User Manual

FCC ID: PY313300240

Users Manual

Download: PDF
FCCID_2180263

STS7000 Home Security Touch Screen Installation Guide Note: This document is for certification purposes. Images are for position only and might differ from the actual product.

Package Contents Stand Touch Screen 12V power adapter USB adapter 2

Hardware Features The Touch Screen includes a stand and controls as shown here. • Stand. To put the Touch Screen in an upright position, position the device in the stand. 3

• 12V power adapter input. To recharge the battery or to run on electricity instead of the battery, plug the power cord into the 12V power adapter input. Configure the Touch Screen  To configure the touch screen for use with a wireless network: 1. Plug the USB adapter into the USB port on the back of the Touch Screen. 4

2. Connect the adapter to the gateway device LAN port with an Ethernet cable. 3. Plug the power adapter into the 12V power adapter input. 5

Add the Touch Screen  To add the Touch Screen to your wireless network: 1. Open your web browser. 2. In the address bar, type: https://www.example.com. A sign-in screen displays. 3. Type your user name and password. 4. Click Sign In. 6

Summary n Alert o lces System @ te Security and Modes Cameras No cameras installed. Status Unavailable. Today‘s Schedule None scheduled for today: C Other Devices No other devices installd. Notable Events None in the last 7 days.

5. Click the System tab. 6. Click Manage Devices. For the Manage Devices option to appear, your gateway needs to be connected to the Internet. 8

Manage Devices Assistant Touch Screens c n se ons @ Cameras io nst astwinuons ces Lights, Thermostats & more c nessezon seom

7. Click Touch Screens. 8. From the drop-down list, select NETGEAR 7" Touch Screen (HSS101). 9. Click Continue. 10

The Name Devices screen displays. 10. Enter a name for your Touch Screen. 11. Type the MAC ID. 11

The MAC ID appears inside the back of the Touch Screen and contains 12 characters, either numbers or the letters A–F. 70F3958CA95A SOV6D2800002X01 67D1258CA05B Note: The placement of the MAC ID label might differ from the MAC ID location depicted in Step Two of the Touch Screen Assistant. 12. Click Continue. 12

Step tvee Touch Screen Aasistant ConnectDevee suom com onuis memitopers pe menscan carc n ts mensosen ne ons ow ooo un Seme EeS Ichn meiigonin io ho uremn Gmtonn Hes comeronmenseversn in eectcr on enccvene Sup ies Suprar mssc Sene

Touch Screen Aasistant suom We nate ynsonsmangsnsemcres Seme 00000 Sup ie toree mssc Sene

Wait while the Touch Screen is added to your wireless network. Adding the touch screen can take up to two minutes. 14. To add an additional Touch Screen, click Add Another. 15. When you have added all the touch screens, click Finish. 15

16. Disconnect the Ethernet cable from the USB adapter. 17. Disconnect the USB adapter from the Touch Screen. 18. Move the Touch Screen and power supply to your desired location. 19. Plug the power adapter into the 12V power adapter input. It might take up to 5 minutes to connect to the wireless network. If the touch screen does not connect, see Troubleshooting. 16

Troubleshooting This section provides information about troubleshooting your Touch Screen. • Dark screen. The screen is blank (dark). Reason. The Touch Screen is set to night mode. Resolution. To change the mode, tap the screen. The screen is dark except the logo, time, and a message that security information is not available from this device. Reason. The connection between the Touch Screen and the gateway is lost. Resolution. To display technical information about your Touch Screen, tap the logo in the top-left corner, then, in the screen that displays, tap Version Information. • WiFi Connection. Lost or intermittent WiFi connection. Reasons. - If the microwave oven is on, it can disrupt WiFi service. - 2.4 GHz cordless telephones can interfere with the Touch Screen’s WiFi connection because they operate at the same frequency as other devices on a LAN. - A 2.4 GHz wireless gaming adapter is nearby. - A 2.4 GHz baby monitor is nearby. 17

- The Touch Screen is too far from the gateway. Resolutions. - The Touch Screen must be within 50 feet of the gateway. If the Touch Screen is mounted outside the range of the wireless network, consider including the Model WN2000RPT- 111NAS Wi-Fi Extender for increased range. - Turn off the microwave oven. No need to unplug it. - If you determine that your cordless phone is interfering, you can: • Change the location of the Touch Screen or the base of the cordless phone. • Switch the channel on the access point. If that does not work, try another channel. • Operate the phone with the antenna lowered, if that is an option. • Use a phone that is not a 2.4 GHz phone. 18

Support Contact your Internet service provider for technical support . Trademarks NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. © NETGEAR, Inc. All rights reserved. Compliance For the current EU Declaration of Conformity, visit: http://support.netgear.com/app/answers/detail/a_id/11621/.

September 2013


Document Created: 2017-11-01 00:34:50
Document Modified: 2017-11-01 00:34:50
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC