DTS Test Report

FCC ID: PY317200377

Test Report

Download: PDF
FCCID_3905280

FCC Test Report Report No.: RF170905C13A FCC ID: PY317200377 Test Model: RBS50Y Received Date: Sep. 05, 2017 Test Date: May 04 ~ May 23, 2018 Issued Date: May 29, 2018 Applicant: NETGEAR, INC. Address: 350 East Plumeria Drive San Jose, CA 95134 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) FCC Registration / 788550 / TW0003 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF170905C13A Page No. 1 / 23 Report Format Version: 6.1.1 Reference No.: 170905C12

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail............................................................................. 9 3.3 Description of Support Units ............................................................................................................. 10 3.3.1 Configuration of System under Test .................................................................................................. 10 3.4 General Description of Applied Standards ........................................................................................ 10 4 Test Types and Results ....................................................................................................................... 11 4.1 Radiated Emission and Bandedge Measurement.............................................................................. 11 4.1.1 Limits of Radiated Emission and Bandedge Measurement ............................................................... 11 4.1.2 Test Instruments ................................................................................................................................ 12 4.1.3 Test Procedures................................................................................................................................. 13 4.1.4 Deviation from Test Standard ............................................................................................................ 13 4.1.5 Test Setup .......................................................................................................................................... 14 4.1.6 EUT Operating Conditions................................................................................................................. 15 4.1.7 Test Results ....................................................................................................................................... 16 4.2 Conducted Emission Measurement .................................................................................................. 18 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 18 4.2.2 Test Instruments ................................................................................................................................ 18 4.2.3 Test Procedures................................................................................................................................. 19 4.2.4 Deviation from Test Standard ............................................................................................................ 19 4.2.5 Test Setup .......................................................................................................................................... 19 4.2.6 EUT Operating Conditions................................................................................................................. 19 4.2.7 Test Results ....................................................................................................................................... 20 5 Pictures of Test Arrangements .......................................................................................................... 22 Appendix – Information on the Testing Laboratories ................................................................................ 23 Report No.: RF170905C13A Page No. 2 / 23 Report Format Version: 6.1.1 Reference No.: 170905C12

Release Control Record Issue No. Description Date Issued RF170905C13A Original release. May 29, 2018 Report No.: RF170905C13A Page No. 3 / 23 Report Format Version: 6.1.1 Reference No.: 170905C12

1 Certificate of Conformity Product: Orbi Router, Orbi Satellite, Orbi AC3000 Tri-band WiFi System Brand: NETGEAR Test Model: RBS50Y Sample Status: Engineering sample Applicant: NETGEAR, INC. Test Date: May 04 ~ May 23, 2018 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) ANSI C63.10:2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: May 29, 2018 Celine Chou / Specialist Approved by : , Date: May 29, 2018 Bruce Chen / Project Engineer Report No.: RF170905C13A Page No. 4 / 23 Report Format Version: 6.1.1 Reference No.: 170905C12

2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (Section 15.247) FCC Test Item Result Remarks Clause Meet the requirement of limit. 15.207 AC Power Conducted Emission Pass Minimum passing margin is -12.96dB at 0.15000MHz. 15.205 / Meet the requirement of limit. Radiated Emissions and Band Edge 15.209 / Pass Minimum passing margin is -0.2dB at Measurement 15.247(d) 2483.50MHz. 15.247(d) Antenna Port Emission NA Refer to Note below. 15.247(a)(2) 6dB bandwidth NA Refer to Note below. 15.247(b) Conducted power NA Refer to Note below. 15.247(e) Power Spectral Density NA Refer to Note below. Antenna connector is i-pex (MHF) not a 15.203 Antenna Requirement Pass standard connector. Note: The radiated emission had been an addendum test. Refer to original report for the other test data. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Expanded Uncertainty Measurement Frequency (k=2) (±) Conducted Emissions at mains ports 150kHz ~ 30MHz 2.94 dB 30MHz ~ 200MHz 3.63 dB Radiated Emissions up to 1 GHz 200MHz ~1000MHz 3.64 dB 1GHz ~ 18GHz 2.29 dB Radiated Emissions above 1 GHz 18GHz ~ 40GHz 2.29 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF170905C13A Page No. 5 / 23 Report Format Version: 6.1.1 Reference No.: 170905C12

3 General Information 3.1 General Description of EUT Product Orbi Router, Orbi Satellite, Orbi AC3000 Tri-band WiFi System Brand NETGEAR Test Model RBS50Y Sample Status Engineering sample Power Supply Rating 12Vdc from adapter CCK, DQPSK, DBPSK for DSSS Modulation Type 64QAM, 16QAM, QPSK, BPSK for OFDM Modulation Technology DSSS, OFDM 802.11b:11/5.5/2/1Mbps Transfer Rate 802.11g: 54/48/36/24/18/12/9/6Mbps 802.11n: up to 300Mbps Operating Frequency 2412 ~ 2462MHz 802.11b, 802.11g, 802.11n (HT20): 11 Number of Channel 802.11n (HT40): 7 CDD Mode: 819.478mW Output Power Beamforming Mode: 569.557mW Antenna Type Refer to Note Antenna Connector Refer to Note Accessory Device Adapter Cable Supplied N/A Note: 1. This report is prepared for FCC class II permissive change. The differences compared with the original report (BV CPS report no.: RF170906C13) is adding 2nd source. After evaluation, only the radiated emission and power line conducted emission of 802.11n (HT40) channel 6 has been an addendum test. Refer to original report for the other test data. 2. The EUT incorporates a MIMO function. Physically, the EUT provides 2 completed transmitters and 2 receivers. Modulation Mode Beamforming Mode TX Function 802.11b Not Support 2TX 802.11g Not Support 2TX 802.11n (HT20) Support (CDD / NSS1) 2TX 802.11n (HT40) Support (CDD / NSS1) 2TX * For 802.11n, CDD mode and Beamforming mode are presented in power output test item. For other test items, CDD mode is the worst case for final tests after pretesting. Report No.: RF170905C13A Page No. 6 / 23 Report Format Version: 6.1.1 Reference No.: 170905C12

3. The following RF Modules are for the EUT. (New source are marked in boldface) Brand Model RF Module Band 2.4G Module 1 UNII-1 UNII-2A NETGEAR RBS50Y UNII-2C Module 2 UNII-3 BT Module BT LE RF Module Filter Position Remark 1st TFL1,TFL2 pin to pin & Same design Module 1 2nd TFL1,TFL2 pin to pin & Same design 1st BHPF1,BHPF2,BHPF3,BHPF4 pin to pin & Same design Module 2 2nd BHPF1,BHPF2,BHPF3,BHPF4 pin to pin & Same design RF Module RF Switch Position Remark 1st AS1,AS2,TS1,TS2 pin to pin & Same design Module 1 2nd AS1,AS2,TS1,TS2 pin to pin & Same design 4. The EUT uses following antennas. Ant. Type Dipole Connecter Type i-pex(MHF) Directional Antenna Gain (dBi) Item 2.4G UNII-1 UNII-2A UNII-2C UNII-3 - 5.31 5.97 5.41 8.74 7.57 5. The EUT consumes power from the following adapters. Adapter 1 (US) Brand NETGEAR Model AD2110F10 P/N 332-10999-01 Input Power 100-120Vac, 50/60Hz, 1.0A Output Power 12Vdc, 2.5A Power Line 3m power cable without core attached on adapter Adapter 2 (US) Brand NETGEAR Model 2ADF030F1 NA P/N 332-11000-01 Input Power 100-120Vac, 50/60Hz, 1.0A Output Power 12Vdc, 2.5A Power Line 3m power cable without core attached on adapter * After pre- test, adapter 1 was chosen for final test and presented in the test report. Report No.: RF170905C13A Page No. 7 / 23 Report Format Version: 6.1.1 Reference No.: 170905C12

6. Spurious emission of the simultaneous operation mode as below and the test data please refer to report no.: RF170905C13A-2. No Mode 1 WLAN 2.4GHz + WLAN 5GHz B1 (2TX) + WLAN 5GHz B3 + BT LE 2 WLAN 2.4GHz + WLAN 5GHz B2 + WLAN 5GHz B3 + BT LE 3 WLAN 2.4GHz + WLAN 5GHz B2 + WLAN 5GHz B4 + BT LE 3.2 Description of Test Modes 11 channels are provided for 802.11b, 802.11g and 802.11n (HT20): Channel Frequency Channel Frequency 1 2412MHz 7 2442MHz 2 2417MHz 8 2447MHz 3 2422MHz 9 2452MHz 4 2427MHz 10 2457MHz 5 2432MHz 11 2462MHz 6 2437MHz 7 channels are provided for 802.11n (HT40): Channel Frequency Channel Frequency 3 2422MHz 7 2442MHz 4 2427MHz 8 2447MHz 5 2432MHz 9 2452MHz 6 2437MHz Report No.: RF170905C13A Page No. 8 / 23 Report Format Version: 6.1.1 Reference No.: 170905C12

3.2.1 Test Mode Applicability and Tested Channel Detail EUT Configure Applicable to Description Mode RE1G RE<1G PLC - √ √ √ - Where RE1G: Radiated Emission above 1GHz & Bandedge RE<1G: Radiated Emission below 1GHz Measurement PLC: Power Line Conducted Emission APCM: Antenna Port Conducted Measurement Note: The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on Z-plane. Radiated Emission Test (Above 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Available Tested Modulation Modulation Data Rate Mode Mode Channel Channel Technology Type (Mbps) - 802.11n (HT40) 3 to 9 6 OFDM BPSK 13.5 Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Available Tested Modulation Modulation Data Rate Mode Mode Channel Channel Technology Type (Mbps) - 802.11n (HT40) 3 to 9 6 OFDM BPSK 13.5 Power Line Conducted Emission Test: Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Available Tested Modulation Modulation Data Rate Mode Mode Channel Channel Technology Type (Mbps) - 802.11n (HT40) 3 to 9 6 OFDM BPSK 13.5 Test Condition: Applicable to Environmental Conditions Input Power Tested by RE1G 25 deg. C, 70% RH 120Vac, 60Hz Noah Chang RE<1G 25 deg. C, 70% RH 120Vac, 60Hz Luis Lee PLC 25 deg. C, 71% RH 120Vac, 60Hz Luis Lee Report No.: RF170905C13A Page No. 9 / 23 Report Format Version: 6.1.1 Reference No.: 170905C12

3.3 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Product Brand Model No. Serial No. FCC ID Remarks A. Notebook DELL E5410 6RP2YM1 FCC DoC Approved - Note: 1. All power cords of the above support units are non-shielded (1.8m). 2. Item A acted as a communication partner to transfer data. Shielding ID Descriptions Qty. Length (m) Cores (Qty.) Remarks (Yes/No) 1. RJ45, Cat5e 1 3 N 0 - 3.3.1 Configuration of System under Test EUT Adapter (EUT) (1) Remote site Notebook (A) 3.4 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.247) KDB 558074 D01 DTS Meas Guidance v04 KDB 662911 D01 Multiple Transmitter Output v02r01 ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. Report No.: RF170905C13A Page No. 10 / 23 Report Format Version: 6.1.1 Reference No.: 170905C12

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 30dB below the highest level of the desired power: Frequencies Field Strength Measurement Distance (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 Note: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF170905C13A Page No. 11 / 23 Report Format Version: 6.1.1 Reference No.: 170905C12

4.1.2 Test Instruments Description & Model No. Serial No. Cal. Date Cal. Due Manufacturer Test Receiver ESCI 100424 Oct. 17, 2017 Oct. 16, 2018 ROHDE & SCHWARZ Spectrum Analyzer FSP40 100040 Aug. 18, 2017 Aug. 17, 2018 ROHDE & SCHWARZ BILOG Antenna VULB9168 9168-155 Dec. 11, 2017 Dec. 10, 2018 SCHWARZBECK HORN Antenna BBHA 9120D 9120D-1170 Dec. 13, 2017 Dec. 12, 2018 SCHWARZBECK HORN Antenna BBHA 9170 BBHA9170241 Dec. 01, 2017 Nov. 30, 2018 SCHWARZBECK Loop Antenna EM-6879 269 Aug. 11, 2017 Aug. 10, 2018 EMCI Preamplifier Agilent 8447D 2944A10631 Aug. 08, 2017 Aug. 07, 2018 (Below 1GHz) Preamplifier Agilent 8449B 3008A01922 Sep. 15, 2017 Sep. 14, 2018 (Above 1GHz) RF signal cable SUCOFLEX 104 MY 13380+295012/04 Aug. 08, 2017 Aug. 07, 2018 HUBER+SUHNER RF signal cable SUCOFLEX 104 Cable-CH4-03 (250724) Aug. 08, 2017 Aug. 07, 2018 HUBER+SUHNER Software ADT_Radiated_ NA NA NA BV ADT V7.6.15.9.4 Antenna Tower MA 4000 010303 NA NA inn-co GmbH Antenna Tower Controller AT100 AT93021703 NA NA BV ADT Turn Table TT100 TT93021703 NA NA BV ADT Turn Table Controller SC100 SC93021703 NA NA BV ADT Boresight Antenna Fixture FBA-01 FBA-SIP01 NA NA High Speed Peak Power ML2495A 0824012 Aug. 18, 2017 Aug. 17, 2018 Meter Power Sensor MA2411B 0738171 Aug. 18, 2017 Aug. 17, 2018 Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Chamber 4. 3. The FCC Designation Number is TW0003. The number will be varied with the Lab location and scope as attached. 4. The IC Site Registration No. is IC 7450F-4. Report No.: RF170905C13A Page No. 12 / 23 Report Format Version: 6.1.1 Reference No.: 170905C12

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Parallel, perpendicular, and ground-parallel orientations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is ≥ 1/T (Duty cycle < 98%) or 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF170905C13A Page No. 13 / 23 Report Format Version: 6.1.1 Reference No.: 170905C12

4.1.5 Test Setup For Radiated emission below 30MHz 1m EUT& 3m Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable 3m 10m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF170905C13A Page No. 14 / 23 Report Format Version: 6.1.1 Reference No.: 170905C12

For Radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions a. Placed the EUT on the testing table. b. Prepared a notebook to act as a communication partner and placed it outside of testing area. c. The communication partner connected with EUT via a RJ45 cable and ran a test program (provided by manufacturer) to enable EUT under transmission condition continuously at specific channel frequency. d. The communication partner sent data to EUT by command "PING". Report No.: RF170905C13A Page No. 15 / 23 Report Format Version: 6.1.1 Reference No.: 170905C12

4.1.7 Test Results Above 1GHz Data: 802.11n (HT40) CHANNEL TX Channel 6 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 56.6 PK 74.0 -17.4 1.60 H 314 23.2 33.4 2 2390.00 45.5 AV 54.0 -8.5 1.60 H 314 12.1 33.4 3 *2437.00 95.9 PK 1.60 H 314 62.5 33.4 4 *2437.00 86.8 AV 1.60 H 314 53.4 33.4 5 2483.50 57.5 PK 74.0 -16.5 1.60 H 314 24.0 33.5 6 2483.50 45.7 AV 54.0 -8.3 1.60 H 314 12.2 33.5 7 4874.00 47.6 PK 74.0 -26.4 2.10 H 256 44.3 3.3 8 4874.00 33.9 AV 54.0 -20.1 2.10 H 256 30.6 3.3 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 65.6 PK 74.0 -8.4 1.95 V 338 32.2 33.4 2 2390.00 52.7 AV 54.0 -1.3 1.95 V 338 19.3 33.4 3 *2437.00 113.1 PK 1.95 V 338 79.7 33.4 4 *2437.00 103.8 AV 1.95 V 338 70.4 33.4 5 2483.50 68.8 PK 74.0 -5.2 1.95 V 338 35.3 33.5 6 2483.50 53.8 AV 54.0 -0.2 1.95 V 338 20.3 33.5 7 4874.00 47.8 PK 74.0 -26.2 2.05 V 332 44.5 3.3 8 4874.00 34.9 AV 54.0 -19.1 2.05 V 332 31.6 3.3 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF170905C13A Page No. 16 / 23 Report Format Version: 6.1.1 Reference No.: 170905C12

Below 1GHz worst-case data: 802.11n (HT40) CHANNEL TX Channel 6 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 55.13 22.6 QP 40.0 -17.4 1.00 H 318 36.7 -14.1 2 101.69 22.5 QP 43.5 -21.0 1.50 H 134 40.6 -18.1 3 268.57 24.5 QP 46.0 -21.5 1.00 H 125 37.6 -13.1 4 344.24 25.7 QP 46.0 -20.3 1.00 H 52 37.1 -11.4 5 567.39 37.0 QP 46.0 -9.0 1.50 H 146 44.0 -7.0 6 912.78 39.2 QP 46.0 -6.8 1.50 H 305 39.0 0.2 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 60.95 34.2 QP 40.0 -5.8 1.01 V 149 48.6 -14.4 2 101.69 24.8 QP 43.5 -18.7 1.50 V 14 42.9 -18.1 3 437.38 24.7 QP 46.0 -21.3 1.50 V 133 34.0 -9.3 4 557.69 34.9 QP 46.0 -11.1 1.01 V 103 42.3 -7.4 5 794.42 29.4 QP 46.0 -16.6 1.01 V 216 31.1 -1.7 6 939.95 37.6 QP 46.0 -8.4 1.01 V 13 36.8 0.8 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF170905C13A Page No. 17 / 23 Report Format Version: 6.1.1 Reference No.: 170905C12

4.2 Conducted Emission Measurement 4.2.1 Limits of Conducted Emission Measurement Conducted Limit (dBuV) Frequency (MHz) Quasi-peak Average 0.15 - 0.5 66 - 56 56 - 46 0.50 - 5.0 56 46 5.0 - 30.0 60 50 Note: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 4.2.2 Test Instruments Description & Manufacturer Model No. Serial No. Cal. Date Cal. Due Test Receiver ESCI 100613 Nov. 23, 2017 Nov. 22, 2018 ROHDE & SCHWARZ RF signal cable (with 10dB PAD) 5D-FB Cable-cond1-01 Sep. 05, 2017 Sep. 04, 2018 Woken LISN ROHDE & SCHWARZ ESH3-Z5 835239/001 Mar. 06, 2018 Mar. 05, 2019 (EUT) LISN ROHDE & SCHWARZ ESH3-Z5 100311 Aug. 15, 2017 Aug. 14, 2018 (Peripheral) Software BV ADT_Cond_ NA NA NA ADT V7.3.7.3 Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Shielded Room 1. 3. The VCCI Site Registration No. is C-2040. Report No.: RF170905C13A Page No. 18 / 23 Report Format Version: 6.1.1 Reference No.: 170905C12

4.2.3 Test Procedures a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was not recorded. Note: The resolution bandwidth and video bandwidth of test receiver is 9kHz for quasi-peak detection (QP) and average detection (AV) at frequency 0.15MHz-30MHz. 4.2.4 Deviation from Test Standard No deviation. 4.2.5 Test Setup Vertical Ground Reference Plane Test Receiver EUT 40cm 80cm LISN Horizontal Ground Reference Plane Note: 1.Support units were connected to second LISN. For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.2.6 EUT Operating Conditions Same as 4.1.6. Report No.: RF170905C13A Page No. 19 / 23 Report Format Version: 6.1.1 Reference No.: 170905C12

4.2.7 Test Results Worst-case data: 802.11n (HT40) Quasi-Peak (QP) / Phase Line (L) Detector Function Average (AV) Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15000 10.16 42.88 23.53 53.04 33.69 66.00 56.00 -12.96 -22.31 2 0.16967 10.16 39.78 24.02 49.94 34.18 64.98 54.98 -15.04 -20.80 3 0.19255 10.16 34.72 19.36 44.88 29.52 63.93 53.93 -19.05 -24.41 4 0.24384 10.17 26.87 11.41 37.04 21.58 61.96 51.96 -24.92 -30.38 5 0.27120 10.17 24.86 10.94 35.03 21.11 61.08 51.08 -26.05 -29.97 6 0.34926 10.19 21.93 12.60 32.12 22.79 58.98 48.98 -26.86 -26.19 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF170905C13A Page No. 20 / 23 Report Format Version: 6.1.1 Reference No.: 170905C12

Quasi-Peak (QP) / Phase Neutral (N) Detector Function Average (AV) Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15391 10.15 35.17 16.83 45.32 26.98 65.79 55.79 -20.47 -28.81 2 0.16967 10.15 39.60 23.37 49.75 33.52 64.98 54.98 -15.23 -21.46 3 0.18508 10.16 35.68 18.77 45.84 28.93 64.25 54.25 -18.41 -25.32 4 0.21282 10.17 30.90 15.02 41.07 25.19 63.09 53.09 -22.02 -27.90 5 0.25458 10.17 26.72 10.53 36.89 20.70 61.61 51.61 -24.72 -30.91 6 0.35389 10.19 24.44 12.57 34.63 22.76 58.87 48.87 -24.24 -26.11 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF170905C13A Page No. 21 / 23 Report Format Version: 6.1.1 Reference No.: 170905C12

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF170905C13A Page No. 22 / 23 Report Format Version: 6.1.1 Reference No.: 170905C12

Appendix – Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF170905C13A Page No. 23 / 23 Report Format Version: 6.1.1 Reference No.: 170905C12


Document Created: 2018-06-14 11:48:02
Document Modified: 2018-06-14 11:48:02
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC