EMP Calculation

FCC ID: PY317200377

RF Exposure Info

Download: PDF
FCCID_3905278

RF Exposure Report Report No.: SA170905C13A FCC ID: PY317200377 Test Model: RBS50Y Received Date: Sep. 05, 2017 Test Date: Sep. 11 ~ Oct. 16, 2017 Issued Date: May 29, 2018 Applicant: NETGEAR, INC. Address: 350 East Plumeria Drive San Jose, CA 95134 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) FCC Registration / 788550 / TW0003 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA170905C13A Page No. 1 / 7 Report Format Version: 6.1.1 Reference No.: 170905C12

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 3 Calculation Result of Maximum Conducted Power........................................................................... 6 Report No.: SA170905C13A Page No. 2 / 7 Report Format Version: 6.1.1 Reference No.: 170905C12

Release Control Record Issue No. Description Date Issued SA170905C13A Original release. May 29, 2018 Report No.: SA170905C13A Page No. 3 / 7 Report Format Version: 6.1.1 Reference No.: 170905C12

1 Certificate of Conformity Product: Orbi Router, Orbi Satellite, Orbi AC3000 Tri-band WiFi System Brand: NETGEAR Test Model: RBS50Y Sample Status: Engineering sample Applicant: NETGEAR, INC. Test Date: Sep. 11 ~ Oct. 16, 2017 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: May 29, 2018 Celine Chou / Specialist Approved by : , Date: May 29, 2018 Bruce Chen / Project Engineer Report No.: SA170905C13A Page No. 4 / 7 Report Format Version: 6.1.1 Reference No.: 170905C12

2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time (MHz) Strength (V/m) Strength (A/m) (mW/cm2) (minutes) Limits For General Population / Uncontrolled Exposure 300-1500 … … F/1500 30 1500-100,000 … … 1.0 30 F = Frequency in MHz 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 27cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA170905C13A Page No. 5 / 7 Report Format Version: 6.1.1 Reference No.: 170905C12

3 Calculation Result of Maximum Conducted Power Frequency Antenna Power Max Power Distance Limit Function Band TX Function Gain Density (dBm) (cm) (mW/cm2) (MHz) (dBi) (mW/cm2) CDD Mode 2412-2462 2TX 29.14 5.31 27 0.304 1 1TX 17.16 3.71 27 0.013 1 5180-5240 2TX 17.17 5.97 27 0.022 1 5260-5320 2TX 23.74 5.41 27 0.090 1 5500-5700 4TX 23.64 8.74 27 0.189 1 WLAN 5745-5825 4TX 29.69 7.57 27 0.581 1 Beamforming Mode 2412-2462 2TX 27.56 5.31 27 0.211 1 5180-5240 2TX 14.18 5.97 27 0.011 1 5260-5320 2TX 23.72 5.41 27 0.089 1 5500-5700 4TX 21.25 8.74 27 0.109 1 5745-5825 4TX 28.20 7.57 27 0.412 1 BT LE 2402-2480 1TX 7.83 1.50 27 0.001 1 Note: The Max Power = Max tune up power 2412~2462MHz Directional gain = 5.31dBi 5180~5240MHz Directional gain = 5.97dBi 5260~5320MHz Directional gain = 5.41dBi 5500~5700MHz Directional gain = 8.74dBi 5745~5825MHz Directional gain = 7.57dBi Max Power (dBm) Total Power Power Limit Frequency Band WLAN BT LE (dBm) (dBm) 2.4GHz 29.14 7.83 29.17 30 Report No.: SA170905C13A Page No. 6 / 7 Report Format Version: 6.1.1 Reference No.: 170905C12

Conclusion: The formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1 CPD = Calculation power density LPD = Limit of power density WLAN 2.4GHz + WLAN 5GHz band 1 (1TX) + WLAN 5GHz band 4 + BT LE = 0.304 + 0.013 + 0.581 + 0.001 = 0.899 < 1 WLAN 2.4GHz + WLAN 5GHz band 1 (2TX) + WLAN 5GHz band 4 + BT LE = 0.304 + 0.022 + 0.581 + 0.001 = 0.908 < 1 WLAN 2.4GHz + WLAN 5GHz band 1 (2TX) + WLAN 5GHz band 3 + BT LE = 0.304 + 0.022 + 0.189 + 0.001 = 0.516 < 1 WLAN 2.4GHz + WLAN 5GHz band 2 + WLAN 5GHz band 3 + BT LE = 0.304 + 0.090 + 0.189 + 0.001 = 0.584 < 1 WLAN 2.4GHz + WLAN 5GHz band 2 + WLAN 5GHz band 4 + BT LE = 0.304 + 0.090 + 0.581 + 0.001 = 0.976 < 1 ---END--- Report No.: SA170905C13A Page No. 7 / 7 Report Format Version: 6.1.1 Reference No.: 170905C12


Document Created: 2018-06-08 10:02:31
Document Modified: 2018-06-08 10:02:31
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC