Test Report Part 3

FCC ID: PY305200014

Test Report

Download: PDF
FCCID_613026

FCC Test Report: FI05062002-A 5. Test of Radiated Emission 5.1. Test Limit Radiated emissions from 30 MHz to 25 GHz were measured according to the methods defines in ANSI C63.4-2003. The EUT was placed, 0.8 meter above the ground plane, as shown in section 5.6.3. The interface cables and equipment positions were varied within limits of reasonable applications to determine the positions producing maximum radiated emissions For unintentional device, according to § 15.109(a), except for Class A digital devices, the field strength of radiated emissions from unintentional radiators at a distance of 3 meters shall not exceed the following values: Frequency Distance Radiated Radiated (MHz) Meters (µ V / M) (dB µ V/ M ) 30-88 3 100 40.0 88-216 3 150 43.5 216-960 3 200 46.0 Above 960 3 500 54.0 For unintentional device, according to CISPR PUB.22, for Class B digital devices, the general requirement of field strength of radiated emissions from intentional radiators at a distance of 10 meters shall not exceed the above table. Frequency Distance Radiated (MHz) Meters (dB µ V/ M ) 30-230 10 30 230-1000 10 37 Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Aug. 01, 2005 37 of 91

FCC Test Report: FI05062002-A 5.2. Test Procedures 1. The EUT was placed on a rotatable table top 0.8 meter above ground. 2. The EUT was set 3 meters from the interference receiving antenna which was mounted on the top of a variable height antenna tower. 3. The table was rotated 360 degrees to determine the position of the highest radiation. 4. The antenna is a broadband antenna and its height is varied between one meter and four meters above ground to find the maximum value of the field strength both horizontal polarization and vertical polarization of the antenna are set to make the measurement. 5. For each suspected emission the EUT was arranged to its worst case and then tune the antenna tower (from 1 M to 4 M) and turn table (from 0 degree to 360 degrees) to find the maximum reading. 6. Set the test-receiver system to Peak or CISPR quasi-peak Detect Function and specified bandwidth with Maximum Hold Mode. 7. If the emission level of the EUT in peak mode was 3 dB lower than the limit specified, then testing will be stopped and peak values of EUT will be reported, otherwise, the emissions which do not have 3 dB margin will be repeated one by one using the quasi-peak method and reported. 8. For testing above 1GHz, the emission level of the EUT in peak mode was 20dB lower than average limit (that means the emission level in peak mode also complies with the limit in average mode), then testing will be stopped and peak values of EUT will be reported, otherwise, the emissions will be measured in average mode again and reported. Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Aug. 01, 2005 38 of 91

FCC Test Report: FI05062002-A 5.3. Typical Test Setup Antenna Equipment under Test * Test distance 0.8M Turn Table Ground Plane Receiver 5.4. Measurement equipment Instrument/Ancillary Type Manufacturer Valid Date EMI Receiver 8546A HP 2006/04/13 Spectrum Analyzer FSP40 R&S 2005/12/28 Horn Antenna 3115 EMCO 2006/02/21 Horn Antenna 3116 EMCO 2006/02/21 Bilog Antenna CBL6112B Schaffner 2006/04/12 Amplifier 8447D Agilent 2006/02/14 Amplifier 8447D Agilent 2006/02/22 Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Aug. 01, 2005 39 of 91

FCC Test Report: FI05062002-A 5.5. Test Result and Data Test Adaptor 1: ADS6818-1812W Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Aug. 01, 2005 40 of 91

Bm ce Poves aC 1200 PoliPhase : jortzorpgt Tost Yode Tranonit Recoive Texporature m C Operstion Chamnel 6 Konadity t % Hodulazion Type 902. !ibig Amospheric Pressures 1018 mite fate 11754 Mips Yero : anssere—10t2r |,Levcwn is : z s 3 O3 Ti Eo Tan sn Tovo Festnenan homeytatg Heter Carrectod Table dnt Progsoney Reading Pactor Result. Linit kasgin Resazk Dog. glbe)— Gba) (@Ba¥/) (Bath) D) (dB) 261. 100 are. 5o 10o jns. : 3 0P 20 in 5o. 46 .00 101. feak szo 100 El 46 .00 4s uP Sz 100 set. 4 46 .00 134. foak so io ase. ssie q600 2. teak 8o 100 Hote: — Result = Meter Reading + Corrected Pactor — Courected Prctor = Autems Pactor + Cable Loss — Arolifiec — The sesolution bandwidth ef teat receiver/sectron analyzer is 12002 and viden bandvidth is 300klz fox Posk detection and Quasi —pook detection a froquency belov 16¢z. 4 The zosolution bandvidth of tost recoinor/spostrum analyzer is Niz and video bandvidth 10 2e for Posk detection at ?requency above 10e 5« The sesolution bandvidth of test receiver/spectrun analyzer is Mz and video bendvidth is 10Ke for Average detection at Freqreacy abore Ohe 6. The other enissions is toe belo to be ressared.

FCC Test Report: FI05062002-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Aug. 01, 2005 42 of 91

Bm comReray Poves a¢ 1200 PoliPhase : yerticap Tost Yods Transnit Recoive Texporature »0O% Operstion Chamnel 6 Konadity To % Hodulazion Type 902,!ibig Amospheric Pressures 1018 mite fate 11754 Mips Yeno : anssere—10tar |,Levttiouam s is v zi o oo Tw sn Tan sin. Tovo Trace: (Dscrete homeyty Heter Carrectol Progsoney Reading Pactor Reslt. Linit Macgin bis) @bat) (dBat/a) (@B) (@dB) 1. Result = Metac Reading + Corrected Pactor 2 Conreated Factor = Antomna Factor + Cable Loss — Anplifies 3. The rosolution bandvidth of tost recoiwer/spostrum analyzer is 12006z and video bandvidth 19 200kie fox Posk detection and Quss: peak detection at Frequency belov 10llz. 4. The sesolution banividth of teat receiver/spectrun analyzer is Niz and video bandvidth is 30z for Pesk detection at {requency above Ohe 5. The sesolution bandvidth of test receiver/spectrum analyzer is 1Mz and video bandvidth is 10}z for Average detection at freqreacy abore lote 6. The other enisstons is toe beloy to be ressured.

FCC Test Report: FI05062002-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Aug. 01, 2005 44 of 91

FCC Test Report: FI05062002-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Aug. 01, 2005 45 of 91

FCC Test Report: FI05062002-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Aug. 01, 2005 46 of 91

Bit : nmReraX Pover : AC 1207 Pol Phase : YERTICAL Test Yode : Transnit/Receive Tenperature : 30 C Operation Channel: 6 Kumidi ty 9 % Nodulation Type : $02.11b Atmospheric Pressures 1018 waile Rate i1 Nops Yemo : ADs—c818—1812—4 107 Level @Bn/m 5| s t { 4 ® 1000 Seon. 10600. 15a00. 20200. 25000 ts werieer Frequency ts Neter Corrected Table Ant Frequency Reading Ractor Resnlt Linit Morgin Renark Deg. Kigh (ile) (dBa) (dBa¥/m) (dBu¥/a) (4B) (3B) (ca) 2o20.0e 51.30 C 14200 22030 Posk 25— i0o 2520 u0e So l 54200 213205 Averaze 235 100 47000 1027 50000 .0010 Averase 527— 100 aste ts $2.40 74.00 —14.08 Peak 270 oo polo.ge 36. ; : 54.00 —0.73.. Averaze 237. 100 Tslo.se 46 .42 M.14 50.56 74.00 —14.44 Peak — Result = Meter Reading + Corrected Pactor — Contected Pactor = Anterna Factor + Cable Loss — Auplifier — The resolution bandvidth of test receiver/spectrun analyzer is 120X and video bandvidth is 300ke for Peak detection and Quasi—peak detection at frequency below 16z. 4. The resolution bandvidth of test receiver/spectrun analyzer is Dz and video bandvidth is 3lKe for Peak detection at frequency above 16Ke. 5. The resolution bandvidth of test receiver/spectrun analyzer is ND(z and video bandvidth is 10e for Average detection at frequency above 16Ke. 5. The other emissions is too below to be neasured.

FCC Test Report: FI05062002-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Aug. 01, 2005 48 of 91

FCC Test Report: FI05062002-A Exclusive Certification Corp. Tel:886-2-2792-3366 Fax:886-2-2792-1100 Issued date: Aug. 01, 2005 49 of 91


Document Created: 2005-08-03 19:32:03
Document Modified: 2005-08-03 19:32:03
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC