Users Manual (R6700v3) rev 4.pdf

FCC ID: PY316200342

Users Manual

Download: PDF
FCCID_3681016

                           Package Contents                                                   2. Restart Your Modem and
                                                                                                 Plug In Your Router



Quick Start
AC1750 Smart WiFi Router                                                                        Unplug your modem, remove and replace the backup battery if it uses one, and then
Model
Model:R6400v2
      R6700v3
        R6700v3                                                                                 plug the modem back in. Use the Ethernet cable to connect the modem to the yellow
                                                     Router                                     Internet port on the router.
                                                                                                Note: If your Internet connection does not require a modem, connect your main
                                                                                                Ethernet cable to the yellow Internet port on the router.
                               Ethernet cable                 Power adapter
                                                              (varies by region)                Connect the router to a power source. The router’s Power LED       lights amber and
                                                                                                then turns white when the router is ready.

                           1. Position the Antennas                                           3. Connect to the Internet
                                  45°                                 45°




                                                                                                Make sure that the router’s WiFi LED    is lit. Look on the router’s label for the
                                                                                                preassigned WiFi network name (SSID) and network key (password).
                                                                                                Open the WiFi connection manager on your WiFi-enabled computer or mobile device,
                                                                                                find the router’s SSID, and use the router’s password to connect to the router’s WiFi
                                                                                                network.
                             For the best WiFi performance, position the antennas as shown.     Launch a web browser. If the installation assistant does not display, visit
                                                                                                www.routerlogin.net. If a login window displays, enter admin for the admin user name
                                                                                                and password for the admin password.
                                                                                                Follow the onscreen instructions to connect to the Internet.
                                                                                                The router’s Internet LED      lights white when the router is connected to the
                                                                                                Internet.


All Set Up!                                                                                         Get Free Apps
                                                                                                    Start enjoying your new router right away with free apps that make management simple.

                                                                                                    Visit netgear.com/support/product/R6400v2 to download the apps.

                                                                                                                NETGEAR genie. Personal dashboard to monitor, control, and repair your home
                                                                                                                network. Includes remote access to manage your network away from home.

                                                                                                                ReadySHARE Vault. Free software for automatic backup of a Windows
                                                                          Power
   Internet                                                               adapter                               computer to a USB hard drive connected to the router.

                                                                                                                ReadyCLOUD. Enjoy personal and secure cloud access to USB storage anytime,
                                                                                                                anywhere.



                                                                                                    Support
                                         Router                                                     Thank you for purchasing this NETGEAR product. You can visit
                                                                                                    www.netgear.com/support to register your product, get help, access the latest downloads
                                                                                                    and user manuals, and join our community. We recommend that you use only official
                                                                                                    NETGEAR support resources.

                                                                                                    For the current EU Declaration of Conformity, visit
              Modem                                                                      Computer   http://support.netgear.com/app/answers/detail/a_id/11621/.
                          Ethernet cable
                                                                                                    For regulatory compliance information, visit
                                                                                                    http://www.netgear.com/about/regulatory/.

                                                                                                    See the regulatory compliance document before connecting the power supply.



                      For more information about your router, see the Do More booklet.




                               NETGEAR INTL LTD
                               Building 3, University Technology Centre                             NETGEAR, Inc.              © NETGEAR, Inc., NETGEAR and the NETGEAR Logo
                               Curraheen Road, Cork, Ireland                                        350 East Plumeria Drive    are trademarks of NETGEAR, Inc. Any non-NETGEAR
                                                                                                    San Jose, CA 95134, USA    trademarks are used for reference purposes only.   September 2016


Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:


-   Reorient or relocate the receiving antenna.
-   Increase the separation between the equipment and receiver.
-   Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-   Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate
this equipment.


This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.


For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to
indoor environment.

Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 23cm between the radiator & your body.


Industry Canada statement:
This device complies with ISED’s licence-exempt RSSs. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes : (1) le dispositif ne doit pas produire de brouillage préjudiciable,
et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage
susceptible de provoquer un fonctionnement indésirable.
Caution :
(i) the device for operation in the band 5150-5250 MHz is only for indoor use
to reduce the potential for harmful interference to co-channel mobile
satellite systems;
(ii) the maximum antenna gain permitted for devices in the bands 5250-5350
MHz and 5470-5725 MHz shall be such that the equipment still complies with
the e.i.r.p. limit;
(iii) the maximum antenna gain permitted for devices in the band 5725-5850
MHz shall be such that the equipment still complies with the e.i.r.p. limits
specified for point-to-point and non-point-to-point operation as appropriate;
and
(iv) the worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p.
elevation mask requirement set forth in Section 6.2.2(3) shall be clearly
indicated.
(v) Users should also be advised that high-power radars are allocated as
primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850
MHz and that these radars could cause interference and/or damage to LE-LAN
devices.
Avertissement:
Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des
instructions précises sur les restrictions susmentionnées, notamment :
(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés
uniquement pour une utilisation à l’intérieur afin de réduire les risques de
brouillage préjudiciable aux systèmes de satellites mobiles utilisant les
mêmes canaux;
(ii) le gain maximal d'antenne permis pour les dispositifs utilisant les bandes
de 5250 à 5 350 MHz et de 5470 à 5725 MHz doit être conforme à la limite de
la p.i.r.e;


(iii) le gain maximal d'antenne permis (pour les dispositifs utilisant la bande
de 5 725 à 5 850 MHz) doit être conforme à la limite de la p.i.r.e. spécifiée
pour l'exploitation point à point et l’exploitation non point à point, selon le
cas;
(iv) les pires angles d’inclinaison nécessaires pour rester conforme à
l’exigence de la p.i.r.e. applicable au masque d’élévation, et énoncée à la
section 6.2.2 3), doivent être clairement indiqués.
(v) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de
radars de haute puissance sont désignés utilisateurs principaux (c.-à-d.,
qu’ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que
ces radars pourraient causer du brouillage et/ou des dommages aux
dispositifs LAN-EL.
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 25cm between the radiator & your body.


Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements ISED
établies pour un environnement non contrôlé. Cet équipement doit être
installé et utilisé avec un minimum de 25 cm de distance entre la source de
rayonnement et votre corps.



Document Created: 2017-12-12 15:37:32
Document Modified: 2017-12-12 15:37:32

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC