SAR Appendix 16.1

FCC ID: PU5-TP00045A1TS

RF Exposure Info

Download: PDF
FCCID_1869304

Test Laboratory: UL CCS SAR Lab D Date/Time: 9/18/2012 20120918_SystemPerformanceCheck-D1900V2 SN 5d043 Frequency: 1900 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 1900 MHz; σ = 1.5 mho/m; εr = 51.8; ρ = 1000 kg/m ; DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn500; Calibrated: 6/13/2012 - Probe: EX3DV4 - SN3749; ConvF(6.97, 6.97, 6.97); Calibrated: 1/27/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: SN:1017 Body, Pin=100mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 3.88 mW/g Body, Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 58.1 V/m; Power Drift = 0.106 dB Peak SAR (extrapolated) = 7.67 W/kg SAR(1 g) = 4.14 mW/g; SAR(10 g) = 2.15 mW/g Maximum value of SAR (measured) = 5.59 mW/g 0 dB = 5.59mW/g

Test Laboratory: UL CCS SAR Lab D Date/Time: 9/18/2012 20120918_SystemPerformanceCheck-D1900V2 SN 5d043 Frequency: 1900 MHz; Duty Cycle: 1:1 Body, Pin=100mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 4.71 mW/g

Test Laboratory: UL CCS SAR Lab D Date/Time: 9/19/2012 20120919_SystemPerformanceCheck-D1750V2 SN 1050 Frequency: 1750 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 1750 MHz; σ = 1.52 mho/m; εr = 52.9; ρ = 1000 kg/m ; DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn500; Calibrated: 6/13/2012 - Probe: EX3DV4 - SN3749; ConvF(7.23, 7.23, 7.23); Calibrated: 1/27/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: SN:1017 Body, Pin=100mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 3.70 mW/g Body, Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 55.0 V/m; Power Drift = 0.077 dB Peak SAR (extrapolated) = 6.87 W/kg SAR(1 g) = 3.78 mW/g; SAR(10 g) = 2.01 mW/g Maximum value of SAR (measured) = 5.00 mW/g 0 dB = 5.00mW/g

Test Laboratory: UL CCS SAR Lab D Date/Time: 9/19/2012 20120919_SystemPerformanceCheck-D1750V2 SN 1050 Frequency: 1750 MHz; Duty Cycle: 1:1 Body, Pin=100mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 4.10 mW/g

Test Laboratory: UL CCS SAR Lab D Date/Time: 9/20/2012 20120920_SystemPerformanceCheck-D1750V2 SN 1050 Frequency: 1750 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 1750 MHz; σ = 1.52 mho/m; εr = 55.3; ρ = 1000 kg/m ; DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn500; Calibrated: 6/13/2012 - Probe: EX3DV4 - SN3749; ConvF(7.23, 7.23, 7.23); Calibrated: 1/27/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: SN:1017 Body, Pin=100mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 3.80 mW/g Body, Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 56.1 V/m; Power Drift = 0.062 dB Peak SAR (extrapolated) = 6.77 W/kg SAR(1 g) = 3.74 mW/g; SAR(10 g) = 1.98 mW/g Maximum value of SAR (measured) = 4.86 mW/g 0 dB = 4.86mW/g

Test Laboratory: UL CCS SAR Lab D Date/Time: 9/20/2012 20120920_SystemPerformanceCheck-D1750V2 SN 1050 Frequency: 1750 MHz; Duty Cycle: 1:1 Body, Pin=100mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 4.44 mW/g

Test Laboratory: UL CCS SAR Lab D Date/Time: 9/21/2012 20120921_SystemPerformanceCheck-D750V3 SN 1024 Frequency: 750 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 750 MHz; σ = 0.942 mho/m; εr = 54.2; ρ = 1000 kg/m ; DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn500; Calibrated: 6/13/2012 - Probe: EX3DV4 - SN3749; ConvF(8.97, 8.97, 8.97); Calibrated: 1/27/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: SN:1017 Body, Pin=100 mW/Area Scan (7x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.975 mW/g Body, Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 32.9 V/m; Power Drift = 0.136 dB Peak SAR (extrapolated) = 1.25 W/kg SAR(1 g) = 0.859 mW/g; SAR(10 g) = 0.574 mW/g Maximum value of SAR (measured) = 1.04 mW/g 0 dB = 1.04mW/g

Test Laboratory: UL CCS SAR Lab D Date/Time: 9/21/2012 20120921_SystemPerformanceCheck-D750V3 SN 1024 Frequency: 750 MHz; Duty Cycle: 1:1 Body, Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 0.984 mW/g

Test Laboratory: UL CCS SAR Lab D Date/Time: 9/24/2012 20120924 SystemPerformanceCheck-D835V2 SN 4d117 Frequency: 835 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 835 MHz; σ = 0.983 mho/m; εr = 54.1; ρ = 1000 kg/m ; DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn500; Calibrated: 6/13/2012 - Probe: EX3DV4 - SN3749; ConvF(8.84, 8.84, 8.84); Calibrated: 1/27/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: SN:1017 Body, Pin=100 mW/Area Scan (7x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.19 mW/g Body, Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 35.4 V/m; Power Drift = -0.018 dB Peak SAR (extrapolated) = 1.48 W/kg SAR(1 g) = 1 mW/g; SAR(10 g) = 0.659 mW/g Maximum value of SAR (measured) = 1.21 mW/g 0 dB = 1.21mW/g

Test Laboratory: UL CCS SAR Lab D Date/Time: 9/24/2012 20120924 SystemPerformanceCheck-D835V2 SN 4d117 Frequency: 835 MHz; Duty Cycle: 1:1 Body, Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 1.21 mW/g

Test Laboratory: UL CCS SAR Lab D Date/Time: 9/25/2012 20120925_SystemPerformanceCheck-D835V2 SN 4d117 Frequency: 835 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 835 MHz; σ = 0.993 mho/m; εr = 54.1; ρ = 1000 kg/m ; DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE3 Sn500; Calibrated: 6/13/2012 - Probe: EX3DV4 - SN3749; ConvF(8.84, 8.84, 8.84); Calibrated: 1/27/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: SN:1017 Body, Pin=100 mW/Area Scan (7x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.18 mW/g Body, Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 35.0 V/m; Power Drift = 0.047 dB Peak SAR (extrapolated) = 1.49 W/kg SAR(1 g) = 1.01 mW/g; SAR(10 g) = 0.668 mW/g Maximum value of SAR (measured) = 1.23 mW/g 0 dB = 1.23mW/g

Test Laboratory: UL CCS SAR Lab D Date/Time: 9/25/2012 20120925_SystemPerformanceCheck-D835V2 SN 4d117 Frequency: 835 MHz; Duty Cycle: 1:1 Body, Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 1.18 mW/g

Test Laboratory: UL CCS SAR Lab B Date: 10/2/2012 20121002_SystemPerformanceCheck-D5GHzV2 SN 1075 Frequency: 5200 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 25.0C; Liquid Temperature: 24.0C 3 Medium parameters used: f = 5200 MHz; σ = 5.406 mho/m; εr = 47.486; ρ = 1000 kg/m DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1259; Calibrated: 2/13/2012 - Probe: EX3DV4 - SN3686; ConvF(4.04, 4.04, 4.04); Calibrated: 2/16/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (B); Type: QDOVA001BB; Serial: 1118 Body/5.2 GHz, Pin=100mW/Area Scan (7x7x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 10.000 mW/g Body/5.2 GHz, Pin=100mW/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 44.110 V/m; Power Drift = 0.131 dB Peak SAR (extrapolated) = 31.2670 SAR(1 g) = 7.81 mW/g; SAR(10 g) = 2.2 mW/g Maximum value of SAR (measured) = 18.467 mW/g 0 dB = 18.470mW/g = 25.33 dB mW/g

Test Laboratory: UL CCS SAR Lab B Date: 10/2/2012 20121002_SystemPerformanceCheck-D5GHzV2 SN 1075 Frequency: 5200 MHz; Duty Cycle: 1:1 Body/5.2 GHz, Pin=100mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 9.140 mW/g

Test Laboratory: UL CCS SAR Lab B Date: 10/3/2012 20121003_SystemPerformanceCheck-D5GHzV2 SN 1075 Frequency: 5200 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 25.0C; Liquid Temperature: 24.0C 3 Medium parameters used: f = 5200 MHz; σ = 5.228 mho/m; εr = 47.507; ρ = 1000 kg/m DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1259; Calibrated: 2/13/2012 - Probe: EX3DV4 - SN3686; ConvF(4.04, 4.04, 4.04); Calibrated: 2/16/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (B); Type: QDOVA001BB; Serial: 1118 Body/5.2 GHz, Pin=100mW/Area Scan (7x7x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 9.154 mW/g Body/5.2 GHz, Pin=100mW/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 42.825 V/m; Power Drift = 0.19 dB Peak SAR (extrapolated) = 28.6160 SAR(1 g) = 7.18 mW/g; SAR(10 g) = 2.02 mW/g Maximum value of SAR (measured) = 16.935 mW/g 0 dB = 16.930mW/g = 24.57 dB mW/g

Test Laboratory: UL CCS SAR Lab B Date: 10/3/2012 20121003_SystemPerformanceCheck-D5GHzV2 SN 1075 Frequency: 5200 MHz; Duty Cycle: 1:1 Body/5.2 GHz, Pin=100mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 8.316 mW/g

Test Laboratory: UL CCS SAR Lab B Date: 10/5/2012 20121005_SystemPerformanceCheck-D5GHzV2 SN 1075 Frequency: 5200 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 25.0C; Liquid Temperature: 24.0C 3 Medium parameters used: f = 5200 MHz; σ = 5.369 mho/m; εr = 47.886; ρ = 1000 kg/m DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1259; Calibrated: 2/13/2012 - Probe: EX3DV4 - SN3686; ConvF(4.04, 4.04, 4.04); Calibrated: 2/16/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection), Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (B); Type: QDOVA001BB; Serial: 1118 Body/5.2 GHz, Pin=100mW/Area Scan (7x7x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 11.810 mW/g Body/5.2 GHz, Pin=100mW/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 50.298 V/m; Power Drift = 0.18 dB Peak SAR (extrapolated) = 28.6200 SAR(1 g) = 7.62 mW/g; SAR(10 g) = 2.17 mW/g Maximum value of SAR (measured) = 17.322 mW/g 0 dB = 17.320mW/g = 24.77 dB mW/g

Test Laboratory: UL CCS SAR Lab B Date: 10/5/2012 20121005_SystemPerformanceCheck-D5GHzV2 SN 1075 Frequency: 5200 MHz; Duty Cycle: 1:1 Body/5.2 GHz, Pin=100mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 11.750 mW/g

Test Laboratory: UL CCS SAR Lab B Date: 10/8/2012 20121008_SystemPerformanceCheck-D5GHzV2 SN 1075 Frequency: 5200 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 25.0C; Liquid Temperature: 24.0C 3 Medium parameters used: f = 5200 MHz; σ = 5.084 mho/m; εr = 47.678; ρ = 1000 kg/m DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1259; Calibrated: 2/13/2012 - Probe: EX3DV4 - SN3686; ConvF(4.04, 4.04, 4.04); Calibrated: 2/16/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection), Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (B); Type: QDOVA001BB; Serial: 1118 Body/5.2 GHz, Pin=100mW/Area Scan (7x7x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 10.236 mW/g Body/5.2 GHz, Pin=100mW/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 48.410 V/m; Power Drift = 0.19 dB Peak SAR (extrapolated) = 27.7330 SAR(1 g) = 7.26 mW/g; SAR(10 g) = 2.06 mW/g Maximum value of SAR (measured) = 16.940 mW/g 0 dB = 16.940mW/g = 24.58 dB mW/g

Test Laboratory: UL CCS SAR Lab B Date: 10/8/2012 20121008_SystemPerformanceCheck-D5GHzV2 SN 1075 Frequency: 5200 MHz; Duty Cycle: 1:1 Body/5.2 GHz, Pin=100mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 10.117 mW/g

Test Laboratory: UL CCS SAR Lab B Date: 10/9/2012 20121009_SystemPerformanceCheck-D5GHzV2 SN 1075 Frequency: 5500 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 25.0C; Liquid Temperature: 24.0C 3 Medium parameters used: f = 5500 MHz; σ = 5.66 mho/m; εr = 48.383; ρ = 1000 kg/m DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1259; Calibrated: 2/13/2012 - Probe: EX3DV4 - SN3686; ConvF(3.62, 3.62, 3.62); Calibrated: 2/16/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection), Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (B); Type: QDOVA001BB; Serial: 1118 Body/5.5 GHz, Pin=100mW/Area Scan (7x7x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 14.795 mW/g Body/5.5 GHz, Pin=100mW/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 55.520 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 33.0460 SAR(1 g) = 7.99 mW/g; SAR(10 g) = 2.25 mW/g Maximum value of SAR (measured) = 19.112 mW/g 0 dB = 19.110mW/g = 25.63 dB mW/g

Test Laboratory: UL CCS SAR Lab B Date: 10/9/2012 20121009_SystemPerformanceCheck-D5GHzV2 SN 1075 Frequency: 5500 MHz; Duty Cycle: 1:1 Body/5.5 GHz, Pin=100mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 14.514 mW/g

Test Laboratory: UL CCS SAR Lab B Date: 10/10/2012 20121010_SystemPerformanceCheck-D5GHzV2 SN 1075 Frequency: 5500 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 25.0C; Liquid Temperature: 24.0C 3 Medium parameters used: f = 5500 MHz; σ = 5.668 mho/m; εr = 50.439; ρ = 1000 kg/m DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1259; Calibrated: 2/13/2012 - Probe: EX3DV4 - SN3686; ConvF(3.62, 3.62, 3.62); Calibrated: 2/16/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection), Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (B); Type: QDOVA001BB; Serial: 1118 Body/5.5 GHz, Pin=100mW/Area Scan (7x7x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 13.422 mW/g Body/5.5 GHz, Pin=100mW/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 53.062 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 30.0240 SAR(1 g) = 7.26 mW/g; SAR(10 g) = 2.11 mW/g Maximum value of SAR (measured) = 17.380 mW/g 0 dB = 17.380mW/g = 24.80 dB mW/g

Test Laboratory: UL CCS SAR Lab B Date: 10/10/2012 20121010_SystemPerformanceCheck-D5GHzV2 SN 1075 Frequency: 5500 MHz; Duty Cycle: 1:1 Body/5.5 GHz, Pin=100mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 12.904 mW/g

Test Laboratory: UL CCS SAR Lab B Date: 10/11/2012 20121011_SystemPerformanceCheck-D5GHzV2 SN 1075 Frequency: 5800 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 25.0C; Liquid Temperature: 24.0C 3 Medium parameters used: f = 5800 MHz; σ = 6.175 mho/m; εr = 47.544; ρ = 1000 kg/m DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1259; Calibrated: 2/13/2012 - Probe: EX3DV4 - SN3686; ConvF(3.57, 3.57, 3.57); Calibrated: 2/16/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection), Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (B); Type: QDOVA001BB; Serial: 1118 Body/5.8 GHz, Pin=100mW/Area Scan (7x7x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 10.475 mW/g Body/5.8 GHz, Pin=100mW/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 44.967 V/m; Power Drift = 0.15 dB Peak SAR (extrapolated) = 28.9200 SAR(1 g) = 7.12 mW/g; SAR(10 g) = 2.01 mW/g Maximum value of SAR (measured) = 16.786 mW/g 0 dB = 16.790mW/g = 24.50 dB mW/g

Test Laboratory: UL CCS SAR Lab B Date: 10/11/2012 20121011_SystemPerformanceCheck-D5GHzV2 SN 1075 Frequency: 5800 MHz; Duty Cycle: 1:1 Body/5.8 GHz, Pin=100mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 10.433 mW/g

Test Laboratory: UL CCS SAR Lab B Date: 10/12/2012 20121012_SystemPerformanceCheck-D2450V2 SN 748 Frequency: 2450 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 2450 MHz; σ = 1.97 mho/m; εr = 52.164; ρ = 1000 kg/m DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1259; Calibrated: 2/13/2012 - Probe: EX3DV4 - SN3686; ConvF(6.7, 6.7, 6.7); Calibrated: 2/16/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (B); Type: QDOVA001BB; Serial: 1118 Body/Pin=100 mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 5.075 mW/g Body/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 56.024 V/m; Power Drift = 0.16 dB Peak SAR (extrapolated) = 10.4400 SAR(1 g) = 5.16 mW/g; SAR(10 g) = 2.42 mW/g Maximum value of SAR (measured) = 7.245 mW/g 0 dB = 7.240mW/g = 17.19 dB mW/g

Test Laboratory: UL CCS SAR Lab B Date: 10/12/2012 20121012_SystemPerformanceCheck-D2450V2 SN 748 Frequency: 2450 MHz; Duty Cycle: 1:1 Body/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 3.604 mW/g

Test Laboratory: UL CCS SAR Lab B Date: 10/15/2012 20121015_SystemPerformanceCheck-D2450V2 SN 748 Frequency: 2450 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 2450 MHz; σ = 1.967 mho/m; εr = 51.525; ρ = 1000 kg/m DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1259; Calibrated: 2/13/2012 - Probe: EX3DV4 - SN3686; ConvF(6.7, 6.7, 6.7); Calibrated: 2/16/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (B); Type: QDOVA001BB; Serial: 1118 Body/Pin=100 mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 5.804 mW/g Body/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 55.257 V/m; Power Drift = 0.13 dB Peak SAR (extrapolated) = 10.8640 SAR(1 g) = 5.19 mW/g; SAR(10 g) = 2.38 mW/g Maximum value of SAR (measured) = 7.383 mW/g 0 dB = 7.380mW/g = 17.36 dB mW/g

Test Laboratory: UL CCS SAR Lab B Date: 10/15/2012 20121015_SystemPerformanceCheck-D2450V2 SN 748 Frequency: 2450 MHz; Duty Cycle: 1:1 Body/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 3.379 mW/g

Test Laboratory: UL CCS SAR Lab B Date: 10/16/2012 20121016_SystemPerformanceCheck-D2450V2 SN 748 Frequency: 2450 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C 3 Medium parameters used: f = 2450 MHz; σ = 2.002 mho/m; εr = 52.518; ρ = 1000 kg/m DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1259; Calibrated: 2/13/2012 - Probe: EX3DV4 - SN3686; ConvF(6.7, 6.7, 6.7); Calibrated: 2/16/2012 - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (B); Type: QDOVA001BB; Serial: 1118 Body/Pin=100 mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 4.901 mW/g Body/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 56.732 V/m; Power Drift = 0.17 dB Peak SAR (extrapolated) = 10.7460 SAR(1 g) = 5.15 mW/g; SAR(10 g) = 2.37 mW/g Maximum value of SAR (measured) = 7.364 mW/g 0 dB = 7.360mW/g = 17.34 dB mW/g

Test Laboratory: UL CCS SAR Lab B Date: 10/16/2012 20121016_SystemPerformanceCheck-D2450V2 SN 748 Frequency: 2450 MHz; Duty Cycle: 1:1 Body/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 3.547 mW/g


Document Created: 2012-10-18 04:27:03
Document Modified: 2012-10-18 04:27:03
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC