RF Exposure Information (MPE) rev.pdf

FCC ID: PY312200203

RF Exposure Info

Download: PDF
FCCID_2770364

RF Exposure Report Report No.: SA120725E01F FCC ID: PY312200203 Test Model: WNDAP660 Received Date: July 19, 2012 Test Date: July 31, 2012 and Aug. 31, 2015 Issued Date: Sep. 22, 2015 Applicant: Netgear Incorporated. Address: 350 East Plumeria Drive San Jose California United States 95134 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (3): E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA120725E01F Page No. 1 / 7 Report Format Version: 6.1.1 Reference No.: 150813E09

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Antenna Gain ...................................................................................................................................... 6 3 Calculation Result of Maximum Conducted Power........................................................................... 7 Report No.: SA120725E01F Page No. 2 / 7 Report Format Version: 6.1.1 Reference No.: 150813E09

Release Control Record Issue No. Description Date Issued SA120725E01F Original release. Sep. 22, 2015 Report No.: SA120725E01F Page No. 3 / 7 Report Format Version: 6.1.1 Reference No.: 150813E09

1 Certificate of Conformity Product: ProSafe 3x3 Dual Radio, Dual Band Wireless Access Point Brand: Netgear Test Model: WNDAP660 Sample Status: ENGINEERING SAMPLE Applicant: Netgear Incorporated. Test Date: July 31, 2012 and Aug. 31, 2015 Standards: FCC Part 2 (Section 2.1091) KDB 447498 DO3 IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample‘s EMC characteristics under the conditions specified in this report. Prepared by : /)/’)o CA \s (}—7’7,, arzg__s_ Date: Sep. 22, 2015 I Phoenix Huang / Specialist Approved by : y gzmoy i* , Date: Sep. 22, 2015 L May Chen /,I‘éfanager Report No.: SA120725E01F Page No. 4 / 7 Report Format Version: 6.1.1 Reference No.: 150813E09

2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time (MHz) Strength (V/m) Strength (A/m) (mW/cm2) (minutes) Limits For General Population / Uncontrolled Exposure 300-1500 … … F/1500 30 1500-100,000 … … 1.0 30 F = Frequency in MHz 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 23cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA120725E01F Page No. 5 / 7 Report Format Version: 6.1.1 Reference No.: 150813E09

2.4 Antenna Gain The antennas provided to the EUT, please refer to the following table: Internal Antenna (For 2.4GHz / 5GHz) Transmitter Antenna Peak Gain (dBi) Connecter Type Circuit Type 2.4GHz 5GHz Band 1 5GHz Band 4 Chain (0) Dipole 2.44 4.36 5.95 i-pex Chain (1) Dipole 2.44 5.31 5.02 i-pex Chain (2) Dipole 2.44 3.87 3.96 i-pex External Antenna (For 2.4GHz) Gain (dBi) Net Gain (dBi) Antenna Cable Loss Model (Exclude cable (Include cable Connecter Type Type (dB) loss ) loss) SMA Plug ANT-32405 Dipole 5 3.68 1.32 Reverse Report No.: SA120725E01F Page No. 6 / 7 Report Format Version: 6.1.1 Reference No.: 150813E09

3 Calculation Result of Maximum Conducted Power For 15.247 (2.4GHz) data was copied from the original test report (Report No.: SA120725E01) Frequency Max Power Antenna Gain Distance Power Density Limit Band (mW) (dBi) (cm) (mW/cm2) (mW/cm2) (MHz) 2412-2462 575.666 7.21 23 0.45552 1 5180-5240 45.134 9.31 23 0.05792 1 5745-5825 266.159 9.79 23 0.38148 1 NOTE: 2.4GHz: Directional gain = 2.44dBi + 10log(3) = 7.21dBi 5GHz (5150-5250MHz): Directional gain = 10 log[(10G1/20 + 10G2/20 + 10G3/20)2 / 3] = 9.31dBi 5GHz (5725-5850MHz): Directional gain = 10 log[(10G1/20 + 10G2/20 + 10G3/20)2 / 3] = 9.79dBi Conclusion: Both of the 2.4GHz and 5GHz can transmit simultaneously, the formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1 CPD = Calculation power density LPD = Limit of power density Therefore, the worst-case situation is 0.45552 / 1 + 0.38148 / 1 = 0.837, which is less than “1”. This confirmed that the device comply with FCC 1.1310 MPE limit. --- END --- Report No.: SA120725E01F Page No. 7 / 7 Report Format Version: 6.1.1 Reference No.: 150813E09


Document Created: 2015-09-30 14:25:33
Document Modified: 2015-09-30 14:25:33
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC