Manual

FCC ID: PRDMU73

Users Manual

Download: PDF
FCCID_4348409

V1 Final flat size: 20.625 × 5.83 in. (523.88 × 148.08 mm) FINAL NS-PMDM2019_19-0277_QSG_V1_EN.ai 1 6/6/2019 5:28:54 PM FOR PRINT Final fold size: 4.125 × 5.83 in. (104.775 × 148.08 mm) MOUSE FEATURES 3 Insert the included AA battery into the battery compartment. Make Connecting with Bluetooth DPI SWITCH KEY AND LED INDICATORS sure that the + and - signs match the symbols in the compartment. Note: You don’t need to connect the nano receiver when connecting with Bluetooth. There are five available DPI settings: The blink on the key indicates the DPI DPI switch key/ 1 Turn on Bluetooth on your computer or plug in a Bluetooth dongle. Scrolling wheel LED indicator setting in use. See your computer’s documentation for Bluetooth pairing instructions. Note: The default setting is 1600 DPI. Right button 2 Slide the power switch on your mouse to (Bluetooth). The LED QUICK SETUP GUIDE Power switch Left button indicator blinks for 10 minutes then turns off. DPI: LED INDICATOR BLINKS: Connect Dual Mode button Note: If the power switch is already on (Bluetooth), press the Connect button 600 DPI 1 Forward button instead. Backward button Battery cover 3 Select BLE 5.0 Mouse from your computer’s Bluetooth menu. When 1000 DPI 2 paired, the LED indicator turns off. Wireless Mouse AA battery 1600 DPI 3 Note: If pairing fails, repeat these steps. 2400 DPI 4 4 Replace the battery cover. 2.4G AND BLUETOOTH SWITCH LED INDICATORS 6-Button Nano receiver Tip: Store the nano receiver in the mouse when it is not in use. FUNCTION Power on DESCRIPTION LED is on for 10 seconds, then turns off. 3600 DPI 5 NS-PMDM2019 CONNECTING YOUR MOUSE TO YOUR COMPUTER Connecting with the nano receiver Low battery warning LED blinks once per second for 10 seconds, then turns off. INSTALLING THE MOUSE BATTERY AND REMOVING You can connect your mouse to your computer using either the included PACKAGE CONTENTS THE NANO RECEIVER nano receiver or by using Bluetooth. 2.4G pairing mode LED blinks for 10 seconds after pressing the Connect button. • Wireless mouse 1 Take the battery cover off. 1 Plug the nano receiver into a USB port on your computer. • Nano receiver 2 Remove the nano receiver. 2 Slide the Power switch on your mouse to 2.4G or (Bluetooth). Bluetooth pairing mode LED blinks for 10 minutes after pressing the Connect button. • AA battery (1) The computer automatically detects the mouse, and you can • Quick Setup Guide immediately begin using it. 2.4G pairing failed After pressing the Connect button, the LED blinks for Pull 10 seconds, then turns off. SYSTEM REQUIREMENTS Bluetooth pairing After pressing the Connect button, the LED blinks for • Windows® 10, Windows® 8.1, Windows® 8, Mac OS 10.X or higher, or failed 10 minutes, then turns off. Chrome OS • One available USB port 2.4G pairing successful After pressing the Connect button, the LED blinks once per second (for up to 10 seconds). When pairing is successful, the LED turns off. Bluetooth pairing After pressing the Connect button, the LED blinks once per successful second (for up to 10 minutes). When pairing is successful, the Before using your new product, please read these instructions to prevent any damage. LED turns off.

NS-PMDM2019_19-0277_QSG_V1_EN.ai 2 6/6/2019 5:29:00 PM CLEANING YOUR MOUSE TROUBLESHOOTING • Turn off the mouse, then turn it on again. RSS-Gen and RSS-210 statement ONE-YEAR LIMITED WARRANTY • Wipe your mouse with a damp, lint-free cloth. My mouse is not working. • Disconnect any Bluetooth audio devices, such as headsets, that may be This device complies with Industry Canada license-exempt RSS standard(s). For complete warranty, visit www.insigniaproducts.com. • Make sure that your mouse is turned on. connected to your computer. Operation is subject to the following two conditions: (1) this device may • Move your mouse closer to your computer. • Switch off any other devices operating in the 2.4 GHz radio spectrum, not cause interference, and (2) this device must accept any interference, SPECIFICATIONS • Make sure that your computer meets the system requirements. such as a Wi-Fi network or mobile telephone, or move their antennas including interference that may cause undesired operation of the device. CONTACT INSIGNIA Mouse: • Only use your mouse on a clean, flat, non-slippery surface to ensure further away from your computer. Le présent appareil est conforme aux CNR d'Industrie Canada applicables 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) • Dimensions (H×W×D): 1.49 × 2.94 × 4.11 in. (3.78 × 7.45 × 10.45 cm) smooth and accurate cursor action. aux appareils radio exempts de licence. L'exploitation est autorisée aux www.insigniaproducts.com • Weight: 2.33 oz. (66 g) • Avoid using your mouse on reflective, transparent, or metallic surfaces. LEGAL NOTICES deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, • Battery: 1 AA alkaline battery • Make sure that your mouse and nano receiver are paired by pressing the All other devices shall bear the following statement in a conspicuous et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique • Battery life: 6 months (based on average usage) Connect button on the mouse. location on the device: subi, même si le brouillage est susceptible d'en compromettre le FCC Statement fonctionnement. INSIGNIA is a trademark of Best Buy and its affiliated companies • Radio frequency: 2.4Ghz • Replace your mouse battery. The LED indicator blinks for 10 seconds Distributed by Best Buy Purchasing, LLC when the battery is low. This device complies with Part 15 of the FCC Rules. Operation is subject to RSS-102 statement • Operating distance: 33 ft. (10 m) 7601 Penn Ave South, Richfield, MN 55423 U.S.A. • Unplug then reconnect the nano receiver into the USB port on your the following two conditions: (1) this device may not cause harmful This equipment complies with Industry Canada radiation exposure limits ©2019 Best Buy. All rights reserved. • Rating: 1.5V C.C. - 10mA computer, then press the Connect button on the mouse. The LED interference, and (2) this device must accept any interference received, set forth for an uncontrolled environment. Made in China • DPI: 600, 1000, 1600, 2400, 3600 indicator on the mouse flashes steadily while in pairing mode including interference that may cause undesired operation. Cet équipement est conforme à l'exposition aux rayonnements Industry • Bluetooth: v5.0 (10 seconds). After pairing successfully, the LED turns off. This equipment has been tested and found to comply with the limits for a Canada limites établies pour un environnement non contrôlé. Nano receiver: • Try connecting your nano receiver into a different USB port on your Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are RSS-Gen and RSS-247 statement • Dimension (H×W×D): .57 × .25 × .74 in. (1.45 × .625 × 1.89 cm) computer. designed to provide reasonable protection against harmful interference in This device complies with Industry Canada licence-exempt RSS standard(s). • Weight: .04 oz. (1.1 g) • Try removing or moving other wireless devices near the computer to a residential installation. This equipment generates, uses, and can radiate Operation is subject to the following two conditions: (1) this device may • Interface: USB 1.1, 2.0, 3.0 prevent interference. radio frequency energy and, if not installed and used in accordance with not cause interference, and (2) this device must accept any interference, • Make sure that that your computer is Bluetooth-enabled. the instructions, may cause harmful interference to radio communications. including interference that may cause undesired operation of the device. • Press the Connect button to reset the Bluetooth connection between However, there is no guarantee that interference will not occur in a Le présent appareil est conforme aux CNR d'Industrie Canada applicables your mouse and your computer, then re-pair your devices. particular installation. If this equipment does cause harmful interference to aux appareils radio exempts de licence. L'exploitation est autorisée aux My mouse pointer or scroll wheel is too sensitive or not sensitive radio or television reception, which can be determined by turning the deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, enough. equipment off and on, the user is encouraged to try to correct the et (2) l'utilisateur de l'appareil doit accepter tout brouillage radio électrique • Adjust the cursor or scroll wheel settings on your computer. Refer to the interference by one or more of the following measures: subi, même si le brouillage est susceptible d'en compromettre le documentation that came with your computer. • Reorient or relocate the receiving antenna. fonctionnement. • Remove any metallic objects from the line of sight between your • Increase the separation between the equipment and receiver. All other devices shall bear the following statement in a conspicuous computer and the Bluetooth mouse. • Connect the equipment into an outlet on a circuit different from that to location on the device: • If you are using a computer with a built-in Bluetooth antenna, try which the receiver is connected. reorienting the computer. • Consult the dealer or an experienced radio/TV technician for help. • If you are using a Bluetooth dongle, use a USB extension cable and place Warning: Changes or modifications not expressly approved by the party the Bluetooth dongle onto your desktop or somewhere in sight of your responsible for compliance could void the user’s authority to operate the Bluetooth mouse. equipment. • Move the mouse closer to your computer or Bluetooth dongle. V1 ENGLISH 19-0277


Document Created: 2019-06-07 13:29:35
Document Modified: 2019-06-07 13:29:35
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC