Test Report

FCC ID: PRDRX02

Test Report

Download: PDF
FCCID_1449041

                             FCC TEST REPORT

                          REPORT NO. : RF110318C06
                           MODEL NO. : MRN
                               FCC ID: PRDRX02
                           RECEIVED : Mar. 18, 2011
                             TESTED : Mar. 22 ~ Mar. 24, 2011
                              ISSUED : Mar. 30, 2011



                APPLICANT : Acrox Technologies Co., Ltd

                  ADDRESS : 4F., No. 89, Minshan St., Neihu Dist., Taipei City
                            114, Taiwan, R.O.C.



                 ISSUED BY : Bureau Veritas Consumer Products Services
                             (H.K.) Ltd., Taoyuan Branch

           LAB ADDRESS : No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou
                         Hsiang, Taipei Hsien 244, Taiwan, R.O.C.

         TEST LOCATION : No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei
                         Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C.


This test report consists of 33 pages in total. It may be duplicated completely for legal use with the
approval of the applicant. It should not be reproduced except in full, without the written approval of
our laboratory. The client should not use it to claim product, certification, approval or endorsement by
TAF or any government agency. The test results in the report only apply to the tested sample. The
test results in this report are traceable to the national or international standards.




Report No.: RF110318C06                            1                             Report Format Version 4.0.0


                                          Table of Contents
RELEASE CONTROL RECORD .............................................................................................4
1.       CERTIFICATION .........................................................................................................5
2.       SUMMARY OF TEST RESULTS .................................................................................6
2.1      MEASUREMENT UNCERTAINTY ...............................................................................6
3.       GENERAL INFORMATION ..........................................................................................7
3.1      GENERAL DESCRIPTION OF EUT ............................................................................7
3.2      DESCRIPTION OF TEST MODES ..............................................................................8
3.2.1    CONFIGURATION OF SYSTEM UNDER TEST ..........................................................9
3.2.2    TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .............................10
3.3      GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................12
3.4      DESCRIPTION OF SUPPORT UNITS.......................................................................12
4.       TEST TYPES AND RESULTS ...................................................................................13
4.1      RADIATED EMISSION MEASUREMENT ..................................................................13
4.1.1    LIMITS OF RADIATED EMISSION MEASUREMENT................................................13
4.1.2    TEST INSTRUMENTS...............................................................................................14
4.1.3    TEST PROCEDURES ...............................................................................................15
4.1.4    DEVIATION FROM TEST STANDARD ......................................................................15
4.1.5    TEST SETUP ............................................................................................................16
4.1.6    EUT OPERATING CONDITIONS ..............................................................................16
4.1.7    TEST RESULTS ........................................................................................................17
4.2      CONDUCTED EMISSION MEASUREMENT .............................................................23
4.2.1    LIMITS OF CONDUCTED EMISSION MEASUREMENT...........................................23
4.2.2    TEST INSTRUMENTS...............................................................................................23
4.2.3    TEST PROCEDURES ...............................................................................................24
4.2.4    DEVIATION FROM TEST STANDARD ......................................................................24
4.2.5    TEST SETUP ............................................................................................................25
4.2.6    EUT OPERATING CONDITIONS ..............................................................................25
4.2.7    TEST RESULTS ........................................................................................................26
4.3      BAND EDGES MEASUREMENT...............................................................................28
4.3.1    LIMITS OF BAND EDGES MEASUREMENT ............................................................28
4.3.2    TEST INSTRUMENTS...............................................................................................28
4.3.3    TEST PROCEDURE..................................................................................................28
4.3.4    DEVIATION FROM TEST STANDARD ......................................................................28
4.3.5    EUT OPERATING CONDITION.................................................................................28


Report No.: RF110318C06                                        2                                    Report Format Version 4.0.0


4.3.6   TEST RESULTS ........................................................................................................29
5.      PHOTOGRAPHS OF THE TEST CONFIGURATION.................................................31
6.      INFORMATION ON THE TESTING LABORATORIES ...............................................32
7.      APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO
         THE EUT BY THE LAB.............................................................................................33




Report No.: RF110318C06                                      3                                   Report Format Version 4.0.0


                                RELEASE CONTROL RECORD

 ISSUE NO.                REASON FOR CHANGE                   DATE ISSUED
 Original release         N/A                                 Mar. 30, 2011




Report No.: RF110318C06                       4          Report Format Version 4.0.0


1. CERTIFICATION

                PRODUCT: 2.4GHz Receiver
              MODEL NO.: MRN
                    BRAND: HP
              APPLICANT: Acrox Technologies Co., Ltd
                   TESTED: Mar. 22 ~ Mar. 24, 2011
          TEST SAMPLE: ENGINEERING SAMPLE
            STANDARDS: FCC Part 15, Subpart C (Section 15.249)
                            ANSI C63.4-2003
                            ANSI C63.10-2009



The above equipment (Model: MRN) have been tested by Bureau Veritas
Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance
with the requirement of the above standards. The test record, data evaluation &
Equipment Under Test (EUT) configurations represented herein are true and accurate
accounts of the measurements of the sample’s EMC characteristics under the
conditions specified in this report.




     PREPARED BY :                                         , DATE :   Mar. 30, 2011
                              Suntee Liu / Specialist


    APPROVED BY :                                          , DATE :   Mar. 30, 2011
                          Gary Chang / Assistant Manager




Report No.: RF110318C06                         5                     Report Format Version 4.0.0


2. SUMMARY OF TEST RESULTS
The EUT has been tested according to the following specifications:

             APPLIED STANDARD: FCC Part 15, Subpart C (Section 15.249)

 STANDARD
                              TEST TYPE                    RESULT             REMARK
PARAGRAPH
                                                                    Meet the requirement of limit.
15.207           Conducted Emission Test                    PASS    Minimum passing margin is
                                                                    -12.11dB at 0.177MHz.
                 Radiated Emission Test
15.209           Band Edge Measurement                              Meet the requirement of limit.
15.249           Limit: 50dB less than the peak value of    PASS    Minimum passing margin is
15.249 (d)       fundamental frequency or meet radiated             -14.8dB at 265.16MHz.
                 emission limit in section 15.209



2.1 MEASUREMENT UNCERTAINTY

Where relevant, the following measurement uncertainty levels have been estimated
for tests performed on the EUT as specified in CISPR 16-4-2:

       MEASUREMENT                          FREQUENCY                      UNCERTAINTY
     Conducted emissions                   150kHz~30MHz                         2.44dB
                                           30MHz ~ 200MHz                       2.93dB
                                         200MHz ~1000MHz                        2.95dB
      Radiated emissions
                                            1GHz ~ 18GHz                        2.26dB
                                           18GHz ~ 40GHz                        1.94dB


This uncertainty represents an expanded uncertainty expressed at approximately the
95% confidence level using a coverage factor of k=2.




Report No.: RF110318C06                           6                           Report Format Version 4.0.0


3. GENERAL INFORMATION
 3.1    GENERAL DESCRIPTION OF EUT


EUT                              2.4GHz Receiver
MODEL NO.                        MRN
FCC ID                           PRDRX02
POWER SUPPLY                     5Vdc (host equipment)
MODULATION TYPE                  GFSK
DATA RATE                        1M bit/sec.
OPERATING FREQUENCY              2403MH~2480MHz
NUMBER OF CHANNEL                78
ANTENNA TYPE                     Printed antenna
DATA CABLE                       NA
I/O PORT                         USB
ACCESSORY DEVICES                NA
NOTE:
1. The EUT has transmitter and receiver functions.
2. The above EUT information is declared by manufacturer and for more detailed features description,
   please refer to the manufacturer's specifications or User's Manual.




Report No.: RF110318C06                          7                           Report Format Version 4.0.0


 3.2    DESCRIPTION OF TEST MODES
 78 channels are provided to this EUT.
   Channel         Freq. (MHz)   Channel   Freq. (MHz)   Channel        Freq. (MHz)
      1               2403         27         2429         53              2455
      2               2404         28         2430         54              2456
      3               2405         29         2431         55              2457
      4               2406         30         2432         56              2458
      5               2407         31         2433         57              2459
      6               2408         32         2434         58              2460
      7               2409         33         2435         59              2461
      8               2410         34         2436         60              2462
      9               2411         35         2437         61              2463
     10               2412         36         2438         62              2464
     11               2413         37         2439         63              2465
     12               2414         38         2440         64              2466
     13               2415         39         2441         65              2467
     14               2416         40         2442         66              2468
     15               2417         41         2443         67              2469
     16               2418         42         2444         68              2470
     17               2419         43         2445         69              2471
     18               2420         44         2446         70              2472
     19               2421         45         2447         71              2473
     20               2422         46         2448         72              2474
     21               2423         47         2449         73              2475
     22               2424         48         2450         74              2476
     23               2425         49         2451         75              2477
     24               2426         50         2452         76              2478
     25               2427         51         2453         77              2479
     26               2428         52         2454         78              2480




Report No.: RF110318C06                    8                       Report Format Version 4.0.0


3.2.1 CONFIGURATION OF SYSTEM UNDER TEST




                            Notebook   EUT (Power from host equipment)




             *Test Table




Report No.: RF110318C06        9                           Report Format Version 4.0.0


3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL

           EUT
                                    APPLICABLE TO
       CONFIGURE                                                                DESCRIPTION
          MODE           RE≥1G     RE<1G       PLC          BM

             -               √        √         √            √                        -

      Where PLC: Power Line Conducted Emission                   RE<1G: Radiated Emission below 1GHz
                 RE≥1G: Radiated Emission above 1GHz             BM: Bandedge Measurement


RADIATED EMISSION TEST (ABOVE 1 GHz):

     Pre-Scan has been conducted to determine the worst-case mode from all possible combinations
      between available modulations axis and antenna ports (if EUT with antenna diversity
      architecture).
      Following channel(s) was (were) selected for the final test as listed below.
         AVAILABLE CHANNEL                 TESTED CHANNEL                   MODULATION TYPE

                   1 to 78                      1, 38, 78                         GFSK



RADIATED EMISSION TEST (BELOW 1 GHz):

     Pre-Scan has been conducted to determine the worst-case mode from all possible combinations
      between available modulations axis and antenna ports (if EUT with antenna diversity
      architecture).
      Following channel(s) was (were) selected for the final test as listed below.
         AVAILABLE CHANNEL                 TESTED CHANNEL                   MODULATION TYPE

                   1 to 78                           78                           GFSK



POWER LINE CONDUCTED EMISSION TEST:
     Pre-Scan has been conducted to determine the worst-case mode from all possible combinations
      between available modulations, data rates and antenna ports (if EUT with antenna diversity
      architecture).
      Following channel(s) was (were) selected for the final test as listed below.
         AVAILABLE CHANNEL                 TESTED CHANNEL                   MODULATION TYPE

                   1 to 78                           78                           GFSK



BANDEDGE MEASUREMENT:

     Pre-Scan has been conducted to determine the worst-case mode from all possible combinations
      between available modulations and antenna ports (if EUT with antenna diversity architecture).
      Following channel(s) was (were) selected for the final test as listed below.
         AVAILABLE CHANNEL                 TESTED CHANNEL                   MODULATION TYPE

                   1 to 78                          1, 78                         GFSK




Report No.: RF110318C06                                     10                            Report Format Version 4.0.0


TEST CONDITION:

                                                           INPUT POWER
       APPLICABLE TO      ENVIRONMENTAL CONDITIONS                         TESTED BY
                                                            (SYSTEM)
            RE≥1G           25deg. C, 65%RH, 992hPa        120Vac, 60Hz    David Huang

            RE<1G           25deg. C, 65%RH, 992hPa        120Vac, 60Hz    David Huang

             PLC            25deg. C, 67%RH, 992hPa        120Vac, 60Hz      Sun Lin

             BM             25deg. C, 65%RH, 992hPa        120Vac, 60Hz    David Huang




Report No.: RF110318C06                               11                  Report Format Version 4.0.0


 3.3    GENERAL DESCRIPTION OF APPLIED STANDARDS

The EUT is a RF Product. According to the specifications of the manufacturer, it
must comply with the requirements of the following standards:

FCC Part 15, Subpart C (Section 15.249)
ANSI C63.4-2003
ANSI C63.10-2009

All test items have been performed and recorded as per the above standards.

NOTE: The EUT is also considered as a kind of computer peripheral, because the connection to
      computer is necessary for typical use. It has been verified to comply with the requirements of
      FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately.



 3.4    DESCRIPTION OF SUPPORT UNITS

The EUT has been tested as an independent unit together with other necessary
accessories or support units. The following support units or accessories were used to
form a representative test configuration during the tests.

NO.         PRODUCT          BRAND       MODEL NO.           SERIAL NO.                FCC ID
  1         NOTEBOOK           Dell          D830           10026042688           E2K4965AGNM

NO.                 SIGNAL CABLE DESCRIPTION OF THE ABOVE SUPPORT UNITS
  1    NA
NOTE: All power cords of the above support units are non-shielded (1.8m).




Report No.: RF110318C06                           12                           Report Format Version 4.0.0


4.     TEST TYPES AND RESULTS

 4.1    RADIATED EMISSION MEASUREMENT

4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT

Emissions radiated outside of the specified bands, shall be according to the general
radiated limits in 15.209, 15.249 as following:

15.209 Limit

         Frequencies                   Field strength              Measurement distance
            (MHz)                    (microvolts/meter)                  (meters)

         0.009 ~ 0.490                   2400/F(kHz)                          300
         0.490 ~ 1.705                  24000/F(kHz)                          30
          1.705 ~ 30.0                        30                              30
             30 ~ 88                          100                              3
            88 ~ 216                          150                              3
           216 ~ 960                          200                              3
           Above 960                          500                              3
15.249 Limit
                                      Field Strength of               Field Strength of
         Fundamental
                                        Fundamental                      Harmonics
          Frequency
                                      (millivolts/meter)             (microvolts/meter)
        902 ~ 928 MHz                         50                              500
       2400 ~ 2483.5 MHz                      50                              500
       5725 ~ 5875 MHz                        50                              500
        24 ~ 24.25 GHz                        250                            2500
NOTE:
1. The lower limit shall apply at the transition frequencies.
2. Emission level (dBuV/m) = 20 log Emission level (uV/m).
3. As shown in 15.35(b), for frequencies above 1000MHz, the field strength limits are based on
   average detector, however, the peak field strength of any emission shall not exceed the maximum
   permitted average limits, specified above by more than 20dB under any condition of modulation.




Report No.: RF110318C06                         13                          Report Format Version 4.0.0


4.1.2 TEST INSTRUMENTS

      DESCRIPTION &                                                     DATE OF   DUE DATE OF
                                  MODEL NO.             SERIAL NO.
      MANUFACTURER                                                    CALIBRATION CALIBRATION
  Test Receiver
                                      ESI7               838496/016    Dec. 27, 2010 Dec. 26, 2011
  ROHDE & SCHWARZ
  Spectrum Analyzer
                                     FSU43                100115       Aug. 02, 2010 Aug. 01, 2011
  ROHDE & SCHWARZ
  BILOG Antenna
                                   VULB9168               9168-155     Apr. 28, 2010      Apr. 27, 2011
  SCHWARZBECK
  HORN Antenna
                                  BBHA 9120D             9120D-408     Jan. 06, 2011      Jan. 05, 2012
  SCHWARZBECK
  HORN Antenna
                                   BBHA 9170            BBHA9170243    Dec. 27, 2010 Dec. 26, 2011
  SCHWARZBECK
  Preamplifier
                                     8449B              3008A01961     Nov. 02, 2010      Nov. 01, 2011
  Agilent
  Preamplifier
                                     8447D              2944A10738     Nov. 02, 2010      Nov. 01, 2011
  Agilent
  RF signal cable
                                SUCOFLEX 104              274041/4     Aug. 21, 2010 Aug. 20, 2011
  HUBER+SUHNNER
  RF signal cable
                                SUCOFLEX 104              283397/4     Aug. 21, 2010 Aug. 20, 2011
  HUBER+SUHNNER
  Software                      ADT_Radiated_
                                                            NA               NA                 NA
  ADT.                           V7.6.15.9.2
  Antenna Tower
                                    MA 4000               010303             NA                 NA
  inn-co GmbH
  Antenna Tower Controller
                                    CO2000                019303             NA                 NA
  inn-co GmbH
  Turn Table
                                     TT100.             TT93021704           NA                 NA
  ADT.
  Turn Table Controller
                                     SC100.             SC93021704           NA                 NA
  ADT.
   NOTE:     1. The calibration interval of the above test instruments is 12 months and the calibrations
             are traceable to NML/ROC and NIST/USA.
          2. The test was performed in HwaYa Chamber 4.
          3. The horn antenna and HP preamplifier (model: 8449B) are used only for the
            measurement of emission frequency above 1GHz if tested.
          4. The FCC Site Registration No. is 988962.
          5. The IC Site Registration No. is IC7450F-4.




Report No.: RF110318C06                            14                             Report Format Version 4.0.0


4.1.3 TEST PROCEDURES

a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at
   a 3 meter semi-anechoic chamber. The table was rotated 360 degrees to
   determine the position of the highest radiation.
b. The EUT was set 3 meters away from the interference-receiving antenna, which
   was mounted on the top of a variable-height antenna tower.
c. The antenna is a broadband antenna, and its height is varied from one meter to
   four meters above the ground to determine the maximum value of the field
   strength. Both horizontal and vertical polarizations of the antenna are set to make
   the measurement.
d. For each suspected emission, the EUT was arranged to its worst case and then
   the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table
   was turned from 0 degrees to 360 degrees to find the maximum reading.
e. The test-receiver system was set to Peak Detect Function and Specified
   Bandwidth with Maximum Hold Mode.
f. If the emission level of the EUT in peak mode was lower than the limit specified,
   then testing could be stopped and the peak values of the EUT would be reported.
   Otherwise the emissions would be re-tested one by one using peak, quasi-peak
   or average method as specified and then reported in a data sheet.
NOTE:
1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for
   Quasi-peak detection at frequency below 1GHz.
2. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and video bandwidth is
   3MHz for Peak detection at frequency above 1GHz.
3. All modes of operation were investigated and the worst-case emissions are reported.



4.1.4 DEVIATION FROM TEST STANDARD

No deviation.




Report No.: RF110318C06                        15                         Report Format Version 4.0.0


4.1.5 TEST SETUP




For the actual test configuration, please refer to the attached file (Test Setup Photo).


4.1.6 EUT OPERATING CONDITIONS

a. Plugged the EUT to the notebook and placed on a testing table.
b. Set the transmitter part of EUT under transmission condition continuously at
   specific channel frequency.




Report No.: RF110318C06                    16                        Report Format Version 4.0.0


4.1.7 TEST RESULTS
ABOVE 1GHz DATA
EUT TEST CONDITION                                        MEASUREMENT DETAIL

CHANNEL                        Channel 1                  FREQUENCY RANGE             1 ~ 25GHz
INPUT POWER                                               DETECTOR                    Peak (PK)
                               120Vac, 60Hz
(SYSTEM)                                                  FUNCTION                    Average (AV)
ENVIRONMENTAL                  25deg. C, 65%RH
                                                          TESTED BY                   David Huang
CONDITIONS                     992 hPa


                  ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
                    EMISSION                                               TABLE                    CORRECTION
                                     LIMIT                     ANTENNA                 RAW VALUE
NO. FREQ. (MHz)      LEVEL                    MARGIN (dB)                   ANGLE                      FACTOR
                                   (dBuV/m)                   HEIGHT (m)                 (dBuV)
                    (dBuV/m)                                               (Degree)                     (dB/m)
  1     2379.00      42.9 PK         74.0        -31.1          1.09 H       16           13.00         29.90
  2     2379.00      32.4 AV         54.0        -21.6          1.09 H       16           2.50          29.90
  3     2390.00      41.6 PK         74.0        -32.4          1.09 H       16           11.70         29.90
  4     2390.00      30.9 AV         54.0        -23.1          1.09 H       16           1.00          29.90
  5     2398.00      41.6 PK         74.0        -32.4          1.09 H       16           11.70         29.90
  6     2398.00      30.6 AV         54.0        -23.4          1.09 H       16           0.70          29.90
  7     2400.00      48.4 PK         74.0        -25.6          1.09 H       16           18.50         29.90
  8     2400.00       2.0 AV         54.0        -52.0          1.09 H       16           -27.90        29.90
  9    *2403.00      92.0 PK        114.0        -22.0          1.09 H       16           62.10         29.90
 10    *2403.00      45.6 AV         94.0        -48.4          1.09 H       16           15.70         29.90
 11     4806.00      55.1 PK         74.0        -18.9          1.15 H       130          25.20         29.90
 12     4806.00       8.7 AV         54.0        -45.3          1.15 H       130          -21.20        29.90


REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m).
         2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB).
         3. The other emission levels were very low against the limit.
         4. Margin value = Emission level – Limit value.
         5. “ * “ : Fundamental frequency
         6. The average value of fundamental frequency is: Average = Peak value + 20log(Duty
            cycle) Where the duty factor is calculated from following formula:
            20 log (Duty cycle) = 20 log (0.48 ms / 100 ms) = -46.4 dB
            Please see page 21 for plotted duty.




Report No.: RF110318C06                                  17                             Report Format Version 4.0.0


EUT TEST CONDITION                                        MEASUREMENT DETAIL
CHANNEL                        Channel 1                  FREQUENCY RANGE             1 ~ 25GHz
INPUT POWER                                               DETECTOR                    Peak (PK)
                               120Vac, 60Hz
(SYSTEM)                                                  FUNCTION                    Average (AV)
ENVIRONMENTAL                  25deg. C, 65%RH
                                                          TESTED BY                   David Huang
CONDITIONS                     992 hPa


                    ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
                    EMISSION                                               TABLE                    CORRECTION
                                     LIMIT                     ANTENNA                 RAW VALUE
NO. FREQ. (MHz)      LEVEL                    MARGIN (dB)                   ANGLE                      FACTOR
                                   (dBuV/m)                   HEIGHT (m)                 (dBuV)
                    (dBuV/m)                                               (Degree)                     (dB/m)

  1     2379.00      43.1 PK         74.0        -30.9          1.35 V       185          12.10         31.00
  2     2379.00      33.0 AV         54.0        -21.0          1.35 V       185          2.00          31.00
  3     2390.00      41.5 PK         74.0        -32.5          1.35 V       185          10.40         31.10
  4     2390.00      30.3 AV         54.0        -23.7          1.35 V       185          -0.80         31.10
  5     2398.00      40.5 PK         74.0        -33.5          1.35 V       185          9.40          31.10
  6     2398.00      29.7 AV         54.0        -24.3          1.35 V       185          -1.40         31.10
  7     2400.00      47.8 PK         74.0        -26.2          1.35 V       185          16.70         31.10
  8     2400.00       1.4 AV         54.0        -52.6          1.35 V       185          -29.70        31.10
  9    *2403.00      91.4 PK        114.0        -22.6          1.59 V       201          60.30         31.10
 10    *2403.00      45.0 AV         94.0        -49.0          1.59 V       201          13.90         31.10
 11     4806.00      56.6 PK         74.0        -17.4          1.31 V       257          19.40         37.20
 12     4806.00      10.2 AV         54.0        -43.8          1.31 V       257          -27.00        37.20


REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m).
         2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB).
         3. The other emission levels were very low against the limit.
         4. Margin value = Emission level – Limit value.
         5. “ * “ : Fundamental frequency
         6. The average value of fundamental frequency is: Average = Peak value + 20log(Duty
            cycle) Where the duty factor is calculated from following formula:
            20 log (Duty cycle) = 20 log (0.48 ms / 100 ms) = -46.4 dB
            Please see page 21 for plotted duty.




Report No.: RF110318C06                                  18                             Report Format Version 4.0.0


EUT TEST CONDITION                                        MEASUREMENT DETAIL
CHANNEL                        Channel 38                 FREQUENCY RANGE             1 ~ 25GHz
INPUT POWER                                               DETECTOR                    Peak (PK)
                               120Vac, 60Hz
(SYSTEM)                                                  FUNCTION                    Average (AV)
ENVIRONMENTAL                  25deg. C, 65%RH
                                                          TESTED BY                   David Huang
CONDITIONS                     992 hPa


                  ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
                    EMISSION                                               TABLE                    CORRECTION
                                     LIMIT                     ANTENNA                 RAW VALUE
NO. FREQ. (MHz)      LEVEL                    MARGIN (dB)                   ANGLE                      FACTOR
                                   (dBuV/m)                   HEIGHT (m)                 (dBuV)
                    (dBuV/m)                                               (Degree)                     (dB/m)

  1     2390.00      40.5 PK         74.0        -33.5          1.07 H       13           9.40          31.10
  2     2390.00      29.5 AV         54.0        -24.5          1.07 H       13           -1.60         31.10
  3    *2440.00      92.2 PK        114.0        -21.8          1.06 H       14           61.00         31.20
  4    *2440.00      45.8 AV         94.0        -48.2          1.06 H       14           14.60         31.20
  5     4880.00      55.4 PK         74.0        -18.6          1.14 H       134          18.10         37.30
  6     4880.00       9.0 AV         54.0        -45.0          1.14 H       134          -28.30        37.30
                    ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
                    EMISSION                                               TABLE                    CORRECTION
                                     LIMIT                     ANTENNA                 RAW VALUE
NO. FREQ. (MHz)      LEVEL                    MARGIN (dB)                   ANGLE                      FACTOR
                                   (dBuV/m)                   HEIGHT (m)                 (dBuV)
                    (dBuV/m)                                               (Degree)                     (dB/m)
  1     2390.00      43.3 PK         74.0        -30.7          1.59 V       200          12.20         31.10
  2     2390.00      32.7 AV         54.0        -21.3          1.59 V       200          1.60          31.10
  3    *2440.00      91.1 PK        114.0        -22.9          1.59 V       200          59.90         31.20
  4    *2440.00      44.7 AV         94.0        -49.3          1.59 V       200          13.50         31.20
  5     4880.00      56.9 PK         74.0        -17.1          1.28 V       259          19.60         37.30
  6     4880.00      10.5 AV         54.0        -43.5          1.28 V       259          -26.80        37.30


REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m).
         2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB).
         3. The other emission levels were very low against the limit.
         4. Margin value = Emission level – Limit value.
         5. “ * “ : Fundamental frequency
         6. The average value of fundamental frequency is: Average = Peak value + 20log(Duty
            cycle) Where the duty factor is calculated from following formula:
            20 log (Duty cycle) = 20 log (0.48 ms / 100 ms) = -46.4 dB
            Please see page 21 for plotted duty.




Report No.: RF110318C06                                  19                             Report Format Version 4.0.0


EUT TEST CONDITION                                        MEASUREMENT DETAIL
CHANNEL                        Channel 78                 FREQUENCY RANGE             1 ~ 25GHz
INPUT POWER                                               DETECTOR                    Peak (PK)
                               120Vac, 60Hz
(SYSTEM)                                                  FUNCTION                    Average (AV)
ENVIRONMENTAL                  25deg. C, 65%RH
                                                          TESTED BY                   David Huang
CONDITIONS                     992 hPa


                  ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
                    EMISSION                                               TABLE                    CORRECTION
                                     LIMIT                     ANTENNA                 RAW VALUE
NO. FREQ. (MHz)      LEVEL                    MARGIN (dB)                   ANGLE                      FACTOR
                                   (dBuV/m)                   HEIGHT (m)                 (dBuV)
                    (dBuV/m)                                               (Degree)                     (dB/m)

  1    *2480.00      92.5 PK        114.0        -21.5          1.37 H       129          61.10         31.40
  2    *2480.00      46.1 AV         94.0        -47.9          1.37 H       129          14.70         31.40
  3     2483.50      48.0 PK         74.0        -26.0          1.37 H       129          16.60         31.40
  4     2483.50       1.6 AV         54.0        -52.4          1.37 H       129          -29.80        31.40
  5     2485.50      42.0 PK         74.0        -32.0          1.37 H       129          10.60         31.40
  6     2485.50      31.4 AV         54.0        -22.6          1.37 H       129          0.00          31.40
  7     4960.00      55.3 PK         74.0        -18.7          1.30 H       245          17.80         37.50
  8     4960.00       8.9 AV         54.0        -45.1          1.30 H       245          -28.60        37.50
                    ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
                    EMISSION                                               TABLE                    CORRECTION
                                    LIMIT                     ANTENNA                  RAW VALUE
NO. FREQ. (MHz)      LEVEL                    MARGIN (dB)                   ANGLE                      FACTOR
                                   (dBuV/m)                   HEIGHT (m)                 (dBuV)
                    (dBuV/m)                                               (Degree)                     (dB/m)

  1    *2480.00      91.3 PK        114.0        -22.7          1.27 V       202          59.90         31.40
  2    *2480.00      44.9 AV         94.0        -49.1          1.27 V       202          13.50         31.40
  3     2483.50      47.7 PK         74.0        -26.3          1.27 V       202          16.30         31.40
  4     2483.50       1.3 AV         54.0        -52.7          1.27 V       202          -30.10        31.40
  5     2485.50      42.0 PK         74.0        -32.0          1.27 V       202          10.60         31.40
  6     2485.50      30.4 AV         54.0        -23.6          1.27 V       202          -1.00         31.40
  7     4960.00      57.6 PK         74.0        -16.4          1.20 V       267          20.10         37.50
  8     4960.00      11.2 AV         54.0        -42.8          1.20 V       267          -26.30        37.50


REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m).
         2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB).
         3. The other emission levels were very low against the limit.
         4. Margin value = Emission level – Limit value.
         5. “ * “ : Fundamental frequency
         6. The average value of fundamental frequency is: Average = Peak value + 20log(Duty
            cycle) Where the duty factor is calculated from following formula:
            20 log (Duty cycle) = 20 log (0.48 ms / 100 ms) = -46.4 dB
            Please see page 21 for plotted duty.




Report No.: RF110318C06                                  20                             Report Format Version 4.0.0


                      20 log (Duty cycle) = 20 log (0.24*2 ms / 100 ms) = -46.4 dB




Report No.: RF110318C06                            21                           Report Format Version 4.0.0


BELOW 1GHz WORST-CASE DATA
EUT TEST CONDITION                                    MEASUREMENT DETAIL
CHANNEL                    Channel 78                 FREQUENCY RANGE             Below 1000MHz
INPUT POWER                                           DETECTOR
                           120Vac, 60Hz                                           Quasi-Peak
(SYSTEM)                                              FUNCTION
ENVIRONMENTAL              25deg. C, 65%RH
                                                      TESTED BY                   David Huang
CONDITIONS                 992 hPa


                  ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M
                    EMISSION                                           TABLE                    CORRECTION
                                LIMIT                     ANTENNA                  RAW VALUE
NO. FREQ. (MHz)      LEVEL                MARGIN (dB)                   ANGLE                      FACTOR
                               (dBuV/m)                   HEIGHT (m)                 (dBuV)
                    (dBuV/m)                                           (Degree)                     (dB/m)

  1     142.67       22.6 QP     43.5        -20.9          1.00 H       16           7.70          14.90
  2     265.16       31.2 QP     46.0        -14.8          1.00 H       211          17.10         14.10
  3     333.21       24.7 QP     46.0        -21.3          1.00 H       151          8.30          16.40
  4     405.15       22.1 QP     46.0        -23.9          1.00 H       298          3.30          18.80
  5     527.64       23.0 QP     46.0        -23.0          1.00 H       238          1.00          22.00
  6     624.85       22.1 QP     46.0        -23.9          1.00 H       10           -1.90         24.00
                    ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M
                    EMISSION                                           TABLE                    CORRECTION
                                 LIMIT                     ANTENNA                 RAW VALUE
NO. FREQ. (MHz)      LEVEL                MARGIN (dB)                   ANGLE                      FACTOR
                               (dBuV/m)                   HEIGHT (m)                 (dBuV)
                    (dBuV/m)                                           (Degree)                     (dB/m)

  1      53.23       21.3 QP     40.0        -18.7          1.00 V       280          7.10          14.20
  2     142.67       30.2 QP     43.5        -13.3          1.00 V       184          15.30         14.90
  3     265.16       17.6 QP     46.0        -28.4          1.00 V       271          3.50          14.10
  4     480.97       22.3 QP     46.0        -23.7          1.00 V       241          1.50          20.80
  5     527.64       25.0 QP     46.0        -21.0          1.00 V       196          3.00          22.00
  6     624.85       26.8 QP     46.0        -19.2          1.00 V       196          2.80          24.00


REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m).
         2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB).
         3. The other emission levels were very low against the limit.
         4. Margin value = Emission level – Limit value.




Report No.: RF110318C06                              22                             Report Format Version 4.0.0


4.2 CONDUCTED EMISSION MEASUREMENT


4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT


     FREQUENCY OF EMISSION (MHz)                            CONDUCTED LIMIT (dBµV)

                                                       Quasi-peak                   Average
                  0.15 ~ 0.5                            66 to 56                    56 to 46
                   0.5 ~ 5                                56                          46
                    5 ~ 30                                60                          50
NOTE:        1. The lower limit shall apply at the transition frequencies.
             2. The limit decreases in line with the logarithm of the frequency in the range of 0.15
                to 0.50 MHz.
             3. All emanations from a class A/B digital device or system, including any network of
                conductors and apparatus connected thereto, shall not exceed the level of field
                strengths specified above.




4.2.2 TEST INSTRUMENTS


   DESCRIPTION &                                                      DATE OF        DUE DATE OF
                               MODEL NO.         SERIAL NO.
   MANUFACTURER                                                     CALIBRATION      CALIBRATION
Test Receiver
                                ESCS30             100289           Nov. 23, 2010     Nov. 22, 2011
ROHDE & SCHWARZ
RF signal cable
                                 5D-FB        Cable-HYCO2-01        Dec. 30, 2010     Dec. 29, 2011
Woken
LISN
                                ESH2-Z5            100100           Jan. 06, 2011     Jan. 05, 2012
ROHDE & SCHWARZ
LISN
                                ESH3-Z5            100311           Jul. 08, 2010      Jul. 07, 2011
ROHDE & SCHWARZ
V-LISN
                             NNBL 8226-2          8226-142          Jul. 12, 2010      Jul. 11, 2011
SCHWARZBECK
Software                       ADT_Cond_
                                                       NA                NA                  NA
ADT                              V7.3.7
NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are
          traceable to NML/ROC and NIST/USA.
      2. The test was performed in HwaYa Shielded Room 2.
      3. The VCCI Site Registration No. is C-2047.




Report No.: RF110318C06                           23                            Report Format Version 4.0.0


4.2.3 TEST PROCEDURES

a. The EUT was placed 0.4 meters from the conducting wall of the shielded room
   with EUT being connected to the power mains through a line impedance
   stabilization network (LISN). Other support units were connected to the power
   mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling
   impedance for the measuring instrument.
b. Both lines of the power mains connected to the EUT were checked for maximum
   conducted interference.
c. The frequency range from 150kHz to 30MHz was searched. Emission levels
   under (Limit - 20dB) was not recorded.

NOTE: All modes of operation were investigated and the worst-case emissions are reported.




4.2.4 DEVIATION FROM TEST STANDARD


No deviation.




Report No.: RF110318C06                         24                           Report Format Version 4.0.0


4.2.5 TEST SETUP

                                 Ve rt ic a l G ro u n d
                                 R e fe re n c e P la n e                                         Te s t R e c e iv e r


                                  EUT
                  40cm




                                                               80cm
                  L IS N



                                                                               H o r iz o n ta l G ro u n d
                                                                                R e fe re n c e P la n e

                   N o te : 1 .S u p p o rt u n its w e re c o n n e c te d to s e c o n d L IS N .
                            2 .B o t h o f L IS N s ( A M N ) a re 8 0 c m fro m E U T a n d a t le a s t 8 0
                               fr o m o th e r u n its a n d o th e r m e ta l p la n e s




For the actual test configuration, please refer to the attached file (Test Setup Photo).




4.2.6 EUT OPERATING CONDITIONS

Same as 4.1.6.




Report No.: RF110318C06                                      25                                       Report Format Version 4.0.0


4.2.7 TEST RESULTS

  CONDUCTED WORST-CASE DATA

   PHASE                    Line 1                         6dB BANDWIDTH       9kHz

                                                       Emission
            Freq.         Corr.      Reading Value                     Limit             Margin
                                                         Level
    No                    Factor       [dB (uV)]       [dB (uV)]      [dB (uV)]             (dB)
           [MHz]           (dB)       Q.P.    AV.     Q.P.    AV.    Q.P.    AV.       Q.P.        AV.
     1     0.177           0.15      52.35     -     52.50     -    64.61 54.61       -12.11        -
     2     0.236           0.15      42.94     -     43.09     -    62.24 52.24       -19.14        -
     3     0.295           0.16      38.20     -     38.36     -    60.40 50.40       -22.04        -
     4     4.168           0.33      38.78     -     39.11     -    56.00 46.00       -16.89        -
     5     4.930           0.36      32.95     -     33.31     -    56.00 46.00       -22.69        -
     6     25.109          1.23      31.55     -     32.78     -    60.00 50.00       -27.22        -


REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually.
         2. "-": The Quasi-peak reading value also meets average limit and
             measurement with the average detector is unnecessary.
         3. The emission levels of other frequencies were very low against the limit.
         4. Margin value = Emission level - Limit value
         5. Correction factor = Insertion loss + Cable loss
         6. Emission Level = Correction Factor + Reading Value.




Report No.: RF110318C06                               26                        Report Format Version 4.0.0


   PHASE                    Line 2                         6dB BANDWIDTH       9kHz

                                                       Emission
            Freq.         Corr.      Reading Value                     Limit             Margin
                                                         Level
    No                    Factor       [dB (uV)]       [dB (uV)]      [dB (uV)]            (dB)
           [MHz]           (dB)       Q.P.    AV.     Q.P.    AV.    Q.P.    AV.       Q.P.       AV.
     1     0.173           0.16      51.12     -     51.28     -    64.79 54.79       -13.51       -
     2     0.236           0.17      41.73     -     41.90     -    62.24 52.24       -20.33       -
     3     2.168           0.24      33.00     -     33.24     -    56.00 46.00       -22.76       -
     4     3.633           0.30      39.96     -     40.26     -    56.00 46.00       -15.74       -
     5     5.152           0.35      37.17     -     37.52     -    60.00 50.00       -22.48       -
     6     23.488          1.00      32.93     -     33.93     -    60.00 50.00       -26.07       -


REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually.
         2. "-": The Quasi-peak reading value also meets average limit and
             measurement with the average detector is unnecessary.
         3. The emission levels of other frequencies were very low against the limit.
         4. Margin value = Emission level - Limit value
         5. Correction factor = Insertion loss + Cable loss
         6. Emission Level = Correction Factor + Reading Value.




Report No.: RF110318C06                               27                        Report Format Version 4.0.0


 4.3    BAND EDGES MEASUREMENT

4.3.1 LIMITS OF BAND EDGES MEASUREMENT

Below –50dB of the highest emission level of operating band (in 100kHz Resolution
Bandwidth).


4.3.2 TEST INSTRUMENTS

       DESCRIPTION &                                           DATE OF              DUE DATE OF
                             MODEL NO.       SERIAL NO.
       MANUFACTURER                                          CALIBRATION            CALIBRATION

 SPECTRUM ANALYZER
                                FSP40           100040         Jul. 17, 2010         Jul. 16, 2011
 R&S

NOTE: The calibration interval of the above test instruments is 12 months and the calibrations are
      traceable to NML/ROC and NIST/USA.



4.3.3 TEST PROCEDURE

The transmitter output was connected to the spectrum analyzer via a low lose cable.
Set both RBW and VBW of spectrum analyzer to 100 kHz and 300 kHz with suitable
frequency span including 100 MHz bandwidth from band edge. The band edges was
measured and recorded.
The spectrum plots are attached on the following pages.


4.3.4 DEVIATION FROM TEST STANDARD

No deviation.


4.3.5 EUT OPERATING CONDITION

The software provided by client to enable the EUT under transmission condition
continuously at lowest and highest channel frequencies individually.




Report No.: RF110318C06                         28                             Report Format Version 4.0.0


4.3.6 TEST RESULTS
The spectrum plots are attached on the following images. D1 line indicates the
highest level, and D2 line indicates the 50dB offset below D1. It shows compliance
with the requirement in part 15.249 (d).




Report No.: RF110318C06                  29                       Report Format Version 4.0.0


Report No.: RF110318C06   30   Report Format Version 4.0.0


5. PHOTOGRAPHS OF THE TEST CONFIGURATION

Please refer to the attached file (Test Setup Photo).




Report No.: RF110318C06                    31           Report Format Version 4.0.0


6. INFORMATION ON THE TESTING LABORATORIES

We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were
founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety
consultation. Our laboratories are accredited and approved according to ISO/IEC
17025.

Copies of accreditation certificates of our laboratories obtained from approval
agencies can be downloaded from our web site: www.adt.com.tw/index.5.phtml.
If you have any comments, please feel free to contact us at the following:

Linko EMC/RF Lab                         Hsin Chu EMC/RF Lab
Tel: 886-2-26052180                      Tel: 886-3-5935343
Fax: 886-2-26051924                      Fax: 886-3-5935342


Hwa Ya EMC/RF/Safety Telecom Lab
Tel: 886-3-3183232
Fax: 886-3-3185050


Web Site: www.adt.com.tw

The address and road map of all our labs can be found in our web site also.




Report No.: RF110318C06                  32                       Report Format Version 4.0.0


7. APPENDIX A - MODIFICATIONS RECORDERS FOR
   ENGINEERING CHANGES TO THE EUT BY THE LAB

No any modifications are made to the EUT by the lab during the test.


---END---




Report No.: RF110318C06                  33                      Report Format Version 4.0.0



Document Created: 2011-04-13 18:53:59
Document Modified: 2011-04-13 18:53:59

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC