SAR Appendix 16.2

FCC ID: PU5-TP00045A1TS

RF Exposure Info

Download: PDF
FCCID_1869305

Test Laboratory: UL CCS SAR Lab D Date/Time: 9/25/2012 W-CDMA Band V Frequency: 826.4 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 826.4 MHz; σ = 0.975 mho/m; εr = 54.2; ρ = 1000 kg/m ; DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn500; Calibrated: 6/13/2012 - Probe: EX3DV4 - SN3749; ConvF(8.84, 8.84, 8.84); Calibrated: 1/27/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: SN:1017 Rear Touch/Rel.99/Ch4132/Area Scan (11x15x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.959 mW/g Rear Touch/Rel.99/Ch4132/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 33.0 V/m; Power Drift = -0.018 dB Peak SAR (extrapolated) = 1.53 W/kg SAR(1 g) = 0.828 mW/g; SAR(10 g) = 0.446 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.03 mW/g 0 dB = 1.03mW/g

Test Laboratory: UL CCS SAR Lab D Date/Time: 9/24/2012 W-CDMA Band V Frequency: 836.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.986 mho/m; εr = 54.1; ρ = 1000 kg/m ; DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn500; Calibrated: 6/13/2012 - Probe: EX3DV4 - SN3749; ConvF(8.84, 8.84, 8.84); Calibrated: 1/27/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: SN:1017 Rear Touch/Rel.99/Ch4183/Area Scan (11x15x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.00 mW/g Rear Touch/Rel.99/Ch4183/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 31.7 V/m; Power Drift = 0.021 dB Peak SAR (extrapolated) = 1.60 W/kg SAR(1 g) = 0.856 mW/g; SAR(10 g) = 0.460 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.07 mW/g 0 dB = 1.07mW/g

Test Laboratory: UL CCS SAR Lab D Date/Time: 9/25/2012 W-CDMA Band V Frequency: 846.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 846.6 MHz; σ = 0.997 mho/m; εr = 53.9; ρ = 1000 kg/m ; DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn500; Calibrated: 6/13/2012 - Probe: EX3DV4 - SN3749; ConvF(8.84, 8.84, 8.84); Calibrated: 1/27/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: SN:1017 Rear Touch/Rel.99/Ch4233/Area Scan (11x15x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.917 mW/g Rear Touch/Rel.99/Ch4233/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 32.2 V/m; Power Drift = -0.132 dB Peak SAR (extrapolated) = 1.53 W/kg SAR(1 g) = 0.830 mW/g; SAR(10 g) = 0.446 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.02 mW/g 0 dB = 1.02mW/g

Test Laboratory: UL CCS SAR Lab D Date/Time: 9/24/2012 W-CDMA Band V Frequency: 826.4 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 826.4 MHz; σ = 0.988 mho/m; εr = 54.3; ρ = 1000 kg/m ; DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn500; Calibrated: 6/13/2012 - Probe: EX3DV4 - SN3749; ConvF(8.84, 8.84, 8.84); Calibrated: 1/27/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: SN:1017 Rear 20 deg Tilt /Rel.99/Ch4132/Area Scan (11x15x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.02 mW/g Rear 20 deg Tilt /Rel.99/Ch4132/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 33.7 V/m; Power Drift = -0.083 dB Peak SAR (extrapolated) = 1.63 W/kg SAR(1 g) = 0.878 mW/g; SAR(10 g) = 0.460 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.19 mW/g 0 dB = 1.19mW/g

Test Laboratory: UL CCS SAR Lab D Date/Time: 9/24/2012 10:49:43 AM W-CDMA Band V Frequency: 826.4 MHz; Duty Cycle: 1:1 Rear 20 deg Tilt /Rel.99/Ch4132/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.08 mW/g

Test Laboratory: UL CCS SAR Lab D Date/Time: 9/24/2012 W-CDMA Band V Frequency: 836.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.986 mho/m; εr = 54.1; ρ = 1000 kg/m ; DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn500; Calibrated: 6/13/2012 - Probe: EX3DV4 - SN3749; ConvF(8.84, 8.84, 8.84); Calibrated: 1/27/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: SN:1017 Rear 20 deg Tilt /Rel.99/Ch4183/Area Scan (11x15x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.985 mW/g Rear 20 deg Tilt /Rel.99/Ch4183/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 33.2 V/m; Power Drift = -0.055 dB Peak SAR (extrapolated) = 1.57 W/kg SAR(1 g) = 0.851 mW/g; SAR(10 g) = 0.443 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.15 mW/g 0 dB = 1.15mW/g

Test Laboratory: UL CCS SAR Lab D Date/Time: 9/24/2012 W-CDMA Band V Frequency: 846.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 846.6 MHz; σ = 0.997 mho/m; εr = 54.2; ρ = 1000 kg/m ; DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn500; Calibrated: 6/13/2012 - Probe: EX3DV4 - SN3749; ConvF(8.84, 8.84, 8.84); Calibrated: 1/27/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: SN:1017 Rear 20 deg Tilt /Rel.99/Ch4233/Area Scan (11x15x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.982 mW/g Rear 20 deg Tilt /Rel.99/Ch4233/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 32.7 V/m; Power Drift = -0.042 dB Peak SAR (extrapolated) = 1.55 W/kg SAR(1 g) = 0.834 mW/g; SAR(10 g) = 0.436 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.14 mW/g 0 dB = 1.14mW/g

Test Laboratory: UL CCS SAR Lab D Date/Time: 9/25/2012 W-CDMA Band V Frequency: 836.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.991 mho/m; εr = 54.1; ρ = 1000 kg/m ; DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn500; Calibrated: 6/13/2012 - Probe: EX3DV4 - SN3749; ConvF(8.84, 8.84, 8.84); Calibrated: 1/27/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: SN:1017 Edge 1 Touch/Rel.99/Ch4183/Area Scan (7x15x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.652 mW/g Edge 1 Touch/Rel.99/Ch4183/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 26.0 V/m; Power Drift = -0.095 dB Peak SAR (extrapolated) = 0.970 W/kg SAR(1 g) = 0.481 mW/g; SAR(10 g) = 0.232 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.670 mW/g Edge 1 Touch/Rel.99/Ch4183/Zoom Scan 2 (5x5x7)/Cube 1: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 26.0 V/m; Power Drift = -0.095 dB Peak SAR (extrapolated) = 1.01 W/kg SAR(1 g) = 0.481 mW/g; SAR(10 g) = 0.260 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.717 mW/g Cube 1 Cube 0 0 dB = 0.717mW/g

Test Laboratory: UL CCS SAR Lab D Date/Time: 9/25/2012 W-CDMA Band V Frequency: 846.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 846.6 MHz; σ = 0.997 mho/m; εr = 53.9; ρ = 1000 kg/m ; DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn500; Calibrated: 6/13/2012 - Probe: EX3DV4 - SN3749; ConvF(8.84, 8.84, 8.84); Calibrated: 1/27/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: SN:1017 Rear with 14mm Dist./Rel.99/Ch4183/Area Scan (11x15x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.221 mW/g Rear with 14mm Dist./Rel.99/Ch4183/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 15.3 V/m; Power Drift = 0.097 dB Peak SAR (extrapolated) = 0.319 W/kg SAR(1 g) = 0.219 mW/g; SAR(10 g) = 0.141 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.257 mW/g 0 dB = 0.257mW/g

Test Laboratory: UL CCS SAR Lab D Date/Time: 9/25/2012 W-CDMA Band V Frequency: 836.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.991 mho/m; εr = 54.1; ρ = 1000 kg/m ; DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn500; Calibrated: 6/13/2012 - Probe: EX3DV4 - SN3749; ConvF(8.84, 8.84, 8.84); Calibrated: 1/27/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: SN:1017 Edge1 with 14mm Dist./Rel.99/Ch4183/Area Scan (7x23x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.270 mW/g Edge1 with 14mm Dist./Rel.99/Ch4183/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 16.8 V/m; Power Drift = 0.087 dB Peak SAR (extrapolated) = 0.328 W/kg SAR(1 g) = 0.228 mW/g; SAR(10 g) = 0.147 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.274 mW/g Edge1 with 14mm Dist./Rel.99/Ch4183/Zoom Scan 2 (5x5x7)/Cube 1: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 16.8 V/m; Power Drift = 0.087 dB Peak SAR (extrapolated) = 0.196 W/kg SAR(1 g) = 0.147 mW/g; SAR(10 g) = 0.106 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.170 mW/g Cube 1 Cube 0 0 dB = 0.170mW/g


Document Created: 2012-10-18 05:06:37
Document Modified: 2012-10-18 05:06:37
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC