RF Exposure Info (MPE) rev 2.pdf

FCC ID: PY316200341

RF Exposure Info

Download: PDF
FCCID_3626006

RF Exposure Report Report No.: SA160621C27L FCC ID: PY316200341 Test Model: RBR50 Series Mode: RBS50, SRR60, SRS60 Received Date: Jun. 20, 2016 Test Date: Jul. 21 ~ Dec. 06, 2016 Issued Date: Jun. 15, 2017 Applicant: NETGEAR, INC. Address: 350 East Plumeria Drive San Jose, CA 95134 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA160621C27L Page No. 1 / 7 Report Format Version: 6.1.1 Reference No.: 170524C14

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 3 Calculation Result of Maximum Conducted Power........................................................................... 6 Report No.: SA160621C27L Page No. 2 / 7 Report Format Version: 6.1.1 Reference No.: 170524C14

Release Control Record Issue No. Description Date Issued SA160621C27L Original release. Jun. 15, 2017 Report No.: SA160621C27L Page No. 3 / 7 Report Format Version: 6.1.1 Reference No.: 170524C14

1 Certificate of Conformity Product: Orbi Router, Orbi Satellite Brand: NETGEAR Test Model: RBR50 Series Mode: RBS50, SRR60, SRS60 Sample Status: Engineering sample Applicant: NETGEAR, INC. Test Date: Jul. 21 ~ Dec. 06, 2016 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D03 (January 17, 2014) IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Jun. 15, 2017 Polly Chien / Specialist Approved by : , Date: Jun. 15, 2017 Ken Liu / Senior Manager Report No.: SA160621C27L Page No. 4 / 7 Report Format Version: 6.1.1 Reference No.: 170524C14

2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time (MHz) Strength (V/m) Strength (A/m) (mW/cm2) (minutes) Limits For General Population / Uncontrolled Exposure 300-1500 … … F/1500 30 1500-100,000 … … 1.0 30 F = Frequency in MHz 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 28cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA160621C27L Page No. 5 / 7 Report Format Version: 6.1.1 Reference No.: 170524C14

3 Calculation Result of Maximum Conducted Power Frequency Band Max Power Antenna Gain Power Density Distance (cm) Limit (mW/cm2) (MHz) (dBm) (dBi) (mW/cm2) (CDD Mode) 2412-2462 29.58 2.61 28 0.168 1 5180-5240 29.54 4.18 28 0.239 1 5260-5320 23.24 4.18 28 0.056 1 5500-5700 23.18 7.76 28 0.126 1 5745-5825 29.70 7.76 28 0.566 1 (Beamforming_NSS 1 Mode) 2412-2462 29.50 2.61 28 0.165 1 5180-5240 29.14 4.18 28 0.218 1 5260-5320 23.22 4.18 28 0.056 1 5500-5700 21.10 7.76 28 0.078 1 5745-5825 27.92 7.76 28 0.375 1 (Beamforming_NSS 2 Mode) 5745-5825 29.51 4.86 28 0.278 1 Note: 2.4GHz: Directional gain = 2.61dBi NSS 1 Mode 5GHz U-NII-1 Band: Directional gain = 4.18dBi 5GHz U-NII-2A Band: Directional gain = 4.18dBi 5GHz U-NII-2C Band: Directional gain = 7.43dBi 5GHz U-NII-3 Band: Directional gain = 7.43dBi NSS 2 Mode 5GHz U-NII-3 Band: Directional gain = 4.86dBi Antenna Power Frequency Max Power Distance Limit Modulation type Gain Density Channel (dBm) (cm) (mW/cm2) (dBi) (mW/cm2) 2402 MHz 7.45 1.50 28 0.001 1 BT LE 2440 MHz 6.98 1.50 28 0.001 1 2480 MHz 6.92 1.50 28 0.001 1 Note: BT LE: Directional gain = 1.50 dBi Frequency Max. Power (dBm) Modulation type Channel Total Power (dBm) Power Limit (dBm) WLAN 2.4GHz BT LE (MHz) CDD Mode 802.11g +BT LE 2437 + 2480 29.58 7.45 29.61 30 Beamforming Mode 802.11n (HT20) 2437 + 2480 29.50 7.45 29.53 30 +BT LE Report No.: SA160621C27L Page No. 6 / 7 Report Format Version: 6.1.1 Reference No.: 170524C14

Conclusion: The formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1 CPD = Calculation power density LPD = Limit of power density WLAN 2.4GHz + WLAN 5GHz + BT LE = 0.168 + 0.566+ 0.001 = 0.735 Max. WLAN 5GHz (Band 1) + WLAN 5GHz (Band 4) = 0.239 + 0.566 = 0.805 Therefore, the maximum calculations of above situations are less than the “1” limit. --- END --- Report No.: SA160621C27L Page No. 7 / 7 Report Format Version: 6.1.1 Reference No.: 170524C14


Document Created: 2017-10-16 13:49:26
Document Modified: 2017-10-16 13:49:26
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC