SAR report two

FCC ID: PXAPP5N20-1G9

RF Exposure Info

Download: PDF
FCCID_614122

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH Appendix B Measurement Plots ETS Dr. Genz GmbH, Germany Registration number: G0M20505-9484-S-2 Appendix B

Date/Time: 05/24/05 07:31:58 Test Laboratory: ELECTRONIC TECHNOLOGY SYSTEMS DR. GENZ GMBH Dipol Valid.1900(h)_250mW_24.5.05 DUT: Dipole 1900 MHz; Type: D1900V2; Serial: 5d025 Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: Head 1900 MHz Medium parameters used: f = 1900 MHz; σ = 1.42 mho/m; εr = 39.9; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: z Probe: ET3DV6 - SN1711; ConvF(5.2, 5.2, 5.2); Calibrated: 12/16/2003 z Sensor-Surface: 4mm (Mechanical And Optical Surface Detection) z Electronics: DAE3 Sn522; Calibrated: 1/12/2004 z Phantom: SAM 12; Type: TP-1217; Serial: QD000P40CA z Measurement SW: DASY4, V4.4 Build 3; Postprocessing SW: SEMCAD, V1.8 Build 130 Dipol 1900 (250mW)/Area Scan (61x81x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 11.5 mW/g Dipol 1900 (250mW)/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 87.7 V/m; Power Drift = -0.0 dB Peak SAR (extrapolated) = 17.5 W/kg SAR(1 g) = 9.98 mW/g; SAR(10 g) = 5.2 mW/g Maximum value of SAR (measured) = 11.2 mW/g 0 dB = 11.2mW/g

Date/Time: 05/26/05 07:21:49 Test Laboratory: ELECTRONIC TECHNOLOGY SYSTEMS DR. GENZ GMBH Dipol Valid.1900(m)_250mW26.5.05 DUT: Dipole 1900 MHz; Type: D1900V2; Serial: 5d025 Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: Muscle 1900 MHz Medium parameters used: f = 1900 MHz; σ = 1.58 mho/m; εr = 51.9; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: z Probe: ET3DV6 - SN1711; ConvF(4.6, 4.6, 4.6); Calibrated: 12/16/2003 z Sensor-Surface: 4mm (Mechanical And Optical Surface Detection) z Electronics: DAE3 Sn522; Calibrated: 1/12/2004 z Phantom: SAM 12; Type: TP-1217; Serial: QD000P40CA z Measurement SW: DASY4, V4.4 Build 3; Postprocessing SW: SEMCAD, V1.8 Build 130 Dipol 1900 (250mW)/Area Scan (61x81x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 12.8 mW/g Dipol 1900 (250mW)/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 90.7 V/m; Power Drift = -0.1 dB Peak SAR (extrapolated) = 18.6 W/kg SAR(1 g) = 10.8 mW/g; SAR(10 g) = 5.66 mW/g Maximum value of SAR (measured) = 12.3 mW/g 0 dB = 12.3mW/g

Date/Time: 05/24/05 11:17:58 Test Laboratory: ELECTRONIC TECHNOLOGY SYSTEMS DR. GENZ GMBH right_ch0_cheek DUT: KIRK telecomA/S; Type: 1.9GHz Communication System (portable part); Serial: PP5N40-1G9 Communication System: 1.9 GHz DECT; Frequency: 1908 MHz;Duty Cycle: 1:12.3 Medium: Head 1900 MHz Medium parameters used: f = 1908 MHz; σ = 1.43 mho/m; εr = 39.8; ρ = 1000 kg/m3 Phantom section: Right Section DASY4 Configuration: z Probe: ET3DV6 - SN1711; ConvF(5.2, 5.2, 5.2); Calibrated: 12/16/2003 z Sensor-Surface: 4mm (Mechanical And Optical Surface Detection) z Electronics: DAE3 Sn522; Calibrated: 9/11/2002 z Phantom: SAM 12; Type: TP-1217; Serial: QD000P40CA z Measurement SW: DASY4, V4.4 Build 3; Postprocessing SW: SEMCAD, V1.8 Build 130 PP5N40/Area Scan (71x131x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.039 mW/g PP5N40/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.17 V/m; Power Drift = 0.009 dB Peak SAR (extrapolated) = 0.069 W/kg SAR(1 g) = 0.036 mW/g; SAR(10 g) = 0.020 mW/g Maximum value of SAR (measured) = 0.039 mW/g 0 dB = 0.039mW/g

Date/Time: 05/24/05 10:45:14 Test Laboratory: ELECTRONIC TECHNOLOGY SYSTEMS DR. GENZ GMBH right_ch2_cheek DUT: KIRK telecomA/S; Type: 1.9GHz Communication System (portable part); Serial: PP5N40-1G9 Communication System: 1.9 GHz DECT; Frequency: 1905 MHz;Duty Cycle: 1:12.3 Medium: Head 1900 MHz Medium parameters used: f = 1905 MHz; σ = 1.42 mho/m; εr = 39.8; ρ = 1000 kg/m3 Phantom section: Right Section DASY4 Configuration: z Probe: ET3DV6 - SN1711; ConvF(5.2, 5.2, 5.2); Calibrated: 12/16/2003 z Sensor-Surface: 4mm (Mechanical And Optical Surface Detection) z Electronics: DAE3 Sn522; Calibrated: 9/11/2002 z Phantom: SAM 12; Type: TP-1217; Serial: QD000P40CA z Measurement SW: DASY4, V4.4 Build 3; Postprocessing SW: SEMCAD, V1.8 Build 130 PP5N40/Area Scan (71x131x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.039 mW/g PP5N40/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.21 V/m; Power Drift = 0.0 dB Peak SAR (extrapolated) = 0.067 W/kg SAR(1 g) = 0.036 mW/g; SAR(10 g) = 0.020 mW/g Maximum value of SAR (measured) = 0.039 mW/g 0 dB = 0.039mW/g

Date/Time: 05/24/05 10:13:42 Test Laboratory: ELECTRONIC TECHNOLOGY SYSTEMS DR. GENZ GMBH right_ch2_tilted DUT: KIRK telecomA/S; Type: 1.9GHz Communication System (portable part); Serial: PP5N40-1G9 Communication System: 1.9 GHz DECT; Frequency: 1905 MHz;Duty Cycle: 1:12.3 Medium: Head 1900 MHz Medium parameters used (interpolated): f = 1905 MHz; σ = 1.42 mho/m; εr = 39.8; ρ = 1000 kg/m3 Phantom section: Right Section DASY4 Configuration: z Probe: ET3DV6 - SN1711; ConvF(5.2, 5.2, 5.2); Calibrated: 12/16/2003 z Sensor-Surface: 4mm (Mechanical And Optical Surface Detection) z Electronics: DAE3 Sn522; Calibrated: 9/11/2002 z Phantom: SAM 12; Type: TP-1217; Serial: QD000P40CA z Measurement SW: DASY4, V4.4 Build 3; Postprocessing SW: SEMCAD, V1.8 Build 130 PP5N40/Area Scan (71x131x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.033 mW/g PP5N40/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.79 V/m; Power Drift = -0.0 dB Peak SAR (extrapolated) = 0.066 W/kg SAR(1 g) = 0.031 mW/g; SAR(10 g) = 0.017 mW/g Maximum value of SAR (measured) = 0.034 mW/g 0 dB = 0.034mW/g

Date/Time: 05/24/05 11:50:11 Test Laboratory: ELECTRONIC TECHNOLOGY SYSTEMS DR. GENZ GMBH right_ch4_cheek DUT: KIRK telecomA/S; Type: 1.9GHz Communication System (portable part); Serial: PP5N40-1G9 Communication System: 1.9 GHz DECT; Frequency: 1901 MHz;Duty Cycle: 1:12.3 Medium: Head 1900 MHz Medium parameters used: f = 1901 MHz; σ = 1.42 mho/m; εr = 39.9; ρ = 1000 kg/m3 Phantom section: Right Section DASY4 Configuration: z Probe: ET3DV6 - SN1711; ConvF(5.2, 5.2, 5.2); Calibrated: 12/16/2003 z Sensor-Surface: 4mm (Mechanical And Optical Surface Detection) z Electronics: DAE3 Sn522; Calibrated: 9/11/2002 z Phantom: SAM 12; Type: TP-1217; Serial: QD000P40CA z Measurement SW: DASY4, V4.4 Build 3; Postprocessing SW: SEMCAD, V1.8 Build 130 PP5N40/Area Scan (71x131x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.039 mW/g PP5N40/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.12 V/m; Power Drift = 0.0 dB Peak SAR (extrapolated) = 0.068 W/kg SAR(1 g) = 0.036 mW/g; SAR(10 g) = 0.020 mW/g Maximum value of SAR (measured) = 0.039 mW/g 0 dB = 0.039mW/g

Date/Time: 05/24/05 07:45:28 Test Laboratory: ELECTRONIC TECHNOLOGY SYSTEMS DR. GENZ GMBH left_ch2_cheek DUT: KIRK telecomA/S; Type: 1.9GHz Communication System (portable part); Serial: PP5N40-1G9 Communication System: 1.9 GHz DECT; Frequency: 1905 MHz;Duty Cycle: 1:12.3 Medium: Head 1900 MHz Medium parameters used (interpolated): f = 1905 MHz; σ = 1.42 mho/m; εr = 39.8; ρ = 1000 kg/m3 Phantom section: Left Section DASY4 Configuration: z Probe: ET3DV6 - SN1711; ConvF(5.2, 5.2, 5.2); Calibrated: 12/16/2003 z Sensor-Surface: 4mm (Mechanical And Optical Surface Detection) z Electronics: DAE3 Sn522; Calibrated: 9/11/2002 z Phantom: SAM 12; Type: TP-1217; Serial: QD000P40CA z Measurement SW: DASY4, V4.4 Build 3; Postprocessing SW: SEMCAD, V1.8 Build 130 PP5N40/Area Scan (71x131x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.039 mW/g PP5N40/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.41 V/m; Power Drift = 0.1 dB Peak SAR (extrapolated) = 0.064 W/kg SAR(1 g) = 0.035 mW/g; SAR(10 g) = 0.020 mW/g Maximum value of SAR (measured) = 0.039 mW/g 0 dB = 0.039mW/g

Date/Time: 05/24/05 09:37:33 Test Laboratory: ELECTRONIC TECHNOLOGY SYSTEMS DR. GENZ GMBH left_ch2_tilted DUT: KIRK telecomA/S; Type: 1.9GHz Communication System (portable part); Serial: PP5N40-1G9 Communication System: 1.9 GHz DECT; Frequency: 1905 MHz;Duty Cycle: 1:12.3 Medium: Head 1900 MHz Medium parameters used (interpolated): f = 1905 MHz; σ = 1.42 mho/m; εr = 39.8; ρ = 1000 kg/m3 Phantom section: Left Section DASY4 Configuration: z Probe: ET3DV6 - SN1711; ConvF(5.2, 5.2, 5.2); Calibrated: 12/16/2003 z Sensor-Surface: 4mm (Mechanical And Optical Surface Detection) z Electronics: DAE3 Sn522; Calibrated: 9/11/2002 z Phantom: SAM 12; Type: TP-1217; Serial: QD000P40CA z Measurement SW: DASY4, V4.4 Build 3; Postprocessing SW: SEMCAD, V1.8 Build 130 PP5N40/Area Scan (71x131x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.030 mW/g PP5N40/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.82 V/m; Power Drift = 0.007 dB Peak SAR (extrapolated) = 0.055 W/kg SAR(1 g) = 0.027 mW/g; SAR(10 g) = 0.015 mW/g Maximum value of SAR (measured) = 0.029 mW/g 0 dB = 0.029mW/g

Date/Time: 05/26/05 07:49:56 Test Laboratory: ELECTRONIC TECHNOLOGY SYSTEMS DR. GENZ GMBH flat_ch2_front_15mm DUT: KIRK telecomA/S; Type: 1.9GHz Communication System (portable part); Serial: PP5N40-1G9 Communication System: 1.9 GHz DECT; Frequency: 1905 MHz;Duty Cycle: 1:12.3 Medium: Muscle 1900 MHz Medium parameters used: f = 1905 MHz; σ = 1.57 mho/m; εr = 51.8; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: z Probe: ET3DV6 - SN1711; ConvF(4.6, 4.6, 4.6); Calibrated: 12/16/2003 z Sensor-Surface: 4mm (Mechanical And Optical Surface Detection) z Electronics: DAE3 Sn522; Calibrated: 9/11/2002 z Phantom: SAM 12; Type: TP-1217; Serial: QD000P40CA z Measurement SW: DASY4, V4.4 Build 3; Postprocessing SW: SEMCAD, V1.8 Build 130 PP5N40/Area Scan (71x171x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.00865 mW/g PP5N40/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 2.17 V/m; Power Drift = -0.1 dB Peak SAR (extrapolated) = 0.012 W/kg SAR(1 g) = 0.00805 mW/g; SAR(10 g) = 0.00534 mW/g Maximum value of SAR (measured) = 0.00888 mW/g 0 dB = 0.00888mW/g

Date/Time: 05/26/05 11:00:21 Test Laboratory: ELECTRONIC TECHNOLOGY SYSTEMS DR. GENZ GMBH flat_ch2_back_15mm DUT: KIRK telecomA/S; Type: 1.9GHz Communication System (portable part); Serial: PP5N40-1G9 Communication System: 1.9 GHz DECT; Frequency: 1905 MHz;Duty Cycle: 1:12.3 Medium: Muscle 1900 MHz Medium parameters used: f = 1905 MHz; σ = 1.57 mho/m; εr = 51.8; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: z Probe: ET3DV6 - SN1711; ConvF(4.6, 4.6, 4.6); Calibrated: 12/16/2003 z Sensor-Surface: 4mm (Mechanical And Optical Surface Detection) z Electronics: DAE3 Sn522; Calibrated: 9/11/2002 z Phantom: SAM 12; Type: TP-1217; Serial: QD000P40CA z Measurement SW: DASY4, V4.4 Build 3; Postprocessing SW: SEMCAD, V1.8 Build 130 PP5N40/Area Scan (71x171x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.00748 mW/g PP5N40/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.33 V/m; Power Drift = 0.1 dB Peak SAR (extrapolated) = 0.012 W/kg SAR(1 g) = 0.00697 mW/g; SAR(10 g) = 0.00481 mW/g Maximum value of SAR (measured) = 0.00742 mW/g 0 dB = 0.00742mW/g

Date/Time: 05/26/05 13:16:37 Test Laboratory: ELECTRONIC TECHNOLOGY SYSTEMS DR. GENZ GMBH flat_ch2_front_0mm DUT: KIRK telecomA/S; Type: 1.9GHz Communication System (portable part); Serial: PP5N40-1G9 Communication System: 1.9 GHz DECT; Frequency: 1905 MHz;Duty Cycle: 1:12.3 Medium: Muscle 1900 MHz Medium parameters used: f = 1905 MHz; σ = 1.57 mho/m; εr = 51.8; ρ = 1000 kg/m3 Phantom section: Flat Section DASY4 Configuration: z Probe: ET3DV6 - SN1711; ConvF(4.6, 4.6, 4.6); Calibrated: 12/16/2003 z Sensor-Surface: 4mm (Mechanical And Optical Surface Detection) z Electronics: DAE3 Sn522; Calibrated: 9/11/2002 z Phantom: SAM 12; Type: TP-1217; Serial: QD000P40CA z Measurement SW: DASY4, V4.4 Build 3; Postprocessing SW: SEMCAD, V1.8 Build 130 PP5N40/Area Scan (71x171x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.040 mW/g PP5N40/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 3.28 V/m; Power Drift = 0.0 dB Peak SAR (extrapolated) = 0.067 W/kg SAR(1 g) = 0.035 mW/g; SAR(10 g) = 0.019 mW/g Maximum value of SAR (measured) = 0.038 mW/g 0 dB = 0.038mW/g

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH Appendix C Pictures ETS Dr. Genz GmbH, Germany Registration number: G0M20505-9484-S-2 Appendix C

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH Appendix C. Pictures ETS Dr. Genz GmbH, Germany Registration number: G0M20505-9484-S-2 Appendix C

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20505-9484-S-2 Appendix C

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20505-9484-S-2 Appendix C

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20505-9484-S-2 Appendix C

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20505-9484-S-2 Appendix C

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20505-9484-S-2 Appendix C

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20505-9484-S-2 Appendix C

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20505-9484-S-2 Appendix C

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20505-9484-S-2 Appendix C

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20505-9484-S-2 Appendix C


Document Created: 2005-11-08 13:02:48
Document Modified: 2005-11-08 13:02:48
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC