manual

FCC ID: PWO824D

Users Manual

Download: PDF
FCCID_383218

DIRECT CONNECTION
                                           Installation Guide
             Vehicle & Building




                                         AMPS                                    iDEN
                                  DIRECT CONNECTION                      DIRECT CONNECTION
                                      AMPLIFIER                              AMPLIFIER
                                      Part# 811101                           Part# 814001
                                     FCC ID: PWO824D                            FCC ID: PWO806D
                                      IC: 4726A-824D                             IC: 4726A-806D

                                             Wilson Electronics, Inc.
                                        3301 E. Deseret Drive, St. George, Utah 84790
                                            For additional technical support go to
                                                www.wilsonelectronics.com
                                       Phone: 1-866-294-1660       Fax: 1-435-656-2432
                                     The term “IC:” before the radio certification number only signifies
                                        that Industry of Canada technical specifications were met.


1. PURPOSE OF THE DIRECT CONNECTION AMPLIFIER
  The Direct Connection     Bi-directional Amplifier improves RF coverage in areas
  with no signal or low     signal strength. Part# 811101 Amplifies the signal on
  800MHz up to 3 watts      and allows for the full benefit of the outside antenna on
  1900MHz frequencies.       Part# 814001 Amplifies the iDEN (Nextel) frequencies
  up to 3 watts.
2. PACKAGE CONTENTS
  2.1 Bi-directional Direct Connection Amplifier.
  2.2 DC plug-in power supply with ON/OFF switch.
  2.3 6ft. Adapter Extension Cable.
                                 Package Contents




                                            6FT ADAPTER
                                          EXTENSION CABLE
                                                            DC PLUG-IN
                                                          POWER SUPPLY
                     AMPLIFIER



3. HOW THE DIRECT CONNECTION AMPLIFIER FUNCTIONS
  When using 800 MHz the signal is received by the outside antenna from the cell site.
  The signal is then AMPLIFIED and transmitted into your phone through the adapter
  (sold separately). When the phone transmits, the signal is sent to the amplifier through
  the adapter then AMPLIFIED and sent to the cell site through the outside antenna.
  When using 1900MHz (PCS) the signal bypasses the amplifier’s circuitry while getting
  full benefit from the outside antenna.
 NOTE: Amplifier #814001 does not have a 1900MHz (PCS) bypass as iDEN
       (Nextel) does not utilize this frequency.
                                           2


4. AMPLIFIER INSTALLATION (see illustration on pg.4)
4.1 Installing the Wilson Cellular Antenna
   4.1.1 See antenna packaging for model specific instructions.
4.2 Installing The Amplifier
   4.2.1 Select a suitable location to mount the AMPLIFIER.
          • In vehicle installation - under the dash or vehicle seat
          • In building installation - on a wall or ceiling
   NOTE: Mount the AMPLIFIER away from direct sunlight, excessive heat and/
             or moisture. The amplifier needs proper ventilation. DO NOT place
             the amplifier in an air-tight enclosure.
   4.2.2 Connect the outside antenna to the AMPLIFIER side labeled “OUTSIDE
          ANTENNA”.
   4.2.3 Connect the ADAPTER EXTENSION CABLE to the AMPLIFIER side
          labeled “CELLULAR PHONE”.
   4.2.4 An external antenna adapter is required (sold separately) to connect the
           AMPLIFIER to the cellphone. External antenna adapters connect directly to
           the antenna extension cable.
    4.2.5 Connect the DC power supply to the AMPLIFIER. Verify that both the
          OUTSIDE ANTENNA and the ADAPTER EXTENSION CABLE
          are connected before powering up the AMPLIFIER.
    NOTE: Visit our website at www.wilsonelectronics.com for the latest adapter
          cross reference chart. If your phone’s adapter is not available from your
          retailer contact us at 1-866-294-6996 and we will help you locate one in
          your area. For further assistance contact our technical support Toll-Free
          at 866-294-1660.
    NOTE: iDEN Antennas are recommended for iDEN Amplifier 814001.

The information provided by Wilson Electronics, Inc. is believed to be complete and accurate.
However, no responsibility is assumed by Wilson Electronics, Inc. for any business or per-
sonal losses arising from its use, or for any infringements of patents or other rights of third
parties that may result from its use.
                                              Copyright © 2003 Wilson Electronics, Inc.

                                              3


                                                                      In-Building
                               ������� �������
                                    �������� ����
                                                                      Installation
                                   ������� �����
����
����




                                 ������� ������� ��
                                ��������� ����������


                                          �����
                                          �����������          ����
                       ���������          ����������          �����




                                                                        Mobile
                                                                      Installation
                      �������                                ����
                      �������                                ����
                     ���� ���������




                   ���������

                                          ��� ��
                                           �����
                                          �������
                                         ��������� �������
                                          ���� ����������
       ���������


                               4


5. AMPLIFIER SPECIFICATIONS

  DIRECT CONNECTION AMPLIFIER PHYSICAL SPECIFICATIONS
  Connectors          FME-Male 50 Ohms
  Dimensions          5.5x4.3x1.4 (inch) or 14.0x10.8x3.5 (cm)
  Weight              1.32 Pounds or 600G



AMPS #811101 AMPLIFIER SPECIFICATIONS
 Frequency                    824-849MHz Uplink 869-894MHz Downlink
 Gain (up/down)                     Cell Site Controlled-Max 10/10
 Flatness (up/down)                         (+/- 2dB / +/-2dB)
 Max RF (up/down)                           (+35dBm/+15dBm)
 Noise Figure (down)                        (3.5dB@881MHz)
 Isolation                                Uplink/Downlink 90dB
 Power Consumption                             1.5A@12V


iDEN #814001 AMPLIFIER SPECIFICATIONS
 Frequency                    806-821MHz Uplink 851-866MHz Downlink
 Gain (up/down)                     Cell Site Controlled-Max 10/10
 Flatness (up/down)                         (+/- 2dB / +/-2dB)
 Max RF (up/down)                           (+35dBm/+15dBm)
 Noise Figure (down)                        (3.5dB@881MHz)
 Isolation                                Uplink/Downlink 90dB
 Power Consumption                             1.5A@12V
                                      5


6. OPTIONAL ACCESSORIES/ANTENNA OPTIONS
  6.1 Coax Cable Extensions 50Ω (see chart on pg.7)
  6.2 Antenna Options (see chart on pg. 8)
  6.3 N-Female To FME-Female Adapter - Adapts 9913 Coax to the
      811101/814001 Bi-directional Amplifier.
  6.4 Lightning Suppressor (In-Building application)
      WARNING: Lightning protection is recommended for all In-Building
      installations.
  6.5 Hardwire Power Supply Kit.

                              Optional Accessories
                       �������� ��        ���� ����� ���������      ��������
                       ����������          ����� ��� ���� ����   ����� ������ ���




                   ��������� ����������




8. WARNINGS
  WARNING: Verify that both the outside antenna and adapter extension cable are
  connected before powering up the AMPLIFIER.
  WARNING: (MOBILE ONLY) The outside antenna used with this ampli-
  fier must be mounted with a separation distance of at least 8 inches from all
  persons and must not be co-located or operating in conjunction with any other
  antenna or amplifier. Use of a cellular amplifier with antenna gains higher than
  5.12dBi is in violation of FCC regulations for which the offender is fully liable.
  All Wilson Mobile Antennas are 5.12dBi or less.
  WARNING: (IN-BUILDING ONLY) Lightning protection is recommended for all
  in-building installations.
  WARNING: (IN-BUILDING ONLY) When using in-building, the outside antenna
  must be fixed-mounted on an outdoor permanent structure with a separation of at
  least 20 feet from all persons during normal operation.
                                              6


7. TECH SUPPORT
    If you need further assistance with your installation:
         1) Call us Toll-Free at 866-294-1660
         2) E-mail tech support at tech@wilsonelectronics.com
         3) Go to www.wilsonelectronics.com
    Our Hours of Operation are: 8:00 AM – 4:30 PM (Mountain Time)

    EXTENSION CABLE CHART (RG 58 - FME connectors / 9913 - N connectors)

  951101       5’ Extension Cable RG 58                   (0.6 db loss)
               Low Loss Coax
  951102       10’ Extension Cable RG 58                  (1.2 db loss)
               Low Loss Coax
  951103       15’ Extension Cable RG 58                  (1.8 db loss)
               Low Loss Coax
  951104       20’ Extension Cable RG 58                  (2.4 db loss) Used with the Yagi
               Low Loss Coax                              Antenna - (N-Male to FME Female)
  951108       20’ Extension Cable 9913                   Only use 9913 Low Loss Coax for
               Ultra Low Loss Coax                        extensions 20’ or longer (0.8 db loss)
  951105       30’ Extension Cable 9913                   (1.2 db loss)
               Ultra Low Loss Coax
  951106       50’ Extension Cable 9913                   (2.0 db loss)
               Ultra Low Loss Coax
  951107       100’ Extension 9913 Low                    (4.0 db loss)
               Loss Coax

Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of this device.
Leaving the amplifier on in an unused vehicle for days may drain your battery. This can be avoided by
plugging into an ignition switched outlet or by using the small white switch located on the power supply.
                                                      7


                        Outside Antenna Options
                                         For more options visit
                                       www.wilsonelectronics.com




                                                            ����
                                                         �����������
                                                    ��������� ����


   Pictures Are Not To Scale
    Not All Outside Antenna
      Options Are Shown
        Questions?
      1-866-294-1660
 www.wilsonelectronics.com




                                                ������                   ���               �����               �������
���� ������             ���� �����              �����                    �����             �����            ������ �����
 ���������              ���������               ���������               ���������         ���������           ���������




                                                                       1 YEAR WARRANTY
     15 DAY
                                         The Wilson amplifier is warranted for one year against defects in workmanship
   MONEY BACK
                                     and/or materials and will be repaired or replaced, at the discretion of the manufac-
   GUARANTEE                         turer, to the original purchaser with dated proof of purchase or sales receipt.
                                         If you have questions about your amplifier please call technical support
  All Wilson products                call 1-866-294-1660 or E-mail tech@wilsonelectronics.com
     have a 15 day                       Most warranty cases can be handled by taking the amplifier and the re-
      money back                     ceipt to the store where it was purchased. If inconvenient, the amplifier and a
    guarantee with                   copy of the receipt, may be sent to the factory, at purchasers expense, where
                                     it may be repaired or replaced and returned shipping paid. Warranty does not
  Proof of Purchase
                                     cover damages caused by abuse, misuse, and negligence.



                                                              8



Document Created: 2003-11-07 14:41:11
Document Modified: 2003-11-07 14:41:11

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC