Coverletter-Modular Approval Request_PY311300172

FCC ID: PY311300172

Cover Letter(s)

Download: PDF
FCCID_1580681

FCC ID: PY311300172 Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch November 3, 2011 Dear Application Examiner, Netgear Incorporated, It’s a UTM Security Wireless Module. FCC ID: PY311300172 would like to have your authorization as a limited modular approval for specific host (UTM9S). The requirements of section 15.212 of FCC rules have been met and shown on the following statements. 1. “The modular transmitter must have its own RF shielding.” This item does not comply .The radio portion of this module does not has its own RF shielded, please see exhibition External Photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs, it is integrated in chip BCM43222. 3. “The modular transmitter must have its own power supply regulation.” The part number of this regulator is FR9882. 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. “The modular transmitter must be tested in a stand-alone configuration” This item does not comply. The EUT was tested with a specific host as above mentioned.. Please see section Photographs of Test Configuration in the test report, the EUT was plugged in this extender. 6. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. Report No.: RF110701C24

FCC ID: PY311300172 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, signature Gary Chang Assistant Manager Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Report No.: RF110701C24


Document Created: 2011-11-03 14:44:29
Document Modified: 2011-11-03 14:44:29
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC