RF Exposure Info

FCC ID: PY306100027

RF Exposure Info

Download: PDF
FCCID_647565

FCC ID: PY306100027 RF EXPOSURE REPORT REPORT NO.: SA950220L16 MODEL NO.: WG302v2 ACCORDING: FCC Guidelines for Human Exposure IEEE C95.1 APPLICANT: NETGEAR, Inc. ADDRESS: 4500 Great America Parkway, Santa Clara, CA 95054, U.S. ISSUED BY: Advance Data Technology Corporation LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang 244, Taipei Hsien, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd., Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. Report No: SA950220L16 1

FCC ID: PY306100027 RF Exposure Measurement (Mobile Device) 1. Introduction In this document, we try to prove the safety of radiation harmfulness to the human body for our product. The limit for Maximum Permissible Exposure (MPE) specified in FCC 1.1310 is followed. The Gain of the antenna used in this product is measured in a Fully Anechoic Chamber (FAC) calibrated for antenna measurement in ADT, and also the maximum total power input to the antenna is measured. Through the Friis transmission formula and the maximum gain of the antenna, we can calculate the distance, away from the product, where the limit of MPE is reached. Although the Friis transmission formula is a far field assumption, the calculated result of that is an over-prediction for near field power density. We will take that as the worst case to specify the safety range. 2. RF Exposure Limit According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Electric Field Magnetic Field Power Density Average Time Range Strength (V/m) Strength (A/m) (mW/cm2) (minutes) (MHz) (A)Limits For Occupational / Control Exposures 300-1500 … … F/300 6 1500-100,000 … … 5 6 (B)Limits For General Population / Uncontrolled Exposure 300-1500 … … F/1500 6 1500-100,000 … … 1.0 30 F = Frequency in MHz Report No: SA950220L16 2

FCC ID: PY306100027 3. Friis Formula Friis transmission formula : Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm If we know the maximum Gain of the antenna and the total power input to the antenna, through the calculation, we will know the MPE value at distance r. Ref. : David K. Cheng, Field and Wave Electromagnetics, Second Edition, Page 640, Eq. (11-133). 4. EUT Operating condition The software provided by Manufacturer enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 5. Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. Warning statement to the user for keeping at least 20cm or more separation distance with the antenna should be included in users manual. So, this device is classified as Mobile Device. Report No: SA950220L16 3

FCC ID: PY306100027 6. Test Results 6.1 Antenna Gain The maximum Gain measured in Fully Anechoic Chamber is -4.64dBi or 0.344(numeric) / -1.69dBi or 0.678(numeric) / 4.59352dBi or 2.879732(numeric) 6.2 Output Power into Antenna & RF Exposure value at distance 20cm: TEST MODE 1 For 802.11b DSSS Modulation Channel Limit of Output Power to Power Density Channel Frequency Power Density Antenna (mW) (mW/cm2) (MHz) (mW/cm2) 1 2412 50.816 0.003473 1.0 6 2437 50.816 0.003473 1.0 11 2462 50.699 0.003465 1.0 For 802.11g OFDM Modulation_Normal Mode Channel Limit of Output Power to Power Density Channel Frequency Power Density Antenna (mW) (mW/cm2) (MHz) (mW/cm2) 1 2412 51.286 0.003505 1.0 6 2437 50.119 0.003426 1.0 11 2462 35.645 0.002436 1.0 For 802.11g OFDM Modulation_Turbo Mode Channel Limit of Output Power to Power Density Channel Frequency Power Density Antenna (mW) (mW/cm2) (MHz) (mW/cm2) 6 2437 50.933 0.003481 1.0 Report No: SA950220L16 4

FCC ID: PY306100027 TEST MODE 2 For 802.11b DSSS Modulation Channel Limit of Output Power to Power Density Channel Frequency Power Density Antenna (mW) (mW/cm2) (MHz) (mW/cm2) 1 2412 50.816 0.007 1.0 6 2437 50.816 0.007 1.0 11 2462 50.699 0.007 1.0 For 802.11g OFDM Modulation_Normal Mode Channel Limit of Output Power to Power Density Channel Frequency Power Density Antenna (mW) (mW/cm2) (MHz) (mW/cm2) 1 2412 51.286 0.007 1.0 6 2437 50.119 0.007 1.0 11 2462 35.645 0.005 1.0 For 802.11g OFDM Modulation_Turbo Mode Channel Limit of Output Power to Power Density Channel Frequency Power Density Antenna (mW) (mW/cm2) (MHz) (mW/cm2) 6 2437 50.933 0.007 1.0 Report No: SA950220L16 5

FCC ID: PY306100027 TEST MODE 3 For 802.11b DSSS Modulation Channel Limit of Output Power to Power Density Channel Frequency Power Density Antenna (mW) (mW/cm2) (MHz) (mW/cm2) 1 2412 50.816 0.029 1.0 6 2437 50.816 0.029 1.0 11 2462 50.699 0.029 1.0 For 802.11g OFDM Modulation_Normal Mode Channel Limit of Output Power to Power Density Channel Frequency Power Density Antenna (mW) (mW/cm2) (MHz) (mW/cm2) 1 2412 51.286 0.029 1.0 6 2437 50.119 0.029 1.0 11 2462 35.645 0.020 1.0 For 802.11g OFDM Modulation_Turbo Mode Channel Limit of Output Power to Power Density Channel Frequency Power Density Antenna (mW) (mW/cm2) (MHz) (mW/cm2) 6 2437 50.933 0.029 1.0 Report No: SA950220L16 6


Document Created: 2006-04-12 13:40:36
Document Modified: 2006-04-12 13:40:36
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC