RF Exposure Info.pdf

FCC ID: PY312200202

RF Exposure Info

Download: PDF
FCCID_1733507

RF EXPOSURE REPORT REPORT NO.: SA120524E01 MODEL NO.: WNDAP620 FCC ID: PY312200202 RECEIVED: May 24, 2012 TESTED: May 31 to June 01, 2012 ISSUED: June 20, 2012 APPLICANT: Netgear Incorporated. ADDRESS: 350 East Plumeria Drive San Jose California United States 95134 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA120524E01 1 of 9 Report Format Version 5.0.0

TABLE OF CONTENTS RELEASE CONTROL RECORD ..................................................................................... 3 1. CERTIFICATION ...................................................................................................... 4 2. RF EXPOSURE LIMIT.............................................................................................. 5 3. MPE CALCULATION FORMULA ............................................................................. 5 4. CLASSIFICATION .................................................................................................... 5 5. ANTENNA GAIN....................................................................................................... 6 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ........................... 7 Report No.: SA120524E01 2 of 9 Report Format Version 5.0.0

RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA120524E01 Original release June 20, 2012 Report No.: SA120524E01 3 of 9 Report Format Version 5.0.0

1. CERTIFICATION ProSafe 3x3 Single Radio, Dual Band Wireless-N PRODUCT: Access Point BRAND NAME: Netgear MODEL NO.: WNDAP620 TEST SAMPLE: ENGINEERING SAMPLE APPLICANT: Netgear Incorporated. TESTED: May 31 to June 01, 2012 STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: WNDAP620) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: June 20, 2012 ( Lori Chung, Specialist ) APPROVED BY : , DATE: June 20, 2012 ( May Chen, Deputy Manager ) Report No.: SA120524E01 4 of 9 Report Format Version 5.0.0

2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY ELECTRIC FIELD MAGNETIC FIELD POWER DENSITY AVERAGE TIME RANGE (MHz) STRENGTH (V/m) STRENGTH (A/m) (mW/cm2) (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 … … F/1500 30 1500-100,000 … … 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA120524E01 5 of 9 Report Format Version 5.0.0

5. ANTENNA GAIN The antennas provided to the EUT, please refer to the following table: Internal Antenna (For 2.4GHz / 5GHz) Peak Gain (dBi) Transmitter Antenna Circuit Type 2.4GHz 5GHz Band 1 5GHz Band 4 Chain (0) Dipole 2.3 5.9 5.3 Chain (1) Dipole 2.3 5.9 4.9 Chain (2) Dipole 2.3 5 5.2 External Antenna (For 2.4GHz) Gain (dBi) Net Gain (dBi) Antenna Cable Loss Connecter Model (Exclude cable (Include cable Type (dB) Type loss ) loss) SMA Plug ANT-32405 Dipole 5 3.68 1.32 Reverse Report No.: SA120524E01 6 of 9 Report Format Version 5.0.0

6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER For 15.247(2.4GHz): 802.11b: FREQUENCY ANTENNA POWER MAX POWER DISTANCE LIMIT BAND GAIN DENSITY (mW) (cm) (mW/cm2) (MHz) (dBi) (mW/ cm2) 2412-2462 163.681 7.07 20 0.16585 1.00 Directional gain = gain of antenna element + 10 log (# of TX antenna elements) Effective Legacy Gain (dBi) = 7.07 The effective legacy gain is 7.07 dBi, therefore the limit needs to reduce. 802.11g: FREQUENCY ANTENNA POWER MAX POWER DISTANCE LIMIT BAND GAIN DENSITY (mW) (cm) (mW/cm2) (MHz) (dBi) (mW/ cm2) 2412-2462 587.684 7.07 20 0.59549 1.00 Directional gain = gain of antenna element + 10 log (# of TX antenna elements) Effective Legacy Gain (dBi) = 7.07 The effective legacy gain is 7.07 dBi, therefore the limit needs to reduce. 802.11n(20MHz): FREQUENCY ANTENNA POWER MAX POWER DISTANCE LIMIT BAND GAIN DENSITY (mW) (cm) (mW/cm2) (MHz) (dBi) (mW/ cm2) 2412-2462 450.335 2.3 20 0.15215 1.00 802.11n(40MHz): FREQUENCY ANTENNA POWER MAX POWER DISTANCE LIMIT BAND GAIN DENSITY (mW) (cm) (mW/cm2) (MHz) (dBi) (mW/ cm2) 2422-2452 384.450 2.3 20 0.12989 1.00 Report No.: SA120524E01 7 of 9 Report Format Version 5.0.0

For 15.247(5GHz): 802.11a: FREQUENCY ANTENNA POWER MAX POWER DISTANCE LIMIT BAND GAIN DENSITY (mW) (cm) (mW/cm2) (MHz) (dBi) (mW/ cm2) 5745 ~ 5825 100.739 9.91 20 0.19630 1.00 G1/20 G2/20 G3/20 2 Directional gain = 10 log[(10 + 10 + 10 ) / 3] Effective Legacy Gain (dBi) = 9.91 The effective legacy gain is 9.91 dBi, therefore the limit needs to reduce. 802.11n(20MHz): FREQUENCY ANTENNA POWER MAX POWER DISTANCE LIMIT BAND GAIN DENSITY (mW) (cm) (mW/cm2) (MHz) (dBi) (mW/ cm2) 5745 ~ 5825 102.721 5.30 20 0.06924 1.00 802.11n(40MHz): FREQUENCY ANTENNA POWER MAX POWER DISTANCE LIMIT BAND GAIN DENSITY (mW) (cm) (mW/cm2) (MHz) (dBi) (mW/ cm2) 5755 ~ 5795 92.000 5.30 20 0.06202 1.00 Report No.: SA120524E01 8 of 9 Report Format Version 5.0.0

For 15.407(5GHz): 802.11a: FREQUENCY ANTENNA POWER MAX POWER DISTANCE LIMIT BAND GAIN DENSITY (mW) (cm) (mW/cm2) (MHz) (dBi) (mW/ cm2) 5180 ~ 5240 14.556 10.38 20 0.03161 1.00 G1/20 G2/20 G3/20 2 Directional gain = 10 log[(10 + 10 + 10 ) / 3] Effective Legacy Gain (dBi) = 10.38 The effective legacy gain is 10.38 dBi, therefore the limit needs to reduce. 802.11n(20MHz): FREQUENCY ANTENNA POWER MAX POWER DISTANCE LIMIT BAND GAIN DENSITY (mW) (cm) (mW/cm2) (MHz) (dBi) (mW/ cm2) 5180 ~ 5240 37.716 5.90 20 0.02919 1.00 802.11n(40MHz): FREQUENCY ANTENNA POWER MAX POWER DISTANCE LIMIT BAND GAIN DENSITY (mW) (cm) (mW/cm2) (MHz) (dBi) (mW/ cm2) 5190 ~ 5230 45.508 5.90 20 0.03522 1.00 --- END --- CONCLUSION: Both of the 2.4GHz and 5GHz can transmit simultaneously, the formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1 CPD = Calculation power density LPD = Limit of power density Therefore, the worst-case situation is 0.441 / 1 + 0.441 / 1 = 0.882, which is less than “1”. This confirmed that the device comply with FCC 1.1310 MPE limit. Report No.: SA120524E01 9 of 9 Report Format Version 5.0.0


Document Created: 2012-06-20 11:03:42
Document Modified: 2012-06-20 11:03:42
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC