Test Report

FCC ID: PRDPRINTER001

Test Report

Download: PDF
FCCID_938761

FCC TEST REPORT REPORT NO. : RF970318L12 MODEL NO. : PR1 (refer to item 3.1 for more details) RECEIVED : Mar. 27, 2008 TESTED : Mar. 31, ~ Apr. 21, 2008 ISSUED : Apr. 25, 2008 APPLICANT : Acrox Technologies Co., Ltd ADDRESS : 8F, No. 437, Rui Guang RD., Nei Hu Dist., Taipei 114, Taiwan, R.O.C. ISSUED BY : Advance Data Technology Corporation LAB ADDRESS : No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang 244, Taipei Hsien, Taiwan, R.O.C. TEST LOCATION : No. 19, Hwa Ya 2nd Rd., Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 23 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF, A2LA or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF970318L12 1 Report Format Version 2.1.0

Table of Contents 1. CERTIFICATION ...........................................................................................................3 2. SUMMARY OF TEST RESULTS ...................................................................................4 2.1 MEASUREMENT UNCERTAINTY ................................................................................4 3. GENERAL INFORMATION............................................................................................5 3.1 GENERAL DESCRIPTION OF EUT..............................................................................5 3.2 DESCRIPTION OF TEST MODES................................................................................6 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST ...........................................................6 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................................7 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ...............................................8 3.4 DESCRIPTION OF SUPPORT UNITS ..........................................................................8 4. TEST TYPES AND RESULTS .......................................................................................9 4.1 RADIATED EMISSION MEASUREMENT .....................................................................9 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT...................................................9 4.1.2 TEST INSTRUMENTS ................................................................................................10 4.1.3 TEST PROCEDURES ................................................................................................. 11 4.1.4 DEVIATION FROM TEST STANDARD ....................................................................... 11 4.1.5 TEST SETUP ..............................................................................................................12 4.1.6 EUT OPERATING CONDITIONS ................................................................................12 4.1.7 TEST RESULTS ..........................................................................................................13 4.2 CONDUCTED EMISSION MEASUREMENT ..............................................................18 4.3 BAND EDGES MEASUREMENT ................................................................................18 4.3.1 LIMITS OF BAND EDGES MEASUREMENT .............................................................18 4.3.2 TEST INSTRUMENTS ................................................................................................18 4.3.3 TEST PROCEDURE ...................................................................................................18 4.3.4 DEVIATION FROM TEST STANDARD .......................................................................18 4.3.5 EUT OPERATING CONDITION ..................................................................................18 4.3.6 TEST RESULTS ..........................................................................................................19 5. PHOTOGRAPHS OF THE TEST CONFIGURATION..................................................21 6. INFORMATION ON THE TESTING LABORATORIES ................................................22 7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB.........................................................................................23 Report No.: RF970318L12 2 Report Format Version 2.1.0

1. CERTIFICATION PRODUCT: Wireless Stopwatch Presenter with Laser Pointer (refer to item 3.1 for more details) MODEL: PR1 (refer to item 3.1 for more details) BRAND: ACROX APPLICANT: Acrox Technologies Co., Ltd TESTED: Mar. 31, ~ Apr. 21, 2008 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart C (Section 15.249) ANSI C63.4-2003 The above equipment (model: PR1, PR2) have been tested by Advance Data Technology Corporation, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Apr. 25, 2008 Joanna Wang / Senior Specialist TECHNICAL ACCEPTANCE : , DATE: Apr. 25, 2008 Responsible for RF Long Chen / Senior Engineer APPROVED BY : , DATE: Apr. 25, 2008 Gary Chang / Assistant Manager Report No.: RF970318L12 3 Report Format Version 2.1.0

2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15, Subpart C (Section 15.249) STANDARD TEST TYPE RESULT REMARK PARAGRAPH Power supply is 3Vdc from 15.207 Conducted Emission Test NA battery Radiated Emission Test 15.209 Band Edge Measurement Meet the requirement of limit. 15.249 Limit: 50dB less than the peak value of PASS Minimum passing margin is 15.249 (d) fundamental frequency or meet radiated -1.33dB at 2447.000MHz. emission limit in section 15.209 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: MEASUREMENT FREQUENCY UNCERTAINTY 30MHz ~ 200MHz 3.34 dB 200MHz ~1000MHz 3.35 dB Radiated emissions 1GHz ~ 18GHz 2.26 dB 18GHz ~ 40GHz 1.94 dB This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Report No.: RF970318L12 4 Report Format Version 2.1.0

3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT Wireless Stopwatch Presenter with Laser Pointer EUT (refer to NOTE 1 for more details) MODEL NO. PR1 (refer to NOTE 1 for more details) FCC ID PRDPRINTER001 POWER SUPPLY 3Vdc form battery (1.5Vdc x 2) MODULATION TYPE QFSK FREQUENCY RANGE 2405 ~ 2477 MHz NUMBER OF CHANNEL 73 ANTENNA TYPE Printed antenna with -3.53dBi DATA CABLE NA I/O PORT NA ACCESSORY DEVICES NA NOTE: 1. A set of the EUT include transmitter and receiver, and has the following models for marketing differentiation: MODEL NAME PRODUCT NAME REMARK PR1 With LCD display Wireless Stopwatch Presenter with Laser Pointer VP4560 Base on model PR1 PR2 Without LCD display Wireless Presenter with Laser Pointer VP4550 Base on model PR2 2. The above EUT information was declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. Report No.: RF970318L12 5 Report Format Version 2.1.0

3.2 DESCRIPTION OF TEST MODES 73 channels are provided to this EUT: Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) 1 2405.00 26 2430.00 51 2455.00 2 2406.00 27 2431.00 52 2456.00 3 2407.00 28 2432.00 53 2457.00 4 2408.00 29 2433.00 54 2458.00 5 2409.00 30 2434.00 55 2459.00 6 2410.00 31 2435.00 56 2460.00 7 2411.00 32 2436.00 57 2461.00 8 2412.00 33 2437.00 58 2462.00 9 2413.00 34 2438.00 59 2463.00 10 2414.00 35 2439.00 60 2464.00 11 2415.00 36 2440.00 61 2465.00 12 2416.00 37 2441.00 62 2466.00 13 2417.00 38 2442.00 63 2467.00 14 2418.00 39 2443.00 64 2468.00 15 2419.00 40 2444.00 65 2469.00 16 2420.00 41 2445.00 66 2470.00 17 2421.00 42 2446.00 67 2471.00 18 2422.00 43 2447.00 68 2472.00 19 2423.00 44 2448.00 69 2473.00 20 2424.00 45 2449.00 70 2474.00 21 2425.00 46 2450.00 71 2475.00 22 2426.00 47 2451.00 72 2476.00 23 2427.00 48 2452.00 73 2477.00 24 2428.00 49 2453.00 25 2429.00 50 2454.00 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST EUT (Power from battery) *Test table Report No.: RF970318L12 6 Report Format Version 2.1.0

3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL EUT APPLICABLE TO CONFIGURE DESCRIPTION MODE RE≥1G RE<1G PLC BM A √ √ NOTE 1 √ Model: PR1 B - √ NOTE 1 - Model: PR2 Where PLC: Power Line Conducted Emission RE<1G: Radiated Emission below 1GHz RE≥1G: Radiated Emission above 1GHz BM: Bandedge Measurement NOTE: 1. No need to concern of Conducted Emission due to the EUT is powered by battery. NOTE: 2. “-” means no effect. RADIATED EMISSION TEST (ABOVE 1 GHz):  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, XYZ axis and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGUR AVAILABLE TESTED CHANNEL MODULATION TYPE AXIS MODE CHANNEL A 1 to 73 1, 43, 73 QFSK X RADIATED EMISSION TEST (BELOW 1 GHz):  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, XYZ axis and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGUR AVAILABLE TESTED CHANNEL MODULATION TYPE AXIS MODE CHANNEL A, B 1 to 73 43 QFSK X BANDEDGE MEASUREMENT:  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGUR MODE AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE A 1 to 73 1, 73 QFSK Report No.: RF970318L12 7 Report Format Version 2.1.0

3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (Section 15.249) ANSI C63.4-2003 All test items have been performed and recorded as per the above standards. NOTE: The EUT is also considered as a kind of computer peripheral, because the connection to computer is necessary for typical use. It has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. 3.4 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit. Report No.: RF970318L12 8 Report Format Version 2.1.0

4. TEST TYPES AND RESULTS 4.1 RADIATED EMISSION MEASUREMENT 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT Emissions radiated outside of the specified bands, shall be according to the general radiated limits in 15.209, 15.249 as following: 15.209 Limit Frequencies Field strength Measurement distance (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 15.249 Limit Field Strength of Field Strength of Fundamental Fundamental Harmonics Frequency (millivolts/meter) (microvolts/meter) 902 ~ 928 MHz 50 500 2400 ~ 2483.5 MHz 50 500 5725 ~ 5875 MHz 50 500 24 ~ 24.25 GHz 250 2500 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. As shown in 15.35(b), for frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF970318L12 9 Report Format Version 2.1.0

4.1.2 TEST INSTRUMENTS DESCRIPTION & CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER UNTIL Test Receiver ESCI 100424 Jul. 27, 2008 ROHDE & SCHWARZ Spectrum Analyzer E4446A MY44360128 Dec. 06, 2008 Agilent BILOG Antenna VULB9168 9168-160 May 31, 2008 SCHWARZBECK HORN Antenna 9120D 9120D-209 Jun. 28, 2008 SCHWARZBECK HORN Antenna BBHA 9170 BBHA9170243 Dec. 24, 2008 SCHWARZBECK Preamplifier 8447D 2944A10633 Oct. 28, 2008 Agilent Preamplifier 8449B 3008A01964 Oct. 23, 2008 Agilent RF signal cable SUCOFLEX 104 283402/4 Dec. 06, 2008 HUBER+SUHNNER RF signal cable SUCOFLEX 104 251644/4 Dec. 06, 2008 HUBER+SUHNNER Software ADT_Radiated_V7.6 NA NA ADT. Antenna Tower MA 4000 013303 NA inn-co GmbH Antenna Tower Controller CO2000 017303 NA inn-co GmbH Turn Table TT100. TT93021703 NA ADT. Turn Table Controller SC100. SC93021703 NA ADT. NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Chamber 3. 3. The horn antenna and HP preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 4. The FCC Site Registration No. is 988962. 5. The IC Site Registration No. is IC3789B-3. Report No.: RF970318L12 10 Report Format Version 2.1.0

4.1.3 TEST PROCEDURES a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. f. If the emission level of the EUT in peak mode was lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and video bandwidth is 3MHz for Peak detection at frequency above 1GHz. 3. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 DEVIATION FROM TEST STANDARD No deviation. Report No.: RF970318L12 11 Report Format Version 2.1.0

4.1.5 TEST SETUP For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT OPERATING CONDITIONS Set the EUT under transmission condition continuously at specific channel frequency. Report No.: RF970318L12 12 Report Format Version 2.1.0

4.1.7 TEST RESULTS ABOVE 1GHz WORST-CASE DATA EUT TEST CONDITION MEASUREMENT DETAIL FREQUENCY CHANNEL Channel 1 1 ~ 25GHz RANGE DETECTOR Peak (PK) MODULATION TYPE QFSK FUNCTION Average (AV) ENVIRONMENTAL 25deg. C, 65%RH, TEST MODE A CONDITIONS 1016hPa TESTED BY Dean Wang ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 43.75 PK 74.00 -30.25 1.11 H 200 11.51 32.24 2 2390.00 30.38 AV 54.00 -23.62 1.11 H 200 -1.86 32.24 3 2399.50 36.14 PK 74.00 -37.86 1.11 H 200 3.86 32.28 4 2399.50 36.01 AV 54.00 -17.99 1.11 H 200 3.73 32.28 5 *2405.00 92.14 PK 114.00 -21.86 1.11 H 200 59.84 32.30 6 *2405.00 92.01 AV 94.00 -1.99 1.11 H 200 59.71 32.30 7 4810.00 51.79 PK 74.00 -22.21 1.06 H 313 13.71 38.08 8 4810.00 44.02 AV 54.00 -9.98 1.06 H 313 5.94 38.08 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 43.27 PK 74.00 -30.73 1.71 V 177 11.03 32.24 2 2390.00 29.98 AV 54.00 -24.02 1.71 V 177 -2.26 32.24 3 2399.50 29.39 PK 74.00 -44.61 1.71 V 177 -2.89 32.28 4 2399.50 29.18 AV 54.00 -24.82 1.71 V 177 -3.10 32.28 5 *2405.00 85.39 PK 114.00 -28.61 1.71 V 177 53.09 32.30 6 *2405.00 58.07 AV 94.00 -8.93 1.71 V 177 25.77 32.30 7 4810.00 51.17 PK 74.00 -22.83 1.13 V 31 13.09 38.08 8 4810.00 42.99 AV 54.00 -11.01 1.13 V 31 4.91 38.08 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. “ * “ : Fundamental frequency Report No.: RF970318L12 13 Report Format Version 2.1.0

EUT TEST CONDITION MEASUREMENT DETAIL FREQUENCY CHANNEL Channel 43 1 ~ 25GHz RANGE DETECTOR Peak (PK) MODULATION TYPE QFSK FUNCTION Average (AV) ENVIRONMENTAL 25deg. C, 65%RH, TEST MODE A CONDITIONS 1016hPa TESTED BY Dean Wang ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2447.00 92.83 PK 114.00 -21.17 1.10 H 206 60.39 32.44 2 *2447.00 92.67 AV 94.00 -1.33 1.10 H 206 60.23 32.44 3 4894.00 52.46 PK 74.00 -21.54 1.20 H 275 14.06 38.40 4 4894.00 45.14 AV 54.00 -8.86 1.20 H 275 6.74 38.40 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2447.00 86.05 PK 114.00 -27.95 1.72 V 175 53.61 32.44 2 *2447.00 85.72 AV 94.00 -8.28 1.72 V 175 53.28 32.44 3 4894.00 51.79 PK 74.00 -22.21 1.07 V 156 13.39 38.40 4 4894.00 44.21 AV 54.00 -9.79 1.07 V 156 5.81 38.40 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. “ * “ : Fundamental frequency Report No.: RF970318L12 14 Report Format Version 2.1.0

EUT TEST CONDITION MEASUREMENT DETAIL FREQUENCY CHANNEL Channel 73 1 ~ 25GHz RANGE DETECTOR Peak (PK) MODULATION TYPE QFSK FUNCTION Average (AV) ENVIRONMENTAL 25deg. C, 65%RH, TEST MODE A CONDITIONS 1016hPa TESTED BY Dean Wang ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2477.00 91.76 PK 114.00 -22.24 1.10 H 202 59.23 32.53 2 *2477.00 91.53 AV 94.00 -2.47 1.10 H 202 59.00 32.53 3 2483.50 35.26 PK 74.00 -38.74 1.10 H 202 2.70 32.56 4 2483.50 35.03 AV 54.00 -18.97 1.10 H 202 2.47 32.56 5 4954.00 51.27 PK 74.00 -22.73 1.04 H 179 12.76 38.51 6 4954.00 42.71 AV 54.00 -11.29 1.04 H 179 4.20 38.51 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2477.00 84.96 PK 114.00 -29.04 1.68 V 185 52.43 32.53 2 *2477.00 84.72 AV 94.00 -9.28 1.68 V 185 52.19 32.53 3 2483.50 34.68 PK 74.00 -39.32 1.68 V 185 2.12 32.56 4 2483.50 34.27 AV 54.00 -19.73 1.68 V 185 1.71 32.56 5 4954.00 50.76 PK 74.00 -23.24 1.06 V 224 12.25 38.51 6 4954.00 41.98 AV 54.00 -12.02 1.06 V 224 3.47 38.51 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. “ * “ : Fundamental frequency Report No.: RF970318L12 15 Report Format Version 2.1.0

RADIATED WORST-CASE DATA: BELOW 1GHz EUT TEST CONDITION MEASUREMENT DETAIL FREQUENCY CHANNEL Channel 43 Below 1000MHz RANGE DETECTOR MODULATION TYPE QFSK Quasi-Peak FUNCTION ENVIRONMENTAL 25deg. C, 65%RH, TEST MODE A CONDITIONS 1016hPa TESTED BY Brad Wu ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 103.78 18.47 QP 43.50 -25.03 2.00 H 22 7.81 10.65 2 243.77 16.96 QP 46.00 -29.04 1.50 H 106 3.75 13.21 3 375.98 25.15 QP 46.00 -20.85 1.00 H 265 8.07 17.08 4 648.18 23.37 QP 46.00 -22.63 1.00 H 46 -0.18 23.55 5 782.34 25.47 QP 46.00 -20.53 2.00 H 196 -0.33 25.80 6 955.38 28.66 QP 46.00 -17.34 1.50 H 40 0.31 28.36 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 99.89 21.56 QP 43.50 -21.94 1.50 V 340 11.38 10.18 2 206.83 22.07 QP 43.50 -21.43 1.50 V 199 10.50 11.56 3 235.99 21.59 QP 46.00 -24.41 1.50 V 217 8.72 12.87 4 570.41 20.92 QP 46.00 -25.08 1.50 V 163 -0.83 21.74 5 764.84 26.02 QP 46.00 -19.98 1.00 V 220 0.30 25.72 6 935.94 27.46 QP 46.00 -18.54 2.00 V 67 -0.66 28.12 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: RF970318L12 16 Report Format Version 2.1.0

EUT TEST CONDITION MEASUREMENT DETAIL FREQUENCY CHANNEL Channel 43 Below 1000MHz RANGE DETECTOR MODULATION TYPE QFSK Quasi-Peak FUNCTION ENVIRONMENTAL 25deg. C, 65%RH, TEST MODE B CONDITIONS 1016hPa TESTED BY Brad Wu ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 51.29 20.05 QP 40.00 -19.95 1.50 H 7 5.26 14.79 2 348.76 24.47 QP 46.00 -21.53 1.00 H 253 8.03 16.44 3 403.20 22.01 QP 46.00 -23.99 1.50 H 295 4.26 17.75 4 659.85 23.78 QP 46.00 -22.22 1.00 H 109 0.07 23.71 5 757.06 25.24 QP 46.00 -20.76 2.00 H 37 -0.44 25.68 6 967.05 28.57 QP 54.00 -25.43 1.00 H 334 0.13 28.44 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 99.89 21.89 QP 43.50 -21.61 1.50 V 304 11.71 10.18 2 199.05 20.45 QP 43.50 -23.05 1.50 V 187 9.11 11.34 3 230.16 21.54 QP 46.00 -24.46 1.50 V 10 8.94 12.61 4 350.71 18.09 QP 46.00 -27.91 1.00 V 202 1.60 16.49 5 523.75 20.55 QP 46.00 -25.45 1.00 V 304 -0.19 20.74 6 910.66 28.16 QP 46.00 -17.84 1.50 V 10 0.41 27.75 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: RF970318L12 17 Report Format Version 2.1.0

4.2 CONDUCTED EMISSION MEASUREMENT NA 4.3 BAND EDGES MEASUREMENT 4.3.1 LIMITS OF BAND EDGES MEASUREMENT Below –50dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.3.2 TEST INSTRUMENTS DESCRIPTION & MANUFACTURER MODEL NO. SERIAL NO. CALIBRATED UNTIL SPECTRUM ANALYZER FSP40 100040 Jun. 28, 2008 NOTE: The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 4.3.3 TEST PROCEDURE The transmitter output was connected to the spectrum analyzer via a low lose cable. Set both RBW and VBW of spectrum analyzer to 100 kHz and 100 kHz with suitable frequency span including 100 MHz bandwidth from band edge. The band edges was measured and recorded. The spectrum plots are attached on the following pages. 4.3.4 DEVIATION FROM TEST STANDARD No deviation. 4.3.5 EUT OPERATING CONDITION The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF970318L12 18 Report Format Version 2.1.0

4.3.6 TEST RESULTS The spectrum plots are attached on the following 4 images. D1 line indicates the highest level, and D2 line indicates the 50dB offset below D1. It shows compliance with the requirement in part 15.249 (d). Report No.: RF970318L12 19 Report Format Version 2.1.0

Report No.: RF970318L12 20 Report Format Version 2.1.0

5. PHOTOGRAPHS OF THE TEST CONFIGURATION Please refer to the attached file (Test Setup Photo). Report No.: RF970318L12 21 Report Format Version 2.1.0

6. INFORMATION ON THE TESTING LABORATORIES We, ADT Corp., were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved by the following approval agencies according to ISO/IEC 17025. USA FCC, UL, A2LA Germany TUV Rheinland Japan VCCI Norway NEMKO Canada INDUSTRY CANADA, CSA R.O.C. TAF, BSMI, NCC Netherlands Telefication Singapore GOST-ASIA(MOU) Russia CERTIS(MOU) Copies of accreditation certificates of our laboratories obtained from approval agencies can be downloaded from our web site: www.adt.com.tw/index.5/phtml. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF Lab Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26051924 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety Telecom Lab Tel: 886-3-3183232 Fax: 886-3-3185050 Web Site: www.adt.com.tw The address and road map of all our labs can be found in our web site also Report No.: RF970318L12 22 Report Format Version 2.1.0

7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No any modifications are made to the EUT by the lab during the test. Report No.: RF970318L12 23 Report Format Version 2.1.0


Document Created: 2008-04-29 18:04:29
Document Modified: 2008-04-29 18:04:29
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC