RF Exposure Information (MPE).pdf

FCC ID: PY312400216

RF Exposure Info

Download: PDF
FCCID_2789339

RF Exposure Report Report No.: SA150731D07 FCC ID: PY312400216 Test Model: D6200xxxxx (The “x” in the model name can be 0 to 9, A to Z or blank, for marketing purpose) Series Model: D6400 Received Date: Jul. 31, 2015 Test Date: Aug. 4 ~ Oct. 1, 2015 Issued Date: Oct. 1, 2015 Applicant: NETGEAR INC. Address: 350 East Plumeria Drive, San Jose, CA 95134, USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA150731D07 Page No. 1 / 6 Report Format Version: 6.1.1

Table of Contents Release Control Record ............................................................................................................................. 3 1 Certificate of Conformity ................................................................................................................. 4 2 RF Exposure .................................................................................................................................... 5 2.1 Limits For Maximum Permissible Exposure (MPE).......................................................................... 5 2.2 MPE Calculation Formula ............................................................................................................... 5 2.3 Classification .................................................................................................................................. 5 3 Calculation Result Of Maximum Conducted Power ....................................................................... 6 Report No.: SA150731D07 Page No. 2 / 6 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued SA150731D07 Original release. Oct. 1, 2015 Report No.: SA150731D07 Page No. 3 / 6 Report Format Version: 6.1.1

1 Certificate of Conformity Product: D6200 WiFi Modem Router Brand: NETGEAR Test Model: D6200xxxxx (The “x” in the model name can be 0 to 9, A to Z or blank, for marketing purpose) Series Model: D6400 Sample Status: Engineering sample Applicant: NETGEAR INC. Test Date: Aug. 4 ~ Oct. 1, 2015 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D03 IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Oct. 1, 2015 ( Celia Chen / Senior Specialist ) Approved by : , Date: Oct. 1, 2015 ( Rex Lai / Assistant Manager ) Report No.: SA150731D07 Page No. 4 / 6 Report Format Version: 6.1.1

2 RF Exposure 2.1 Limits For Maximum Permissible Exposure (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time (MHz) Strength (V/m) Strength (A/m) (mW/cm2) (minutes) Limits For General Population / Uncontrolled Exposure 300-1500 … … F/1500 30 1500-100,000 … … 1.0 30 F = Frequency in MHz 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA150731D07 Page No. 5 / 6 Report Format Version: 6.1.1

3 Calculation Result Of Maximum Conducted Power Frequency Max Power Antenna Gain Distance Power Density Limit Band (dBm) (dBi) (cm) (mW/cm2) (mW/cm2) (MHz) 5745-5825 26.17 7.34 20 0.4464 1 NOTE: Directional gain = 10 log[(104.70/20 + 103.94/20)2 / 2] + 10log(2) = 7.34dBi --- END --- Conclusion: The formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1 CPD = Calculation power density LPD = Limit of power density WLAN 2.4GHz + WLAN 5GHz = 0.4314 + 0.5011 = 0.9325 Therefore the maximum calculation of this situation is 0.9325, which is less than the “1” limit. Report No.: SA150731D07 Page No. 6 / 6 Report Format Version: 6.1.1


Document Created: 2015-10-02 13:20:48
Document Modified: 2015-10-02 13:20:48
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC