Test Report (DTS-BT LE)_rev.pdf

FCC ID: PY316200341

Test Report

Download: PDF
FCCID_3510595

FCC Test Report Report No.: RF160621C27J FCC ID: PY316200341 Test Model: RBR50 Series Mode/Code Name: RBS50, Beehive 3, Beehive 4 (refer to item 3.1 for more details) Received Date: Jun. 20, 2016 Test Date: Jul. 13, 2016 ~ Mar. 14, 2017 Issued Date: Mar. 20, 2017 Applicant: NETGEAR, INC. Address: 350 East Plumeria Drive San Jose, CA 95134 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF160621C27J Page No. 1 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 9 3.2.1 Test Mode Applicability and Tested Channel Detail........................................................................... 10 3.3 Description of Support Units .............................................................................................................. 11 3.3.1 Configuration of System under Test ................................................................................................... 11 3.4 General Description of Applied Standards ......................................................................................... 11 4 Test Types and Results ...................................................................................................................... 12 4.1 Radiated Emission and Bandedge Measurement............................................................................. 12 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 12 4.1.2 Test Instruments ................................................................................................................................ 13 4.1.3 Test Procedures................................................................................................................................. 14 4.1.4 Deviation from Test Standard ............................................................................................................ 14 4.1.5 Test Setup .......................................................................................................................................... 15 4.1.6 EUT Operating Conditions................................................................................................................. 16 4.1.7 Test Results ....................................................................................................................................... 17 4.2 Conducted Emission Measurement .................................................................................................. 21 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 21 4.2.2 Test Instruments ................................................................................................................................ 21 4.2.3 Test Procedures................................................................................................................................. 22 4.2.4 Deviation from Test Standard ............................................................................................................ 22 4.2.5 Test Setup .......................................................................................................................................... 22 4.2.6 EUT Operating Conditions................................................................................................................. 22 4.2.7 Test Results ....................................................................................................................................... 23 4.3 6dB Bandwidth Measurement ........................................................................................................... 25 4.3.1 Limits of 6dB Bandwidth Measurement ............................................................................................. 25 4.3.2 Test Setup .......................................................................................................................................... 25 4.3.3 Test Instruments ................................................................................................................................ 25 4.3.4 Test Procedure .................................................................................................................................. 25 4.3.5 Deviation fromTest Standard ............................................................................................................. 25 4.3.6 EUT Operating Conditions................................................................................................................. 25 4.3.7 Test Result ......................................................................................................................................... 26 4.4 Conducted Output Power Measurement........................................................................................... 27 4.4.1 Limits of Conducted Output Power Measurement ............................................................................ 27 4.4.2 Test Setup .......................................................................................................................................... 27 4.4.3 Test Instruments ................................................................................................................................ 27 4.4.4 Test Procedures................................................................................................................................. 27 4.4.5 Deviation from Test Standard ............................................................................................................ 27 4.4.6 EUT Operating Conditions................................................................................................................. 27 4.4.7 Test Results ....................................................................................................................................... 27 4.5 Power Spectral Density Measurement .............................................................................................. 28 4.5.1 Limits of Power Spectral Density Measurement ............................................................................... 28 4.5.2 Test Setup .......................................................................................................................................... 28 4.5.3 Test Instruments ................................................................................................................................ 28 4.5.4 Test Procedure .................................................................................................................................. 28 4.5.5 Deviation from Test Standard ............................................................................................................ 28 4.5.6 EUT Operating Condition .................................................................................................................. 28 4.5.7 Test Results ....................................................................................................................................... 29 Report No.: RF160621C27J Page No. 2 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

4.6 Conducted Out of Band Emission Measurement .............................................................................. 30 4.6.1 Limits of Conducted Out of Band Emission Measurement ............................................................... 30 4.6.2 Test Setup .......................................................................................................................................... 30 4.6.3 Test Instruments ................................................................................................................................ 30 4.6.4 Test Procedure .................................................................................................................................. 30 4.6.5 Deviation from Test Standard ............................................................................................................ 30 4.6.6 EUT Operating Condition .................................................................................................................. 30 4.6.7 Test Results ....................................................................................................................................... 30 5 Pictures of Test Arrangements .......................................................................................................... 32 Appendix – Information on the Testing Laboratories ................................................................................ 33 Report No.: RF160621C27J Page No. 3 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

Release Control Record Issue No. Description Date Issued RF160621C27J Original release Mar. 20, 2017 Report No.: RF160621C27J Page No. 4 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

1 Certificate of Conformity Product: Orbi Router (refer to item 3.1 for more details) Brand: NETGEAR Test Model: RBR50 Series Mode/Code Name: RBS50, Beehive 3, Beehive 4 (refer to item 3.1 for more details) Sample Status: Engineering Sample Applicant: NETGEAR, INC. Test Date: Jul. 13, 2016 ~ Mar. 14, 2017 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) ANSI C63.10:2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Mar. 20, 2017 Polly Chien / Specialist Approved by : , Date: Mar. 20, 2017 Ken Liu / Senior Manager Report No.: RF160621C27J Page No. 5 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (Section 15.247) FCC Test Item Result Remarks Clause Meet the requirement of limit. 15.207 AC Power Conducted Emission Pass Minimum passing margin is -16.23dB at 0.15781MHz. 15.205 / Meet the requirement of limit. Radiated Emissions and Band Edge 15.209 / Pass Minimum passing margin is -4.4dB at Measurement 15.247(d) 109.46MHz. 15.247(d) Antenna Port Emission Pass Meet the requirement of limit. 15.247(a)(2) 6dB bandwidth Pass Meet the requirement of limit. 15.247(b) Conducted power Pass Meet the requirement of limit. 15.247(e) Power Spectral Density Pass Meet the requirement of limit. 15.203 Antenna Requirement Pass No antenna connector is used. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Expanded Uncertainty Measurement Frequency (k=2) (±) Conducted Emissions at mains ports 150kHz ~ 30MHz 2.44 dB 30MHz ~ 200MHz 3.59 dB Radiated Emissions up to 1 GHz 200MHz ~1000MHz 3.60 dB 1GHz ~ 18GHz 2.29 dB Radiated Emissions above 1 GHz 18GHz ~ 40GHz 2.29 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF160621C27J Page No. 6 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

3 General Information 3.1 General Description of EUT Product Orbi Router (Refer to note for more details) Brand NETGEAR Test Model RBR50 Series Model/Code Name RBS50, Beehive 3, Beehive 4 Model Difference Refer to note for more details Sample Status Engineering Sample Power Supply Rating 12Vdc from adapter Modulation Type GFSK Modulation Technology DSSS Transfer Rate 1Mbps Operating Frequency 2402~2480MHz Number of Channel 40 Channel Spacing 1MHz Output Power 5.559mW Antenna Type Chip antenna with 1.5dBi gain Antenna Connector NA Accessory Device Adapter Data Cable Supplied 1.95m RJ45 non-shielded cable w/o core Note: 1. This report is prepared for FCC class II permissive change. The difference compared with the original report (BV ADT report no.: RF160621C27I) is adding BT LE function by software. Therefore, all test items had been re-tested. 2. All models are electrically identical except the firmware. Model: RBR50 is the representative for final test. Product Model/ Name/ Brand RF Module Difference Code Name Code Product software firmware: RBR50_V1.1.0.16Master mode only Orbi Module 1 The housings Beehive 3 is different with RBR50, and RBR50, Router, Beehive 3 has no USB port. Beehive 3 Armball3 Module 2 The housings of Beehive 3 is different with RBS50, and Beehive 3 has no USB port. NETGEAR software firmware: RBS50_V1.1.0.16Master mode and Module 1 Client mode for 5.50 ~ 5.70GHz band Orbi RBS50, The housings of Beehive 4 is different with RBR50, and Satellite’ Beehive 4 Beehive 4 has no USB port. Armball4 Module 2 The housings of Beehive 4 is different with RBS50, and Beehive 4 has no USB port. Note: All of the RF specifications (include antenna type and location) are identical except the differences stated. RF Module 1 support WLAN 2.4GHz band, 5.18 ~ 5.24GHz and 5.26 ~ 5.32GHz band functionally. RF Module 2 WLAN 5.50 ~ 5.70GHz and 5.745 ~ 5.825GHz band functionally. Report No.: RF160621C27J Page No. 7 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

3. The module 2 card has type C, type D and different gaskets on the following modes. Mode C was the worst case for final test. Mode Description A Type C on chain 1, 2, 3, and 4. Triangular gaskets on chain 1, 2, 3, and 4. B Type C on chain 1, 2, 3, and 4. Triangular gaskets on chain 1, 2, and 3. No gasket on chain 4. C Type C on chain 1, 2, 3, and 4. Rectangular gaskets on chain 1, 2, 3, and 4. D Type C on chain 1, 2, 3, and 4. Rectangular gaskets on chain 1, 2, and 3. No gasket on chain 4. Type C on chain 1, 2, and 3. Type D on chain 4. Triangular gaskets on chain 1, 2, and 3. No E gasket on chain 4. 4. The following filters are provided to this EUT. RF Module Filter Position Gasket Remark Brand / Model passive filter 1st (Filter 1) TFL1 ,TFL2 With TFL1, TFL2 gasket (pin to pin & Same design) Module 1 Without TFL1, passive filter 2nd (Filter 2) TFL1 ,TFL2 TFL2 gasket (pin to pin & Same design) BHPF1 ,BHPF2 With BHPF1, BHPF2, passive filter 1st (Filter 3) BHPF3 ,BHPF4 BHPF3, BHPF4 gasket (pin to pin & Same design) Module 2 BHPF1 ,BHPF2 Without BHPF1, BHPF2, passive filter 2nd (Filter 4) BHPF3 ,BHPF4 BHPF3, BHPF4 gasket (pin to pin & Same design) 5. The EUT uses following adapters. Adapter 1 Brand NETGEAR Model AD2080F20 PN 332-10883-01 Input Power 100-240Vdc, 50/60Hz 1.0A Output Power 12Vdc, 3.5A Power Line 1.8m power cable without core attached on adapter Adapter 2 Brand NETGEAR Model 2ABN042F NA PN 332-10888-01 Input Power 100-240Vdc, 50/60Hz 1.3A Output Power 12Vdc, 3.5A Power Line 1.85m power cable without core attached on adapter *After pre-tested two of adapters found adapter 2 was the worst case, therefore chosen for final tests and presented in the test report. 6. Spurious emission of the simultaneous operation (2.4GHz, 5GHz and BT LE) has been evaluated and no non-compliance was found. Report No.: RF160621C27J Page No. 8 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

3.2 Description of Test Modes 40 channels are provided to this EUT: Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) 0 2402 10 2422 20 2442 30 2462 1 2404 11 2424 21 2444 31 2464 2 2406 12 2426 22 2446 32 2466 3 2408 13 2428 23 2448 33 2468 4 2410 14 2430 24 2450 34 2470 5 2412 15 2432 25 2452 35 2472 6 2414 16 2434 26 2454 36 2474 7 2416 17 2436 27 2456 37 2476 8 2418 18 2438 28 2458 38 2478 9 2420 19 2440 29 2460 39 2480 Report No.: RF160621C27J Page No. 9 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

3.2.1 Test Mode Applicability and Tested Channel Detail EUT Configure Applicable to Description Mode RE1G RE<1G PLC APCM - √ √ √ √ - Where RE1G: Radiated Emission above 1GHz & Bandedge RE<1G: Radiated Emission below 1GHz Measurement PLC: Power Line Conducted Emission APCM: Antenna Port Conducted Measurement Note: The EUT was positioned on the Z-plane during testing. Radiated Emission Test (Above 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Available Channel Tested Channel Modulation Type Date Rate (Mbps) Mode - 0 to 39 0, 19, 39 GFSK 1 Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Available Channel Tested Channel Modulation Type Date Rate (Mbps) Mode - 0 to 39 0 GFSK 1 Power Line Conducted Emission Test: Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Available Channel Tested Channel Modulation Type Date Rate (Mbps) Mode - 0 to 39 0 GFSK 1 Antenna Port Conducted Measurement: This item includes all test value of each mode, but only includes spectrum plot of worst value of each mode. Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Available Channel Tested Channel Modulation Type Date Rate (Mbps) Mode - 0 to 39 0, 19, 39 GFSK 1 Test Condition: Applicable to Environmental Conditions Input Power Tested by RE1G 25 deg. C, 70% RH 120Vac, 60Hz Matthew Yang RE<1G 25 deg. C, 70% RH 120Vac, 60Hz Matthew Yang PLC 25 deg. C, 75% RH 120Vac, 60Hz Chris Lin APCM 24 deg. C, 64% RH 120Vac, 60Hz Match Tsui Report No.: RF160621C27J Page No. 10 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

3.3 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Product Brand Model No. Serial No. FCC ID Remarks A. Notebook DELL E5410 6RP2YM1 FCC DoC Approved - B. USB 3.0 Flash HP v250W 01 FCC DoC Approved - C. Load N/A N/A N/A N/A - Note: 1. All power cords of the above support units are non-shielded (1.8m). 2. Item A acted as a communication partner to transfer data. Shielding ID Descriptions Qty. Length (m) Cores (Qty.) Remarks (Yes/No) 1. RJ45 3 1.8 N 0 - 2. RJ45 1 10 N 0 - 3.3.1 Configuration of System under Test (1) USB Flash (B) Load (C) EUT Adapter (EUT) (2) Remote site Notebook (A) 3.4 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.247) 558074 D01 DTS Meas Guidance v03r05 ANSI C63.10:2013 All test items have been performed and recorded as per the above standards. Note: The EUT has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. Report No.: RF160621C27J Page No. 11 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 30dB below the highest level of the desired power: Frequencies (MHz) Field Strength (microvolts/meter) Measurement Distance (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 30dB under any condition of modulation. Report No.: RF160621C27J Page No. 12 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

4.1.2 Test Instruments Tested date: Mar. 03 ~ Mar. 14, 2017 Description & Model No. Serial No. Cal. Date Cal. Due Manufacturer Test Receiver ESCI 100424 Oct. 24, 2016 Oct. 23, 2017 ROHDE & SCHWARZ Spectrum Analyzer FSP40 100040 Aug. 16, 2016 Aug. 15, 2017 ROHDE & SCHWARZ BILOG Antenna VULB9168 9168-155 Dec. 28, 2016 Dec. 27, 2017 SCHWARZBECK HORN Antenna BBHA 9120D 9120D-1170 Dec. 15, 2016 Dec. 14, 2017 SCHWARZBECK HORN Antenna BBHA 9170 BBHA9170241 Dec. 14, 2016 Dec. 13, 2017 SCHWARZBECK Loop Antenna EM-6879 269 Aug. 11, 2016 Aug. 10, 2017 Preamplifier 8449B 3008A01960 Aug. 09, 2016 Aug. 08, 2017 Agilent Preamplifier 8447D 2944A10631 Aug. 09, 2016 Aug. 08, 2017 Agilent RF signal cable SUCOFLEX 104 MY 13380+295012/04 Aug. 09, 2016 Aug. 08, 2017 HUBER+SUHNER RF signal cable SUCOFLEX 104 Cable-CH4-03 (250724) Aug. 09, 2016 Aug. 08, 2017 HUBER+SUHNER Software ADT_Radiated_ NA NA NA BV ADT V7.6.15.9.4 Antenna Tower MA 4000 010303 NA NA inn-co GmbH Antenna Tower Controller AT100 AT93021703 NA NA BV ADT Turn Table TT100 TT93021703 NA NA BV ADT Turn Table Controller SC100 SC93021703 NA NA BV ADT High Speed Peak Power ML2495A 0824012 Aug. 11, 2016 Aug. 10, 2017 Meter Power Sensor MA2411B 0738171 Aug. 11, 2016 Aug. 10, 2017 Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Chamber 4. 3. The horn antenna and preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 4. The FCC Site Registration No. is 460141. 5. The IC Site Registration No. is IC7450F-4. Report No.: RF160621C27J Page No. 13 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Both X and Y axes of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is ≥ 1/T (Duty cycle < 98%) or 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF160621C27J Page No. 14 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

4.1.5 Test Setup For Radiated emission below 30MHz 1m EUT& 3m Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable EUT& 3m 10m Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF160621C27J Page No. 15 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

For Radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions a. Placed the EUT on the testing table. b. Prepared a notebook to act as a communication partner and placed it outside of testing area. c. The communication partner connected with EUT via a RJ45 cable and ran a test program (provided by manufacturer) to enable EUT under transmission condition continuously at specific channel frequency. d. The communication partner sent data to EUT by command "PING". e. The necessary accessories enable the system in full functions. Report No.: RF160621C27J Page No. 16 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

4.1.7 Test Results Above 1GHz Data: CHANNEL TX Channel 0 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION LIMIT MARGIN NO. FREQ. (MHz) LEVEL HEIGHT ANGLE VALUE FACTOR (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 56.6 PK 74.0 -17.4 2.30 H 144 23.70 32.90 2 2390.00 45.1 AV 54.0 -8.9 2.30 H 144 12.20 32.90 3 *2402.00 101.4 PK 2.30 H 144 68.50 32.90 4 *2402.00 97.5 AV 2.30 H 144 64.60 32.90 5 4804.00 51.1 PK 74.0 -22.9 2.76 H 247 44.40 6.70 6 4804.00 42.6 AV 54.0 -11.4 2.76 H 247 35.90 6.70 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION LIMIT MARGIN NO. FREQ. (MHz) LEVEL HEIGHT ANGLE VALUE FACTOR (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 55.8 PK 74.0 -18.2 1.18 V 236 22.90 32.90 2 2390.00 46.2 AV 54.0 -7.8 1.18 V 236 13.30 32.90 3 *2402.00 106.5 PK 1.18 V 236 73.60 32.90 4 *2402.00 102.3 AV 1.18 V 236 69.40 32.90 5 4804.00 48.7 PK 74.0 -25.3 1.00 V 71 42.00 6.70 6 4804.00 36.6 AV 54.0 -17.4 1.00 V 71 29.90 6.70 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF160621C27J Page No. 17 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

CHANNEL TX Channel 19 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION LIMIT MARGIN NO. FREQ. (MHz) LEVEL HEIGHT ANGLE VALUE FACTOR (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.00 99.6 PK 2.18 H 141 66.50 33.10 2 *2440.00 96.0 AV 2.18 H 141 62.90 33.10 3 4880.00 51.9 PK 74.0 -22.1 2.53 H 244 45.10 6.80 4 4880.00 44.9 AV 54.0 -9.1 2.53 H 244 38.10 6.80 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION LIMIT MARGIN NO. FREQ. (MHz) LEVEL HEIGHT ANGLE VALUE FACTOR (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.00 104.3 PK 1.55 V 239 71.20 33.10 2 *2440.00 100.6 AV 1.55 V 239 67.50 33.10 3 4880.00 48.6 PK 74.0 -25.4 1.77 V 144 41.80 6.80 4 4880.00 39.0 AV 54.0 -15.0 1.77 V 144 32.20 6.80 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF160621C27J Page No. 18 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

CHANNEL TX Channel 39 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION LIMIT MARGIN NO. FREQ. (MHz) LEVEL HEIGHT ANGLE VALUE FACTOR (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 99.3 PK 2.16 H 145 66.00 33.30 2 *2480.00 95.4 AV 2.16 H 145 62.10 33.30 3 2483.50 57.0 PK 74.0 -17.0 2.16 H 145 23.70 33.30 4 2483.50 46.8 AV 54.0 -7.2 2.16 H 145 13.50 33.30 5 4960.00 51.5 PK 74.0 -22.5 2.61 H 280 46.00 5.50 6 4960.00 44.0 AV 54.0 -10.0 2.61 H 280 38.50 5.50 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION LIMIT MARGIN NO. FREQ. (MHz) LEVEL HEIGHT ANGLE VALUE FACTOR (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 103.0 PK 1.45 V 241 69.70 33.30 2 *2480.00 99.8 AV 1.45 V 241 66.50 33.30 3 2483.50 57.9 PK 74.0 -16.1 1.45 V 241 24.60 33.30 4 2483.50 47.5 AV 54.0 -6.5 1.45 V 241 14.20 33.30 5 4960.00 49.9 PK 74.0 -24.1 1.62 V 150 42.90 7.00 6 4960.00 41.3 AV 54.0 -12.7 1.62 V 150 34.30 7.00 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF160621C27J Page No. 19 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

Below 1GHz worst-case data: CHANNEL TX Channel 0 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 30MHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION LIMIT MARGIN NO. FREQ. (MHz) LEVEL HEIGHT ANGLE VALUE FACTOR (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 109.46 36.9 QP 43.5 -6.6 1.50 H 318 51.80 -14.90 2 204.54 27.4 QP 43.5 -16.1 1.00 H 91 41.80 -14.40 3 423.80 36.5 QP 46.0 -9.5 1.00 H 157 45.40 -8.90 4 449.03 39.8 QP 46.0 -6.2 1.00 H 147 48.30 -8.50 5 749.79 33.0 QP 46.0 -13.0 1.00 H 163 36.40 -3.40 6 891.44 37.8 QP 46.0 -8.2 1.99 H 273 39.60 -1.80 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION LIMIT MARGIN NO. FREQ. (MHz) LEVEL HEIGHT ANGLE VALUE FACTOR (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 30.00 11.9 QP 40.0 -28.1 1.00 V 277 24.80 -12.90 2 109.46 39.1 QP 43.5 -4.4 1.00 V 318 54.00 -14.90 3 336.48 25.7 QP 46.0 -20.3 1.50 V 193 35.80 -10.10 4 447.09 37.2 QP 46.0 -8.8 1.24 V 180 45.80 -8.60 5 577.09 27.6 QP 46.0 -18.4 1.00 V 300 34.30 -6.70 6 740.09 30.8 QP 46.0 -15.2 2.00 V 205 34.40 -3.60 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF160621C27J Page No. 20 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

4.2 Conducted Emission Measurement 4.2.1 Limits of Conducted Emission Measurement Conducted Limit (dBuV) Frequency (MHz) Quasi-peak Average 0.15 - 0.5 66 - 56 56 - 46 0.50 - 5.0 56 46 5.0 - 30.0 60 50 Note: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 4.2.2 Test Instruments Tested date: Jul. 13, 2016 Description & Manufacturer Model No. Serial No. Cal. Date Cal. Due Test Receiver ESCS30 100289 Dec. 23, 2015 Dec. 22, 2016 ROHDE & SCHWARZ RF signal cable (with 10dB PAD) 5D-FB Cable-cond2-01 Dec. 26, 2015 Dec. 25, 2016 Woken LISN ROHDE & SCHWARZ ESH2-Z5 100100 Jan. 11, 2016 Jan. 10, 2017 (EUT) LISN ROHDE & SCHWARZ ESH3-Z5 100312 Jul. 26, 2016 Jul. 25, 2017 (Peripheral) Software BV ADT_Cond_ NA NA NA ADT V7.3.7.3 Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Shielded Room 2. 3. The VCCI Site Registration No. is C-2047. Report No.: RF160621C27J Page No. 21 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

4.2.3 Test Procedures a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was not recorded. NOTE: All modes of operation were investigated and the worst-case emissions are reported. 4.2.4 Deviation from Test Standard No deviation. 4.2.5 Test Setup Vertical Ground Reference Plane Test Receiver EUT 40cm 80cm LISN Horizontal Ground Reference Plane Note: 1.Support units were connected to second LISN. For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.2.6 EUT Operating Conditions Same as 4.1.6. Report No.: RF160621C27J Page No. 22 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

4.2.7 Test Results Quasi-Peak (QP) / Phase Line (L) Detector Function Average (AV) Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.16562 10.13 37.58 20.60 47.71 30.73 65.18 55.18 -17.47 -24.45 2 0.25938 10.17 24.04 10.28 34.21 20.45 61.45 51.45 -27.24 -31.00 3 0.38828 10.19 21.96 12.28 32.15 22.47 58.10 48.10 -25.95 -25.63 4 0.74375 10.21 8.04 3.94 18.25 14.15 56.00 46.00 -37.75 -31.85 5 2.31250 10.29 6.38 1.94 16.67 12.23 56.00 46.00 -39.33 -33.77 6 8.84375 10.46 10.04 5.58 20.50 16.04 60.00 50.00 -39.50 -33.96 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF160621C27J Page No. 23 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

Quasi-Peak (QP) / Phase Neutral (N) Detector Function Average (AV) Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15781 10.13 39.22 20.52 49.35 30.65 65.58 55.58 -16.23 -24.93 2 0.25156 10.17 24.26 9.94 34.43 20.11 61.71 51.71 -27.28 -31.60 3 0.38828 10.19 23.22 13.62 33.41 23.81 58.10 48.10 -24.69 -24.29 4 1.46094 10.25 8.66 5.72 18.91 15.97 56.00 46.00 -37.09 -30.03 5 4.73438 10.41 9.82 3.34 20.23 13.75 56.00 46.00 -35.77 -32.25 6 11.21094 10.58 11.98 7.38 22.56 17.96 60.00 50.00 -37.44 -32.04 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF160621C27J Page No. 24 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

4.3 6dB Bandwidth Measurement 4.3.1 Limits of 6dB Bandwidth Measurement The minimum of 6dB Bandwidth Measurement is 0.5 MHz. 4.3.2 Test Setup Spectrum EUT Attenuator Analyzer 4.3.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.3.4 Test Procedure a. Set resolution bandwidth (RBW) = 100kHz b. Set the video bandwidth (VBW) ≥ 3 x RBW, Detector = Peak. c. Trace mode = max hold. d. Sweep = auto couple. e. Measure the maximum width of the emission that is constrained by the frequencies associated with the two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission 4.3.5 Deviation fromTest Standard No deviation. 4.3.6 EUT Operating Conditions The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF160621C27J Page No. 25 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

4.3.7 Test Result 6dB Bandwidth Minimum Limit Channel Frequency (MHz) Pass / Fail (MHz) (MHz) 0 2402 0.70 0.5 Pass 19 2440 0.71 0.5 Pass 39 2480 0.70 0.5 Pass Spectrum Plot of Worst Value Report No.: RF160621C27J Page No. 26 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

4.4 Conducted Output Power Measurement 4.4.1 Limits of Conducted Output Power Measurement For systems using digital modulation in the 2400–2483.5 MHz bands: 1 Watt (30dBm) 4.4.2 Test Setup EUT Power Sensor Power Meter Attenuator 4.4.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.4.4 Test Procedures An average power sensor was used on the output port of the EUT. A power meter was used to read the response of the average power senso and set the detector to AVERAGE. Record the power level. 4.4.5 Deviation from Test Standard No deviation. 4.4.6 EUT Operating Conditions Same as 4.3.6. 4.4.7 Test Results FOR AVERAGE POWER Average Power Average Power Channel Frequency (MHz) Limit (dBm) Pass/Fail (mW) (dBm) 0 2402 5.559 7.45 30 Pass 19 2440 4.989 6.98 30 Pass 39 2480 4.920 6.92 30 Pass Report No.: RF160621C27J Page No. 27 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

4.5 Power Spectral Density Measurement 4.5.1 Limits of Power Spectral Density Measurement The Maximum of Power Spectral Density Measurement is 8dBm. 4.5.2 Test Setup Same as 4.3.2 4.5.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.5.4 Test Procedure a. Set analyzer center frequency to DTS channel center frequency. b. Set the span to 1.5 times the DTS bandwidth. c. Set the RBW to: 3 kHz ≤ RBW ≤ 100 kHz. d. Set the VBW ≥ 3 × RBW. e. Detector = peak. f. Sweep time = auto couple. g. Trace mode = max hold. h. Allow trace to fully stabilize. i. Use the peak marker function to determine the maximum amplitude level within the RBW. 4.5.5 Deviation from Test Standard No deviation. 4.5.6 EUT Operating Condition Same as 4.3.6 Report No.: RF160621C27J Page No. 28 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

4.5.7 Test Results Channel Freq. (MHz) PSD (dBm) Limit (dBm) Pass / Fail 0 2402 -18.15 8 Pass 19 2440 -18.68 8 Pass 39 2480 -18.69 8 Pass Spectrum Plot of Worst Value Report No.: RF160621C27J Page No. 29 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

4.6 Conducted Out of Band Emission Measurement 4.6.1 Limits of Conducted Out of Band Emission Measurement Below -30dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.6.2 Test Setup Same as 4.3.2 4.6.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.6.4 Test Procedure Measurement Procedure REF a. Set the RBW = 100 kHz. b. Set the VBW ≥ 300 kHz. c. Detector = peak. d. Sweep time = auto couple. e. Trace mode = max hold. f. Allow trace to fully stabilize. g. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. Measurement Procedure OOBE a. Set RBW = 100 kHz. b. Set VBW ≥ 300 kHz. c. Detector = peak. d. Sweep = auto couple. e. Trace Mode = max hold. f. Allow trace to fully stabilize. g. Use the peak marker function to determine the maximum amplitude level. 4.6.5 Deviation from Test Standard No deviation. 4.6.6 EUT Operating Condition Same as 4.3.6 4.6.7 Test Results The spectrum plots are attached on the following pages. D1 line indicates the highest level, and D2 line indicates the 30dB offset below D1. It shows compliance with the requirement. Report No.: RF160621C27J Page No. 30 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

CH 0 CH 19 CH 39 CH 0 Band edge CH 39 Band edge Report No.: RF160621C27J Page No. 31 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF160621C27J Page No. 32 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11

Appendix – Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF160621C27J Page No. 33 / 33 Report Format Version: 6.1.1 Reference No.: 160621C27, 170314C11


Document Created: 2017-08-14 17:07:20
Document Modified: 2017-08-14 17:07:20
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC