Copy of Original Grant

FCC ID: PY3-FVM318

Cover Letter(s)

Download: PDF
FCCID_354414

TCB                                               GRANT OF EQUIPMENT
                                                    AUTHORIZATION                                                 TCB
                                                     Certification
                                            Issued Under the Authority of the
                                          Federal Communications Commission
                                                          By:

                                                Timco Engineering, Inc.
                                                849 NW State Road 45                              Date of Grant: 01/02/2003
                                                P.O. Box 370,
                                                Newberry, FL 32669                           Application Dated: 01/02/2003
                                                United States
Netgear Incorporated
4500 Great America Parkway
Santa Clara, CA 95054
United States

Attention: Mark Merrill , VP Engineering

                                                   NOT TRANSFERABLE
                      EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and
                      is VALID ONLY for the equipment identified hereon for use under the
                      Commission's Rules and Regulations listed below.

                          FCC IDENTIFIER: PY3-FVM318
                          Name of Grantee: Netgear Incorporated
                          Equipment Class: Part 15 Spread Spectrum Transmitter
                          Notes:           Wireless Router
                                                         Frequency        Output              Frequency         Emission
Grant Notes                   FCC Rule Parts            Range (MHZ)        Watts              Tolerance        Designator
05                            15C                      2412.0 - 2462.0     0.011

Output power is conducted. The antenna(s) used for this transmitter must be installed
to provide a separation distance of at least 20 cm from all persons and must not be co-
located or operating in conjunction with any other antenna or transmitter. End-users
and installers must be provided with antenna installation instructions and transmitter
operating conditions for satisfying RF exposure compliance.

05: The manufacture and importation of this device must cease on July 10, 2005, pursuant to 15.37(j) or 18.123 transition
    provisions adopted under FCC 02-157 (ET Docket 98-80).




https://gullfoss2.fcc.gov/prod/oet/cf/tcb/reports/Tcb731GrantForm.cfm?mode=COPY&ap...                            8/26/2003



Document Created: 2003-08-26 17:12:48
Document Modified: 2003-08-26 17:12:48

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC