20 2442 30 2462 1 2404 11 2424 21 2444 31 2464 2 2406 12 2426 22 2446 32 2466 3 2408 13 2428 23 2448 33 2468 4 2410 14 2430 24 2450 34 2470 5 2412 15 2432 25 2452 35 2472 6 2414 16 2434 26 2454 36 2474 7 2416 17 2436 27 2456 37 2476 8 2418 18 2438 28 2458 38 2478 9 2420 19 2440 29 2460 39 2480 Report No.: RF170906C12-3 Page No. 11 / 34 Report Format Version: 6.1.1

3.2.1 Test Mode Applicability and Tested Channel Detail EUT Configure Applicable to Description Mode RE1G RE<1G PLC OB A √ √ √ √ Power from adapter 1 B - √ √ - Power from adapter 3 Where RE1G: Radiated Emission above 1GHz & RE<1G: Radiated Emission below 1GHz Bandedge Measurement PLC: Power Line Conducted Emission Note: 1. The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on Z-plane. 2. “-” means no effect. Radiated Emission Test (Above 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Modulation Mode Freq. Range (MHz) Available Channel Tested Channel Mode Technology 2412 ~ 2462 1 to 11 DBPSK 802.11b + 802.11a + 5180 ~ 5240 36 to 48 OFDM A 802.11ac (VHT20) + 11 + 40 + 157 + 39 BT LE 5745 ~ 5825 149 to 165 OFDM 2402 ~ 2480 0 to 39 GFSK Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Modulation Mode Freq. Range (MHz) Available Channel Tested Channel Mode Technology 2412 ~ 2462 1 to 11 DBPSK 802.11b + 802.11a + 5180 ~ 5240 36 to 48 OFDM A, B 802.11ac (VHT20) + 11 + 40 + 157 + 39 BT LE 5745 ~ 5825 149 to 165 OFDM 2402 ~ 2480 0 to 39 GFSK Power Line Conducted Emission Test: Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Modulation Mode Freq. Range (MHz) Available Channel Tested Channel Mode Technology 2412 ~ 2462 1 to 11 DBPSK 802.11b + 802.11a + 5180 ~ 5240 36 to 48 OFDM A, B 802.11ac (VHT20) + 11 + 40 + 157 + 39 BT LE 5745 ~ 5825 149 to 165 OFDM 2402 ~ 2480 0 to 39 GFSK Report No.: RF170906C12-3 Page No. 12 / 34 Report Format Version: 6.1.1

Conducted Out-Band Emission Measurement Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Modulation Mode Freq. Range (MHz) Available Channel Tested Channel Mode Technology 2412 ~ 2462 1 to 11 DBPSK 802.11b + 802.11a + 5180 ~ 5240 36 to 48 OFDM A 802.11ac (VHT20) + 11 + 40 + 157 + 39 BT LE 5745 ~ 5825 149 to 165 OFDM 2402 ~ 2480 0 to 39 GFSK Test Condition: Applicable to Environmental Conditions Input Power Tested by RE1G 25 deg. C, 70% RH 120Vac, 60Hz Luis Lee RE<1G 25 deg. C, 70% RH 120Vac, 60Hz Luis Lee PLC 25 deg. C, 75% RH 120Vac, 60Hz Chris Lin Report No.: RF170906C12-3 Page No. 13 / 34 Report Format Version: 6.1.1

3.3 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Product Brand Model No. Serial No. FCC ID Remarks A. Notebook DELL E5410 6RP2YM1 FCC DoC Approved - B. Load NA NA NA NA - Note: 1. All power cords of the above support units are non-shielded (1.8m). 2. Item A acted as a communication partner to transfer data. Shielding ID Descriptions Qty. Length (m) Cores (Qty.) Remarks (Yes/No) 1. RJ45, Cat5e 1 3 N 0 - 2. RJ45, Cat5e 1 1.8 N 0 - 3.3.1 Configuration of System under Test EUT (2) Load (B) Adapter (EUT) (1) Remote site Notebook (A) 3.4 General Description of Applied Standards The EUT is a RF Product. According to the specification of the EUT declared by the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.247) FCC Part 15, Subpart E (15.407) ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. Note: The EUT has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. Report No.: RF170906C12-3 Page No. 14 / 34 Report Format Version: 6.1.1

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power: Frequencies (MHz) Field Strength (microvolts/meter) Measurement Distance (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Limits of unwanted emission out of the restricted bands Applicable To Limit 789033 D02 General UNII Test Procedure Field Strength at 3m New Rules v01r04 PK: 74 (dBµV/m) AV: 54 (dBµV/m) Equivalent Field Strength at Frequency Band Applicable To EIRP Limit 3m 5150~5250 MHz 15.407(b)(1) 5250~5350 MHz 15.407(b)(2) PK: -27 (dBm/MHz) PK: 68.2(dBµV/m) 5470~5725 MHz 15.407(b)(3) PK: -27 (dBm/MHz) *1 PK: 68.2(dBµV/m) *1 *2 PK: 10 (dBm/MHz) PK: 105.2 (dBµV/m) *2 15.407(b)(4)(i) *3 5725~5850 MHz PK: 15.6 (dBm/MHz) PK: 110.8(dBµV/m) *3 *4 PK: 27 (dBm/MHz) PK: 122.2 (dBµV/m) *4 15.407(b)(4)(ii) Emission limits in section 15.247(d) *2 *1 below the band edge increasing linearly to 10 beyond 75 MHz or more above of the band edge. dBm/MHz at 25 MHz above. *3 below the band edge increasing linearly to a level *4 from 5 MHz above or below the band edge of 15.6 dBm/MHz at 5 MHz above. increasing linearly to a level of 27 dBm/MHz at the band edge. Note: The following formula is used to convert the equipment isotropic radiated power (eirp) to field strength: 1000000 30 P E= µV/m, where P is the eirp (Watts). 3 Report No.: RF170906C12-3 Page No. 15 / 34 Report Format Version: 6.1.1

4.1.2 Test Instruments Description & Model No. Serial No. Cal. Date Cal. Due Manufacturer Test Receiver ESCI 100424 Oct. 24, 2016 Oct. 23, 2017 ROHDE & SCHWARZ Spectrum Analyzer FSP40 100040 Aug. 18, 2017 Aug. 17, 2018 ROHDE & SCHWARZ BILOG Antenna VULB9168 9168-155 Dec. 28, 2016 Dec. 27, 2017 SCHWARZBECK HORN Antenna BBHA 9120D 9120D-1170 Dec. 15, 2016 Dec. 14, 2017 SCHWARZBECK HORN Antenna BBHA 9170 BBHA9170241 Dec. 14, 2016 Dec. 13, 2017 SCHWARZBECK Loop Antenna EM-6879 269 Aug. 11, 2017 Aug. 10, 2018 EMCI Preamplifier 8449B 3008A01960 Aug. 08, 2017 Aug. 07, 2018 Agilent Preamplifier 8447D 2944A10631 Aug. 08, 2017 Aug. 07, 2018 Agilent RF signal cable SUCOFLEX 104 MY 13380+295012/04 Aug. 08, 2017 Aug. 07, 2018 HUBER+SUHNER RF signal cable SUCOFLEX 104 Cable-CH4-03 (250724) Aug. 08, 2017 Aug. 07, 2018 HUBER+SUHNER Software ADT_Radiated_ NA NA NA BV ADT V7.6.15.9.4 Antenna Tower MA 4000 010303 NA NA inn-co GmbH Antenna Tower Controller AT100 AT93021703 NA NA BV ADT Turn Table TT100 TT93021703 NA NA BV ADT Turn Table Controller SC100 SC93021703 NA NA BV ADT 26GHz ~ 40GHz Amplifier EM26400 815221 Oct. 17, 2016 Oct. 16, 2017 Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Chamber 4. 3. The horn antenna and preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 4. The FCC Designation Number is TW0003. The number will be varied with the Lab location and scope as attached. 5. The IC Site Registration No. is IC7450F-4. Report No.: RF170906C12-3 Page No. 16 / 34 Report Format Version: 6.1.1

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Both X and Y axes of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is ≥ 1/T (Duty cycle < 98%) or 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF170906C12-3 Page No. 17 / 34 Report Format Version: 6.1.1

4.1.5 Test Setup For Radiated emission below 30MHz 1m EUT& 3m Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable 3m 10m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF170906C12-3 Page No. 18 / 34 Report Format Version: 6.1.1

For Radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions a. Placed the EUT on the testing table. b. Prepared a notebook to act as a communication partner and placed it outside of testing area. c. The communication partner connected with EUT via a RJ45 cable and ran a test program (provided by manufacturer) to enable EUT under transmission condition continuously at specific channel frequency. d. The communication partner sent data to EUT by command "PING". Report No.: RF170906C12-3 Page No. 19 / 34 Report Format Version: 6.1.1

4.1.7 Test Results Above 1GHz Data: 802.11b + 802.11a + 802.11ac (VHT20) + BT LE CH 11 + CH 40 + CH 157 + DETECTOR Peak (PK) CHANNEL CH 39 FUNCTION Average (AV) FREQUENCY RANGE 1GHz ~ 40GHz ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2462.00 110.2 PK 3.14 H 160 76.4 33.8 2 *2462.00 106.4 AV 3.14 H 160 72.6 33.8 3 *2480.00 93.7 PK 3.29 H 288 59.8 33.9 4 *2480.00 89.4 AV 3.29 H 288 55.5 33.9 5 2483.50 57.5 PK 74.0 -16.5 3.41 H 296 23.6 33.9 6 2483.50 46.2 AV 54.0 -7.8 3.41 H 296 12.3 33.9 7 2488.00 60.7 PK 74.0 -13.3 3.14 H 160 26.8 33.9 8 2488.00 50.6 AV 54.0 -3.4 3.14 H 160 16.7 33.9 9 4924.00 50.6 PK 74.0 -23.4 2.41 H 145 42.3 8.3 10 4924.00 37.5 AV 54.0 -16.5 2.41 H 145 29.2 8.3 11 4960.00 49.7 PK 74.0 -24.3 2.31 H 80 41.2 8.5 12 4960.00 36.7 AV 54.0 -17.3 2.31 H 80 28.2 8.5 13 *5200.00 109.0 PK 3.18 H 291 67.7 41.3 14 *5200.00 98.7 AV 3.18 H 291 57.4 41.3 15 #5616.80 61.5 PK 68.2 -6.7 1.28 H 119 53.0 8.5 16 *5785.00 114.2 PK 1.28 H 119 71.5 42.7 17 *5785.00 103.3 AV 1.28 H 119 60.6 42.7 18 #5955.20 61.7 PK 68.2 -6.5 1.28 H 119 52.1 9.6 19 #10400.00 62.0 PK 74.0 -12.0 2.46 H 155 41.8 20.2 20 #10400.00 49.0 AV 54.0 -5.0 2.46 H 155 28.8 20.2 21 11570.00 62.5 PK 74.0 -11.5 1.72 H 254 40.7 21.8 22 11570.00 50.1 AV 54.0 -3.9 1.72 H 254 28.3 21.8 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF170906C12-3 Page No. 20 / 34 Report Format Version: 6.1.1

CH 11 + CH 40 + CH 157 + DETECTOR Peak (PK) CHANNEL CH 39 FUNCTION Average (AV) FREQUENCY RANGE 1GHz ~ 40GHz ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2462.00 115.6 PK 1.88 V 72 81.8 33.8 2 *2462.00 112.4 AV 1.88 V 72 78.6 33.8 3 *2480.00 101.2 PK 3.60 V 184 67.3 33.9 4 *2480.00 96.4 AV 3.60 V 184 62.5 33.9 5 2483.50 57.9 PK 74.0 -16.1 3.52 V 173 24.0 33.9 6 2483.50 47.3 AV 54.0 -6.7 3.52 V 173 13.4 33.9 7 2488.00 62.3 PK 74.0 -11.7 1.88 V 72 28.4 33.9 8 2488.00 53.4 AV 54.0 -0.6 1.88 V 72 19.5 33.9 9 4924.00 49.9 PK 74.0 -24.1 2.02 V 163 41.6 8.3 10 4924.00 36.6 AV 54.0 -17.4 2.02 V 163 28.3 8.3 11 4960.00 50.2 PK 74.0 -23.8 2.71 V 268 41.7 8.5 12 4960.00 37.0 AV 54.0 -17.0 2.71 V 268 28.5 8.5 13 *5200.00 120.8 PK 2.16 V 208 79.5 41.3 14 *5200.00 109.1 AV 2.16 V 208 67.8 41.3 15 #5604.00 61.8 PK 68.2 -6.4 2.16 V 97 53.3 8.5 16 *5785.00 124.0 PK 2.16 V 97 81.3 42.7 17 *5785.00 113.0 AV 2.16 V 97 70.3 42.7 18 #5987.20 61.7 PK 68.2 -6.5 2.16 V 97 52.0 9.7 19 #10400.00 62.4 PK 74.0 -11.6 3.19 V 157 42.2 20.2 20 #10400.00 49.5 AV 54.0 -4.5 3.19 V 157 29.3 20.2 21 11570.00 63.3 PK 74.0 -10.7 1.88 V 54 41.5 21.8 22 11570.00 50.4 AV 54.0 -3.6 1.88 V 54 28.6 21.8 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF170906C12-3 Page No. 21 / 34 Report Format Version: 6.1.1

Below 1GHz data 802.11b + 802.11a + 802.11ac (VHT20) + BT LE CH 11 + CH 40 + CH CHANNEL DETECTOR 157 + CH 39 Quasi-Peak (QP) FUNCTION FREQUENCY RANGE 9kHz ~ 1GHz TEST MODE A ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 57.07 26.5 QP 40.0 -13.5 1.01 H 272 41.1 -14.6 2 175.43 30.0 QP 43.5 -13.5 1.25 H 270 44.4 -14.4 3 212.30 29.7 QP 43.5 -13.8 1.01 H 290 45.8 -16.1 4 617.84 40.8 QP 46.0 -5.2 1.25 H 181 46.4 -5.6 5 707.10 41.2 QP 46.0 -4.8 1.25 H 245 45.3 -4.1 6 844.87 42.6 QP 46.0 -3.4 1.01 H 230 43.9 -1.3 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 37.66 36.6 QP 40.0 -3.4 1.00 V 8 51.9 -15.3 2 74.53 33.7 QP 40.0 -6.3 1.24 V 13 50.3 -16.6 3 621.72 39.4 QP 46.0 -6.6 1.00 V 14 44.8 -5.4 4 730.38 41.8 QP 46.0 -4.2 1.00 V 64 45.2 -3.4 5 825.46 40.1 QP 46.0 -5.9 1.00 V 71 41.7 -1.6 6 879.80 39.8 QP 46.0 -6.2 1.00 V 222 40.8 -1.0 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF170906C12-3 Page No. 22 / 34 Report Format Version: 6.1.1

CH 11 + CH 40 + CH CHANNEL DETECTOR 157 + CH 39 Quasi-Peak (QP) FUNCTION FREQUENCY RANGE 9kHz ~ 1GHz TEST MODE B ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 256.93 25.2 QP 46.0 -20.8 1.24 H 269 38.9 -13.7 2 350.07 25.4 QP 46.0 -20.6 1.00 H 130 36.6 -11.2 3 687.70 39.3 QP 46.0 -6.7 1.00 H 222 43.8 -4.5 4 842.93 37.9 QP 46.0 -8.1 1.50 H 210 39.3 -1.4 5 870.09 39.0 QP 46.0 -7.0 1.24 H 173 40.1 -1.1 6 936.07 42.8 QP 46.0 -3.2 2.00 H 305 42.6 0.2 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 31.84 32.7 QP 40.0 -7.3 1.24 V 175 48.7 -16.0 2 489.77 27.5 QP 46.0 -18.5 1.00 V 146 36.2 -8.7 3 685.76 36.5 QP 46.0 -9.5 2.00 V 331 41.0 -4.5 4 852.63 38.0 QP 46.0 -8.0 1.24 V 177 39.4 -1.4 5 887.56 39.8 QP 46.0 -6.2 1.50 V 173 40.8 -1.0 6 936.07 42.6 QP 46.0 -3.4 1.00 V 130 42.4 0.2 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF170906C12-3 Page No. 23 / 34 Report Format Version: 6.1.1

4.2 Conducted Emission Measurement 4.2.1 Limits of Conducted Emission Measurement Conducted Limit (dBuV) Frequency (MHz) Quasi-peak Average 0.15 - 0.5 66 - 56 56 - 46 0.50 - 5.0 56 46 5.0 - 30.0 60 50 Note: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 4.2.2 Test Instruments Description & Manufacturer Model No. Serial No. Cal. Date Cal. Due Test Receiver ESCI 100613 Nov. 21, 2016 Nov. 20, 2017 ROHDE & SCHWARZ RF signal cable (with 10dB PAD) 5D-FB Cable-cond1-01 Dec. 22, 2016 Dec. 21, 2017 Woken LISN ROHDE & SCHWARZ ESH3-Z5 835239/001 Mar. 10, 2017 Mar. 09, 2018 (EUT) LISN ROHDE & SCHWARZ ESH3-Z5 100311 Aug. 15, 2017 Aug. 14, 2018 (Peripheral) Software BV ADT_Cond_ NA NA NA ADT V7.3.7.3 Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Shielded Room 1. 3. The VCCI Site Registration No. is C-2040. Report No.: RF170906C12-3 Page No. 24 / 34 Report Format Version: 6.1.1

4.2.3 Test Procedures a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) were not recorded. NOTE: The resolution bandwidth and video bandwidth of test receiver is 9kHz for quasi-peak detection (QP) and average detection (AV) at frequency 0.15MHz-30MHz. 4.2.4 Deviation from Test Standard No deviation. 4.2.5 Test Setup Vertical Ground Reference Plane Test Receiver EUT 40cm 80cm LISN Horizontal Ground Reference Plane Note: 1.Support units were connected to second LISN. For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.2.6 EUT Operating Conditions Same as 4.1.6. Report No.: RF170906C12-3 Page No. 25 / 34 Report Format Version: 6.1.1

4.2.7 Test Results 802.11b + 802.11a + 802.11ac (VHT20) + BT LE Quasi-Peak (QP) / Phase Line (L) Detector Function Average (AV) CH 11 + CH 40 + CH 157 + Channel Test Mode A CH 39 Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.21000 10.46 31.56 15.81 42.02 26.27 63.21 53.21 -21.19 -26.94 2 0.37718 10.51 22.13 12.60 32.64 23.11 58.34 48.34 -25.70 -25.23 3 0.97800 10.48 10.00 5.17 20.48 15.65 56.00 46.00 -35.52 -30.35 4 5.49000 10.72 19.50 14.73 30.22 25.45 60.00 50.00 -29.78 -24.55 5 15.22200 11.19 16.44 11.65 27.63 22.84 60.00 50.00 -32.37 -27.16 6 22.17800 11.51 10.91 6.39 22.42 17.90 60.00 50.00 -37.58 -32.10 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level – Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF170906C12-3 Page No. 26 / 34 Report Format Version: 6.1.1

Quasi-Peak (QP) / Phase Neutral (N) Detector Function Average (AV) CH 11 + CH 40 + CH 157 + Channel Test Mode A CH 39 Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15400 10.21 43.55 26.09 53.76 36.30 65.78 55.78 -12.02 -19.48 2 0.17022 10.21 40.86 24.17 51.07 34.38 64.95 54.95 -13.88 -20.57 3 0.38827 10.24 27.06 20.16 37.30 30.40 58.10 48.10 -20.80 -17.70 4 1.09800 10.27 12.35 8.75 22.62 19.02 56.00 46.00 -33.38 -26.98 5 4.68600 10.44 12.68 7.16 23.12 17.60 56.00 46.00 -32.88 -28.40 6 14.97000 10.86 14.87 9.99 25.73 20.85 60.00 50.00 -34.27 -29.15 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level – Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF170906C12-3 Page No. 27 / 34 Report Format Version: 6.1.1

Quasi-Peak (QP) / Phase Line (L) Detector Function Average (AV) CH 11 + CH 40 + CH 157 + Channel Test Mode B CH 39 Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.16200 10.45 32.98 19.78 43.43 30.23 65.36 55.36 -21.93 -25.13 2 0.27350 10.48 31.15 22.38 41.63 32.86 61.01 51.01 -19.38 -18.15 3 0.50663 10.51 13.10 7.35 23.61 17.86 56.00 46.00 -32.39 -28.14 4 0.93800 10.49 10.73 6.12 21.22 16.61 56.00 46.00 -34.78 -29.39 5 3.71800 10.63 21.04 14.73 31.67 25.36 56.00 46.00 -24.33 -20.64 6 19.43000 11.39 1.67 -2.83 13.06 8.56 60.00 50.00 -46.94 -41.44 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level – Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF170906C12-3 Page No. 28 / 34 Report Format Version: 6.1.1

Quasi-Peak (QP) / Phase Neutral (N) Detector Function Average (AV) CH 11 + CH 40 + CH 157 + Channel Test Mode B CH 39 Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15400 10.21 32.77 16.91 42.98 27.12 65.78 55.78 -22.80 -28.66 2 0.27712 10.23 34.39 27.60 44.62 37.83 60.90 50.90 -16.28 -13.07 3 0.36931 10.23 20.54 13.17 30.77 23.40 58.52 48.52 -27.75 -25.12 4 0.66633 10.25 9.04 3.45 19.29 13.70 56.00 46.00 -36.71 -32.30 5 3.55800 10.39 19.92 13.25 30.31 23.64 56.00 46.00 -25.69 -22.36 6 15.87800 10.90 2.30 -2.17 13.20 8.73 60.00 50.00 -46.80 -41.27 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level – Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF170906C12-3 Page No. 29 / 34 Report Format Version: 6.1.1

4.3 Conducted Out of Band Emission Measurement 4.3.1 Limits of Conducted Out of Band Emission Measurement Below 30dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.3.2 Test Setup SPECTRUM EUT Attenuator ANALYZER 4.3.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.3.4 Test Procedure MEASUREMENT PROCEDURE REF a. Set the RBW = 100 kHz. b. Set the VBW ≥ 300 kHz. c. Detector = average. d. Sweep time = auto couple. e. Trace mode = max hold. f. Allow trace to fully stabilize. g. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. MEASUREMENT PROCEDURE OOBE a. Set RBW = 100 kHz. b. Set VBW ≥ 300 kHz. c. Detector = average. d. Sweep = auto couple. e. Trace Mode = max hold. f. Allow trace to fully stabilize. g. Use the peak marker function to determine the maximum amplitude level. 4.3.5 Deviation from Test Standard No deviation. 4.3.6 EUT Operating Condition The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. 4.3.7 Test Results The spectrum plots are attached on the following pages. D1 line indicates the highest level, and D2 line indicates the 30dB offset below D1. It shows compliance with the requirement. Report No.: RF170906C12-3 Page No. 30 / 34 Report Format Version: 6.1.1

802.11b CH 11 + 802.11ac (VHT20) CH 157 Chain 0 Chain 1 Report No.: RF170906C12-3 Page No. 31 / 34 Report Format Version: 6.1.1

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF170906C12-3 Page No. 32 / 34 Report Format Version: 6.1.1

Annex A- Radiated Out of Band Emission (OOBE) Measurement (For U-NII-3 band) 802.11ac (VHT20) CH157 Horizontal Vertical Report No.: RF170906C12-3 Page No. 33 / 34 Report Format Version: 6.1.1

Appendix – Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF170906C12-3 Page No. 34 / 34 Report Format Version: 6.1.1


Document Created: 2017-09-14 10:08:04
Document Modified: 2017-09-14 10:08:04
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC