Test Report - 15B

FCC ID: PRDMUWIRTRE04

Test Report

Download: PDF
FCCID_1339799

FCC 15B TEST REPORT REPORT NO. : FD990811C15 MODEL NO. : MRP (Refer to item 3.1 for more details) RECEIVED : Aug. 11, 2010 TESTED : Aug. 12 ~ Aug. 14, 2010 ISSUED : Aug. 18, 2010 APPLICANT : Acrox Technologies Co., Ltd ADDRESS : 4F., No. 89, Minshan St., Neihu Dist., Taipei City 114, Taiwan, R.O.C. ISSUED BY : Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS : No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION : No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 27 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product, certification, approval or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Report No.: FD990811C15 1 Report Format Version 3.0.1

Table of Contents 1. CERTIFICATION .....................................................................................................3 2. SUMMARY OF TEST RESULTS .............................................................................4 2.1 MEASUREMENT UNCERTAINTY ..........................................................................4 3. GENERAL INFORMATION......................................................................................5 3.1 GENERAL DESCRIPTION OF EUT........................................................................5 3.2 DESCRIPTION OF TEST MODES..........................................................................6 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST .....................................................7 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ..........................8 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS .........................................9 3.4 DESCRIPTION OF SUPPORT UNITS ..................................................................10 4. TEST TYPES AND RESULTS ............................................................................... 11 4.1 RADIATED EMISSION MEASUREMENT ............................................................. 11 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT........................................... 11 4.1.2 TEST INSTRUMENTS ..........................................................................................12 4.1.3 TEST PROCEDURES ...........................................................................................14 4.1.4 DEVIATION FROM TEST STANDARD .................................................................14 4.1.5 TEST SETUP ........................................................................................................15 4.1.6 EUT OPERATING CONDITIONS ..........................................................................15 4.1.7 TEST RESULTS ....................................................................................................16 4.2 CONDUCTED EMISSION MEASUREMENT ........................................................20 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT......................................20 4.2.2 TEST INSTRUMENTS ..........................................................................................20 4.2.3 TEST PROCEDURES ...........................................................................................21 4.2.4 DEVIATION FROM TEST STANDARD .................................................................21 4.2.5 TEST SETUP ........................................................................................................22 4.2.6 EUT OPERATING CONDITIONS ..........................................................................22 4.2.7 TEST RESULTS ....................................................................................................23 5. PHOTOGRAPHS OF THE TEST CONFIGURATION............................................25 6. INFORMATION ON THE TESTING LABORATORIES ..........................................26 7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB .................................................................27 Report No.: FD990811C15 2 Report Format Version 3.0.1

1. CERTIFICATION PRODUCT: Wireless Blue Trace Mouse MODEL NO.: MRP (Refer to item 3.1 for more details) BRAND: ACROX (Refer to item 3.1 for more details) APPLICANT: Acrox Technologies Co., Ltd TESTED: Aug. 12 ~ Aug. 14, 2010 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart B, Class B ICES-003: 2004 ANSI C63.4-2003 The above equipment (model: MRP) have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Aug. 18, 2010 Ivy Lin / Specialist TECHNICAL ACCEPTANCE : , DATE: Aug. 18, 2010 Responsible for RF Long Chen / Senior Engineer APPROVED BY : , DATE: Aug. 18, 2010 Gary Chang / Assistant Manager Report No.: FD990811C15 3 Report Format Version 3.0.1

2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: STANDARD TEST TYPE RESULT REMARKS SECTION Meet the requirement of limit. Conducted emission FCC Part 15, Subpart B, PASS Minimum passing margin is test -16.98dB at 0.220MHz. Class B Meet the requirement of limit. ICES-003: 2004 Radiated emission PASS Minimum passing margin is test -2.3dB at 799.78MHz. 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: MEASUREMENT FREQUENCY UNCERTAINTY Conducted emissions 150kHz~30MHz 2.44dB 30MHz ~ 1GHz 3.84dB Radiated emissions Above 1GHz 2.26dB This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Report No.: FD990811C15 4 Report Format Version 3.0.1

3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT EUT 2.4GHz Wireless Receiver MODEL NO. MRP (Refer to Note for more details) POWER SUPPLY 5Vdc MODULATION TYPE GFSK DATA RATE 1Mbps OPERATING FREQUENCY 2403 ~ 2480MHz NUMBER OF CHANNEL 78 ANTENNA TYPE Printed antenna DATA CABLE NA I/O PORT NA ACCESSORY DEVICES NA NOTE: 1. The models as below are electrically identical, different brand names and models no. are for marketing purpose. Brand Name Model No. MRP ACROX, Lexma MRN 2. The EUT has transmitter and receiver functions. 3. The above EUT information was declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. Report No.: FD990811C15 5 Report Format Version 3.0.1

3.2 DESCRIPTION OF TEST MODES 78 channels are provided to this EUT. Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) 1 2403 27 2429 53 2455 2 2404 28 2430 54 2456 3 2405 29 2431 55 2457 4 2406 30 2432 56 2458 5 2407 31 2433 57 2459 6 2408 32 2434 58 2460 7 2409 33 2435 59 2461 8 2410 34 2436 60 2462 9 2411 35 2437 61 2463 10 2412 36 2438 62 2464 11 2413 37 2439 63 2465 12 2414 38 2440 64 2466 13 2415 39 2441 65 2467 14 2416 40 2442 66 2468 15 2417 41 2443 67 2469 16 2418 42 2444 68 2470 17 2419 43 2445 69 2471 18 2420 44 2446 70 2472 19 2421 45 2447 71 2473 20 2422 46 2448 72 2474 21 2423 47 2449 73 2475 22 2424 48 2450 74 2476 23 2425 49 2451 75 2477 24 2426 50 2452 76 2478 25 2427 51 2453 77 2479 26 2428 52 2454 78 2480 Report No.: FD990811C15 6 Report Format Version 3.0.1

3.2.1 CONFIGURATION OF SYSTEM UNDER TEST FOR CONDCUTED AND RADIATED EMISSION ABOVE 1GHz TEST Modem Notebook Printer EUT (Power from host equipment) *Test table FOR RADIATED EMISSION BELOW 1GHz TEST LCD Notebook Modem Printer Monitor EUT (Power from host equipment) *Test Table 2.4GHz Wireless Mouse Report No.: FD990811C15 7 Report Format Version 3.0.1

3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL EUT APPLICABLE TO CONFIGURE DESCRIPTION MODE RE≥1G RE<1G PLC - √ √ √ - Where PLC: Power Line Conducted Emission RE<1G: Radiated Emission below 1GHz RE≥1G: Radiated Emission above 1GHz RADIATED EMISSION TEST (ABOVE 1 GHz):  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE 1 to 78 1, 38, 78 GFSK RADIATED EMISSION TEST (BELOW 1 GHz):  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE 1 to 78 78 GFSK POWER LINE CONDUCTED EMISSION TEST:  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE 1 to 78 78 GFSK TEST CONDITION: INPUT POWER APPLICABLE TO ENVIRONMENTAL CONDITIONS TESTED BY (SYSTEM) RE≥1G 25deg. C, 65%RH, 1008 hPa 120Vac, 60Hz Antony Lee RE<1G 25deg. C, 64%RH, 1008 hPa 120Vac, 60Hz Daniel Lin PLC 25deg. C, 67%RH, 1007 hPa 120Vac, 60Hz Sun Lin Report No.: FD990811C15 8 Report Format Version 3.0.1

3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart B, Class B ICES-003: 2004 ANSI C63.4-2003 All test items have been performed and recorded as per the above standards. Report No.: FD990811C15 9 Report Format Version 3.0.1

3.4 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. FORCONDUCTED AND RADIATED EMISSION ABOVE 1GHz TEST NO. PRODUCT BRAND MODEL NO. SERIAL NO. FCC ID 1 NOTEBOOK DELL D820 21498926752 NA 2 PRINTER EPSON LQ-300+ DCGY047265 FCC DoC Approved 3 MODEM ACEEX 1414V/3 0401008253 IFAXDM1414 NO. SIGNAL CABLE DESCRIPTION OF THE ABOVE SUPPORT UNITS 1 NA 2 1.8m braid shielded wire, DB25 connector, w/o core. 3 1.2m braid shielded wire, DB25 & DB9 connector, w/o core. NOTE: All power cords of the above support units are non-shielded (1.8m). FOR RADIATED EMISSION BELOW 1GHz TEST NO. PRODUCT BRAND MODEL NO. SERIAL NO. FCC ID 1 NOTEBOOK DELL D610 DRMTH1S E2K5HCKT 24" LCD CN-0G293H-74261- 2 DELL 2408FPb FCC DoC Approved MONITOR 874-237S-A00 3 MODEM ACEEX 1414V/3 0401008272 IFAXDM1414 4 PRINTER EPSON LQ-300+ DCGY054146 FCC DoC Approved 2.4GHZ 5 WIRELESS ACROX G1W NA PRDOPWIRWMU22 MOUSE NO. SIGNAL CABLE DESCRIPTION OF THE ABOVE SUPPORT UNITS 1 NA 2 1.8m braid shielded wire, D-SUB connector, with two cores. 3 1.2m braid shielded wire, DB25 & DB9 connector, w/o core. 4 1.8m braid shielded wire, DB25 connector, w/o core. 5 NA NOTE: 1. All power cords of the above support units are non-shielded (1.8m). 2. Item 5 was provided by the client. Report No.: FD990811C15 10 Report Format Version 3.0.1

4. TEST TYPES AND RESULTS 4.1 RADIATED EMISSION MEASUREMENT 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT Emissions radiated outside of the specified bands, shall be according to the general radiated limits in 15.109 as following: FREQUENCIES FIELD STRENGTH MEASUREMENT (MHz) (microvolts/meter) DISTANCE (meters) 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. As shown in 15.35(b), for frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Class A (at 10m) Class B (at 10m) Frequency (MHz) Quasi-peak (dBuV/m) Quasi-peak (dBuV/m) 30-230 40 30 230-1000 47 37 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. All emanations from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above. Report No.: FD990811C15 11 Report Format Version 3.0.1

4.1.2 TEST INSTRUMENTS FOR FREQUENCY ABOVE 1 GHz DESCRIPTION & DATE OF DUE DATE OF MODEL NO. SERIAL NO. MANUFACTURER CALIBRATION CALIBRATION Test Receiver ESI7 838496/016 Dec. 29, 2009 Dec. 28, 2010 ROHDE & SCHWARZ Spectrum Analyzer FSP40 100039 Jan. 11, 2010 Jan. 10, 2011 ROHDE & SCHWARZ BILOG Antenna VULB9168 9168-155 Apr. 28, 2010 Apr. 27, 2011 SCHWARZBECK HORN Antenna BBHA 9120D 9120D-408 Jan. 05, 2010 Jan. 04, 2011 SCHWARZBECK HORN Antenna BBHA 9170 BBHA9170242 Dec. 25, 2009 Dec. 24, 2010 SCHWARZBECK Preamplifier 8449B 3008A01961 Nov. 04, 2009 Nov. 03, 2010 Agilent Preamplifier 8447D 2944A10738 Nov. 04, 2009 Nov. 03, 2010 Agilent RF signal cable SUCOFLEX 104 274041/4 Aug. 28, 2009 Aug. 27, 2010 HUBER+SUHNNER RF signal cable SUCOFLEX 104 283397/4 Aug. 28, 2009 Aug. 27, 2010 HUBER+SUHNNER Software ADT_Radiated_ NA NA NA ADT. V7.6.15.9.2 Antenna Tower MA 4000 010303 NA NA inn-co GmbH Antenna Tower Controller CO2000 019303 NA NA inn-co GmbH Turn Table TT100. TT93021704 NA NA ADT. Turn Table Controller SC100. SC93021704 NA NA ADT. NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Chamber 4. 3. The horn antenna and HP preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 4. The FCC Site Registration No. is 988962. 5. The IC Site Registration No. is IC7450F-4. Report No.: FD990811C15 12 Report Format Version 3.0.1

FOR FREQUENCY BELOW 1 GHz DESCRIPTION & DATE OF DUE DATE OF MODEL NO. SERIAL NO. MANUFACTURER CALIBRATION CALIBRATION Test Receiver ESIB7 100186 Dec. 11, 2009 Dec. 10, 2010 ROHDE & SCHWARZ Test Receiver ESIB7 100187 Sep. 18, 2009 Sep. 17, 2010 ROHDE & SCHWARZ Spectrum Analyzer FSP40 100269 Dec. 31, 2009 Dec. 30, 2010 ROHDE & SCHWARZ BILOG Antenna VULB9168 9168-148 Apr. 27, 2010 Apr. 26, 2011 SCHWARZBECK BILOG Antenna VULB9168 9168-149 Apr. 27, 2010 Apr. 26, 2011 SCHWARZBECK HORN Antenna 3115 5623 Jul. 13, 2010 Jul. 12, 2011 EMCO Preamplifier 8447D 2944A10636 Dec. 10, 2009 Dec. 09, 2010 Agilent Preamplifier 8447D 2944A10637 Dec. 10, 2009 Dec. 09, 2010 Agilent Preamplifier 8449B 3008A01959 Dec. 10, 2009 Dec. 09, 2010 Agilent RF signal cable 8D-FB Cable-Hych1-01 Oct. 24, 2009 Oct. 23, 2010 Woken RF signal cable 8D-FB Cable-Hych1-02 Oct. 24, 2009 Oct. 23, 2010 Woken Software ADT_Radiated_ NA NA NA ADT V 7.7.03.6 Antenna Tower(V) MFA-440 9707 NA NA Antenna Tower(H) MFA-440 970705 NA NA Turn Table DS430 50303 NA NA Controller MF7802 074 NA NA Controller MF7802 08093 NA NA RF signal cable HP 160S-29 NA Feb. 12, 2010 Feb. 11, 2011 EAST COST Microwave NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Chamber 1. 3. The FCC Site Registration No. is 477732. 4. The IC Site Registration No. is IC 7450F-1. 5. The VCCI Site Registration No. is R-1893, G-113. Report No.: FD990811C15 13 Report Format Version 3.0.1

4.1.3 TEST PROCEDURES a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 / 10 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 / 10 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. f. If the emission level of the EUT in peak mode was lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and video bandwidth is 3MHz for Peak detection at frequency above 1GHz. 3. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 DEVIATION FROM TEST STANDARD No deviation. Report No.: FD990811C15 14 Report Format Version 3.0.1

4.1.5 TEST SETUP For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT OPERATING CONDITIONS a. Plugged the EUT to notebook and placed on a testing table. b. Set the transmitter part of EUT under receiving condition continuously at specific channel frequency. c. The necessary accessories enable the EUT in full functions. Report No.: FD990811C15 15 Report Format Version 3.0.1

4.1.7 TEST RESULTS ABOVE 1GHz DATA EUT TEST CONDITION MEASUREMENT DETAIL CHANNEL Channel 1 FREQUENCY RANGE 1 ~ 12.5GHz INPUT POWER DETECTOR Peak (PK) 120 Vac, 60 Hz (SYSTEM) FUNCTION Average (AV) ENVIRONMENTAL 25deg. C, 65%RH TESTED BY Antony Lee CONDITIONS 1008 hPa ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 1802.00 42.6 PK 74.0 -31.4 1.00 H 271 11.50 31.10 2 1802.00 29.3 AV 54.0 -24.7 1.00 H 271 -1.80 31.10 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 1802.00 40.6 PK 74.0 -33.4 1.00 V 29 9.50 31.10 2 1802.00 29.8 AV 54.0 -24.2 1.00 V 29 -1.30 31.10 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: FD990811C15 16 Report Format Version 3.0.1

EUT TEST CONDITION MEASUREMENT DETAIL CHANNEL Channel 38 FREQUENCY RANGE 1 ~ 12.5GHz INPUT POWER DETECTOR Peak (PK) 120 Vac, 60 Hz (SYSTEM) FUNCTION Average (AV) ENVIRONMENTAL 25deg. C, 65%RH TESTED BY Antony Lee CONDITIONS 1008 hPa ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 1830.00 42.6 PK 74.0 -31.4 1.00 H 265 11.40 31.20 2 1830.00 29.3 AV 54.0 -24.7 1.00 H 265 -1.90 31.20 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 1830.00 40.6 PK 74.0 -33.4 1.00 V 39 9.40 31.20 2 1830.00 28.2 AV 54.0 -25.8 1.00 V 39 -3.00 31.20 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: FD990811C15 17 Report Format Version 3.0.1

EUT TEST CONDITION MEASUREMENT DETAIL CHANNEL Channel 78 FREQUENCY RANGE 1 ~ 12.5GHz INPUT POWER DETECTOR Peak (PK) 120 Vac, 60 Hz (SYSTEM) FUNCTION Average (AV) ENVIRONMENTAL 25deg. C, 65%RH TESTED BY Antony Lee CONDITIONS 1008 hPa ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 1860.00 42.1 PK 74.0 -31.9 1.00 H 266 10.80 31.30 2 1860.00 28.8 AV 54.0 -25.2 1.00 H 266 -2.50 31.30 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 1860.00 40.0 PK 74.0 -34.0 1.00 V 36 8.70 31.30 2 1860.00 27.9 AV 54.0 -26.1 1.00 V 36 -3.40 31.30 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: FD990811C15 18 Report Format Version 3.0.1

BELOW 1GHz WORST-CASE DATA EUT TEST CONDITION MEASUREMENT DETAIL CHANNEL Channel 78 FREQUENCY RANGE Below 1000MHz INPUT POWER DETECTOR 120 Vac, 60 Hz Quasi-Peak (SYSTEM) FUNCTION ENVIRONMENTAL 25deg. C, 64%RH TESTED BY Daniel Lin CONDITIONS 1008 hPa ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 232.16 19.1 QP 37.0 -17.9 3.50 H 36 6.63 12.43 2 271.04 21.6 QP 37.0 -15.4 3.00 H 130 7.66 13.92 3 366.29 20.4 QP 37.0 -16.6 2.50 H 281 3.61 16.79 4 500.42 20.9 QP 37.0 -16.1 3.00 H 36 0.98 19.95 5 731.74 25.3 QP 37.0 -11.7 1.50 H 21 0.93 24.41 6 797.84 28.3 QP 37.0 -8.7 1.00 H 335 2.66 25.62 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 70.82 21.7 QP 30.0 -8.3 2.00 V 225 9.78 11.92 2 138.86 22.3 QP 30.0 -7.7 1.00 V 112 8.50 13.81 3 199.12 23.5 QP 30.0 -6.5 1.00 V 108 11.81 11.70 4 232.16 28.0 QP 37.0 -9.0 1.00 V 138 14.90 13.08 5 442.10 24.2 QP 37.0 -12.8 1.00 V 292 4.71 19.48 6 644.27 27.3 QP 37.0 -9.7 3.00 V 24 3.37 23.96 7 712.30 28.7 QP 37.0 -8.3 3.00 V 143 3.69 25.00 8 799.78 34.7 QP 37.0 -2.3 2.50 V 342 7.64 27.07 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: FD990811C15 19 Report Format Version 3.0.1

4.2 CONDUCTED EMISSION MEASUREMENT 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT FREQUENCY OF EMISSION (MHz) CONDUCTED LIMIT (dBµV) Quasi-peak Average 0.15 ~ 0.5 66 to 56 56 to 46 0.5 ~ 5 56 46 5 ~ 30 60 50 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50 MHz. 3. All emanations from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above. 4.2.2 TEST INSTRUMENTS DESCRIPTION & DATE OF DUE DATE OF MODEL NO. SERIAL NO. MANUFACTURER CALIBRATION CALIBRATION Test Receiver ESCS30 100288 Sep. 24, 2009 Sep. 23, 2010 ROHDE & SCHWARZ RF signal cable 5D-FB Cable-HYCO2-01 Dec. 31, 2009 Dec. 30, 2010 Woken LISN ESH2-Z5 100100 Aug. 24, 2009 Aug. 23, 2010 ROHDE & SCHWARZ LISN ESH3-Z5 100311 Jul. 08, 2010 Jul. 07, 2011 ROHDE & SCHWARZ Software ADT_Cond_ NA NA NA ADT V7.3.7 NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Shielded Room 2. 3. The VCCI Site Registration No. is C-2047. Report No.: FD990811C15 20 Report Format Version 3.0.1

4.2.3 TEST PROCEDURES a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was not recorded. NOTE: All modes of operation were investigated and the worst-case emissions are reported. 4.2.4 DEVIATION FROM TEST STANDARD No deviation. Report No.: FD990811C15 21 Report Format Version 3.0.1

4.2.5 TEST SETUP Ve r tic a l G r o u n d R e fe r e n c e P la n e Te s t R e c e iv e r EUT 40cm 80cm L IS N H o r iz o n ta l G r o u n d R e fe re n c e P la n e N o te : 1 .S u p p o rt u n its w e r e c o n n e c te d to s e c o n d L IS N . 2 .B o th o f L IS N s ( A M N ) a r e 8 0 c m fr o m E U T a n d a t le a s t 8 0 fro m o th e r u n its a n d o th e r m e ta l p la n e s For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.2.6 EUT OPERATING CONDITIONS Same as 4.1.6. Report No.: FD990811C15 22 Report Format Version 3.0.1

4.2.7 TEST RESULTS CONDUCTED WORST-CASE DATA PHASE Line 1 6dB BANDWIDTH 9kHz Emission Corr. Reading Value Limit Margin No Freq. Level Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.170 0.16 40.06 - 40.22 - 64.98 54.98 -24.77 - 2 0.224 0.16 44.65 - 44.81 - 62.66 52.66 -17.85 - 3 0.271 0.17 34.52 - 34.69 - 61.08 51.08 -26.40 - 4 1.910 0.30 32.91 - 33.21 - 56.00 46.00 -22.79 - 5 3.723 0.34 29.79 - 30.13 - 56.00 46.00 -25.87 - 6 10.539 0.37 32.83 - 33.20 - 60.00 50.00 -26.80 - REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: FD990811C15 23 Report Format Version 3.0.1

PHASE Line 2 6dB BANDWIDTH 9kHz Emission Corr. Reading Value Limit Margin No Freq. Level Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.150 0.12 35.33 - 35.45 - 66.00 56.00 -30.55 - 2 0.220 0.13 45.69 - 45.82 - 62.81 52.81 -16.98 - 3 0.334 0.15 31.83 - 31.98 - 59.36 49.36 -27.38 - 4 0.431 0.16 26.17 - 26.33 - 57.23 47.23 -30.90 - 5 1.777 0.28 31.87 - 32.15 - 56.00 46.00 -23.85 - 6 10.773 0.47 32.63 - 33.10 - 60.00 50.00 -26.90 - REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: FD990811C15 24 Report Format Version 3.0.1

5. PHOTOGRAPHS OF THE TEST CONFIGURATION Please refer to the attached file (Test Setup Photo). Report No.: FD990811C15 25 Report Format Version 3.0.1

6. INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. Copies of accreditation certificates of our laboratories obtained from approval agencies can be downloaded from our web site: www.adt.com.tw/index.5/phtml. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab: Hsin Chu EMC/RF Lab: Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26051924 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety Telecom Lab: Tel: 886-3-3183232 Fax: 886-3-3185050 Web Site: www.adt.com.tw The address and road map of all our labs can be found in our web site also. Report No.: FD990811C15 26 Report Format Version 3.0.1

7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No any modifications are made to the EUT by the lab during the test. ---END--- Report No.: FD990811C15 27 Report Format Version 3.0.1


Document Created: 2010-08-20 11:53:56
Document Modified: 2010-08-20 11:53:56
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC