[Re-Sent]Sample Request E-mail generated [Oct 31 2013]

FCC ID: PWO460004

Cover Letter(s)

Download: PDF
FCCID_2107602

To: Donald H. Blohm, dblohm@wilsonelectronics.com From: Tim Harrington Tim.Harrington@fcc.gov FCC Equipment Authorization Branch Applicant: Wilson Electronics, LLC FCC ID: PWO460004 731 Confirmation Number: TC587896 Date of Original E-Mail: 10/31/2013 Subject: FCC Equipment Authorization System Pursuant to Section 2.943 of the Commission's Rules, please forward a sample of the above referenced equipment to the FCC laboratory for the purpose of sample testing. If a production sample isn't available, please submit the equipment used for generating the FCC Test Report or a prototype identical to it. You will have a preiod of 60 days from the date of this letter to supply the requested sample, or your application may be dismissed pursuant to Section 2.917(c). We have determined that 60 days is a reasonable time limit in which to supply the requested sample. Requests for extention of this time will be accepted in writing only, and must provide an explanation of the circumstances which necessitate an extension. A request for extension will only be granted under extenuating circumstances. The sample and all related accessories including the connecting cables used to generate the test results should be submitted. ALL samples and accessories must be properly labeled with the IDENTICAL identification as referenced above. The sample MUST be shipped with charges PREPAID. To avoid delays in testing and return of the equipment, a copy of this correspondence and the return shipment information listed below should accompany your shipment. Please address the shipping container to the attention of the sender of the correspondence. Instructions for shipping samples may be found on the Internet at (https://apps.fcc.gov/oetcf/eas/misc/EasFaq.cfm). In order to expedite the testing and return of the sample please submit the following information with the sample: 1) Provide a list of each piece of equipment submitted, it's FCCID, model number, and serial number. 2) Provide the complete shipping address along with the name, email, and US phone number for the contact person to which the sample should be returned. 3) Indicate whether or not the equipment should be returned when testing is completed. 4) Indicate the preferred carrier for return shipment and the account number.


Document Created: 2013-10-31 15:02:59
Document Modified: 2013-10-31 15:02:59
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC