SAR Appendix D4 5d022

FCC ID: PU5-BU7LTN

RF Exposure Info

Download: PDF
FCCID_1165665

Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreementfor the recognition of calibration certificates Client BV—ADT (Auden) Certificate No: D1900V2—50022—Mar09 IVCALIBRATION CERTIFICATE | Object D1900V2 — SN: 5d022 Calibration procedure(s) QA CAL—O5.v7 Calibration procedure for dipole validation kits Calibration date: March 17, 2009 Condition of the calibrated item In Tolerance This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical forcalibration) Primary Standards ID # Cal Date (Calibrated by, Certificate No.) Scheduled Calibration Power meter EPM—442A GB37480704 08—Oct—08 (No. 217—00898) Oct—09 Power sensor HP 8481A US37292783 08—Oct—08 (No. 217—00898) Oct—09 Reference 20 dB Attenuator SN: 5086 (20g) 01—Jul—08 (No. 217—00864) Jul—09 Type—N mismatch combination SN: 5047.2 / 06327 01—Jul—08 (No. 217—00867) Jul—09 Reference Probe ES3DV2 SN: 3025 28—Apr—08 (No. ES3—3025_Apr08) Apr—09 DAE4 SN: 601 07—Mar—09 (No. DAE4—601_Mar09) Mar—10 Secondary Standards ID # Check Date (in house) Scheduled Check Power sensor HP 8481A MY41092317 18—O0ct—02 (in house check Oct—07) In house check: Oct—09 RF generator R&S SMT—06 100005 4—Aug—99 (in house check Oct—07) In house check: Oct—09 Network Analyzer HP 8753E US37390585 $4206 18—O0ct—01 (in house check Oct—08) In house check: Oct—09 Name T Function Signature [lse se Calibrated by: Jeton Kastrati Laboratory Technician Approved by: Katia Pokovic Technical Manager Issued: March 18, 2009 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: D1900V2—50022_Mar09 Page 1 of 9

Calibration Laboratory of 5 Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland S Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x.y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2003, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", December 2003 b) CENELEC EN 50361, "Basic standard for the measurement of Specific Absorption Rate related to human exposure to electromagnetic fields from mobile phones (300 MHz — 3 GHz), July 2001 c) Federal Communications Commission Office of Engineering & Technology (FCC OET), "Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields; Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions", Supplement C (Edition 01—01) to Bulletin 65 Additional Documentation: d) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: e Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. e Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented paralle! to the body axis. e Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. e Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. e SAR measured: SAR measured at the stated antenna input power. e SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. e SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. Certificate No: D1900V2—54022_Mar0g Page 2 of 9

Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASYS V5.0 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom V5.0 Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 1900 MHz + 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 40.0 1.40 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 38.8 + 6 % 1.47 mhoim * 6 % Head TSL temperature during test (21.5 £0.2) °C «n me+ SAR result with Head TSL SAR averaged over 1 cm‘ (1 g) of Head TSL condition SAR measured 250 mW input power 10.2 mW /g SAR normalized normalized to 1W 40.8 mW / g SAR for nominal Head TSL parameters ‘ normalized to 1W 39.4 mW / g £ 17.0 %(k=2) SAR averaged over 10 cm* (10 g) of Head TSL Condition SAR measured 250 mW input power 5.26 mW /g SAR normalized normalized to 1W 21.0 mW /g SAR for nominal Head TSL parameters ‘ normalized to 1W 20.7 mW / g £ 16.5 % (k=2) * Correction to nominal TSL parameters according to d), chapter "SAR Sensitivities" Certificate No: D1900V2—50022_Mar0® Page 3 of 9

Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 53.3 1.52 mho/m Measured Body TSL parameters (22.0 £ 0.2) °C 55.1 + 6 % 1.55 mho/m + 6 % Body TSL temperature during test (21.5 £ 0.2) °C m ——— SAR result with Body TSL SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 250 mW input power 10.2 mW /g SAR normalized normalized to 1W 40.8 mW 1 g SAR for nominal Body TSL parameters * normalized to 1W 40.7 mW / g £ 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 250 mW input power 5.39 mW / g SAR normalized normalized to 1W 21.6 mW / g SAR for nominal Body TSL parameters 2 normalized to 1W 21.5 mW / g £ 16.5 % (k=2) * Correction to nominal TSL parameters according to d), chapter "SAR Sensitivities" Certificate No: D1900V2—50022_Mar09 Page 4 of 9

Appendix Antenna Parameters with Head TSL impedance, transformed to feed point 52.3 Q + 3.1 jQ Return Loss —28.6 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 46.3 Q + 3.5 jQ Return Loss —25.5 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.196 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on August 29, 2002 Certificate No: D1900V2—5d022_Mar09 Page 5 of 9

DASY5 Validation Report for Head TSL Date/Time: 17.03.2009 13:55:13 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 — SN:5d022 Communication System: CW; Frequency: 1900 MHz; Duty Cycle: 1:1 Medium: HSL U1O0 BB Medium parameters used: £= 1900 MHz; o = 1.47 mho/m; s = 38.8; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASYS (IEEE/IEC) DASYS5 Configuration: Probe: ES3DV2 — SN3025; ConvF(4.9, 4.9, 4.9); Calibrated: 28.04.2008 Sensor—Surface: 3.4mm (Mechanical Surface Detection) Electronics: DAE4 Sn601; Calibrated: 07.03.2009 Phantom: Flat Phantom 5.0 (front); Type: QDO0OP50AA; Serial: 100 1 Measurement SW: DASY5, V5.0 Build 120; SEMCAD X Version 13.4 Build 45 Pin = 250 mW; dip = 10 mm, scan at 3.4mm/Zoom Scan (dist=3.4mm, probe Odeg) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 92.8 V/m; Power Drift = 0.049 dB Peak SAR (extrapolated) = 19.3 W/kg SAR(I g) = 10.2 mW/g; SAR(10 g) = 5.26 mW/g Maximum value of SAR (measured) = 12.1 mW/g dB 0 ~3.64 —1.28 —10.9 —14.6 —18.2 0 dB = 12.1ImW/g Certificate No: D1900V2—5d022_Mar09 Page 6 of 9

Impedance Measurement Plot for Head TSL 17 Mar 2009 1i:16:15 [CHI) sii 1 U Fs 2: 52.283 0 3.0527 0 255.71 pH 1 200.000 000 MHz CH1 Markers Del 1: 44.934 a ~16.878 a Cor 1.80000 GHz fvg 16 CH2 CH2 Markers Cor 1:—14.764 dB 1.80000 GHz Av :1.69 START 1 600.000 900 MHz STOP 2 100.000 000 MHz Certificate No: D1900V2—5d022_Mar09 Page 7 of 9

DASY5 Validation Report for Body TSL Date/Time: 10.03.2009 13:13:16 est Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 — SN:50022 Communication System: CW; Frequency: 1900 MHz; Duty Cycle: 1:1 Medium: MSL U10 BB Medium parameters used: £ = 1900 MHz; o = 1.55 mho/m: & = 55.2; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASYS (IEEE/IEC) DASY5 Configuration: Probe: ES3DV2 — SN3025; ConvF(4.5, 4.5, 4.5); Calibrated: 28.04.2008 Sensor—Surface: 3.4mm (Mechanical Surface Detection) Electronics: DAE4 Sn601; Calibrated: 07.03.2009 Phantom: Flat Phantom 5.0 (back); Type: QDOOOP50OAA; Serial: 1002 Measurement SW: DASY5, V5.0 Build 120; SEMCAD X Version 13.4 Build 45 Pin = 250 mW; dip = 10 mm, scan at 3.4mm 2/Zoom Scan (dist=3.4mm, probe Odeg) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 92.1 V/m; Power Drift =—8.7e—005 dB Peak SAR (extrapolated) = 18 W/kg SAR(1 g) = 10.2 mW/g; SAR(10 g) = 5.39 mW/g Maximum value of SAR (measured) = 12.3 mW/g dB 0 dB = 12.3mW/g Certificate No: D1900V2—5d022_Mar09 Page 8 of 9

Impedance Measurement Plot for Body TSL 10 Man 2009 @9:43:10 (CHI) si1 1 U FS 3:46.316 a 3.5469 9 297.11 pH 1 900.000 000 MHz * / CH1 Markers w \ Del £" _ 71"A~ 4t 38.974 a / % \ A ~27.156 a fer 4 Py* ~ 1.75000 GHz 2 41.094 o ~16,.909 a 1 ty 1.80000 GHz \ p#F7"°F~—~ N\ 4 $ Av \ / ,& * 16" i tm k/ 40 ~% if s Y CH2 CH2 Markers 1:—10,032 dB Cor 1.75000 6Hz 2:—13.750 dB 1.80000 GHz Aw 16° START 1 550.000 000 MHz STOP 2 100.000 oo MHz Certificate No: D1900V2—5d022_Mard9 Page 9 of 9


Document Created: 2009-09-07 16:29:09
Document Modified: 2009-09-07 16:29:09
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC