RF Test Report

FCC ID: PRDRX07

Test Report

Download: PDF
FCCID_1885313

FCC ID: PRDRX07 FCC TEST REPORT for Acrox Technologies Co., Ltd. Nano Receiver Model Number: MRN/MRT/MRP FCC ID: PRDRX07 Prepared for : Acrox Technologies Co., Ltd. Address : 4F., No.89, Minshan St., Neihu Dist.,Taipei City 114, , Taiwan, R.O.C Prepared by : Keyway Testing Technology Co., Ltd. Address : Baishun Industrial Zone, Zhangmutou Town, Dongguan, Guangdong, China Tel: 86-769-8718 2258 Fax: 86-769-8718 1058 Report No. : 13KWE01433F Date of Test : Jan.17~18, 2013 Date of Report : Jan.21,2012 Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 1 of 33

FCC ID: PRDRX07 TABLE OF CONTENTS Test Report Declaration Page 1. GENERAL PRODUCT INFORMATION ......................................................................... 4 1.1. Product Function .................................................................................................... 4 1.2. Description of Device (EUT) ................................................................................... 4 1.3. Independent Operation Modes ............................................................................... 4 1.4. Difference between Model Numbers....................................................................... 4 1.5. For test support Unit ............................................................................................... 4 2. TEST SITES .................................................................................................................. 5 2.1. Test Facilities.......................................................................................................... 5 2.2. List of Test and Measurement Instruments............................................................. 6 3. TEST SET-UP AND OPERATION MODES................................................................... 7 3.1. Principle of Configuration Selection ........................................................................ 7 3.2. Block Diagram of Test Set-up................................................................................. 7 3.3. Test Operation Mode and Test Software ................................................................ 7 3.4. Special Accessories and Auxiliary Equipment ........................................................ 7 3.5. Countermeasures to Achieve EMC Compliance..................................................... 7 4. EMISSION TEST RESULTS.......................................................................................... 8 4.1. Conducted Emission at the Mains Terminals Test.................................................. 8 4.2. Radiated Emission Test........................................................................................ 11 5. 20DB OCCUPY BANDWIDTH..................................................................................... 21 5.1. Limits .................................................................................................................... 21 6. BAND EDGE COMPLIANCE TEST ............................................................................. 23 6.1. Limits .................................................................................................................... 23 6.2. Test setup............................................................................................................. 23 7. ANTENNA REQUIREMENT: ....................................................................................... 28 8. PHOTOGRAPHS OF TEST SET-UP........................................................................... 29 8.1. Set-up for Conducted Emission Test .................................................................... 29 8.2. Set-up for Radiated Emission Test ....................................................................... 29 9. PHOTOGRAPHS OF THE EUT................................................................................... 31 Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 2 of 33

FCC ID: PRDRX07 Keyway Testing Technology Co., Ltd. Applicant: Acrox Technologies Co., Ltd. Address: 4F., No.89, Minshan St., Neihu Dist.,Taipei City 114, Taiwan, R.O.C Manufacturer: Acrox Technologies Co., Ltd. Address: 4F., No.89, Minshan St., Neihu Dist.,Taipei City 114, Taiwan, R.O.C Acrox Technologies Co., Ltd. Factor: Hsinmin Industria,Changan Town,Dongguan City, Address: Guangdong,China E.U.T: Nano Receiver Model Number: MRN/MRT/MRP Trade Name: ACROX/ONN Serial No.: ------ Date of Receipt: Jan.15, 2013 Date of Test: Jan.17~18, 2013 Test Specification: FCC Part 15, Subpart C: Oct. 1, 2010 ANSI C63.4:2009 Test Result: The equipment under test was found to be compliance with the requirements of the standards applied. Issue Date: Jan.21, 2013 Tested by: Reviewed by: Approved by: Andy Gao / Engineer Jade Yang/ Supervisor Chris Du / Manager Other Aspects: None. Abbreviations: OK/P=passed fail/F=failed n.a/N=not applicable E.U.T=equipment under tested This test report is based on a single evaluation of one sample of above mentioned products. It is not permitted to be duplicated in extracts without written approval of Keyway Testing Technology Co., Ltd. Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 3 of 33

FCC ID: PRDRX07 1. GENERAL PRODUCT INFORMATION 1.1. Product Function Refer to Technical Construction Form and User Manual. 1.2. Description of Device (EUT) Description : Nano Receiver M/N : MRN/MRT/MRP Power Supply : DC 5V from PC input AC 120V/60Hz Operation Frequency : 2408~2474MHz Modulation Technology : GFSK Antenna Type : Integrated PCB antenna Antenna Gain : 0.5dBi 1.3. Independent Operation Modes The basic operation modes are: 1.3.1. EUT work continues TX mode and frequency as below: Channel : Frequency Low : 2408MHz Middle : 2440MHz High : 2474MHz 1.4. Difference between Model Numbers Note: The products are all the same except the model number. 1.5. For test support Unit Notebook: Manufacturer: Lenovo M/N: Lenovo G475 S/N: GB14477457 Adapter: Manufacturer: Lenovo M/N: LN-A0403A3C S/N: 36001672 Input: 100-240V/2.5A,50-60Hz Output: 20V/2A Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 4 of 33

FCC ID: PRDRX07 2. TEST SITES 2.1. Test Facilities Lab Qualifications : 944 Shielded Room built by ETS-Lindgren, USA Date of completion: March 28, 2011 966 Chamber built by ETS-Lindgren, USA Date of completion: March 28, 2011 Certificated by TUV Rheinland, Germany. Registration No.: UA 50207153 Date of registration: July 13, 2011 Certificated by UL, USA Registration No.: 100567-237 Date of registration: September 1, 2011 Certificated by Intertek Registration No.: 2011-RTL-L1-31 Date of registration: October 11, 2011 Certificated by Industry Canada Registration No.: 9868A Date of registration: December 8, 2011 Certificated by FCC, USA Registration No.: 370994 Date of registration: February 21, 2012 Certificated by CNAS China Registration No.: CNAS L5783 Date of registration: August 8, 2012 Name of Firm : Keyway Testing Technology Co., Ltd. Site Location : Baishun Industrial Zone, Zhangmutou Town, Dongguan, Guangdong, China Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 5 of 33

FCC ID: PRDRX07 2.2. List of Test and Measurement Instruments 2.2.1. For Connected emission test (Below 1GHz) Equipment Manufacturer Model No. Serial No. Last Cal. Next Cal. EMI Test Receiver Rohde&Schwarz ESCI 101156 Jul. 7,12 Jul. 7,13 Artificial Mains Network Rohde&Schwarz ENV216 101315 Jul. 2,12 Jul. 2,13 Artificial Mains Network Rohde&Schwarz ENV216 101314 Jul. 2,12 Jul. 2,13 (AUX) RF Cable FUJIKURA 3D-2W 944 Cable Jul. 2,12 Jul. 2,13 2.2.2. For radiated emission test (Below 1GHz) Equipment Manufacturer Model No. Serial No. Last Cal. Next Cal. EMI Test Receiver Rohde&Schwarz ESCI 101156 Jul. 7,12 Jul. 7,13 Bilog Antenna ETS-LINDGREEN 3142D 135452 Jun. 28,12 Jun. 28,13 Spectrum Analyzer Agilent E4411B MY4511304 Jul. 11,12 Jul. 11,13 3m Semi-anechoic ETS-LINDGREEN 966 KW01 Aug.29,12 Aug.29,13 Chamber Signal Amplifier SONOMA 310 187016 Jul. 7,12 Jul. 7,13 Signal Amplifier Agilent 8449B 3008A00251 Jul. 7,12 Jul. 7,13 RF Cable IMRO IMRO-400 966 Cable 1# Jul. 7,12 Jul. 7,13 MULTI-DEVICE ETS-LINDGREEN 2090 126913 N/A N/A Controller 2.2.3. For above 1GHz radiated emission, band edge, 20dB bandwidth test Equipment Manufacturer Model No. Serial No. Last Cal. Next Cal. Horn Antenna DAZE ZN30701 11003 Jul. 11,12 Jul. 11,13 Horn Antenna SCHWARZBECK BBHA9170 9170-068 Jul. 11,12 Jul. 11,13 Spectrum Analyzer Agilent 8593E 3911A04271 Jul. 7,12 Jul. 7,13 3m Semi-anechoic ETS-LINDGREN 966 KW01 Jul. 7,12 Jul. 7,13 Chamber Signal Amplifier DAZE ZN3380C 11001 Jul. 7,12 Jul. 7,13 Signal Amplifier Agilent 8449B 3008A00251 Jul. 7,12 Jul. 7,13 RF Cable IMRO IMRO-400 966 Cable 1# Jul. 7,12 Jul. 7,13 MULTI-DEVICE ETS-LINDGREN 2090 126913 N/A N/A Controller Antenna Holder ETS-LINDGREN 2070B 00109601 N/A N/A Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 6 of 33

FCC ID: PRDRX07 3. TEST SET-UP AND OPERATION MODES 3.1. Principle of Configuration Selection Emission: The equipment under test (EUT) was configured to measure its highest possible radiation level. The test modes were adapted accordingly in reference to the Operating Instructions. 3.2. Block Diagram of Test Set-up System Diagram of Connections between EUT and Simulators Y Z Notebook AC Mains EUT X Axis (EUT: Nano Receiver ) Note: By preliminary testing and verifying three axis (X, Y and Z) position of EUT transmitted status, it was found that “Y axis” position was the worst, then the final test was executed the worst condition and test data were recorded in this report. Test data as below. Frequency Field Strength Antenna Axis (MHz) (dBuV/m) Polarization 2408 X 83.68 Horizontal 2408 Y 84.41 Horizontal 2408 Z 82.19 Horizontal 3.3. Test Operation Mode and Test Software None. 3.4. Special Accessories and Auxiliary Equipment None. 3.5. Countermeasures to Achieve EMC Compliance None. Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 7 of 33

FCC ID: PRDRX07 4. EMISSION TEST RESULTS 4.1. Conducted Emission at the Mains Terminals Test 4.1.1. Limit 15.209 limits 4.1.2. Test setup The EUT was put on a wooden table which was 0.8 m high above the ground and connected to the AC mains through the Artificial Mains Network (AMN). Where the mains cable supplied by the manufacture was longer than 0.8 m, the excess was folded back and forth parallel to the cable at the centre so as to form a bundle no longer than 0.4 m. The EUT was kept 0.4 m from any other earthed conducting surface. Both sides of AC line were checked to find out the maximum conducted emission levels according to the test procedure during the conducted emission test. The frequency range from 150 kHz to 30 MHz was investigated. The bandwidth of the test receiver was set at 9 kHz. The test data of the worst case condition(s) was reported on the following page. All the scanning waveforms were attached within Appendix I. Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 8 of 33

FCC ID: PRDRX07 Test Data TX Mode Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 9 of 33

FCC ID: PRDRX07 TX Mode Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 10 of 33

FCC ID: PRDRX07 4.2. Radiated Emission Test 4.2.1. Limit 15.209 limits 4.2.2. Fundamental and harmonics emission limits Fundamental Field Strength of Fundamental Field Strength of Harmonics Frequency mV/m dBuV/m uV/m dBuV/m 902~928 MHz 50 94 500 54 2400~2483.5 MHz 50 94 500 54 5725~5875MHz 50 94 500 54 24.0~24.25GHz 250 108 2500 68 4.2.3. Restricted bands of operation All the emissions appearing within 15.205 restricted frequency bands shall not exceed the limits shown in 15.209, all the other emissions shall be at least 20dB below the fundamental emissions, or comply with 15.209 limits. Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 11 of 33

FCC ID: PRDRX07 4.2.4. Test setup The EUT was placed on a turn table which was 0.8 m above the ground. The turn table can rotate 360 degrees to determine the position of the maximum emission level. The EUT was set 3 m away from the receiving antenna which was mounted on an antenna tower. The measuring antenna moved up and down to find out the maximum emission level. It moved from 1 m to 4 m for both horizontal and vertical polarizations. The EUT was tested in the Chamber Site. It was pre-scanned with a Peak detector from the spectrum, and all the final readings from the test receiver were measured with the Quasi-Peak detector. The bandwidth of the EMI test receiver is set at 120kHz for frequency range from 30MHz to 1000 MHz. The bandwidth of the Spectrum’s VBW is set at 3MHz and RBW is set at 1MHz for peak emissions measurement above 1GHz and 1MHz RBW, 10Hz VBW for average emissions measure above 1GHz. The frequency range from 30MHz to 10th harmonic (25GHz) are checked. and no any emissions were found from 18GHz to 25 GHz, So the radiated emissions from 18GHz to 25GHz were not record. The test data of the worst case condition(s) was reported on the following pages. Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 12 of 33

FCC ID: PRDRX07 Test Data Notes: 1. Emission Level = Antenna Factor + Cable Loss + Meter Reading-Preamp Factor. 2. Measurement Uncertainty: ±3.2 dB at a level of confidence of 95%. Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 13 of 33

FCC ID: PRDRX07 Notes: 1. Emission Level = Antenna Factor + Cable Loss + Meter Reading-Preamp Factor. 2. Measurement Uncertainty: ±3.2 dB at a level of confidence of 95%. Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 14 of 33

FCC ID: PRDRX07 Notes: 1. Emission Level = Antenna Factor + Cable Loss + Meter Reading-Preamp Factor. 2. Measurement Uncertainty: ±3.2 dB at a level of confidence of 95%. Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 15 of 33

FCC ID: PRDRX07 Notes: 1. Emission Level = Antenna Factor + Cable Loss + Meter Reading-Preamp Factor. 2. Measurement Uncertainty: ±3.2 dB at a level of confidence of 95%. Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 16 of 33

Reyway Testing Technology Co «,Ltd. \C) Keay Testing KES-?“‘) Baishun Industrial Zone, Zhanqguuton Ton,Dongquen, Guangdong, China Tel: 0769—87182258 Fax: 076%—87181058 Mail: kntest@reywaytest. com Data: 86 File: D:‘966 data\report!RF.EMG (103) 120Level (dBuVim) Date: 2013—01—17 90.0 FCC PART15 2.4G PK 60.0 FCC PARTJ3 2.4G AV & 4 1 30.0 l]1l]l]l] 4000. 6000. 8000. 10000. 12000. 14000. 16000. 18000 Frequency (MHz) Site 966 Chamber Condition: FCC PARTIS 2.4G PK 3m 2M30701 VERTICAL EUT Nano Receiver m/M nay Power DC SV from PC input AC 120¥/60Hz Test By Andy Comment Temp:24.8!C Humi:S6% Press:101.52kPa Test Mode: TX Mode 2440MHz Presmp Read CobleAntenna Limit Over Freq Factor Level Loss Factor Level Line Limit Remark MHz dB dBu¥y dB dB/m dBu¥/m dBu¥V/m dB 1 1272.00 26.05 40.46 5.14 24.76 44.31 54.00 —9.69 Average 2 1272.00 26.05 45.13 5.14 24.76 48.98 74.00 —25.02 Peak 3 2440.00 26.383 é4.14 7.48 28.76 74.05 94.00 —19.95 Average 4 2440.00 26.33 73.63 7.48 20.76 ©3.54 114.00 —30.46 Peak 5 4621.00 27.38 20.67 11.56 32.49 46.34° 54.00 —7.66 Average & a621.00 27.38 s2.92 11.56 32.49 49.59 74.00 —24.41 Pesk 7 7256.00 27.95 17.40 i6.61 37.30 43.36 54.00 —10.64 Average 8 7256.00 27.9§ 21.74 16.61 37.30 47.70 74.00 —26.30 Peak 90— 10384.00 28.84 18.08 17.04 39.01. 45.29 54.00 —8.71 Average 10 10304.00 28.04 22.46 17.04 39.01 49.07 74.00 —24.33 Peak 11 15824.00 29.67 16.62 20.§2 39.64 47.11 54.00 —6.89 Average i2 is@24.00 @9.67 19.s1 20.52 39.64 s0.00 74.00 —24.00 Peak vaimp t uis . ® nermay neymay remuny revmungy uuy cas reput nromver raye 11 u.00

FCC ID: PRDRX07 Notes: 1. Emission Level = Antenna Factor + Cable Loss + Meter Reading-Preamp Factor. 2. Measurement Uncertainty: ±3.2 dB at a level of confidence of 95%. Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 18 of 33

FCC ID: PRDRX07 Notes: 1. Emission Level = Antenna Factor + Cable Loss + Meter Reading-Preamp Factor. 2. Measurement Uncertainty: ±3.2dB at a level of confidence of 95%. Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 19 of 33

FCC ID: PRDRX07 Notes: 1. Emission Level = Antenna Factor + Cable Loss + Meter Reading-Preamp Factor. 2. Measurement Uncertainty: ±3.24 dB at a level of confidence of 95%. Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 20 of 33

FCC ID: PRDRX07 5. 20DB OCCUPY BANDWIDTH 5.1. Limits Intentional radiators operating under the alternative provisions to the general emission limits, as contained in §§ 15.217 through 15.257 and in Subpart E of this part, must be designed to ensure that the 20 dB bandwidth of the emission, or whatever bandwidth may otherwise be specified in the specific rule section under which the equipment operates, is contained within the frequency band designated in the rule section under which the equipment is operated. Test data: Channel Frequency 20dB Bandwidth Limit (MHz) (MHz) (kHz) 2408 0.400 N/A 2440 0.444 N/A 2474 0.432 N/A Test plot as follows: Test Frequency: 2408MHz Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 21 of 33

FCC ID: PRDRX07 Test Frequency: 2440MHz Test Frequency: 2474MHz Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 22 of 33

FCC ID: PRDRX07 6. BAND EDGE COMPLIANCE TEST 6.1. Limits All the lower and upper band-edges emissions appearing within 2310MHz to 2390MHz and 2483.5MHz to 2500MHz restricted frequency bands shall not exceed the limits shown in 15.209, all the other emissions outside operation frequency band 2400MHz to 2483.5MHz shall be at least 20dB below the fundamental emissions, or comply with 15.209 limits. 6.2. Test setup The EUT was placed on a turn table which was 0.8 m above the ground. The turn table can rotate 360 degrees to determine the position of the maximum emission level. The EUT was set 3 m away from the receiving antenna which was mounted on an antenna tower. The measuring antenna moved up and down to find out the maximum emission level. It moved from 1 m to 4 m for both horizontal and vertical polarizations. The bandwidth of the Spectrum’s VBW is set at 3MHz and RBW is set at 1MHz for peak emissions measurement above 1GHz and 1MHz RBW, 10Hz VBW for average emissions measure. Note: If the PK measured levels comply with average limit, then the average level were deemed to comply with average limit. Test plot as follows: Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 23 of 33

FCC ID: PRDRX07 Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 24 of 33

FCC ID: PRDRX07 Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 25 of 33

FCC ID: PRDRX07 Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 26 of 33

Keyway Testing Technology Co.,Ltd C xaroay Tet=s y Keyway Baishun Industrial Zone,Zbengmutou Town, Dongquan, Cuengdong, China Tel: ores—s7ie2250 Fax: O769—a7181058 Mail: kutest@keywaytest. com Data: 89 File: :966 data\report!RF.EM6 (103) 12l]Lemal (dBuVim) Date: 2013—01—17 90.0 FCC PART1S 21G PK 60.0 FCC PART1S 2.—4G AV 30.0 2469 2480. 2490. 2500. 2510, 2520 Frequency (MHz) Site : 966 Chamber Condition: FCC PARTIS 2.4G PK 3m ZN30701 HORIZONTAL EUT : Nano Receiver M/N io HRN Pover : DC 5¥ from PC input AC 120%/ 60Nz Test By Andy Comment : Tempi24.0‘C Humi:56% Press:101.52kPa Test Mode: TX Hode 2474MHz Preamp Read CableAntenna Limit Over Freq Factor Level Loss Factor Level Line Limit Remark IHe: dB dBuw aB dB/m dBu¥/m dBu¥/m dB 1 2474.10 26.34 75.92 7.52 28.79 85.899 114.00 —28.11 Peak 2 2480.10 26.34 39.35 7.57 28.79 49.37 §54.00 —4.63 Average 3 2490.10 26.94 §1.13 7.57 20.79 e1.15 74.00 —12.95 Peak 4 2483.50 26.34 34.16 7.57 28.79 44.18 74.00 —20.82 Peak 5 2500.32 26.35 38.21 7.61 28.80 48.27 74.00 —25.73 Peak Kevuoy

FCC ID: PRDRX07 7. ANTENNA REQUIREMENT: Standard requirement: FCC Part15 C Section 15.203 /247(c) 15.203 requirement: An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. 15.247(c) (1)(i) requirement: (i) Systems operating in the 2400-2483.5 MHz band that is used exclusively for fixed. Point-to-point operations may employ transmitting antennas with directional gain greater than 6dBi provided the maximum conducted output power of the intentional radiator is reduced by 1 dB for every 3 dB that the directional gain of the antenna exceeds 6dBi. E.U.T Antenna: The antenna is Integral antenna, the best case gain of the antenna is 0.5dBi Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 28 of 33

FCC ID: PRDRX07 8. PHOTOGRAPHS OF TEST SET-UP 8.1. Set-up for Conducted Emission Test 8.2. Set-up for Radiated Emission Test Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 29 of 33

FCC ID: PRDRX07 Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 30 of 33

FCC ID: PRDRX07 9. PHOTOGRAPHS OF THE EUT Figure 1 General Appearance of the EUT Figure 2 General Appearance of the EUT Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 31 of 33

FCC ID: PRDRX07 Figure 3 General Appearance of the PCB Figure 4 General Appearance of the PCB Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 32 of 33

FCC ID: PRDRX07 Figure 5 General Appearance of the PCB END. Keyway Testing Technology Co., Ltd. Report No. 13KWE04333F Page 33 of 33


Document Created: 2013-01-23 16:30:41
Document Modified: 2013-01-23 16:30:41
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC